Developments in the control of fine particulate air emissions

Advanced Powder Technology

Volumn 8, Issue 3, 1997, Pages 179-215

  Darcovich, K ^a   Jonasson, K A ^a   Capes, C E ^a  

^a NATIONAL RESEARCH COUNCIL CANADA   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

AIR POLLUTION CONTROL; PARTICULATE EMISSIONS; WASTE INCINERATION;

PARTICLE CAPTURE MECHANISMS;

AIR POLLUTION CONTROL EQUIPMENT;

EID: 0030660977     PISSN: 09218831     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0921-8831(08)60463-X     Document Type: Review

References (184)

1. Environment Canada. Technology advancement program for advanced fine particle removal. Environmental Protection Service report no. TS-34 (1995). 82.
2. B. B. Crocker, D. A. Novak and W. A. Scholle. Air pollution control methods. In: Kirk-Othmer: Encyclopedia of Chemical Technology, 3rd edn, Vol. 1. Wiley, New York (1984). pp. 649-716.
3. K. V. Thambimuthu. Gas Cleaning for Advanced Coal-based Power Generation. IEA Coal Research, London (1993).
4. W. Strauss. Industrial Gas Cleaning. 2nd edn. Pergamon Press. Oxford (1975).
5. A. Tamir. Impinging-Stream Reactors. Fundamentals and Applications. Elsevier, Amsterdam (1994).
6. A. J. Buonicore and W. T. Davis (Eds). Air Pollution Engineering Manual. Van Nostrand Reinhold, New York (1992).
7. P. N. Cheremisinoff (Ed.). Air Pollution Design and Control for Industry. Marcel Dekker, New York (1993).
8. J. E. Brockmann, C. L .J. Adkins and F. Gelbard. Alternate particle removal technologies for the Airborne Activity Confinement System at the Savannah River Site. US DOE report WSRC-RP-91-0928 (1991), 108.
9. K. Schifftner. Flux Force Condensation Scrubbers for utilization on municipal solid waste incinerators. In: Joint ASME/IEEE Power Generation Conf. Dallas, TX (1989) (ASME paper 89-JPGC/ EC-5).
10. P. A. Lawless, A. S. Viner, D. S. Ensor and L. E. Sparks. Computations on the performance of particle filters and electronic air cleaners. In: 5th Int. Conf. Indoor Air Quality and Climate, Vol. 3, Toronto. Canada (1990), pp. 187-192.
11. J. van Heerden and P. Sullivan. The application of CFD for evaluation of dust suppression and auxiliary ventilating systems used with continuous miners. In: Proc. 6th US Mine Ventilation Symp. Salt Lake City. UT (1993), pp. 293-297.
12. A. Samanta, R. Bhaskar and R. Gong. Studies on the use of scrubbers in continuous miner faces. In: Proc. 6th US Mine Ventilation Symp. Salt Lake City, UT (1993), pp. 51-56.
13. P. Schmidt. Unconventional cyclone separators. Int. Chem. Eng. 33, 8-17 (1993).
14. P. Schmidt and T. Richter. Dust strands in cyclone separators at low dust concentration. Part. Sci Technol. 11, 107-113 (1993).
15. J. Plucinski, L. Gradon and J. Nowicki. Collection of aerosol particles in a cyclone with an external electric field. J. Aerosol Sci. 20, 695-700 (1989).
16. C. E. Romero, D. W. Shaw and J. S. Ontko. Particle collection efficiency of a cyclonic combustor. In: AIAA/ASME National Fluid Dynamics Congr. Los Angeles, CA (1992) (report DOE/METC/ C-92/7020).
17. J. Barrett. Spinning tube cleans up emissions. Eureka 13, 26-27 (1993).
18. C. Wadenpohl and F. Löffler An electro-mechanical two-stage system for the separation of diesel soot particles. In: Air Pollution Control: Papers from the 9th World Clean Air Congr Montreal. Canada (1992) (paper IU-18F-02)
19. National Technical Information Service, United States. Electrostatic precipitators (Latest citations from the NTIS Bibliographic Database), Feb. 1994, 250 citations document PB94-866779/XAD.
20. EPRI-Int. Soc. Electrostatic precipitation. 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation. Washington, DC (1993).
21. G. R. Offen and R. F. Altman. Issues and trends in electrostatic precipitation technology for US utilities. J. Air Waste Manage. Ass. 41, 222-227 (1991).
22. H. J. Del Gatto. Don't let ESP become Achilles' heel of compliance strategy, Power 138, 81-84 (1994).
23. R. P. Gaikwad, D. G. Sloat, R. Altman and R. L. Chang. Economic evaluation of electrostatic precipitator retrofit options. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation, Vol. 1. Washington, DC (1993).
24. R. L. Andrews, C. A. Altin and R. Salib. ESPs in the 21st Century: extinction or evolution. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation. Vol. 1. Washington, DC (1993).
25. R. A. Mastropietro and R. LeBeau. Rebuild and enlargement of existing weighted-wire ESPs as a result of coal switching. In: 5th Int. Conf. and Exhibition for the Power Generating Industries - POWER-GEN '92. Orlando, FL (1992), pp. 48-65.
26. T. Tanaka, H. Fujishima and Y. Tsuchiya. Development of advanced dust collecting system for coal-fired power plant. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation. Vol. 2. Washington, DC (1993).
27. H. Yabuta. Recent dust collection technology for utility-use boilers. Hitachi Rev. 39, 355-362 (1990)
28. G. Dinelli, V. Bogani and M. Rea. Enhanced precipitation efficiency of electrostatic precipitators by means of impulse energization. IEEE Trans. Ind. Appl. 27, 323-330 (1991).
29. N. Tachibana and Y. Matsumoto. intermittent energization on electrostatic precipitators. J. Electrostatics 25, 55-73 (1990).
30. T. Watanabe, F. Tochikubo, Y. Koizumi, J. Tsuchida, J. Hautanen and E. I. Kauppinen. Submicron particle agglomeration by an electrostatic agglomeration. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation. Vol. 1. Washington, DC (1993).
31. H. R. Falaki. Experimental study of flow diversion during the rapping of collector plates inside an electrostatic precipitator. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation, Vol. 2. Washington, DC (1993).
32. L. Lind and E. M. Bojsen. Experience with baffle-free collecting plates in an electrostatic precipitator. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation, Vol. 2. Washington, DC (1993).
33. V. S. Lee. US EPA-developed air-pollution control technology. In: 1st N. American Conf. on Emerging Clean Air Technologies and Business Opportunities. Toronto, Canada (1994).
34. V Reyes and P. Lausen. Utilization of expert computer systems for control and operation of electrostatic precipitators. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation, Vol. 2. Washington, DC (1993).
35. Anon. Use advanced controls to maximize ESP efficiency Power 135, 56-57 (1991).
36. C. Eyraud. Gas cleaning by wet electrostatic precipitation: new prospects. Filtr. Sep. 30, 637-639 (1993).
37. H. Fujishima and Y. Tsuchiya. Application of wet type electrostatic precipitator for utilities' coal-fired boiler. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation. Washington, DC (1993).
38. A. C. Sheth, J. K. Holt, J. R. Douglas and B. R. Thompson. Role of the wet electrostatic precipitator in the coal-fired magnetohydrodynamics system. In: Symp. on Engineering Aspects of Magnetohydrodynamics (SEAM 30 Proc.). Baltimore, MD (1992). pp. 9.1-9.11.
39. M. Valenti. Emission control: retrofitting process plants for the 1990s. Mech. Eng. 114, 68-74 (1992).
40. E. H. Weaver. Innovative design features for electrostatic precipitators installed on biomass fired boilers. In: Proc. 1994 Industrial Power Conf. San Francisco, CA (1994), pp. 73-85.
41. O. B. Kittelson, J. Reinertsen and J. Michalski. Further studies of electrostatic collection and agglomeration of diesel particles. In: Global Developments in Diesel Particulate Control. Warrendale, PA, Society of Automotive Engineers. Publ. P-240 (SAE tech. paper 910329) (1991), pp. 145-163.
42. R. Enema. Electrostatic precipitator performance improvement through numerical simulation. World Cement 25, 63-66 (1994).
43. W.-J. Liang and T. H. Lin. The characteristics of ionic wind and its effect on electrostatic precipitators J. Aerosol Sci. 20, 330-344 (1994).
44. M. Abdel-Salam. Influence of humidity on charge density and electric field in electrostatic precipitators. J. Phys. D. Appl. Phys. 25, 1318-1322 (1992).
45. V. H. Belba, W. T. Grubb and R. L. Chang. The potential of pulse-jet baghouses for utility boilers. Part 1: A worldwide survey of users. J. Air Waste Manage. Ass. 42, 209-213 (1992).
46. C. J. Bustard, J. M. Cushing and R. L. Chang. The potential of pulse-jet baghouses for utility boilers. Part 2: Performance of pulse-jet fabric filter pilot plants. J. Air Waste Manage. Ass. 42, 1240-1249 (1992).
47. D. G. Sloat, R. P. Gaikwad and R. L. Chang. The potential of pulse-jet baghouses for utility boilers Part 3: Comparative economics of pulse-jet baghouse, precipitators and reverse-gas baghouses. Air Waste 43, 120-128 (1993).
48. B. Svensson. Advanced fabric filters for effective emission control in the steelmaking industry. ABB Rev. 10, 23-26 (1990).
49. Anon. Advanced filtration technology to satisfy tomorrow's legislation. Filtr. Sep. 30, 37-38 (1993)
50. W. Brame. Fabric filter apparatus. Australian Pat. AU-B-35992/89 (1989).
51. T. G. Ebner, C. J. Bustard, F. J. Sagan and R. L. Chang. Design and development of a novel filter cage for improved cleaning and extended bag life. In: 10th Particulate Control Symp. and 5th Int. Conf on Electrostatic Precipitation, Vol. 1. Washington, DC (1993).
52. T. Gennrich. Filter bags help meet particulate control standards. Power Eng. 97, 37-39 (1993).
53. G. A. Kudlac, G. A. Farthing, T. Szymanski and R. Corbett. SNRB catalytic baghouse laboratory pilot testing. Environ. Prog. 11, 33-38 (1992).
54. W. T. McKenna. Filter media selection for fabric filters. Industrial boilers, CFBs, and incinerators. In: Proc. 1990 Ind. Power Conf., PWR Vol. 9. St Louis, MO (1990), pp. 9-13.
55. G. A. Brinckman. Microporous Gore-Tex® membrane filter media can help control submicron particulate matter, heavy metal, and dioxan/furan emissions. In: Air and Waste Management Ass. 85th Ann. Meeting and Exhibition. Kansas City, MO (1992) (paper 92-111.05).
56. F Noël, M. Dufour and G. Gosselin. Development of a dust collector for bark boiler exhaust gases. In: 1st N. American Conf. on Emerging Clean Air Technologies and Business Opportunities. Toronto, Canada (1994).
57. G. Gosselin. Process for removing dust from high temperature gas streams. US Pat. 5112368 (1992).
58. R. Barnes. A parametric study of the effects of textile processing variables on the filtration efficiency of a woven glass fabric. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation, Vol. 1. Washington. DC (1993).
59. L. Bergmann. Conductive fabrics in dust collectors. Staub. Reinhaltung der Luft 53, 307-309 (1993).
60. T. Grafe and G. Kelley. Baghouse and cartridge dust collectors: a comparison. Am. Cer. Soc. Bull. 72, 69-73 (1993).
61. x and particulate control using a catalyst-coated fabric filter. In: Int. Power Generation Conf. San Diego, CA (1991) (ASME paper 91-JPGC-FACT-2).
62. x and particulate control. Quarterly technical progress report, Oct. 1-Dec. 31, 1993. Report DOE/PC/90361-T13 (1994).
63. A. S. Viner, G. P. Greiner and L. S. Hovis. Advanced electrostatic stimulation of fabric filtration: performance and economics JAPCA 38, 1573-1582 (1988).
64. S. Rao and D. V. S. Murthy. Electro statically enhanced fabric filtration. CEW Chem. Eng. World 24, 21-24 (1989).
65. Y. Yamamoto. Filter for particulate materials in gaseous fluids. US Pat. 5368635 (1994).
66. National Technical Information Service, United States. Gas scrubbers (Latest citation from the NTIS Database), July 1993, 111 citations, document PB93-881811/XAD.
67. P. J. Loftus, D. B. Stickler and R. C. Diehl. Confined vortex scrubber for fine particulate removal from the flue gases. Environ. Prog. 11, 27-32 (1992).
68. K. A. Jonsson. Gas cleaning methods and apparatus. US Pat. 5076818 (1991).
69. D. P. Burford and I. G. Pearl. Initial results from the CT-121 innovative clean coal technology demonstration project at Georgia power's plant Yates. In: Proc. Joint ASME/IEEE Power Generation Conf. Kansas City, KS (1993) (ASME paper 93-JPGC-EC-12).
70. J. J. Schwab. Venturi scrubber and process. US Pat. 5279646 (1994).
71. K. D. Nguyen and D. R. Spink, Scrubber products for acid rain and air toxics control. In: 1st N. American Conf. and Exhibition: Emerging Clean Air Technologies and Business Opportunities. Toronto, Canada (1994).
72. C-C. Chen, H-K. Shu and Y-K. Yang. Nocleation-assisted process for the removal of fine aerosol particles. Ind. Eng. Chem. Res. 32, 1509-1519 (1993).
73. S. V Sheppard. Fine particle removal for hazwaste incinerators with the ionizing wet scrubber. In: 86th Ann. Meeting Air and Waste Management Association. Denver, CO (1993) (paper 93-TP51.01).
74. T. F Burger, D. M. Collins, S. M. Collins and M. R. Burger. Circulating air scrubber. Canadian Pat. 1316122 (1993).
75. L. R. Waterland, D. J. Fournier, Jr., J. W. Lee and G. J. Carroll. Trace metal fate in a rotary kiln incinerator with an ionizing wet scrubber. Waste Manage. 11, 103-109 (1991).
76. S. Sumiyoshitani. Effects of an applied electric field on collection efficiency by a charged droplet for dust particles in charged dropled scrubbers. Aerosol Sci. Tech. 20, 71-82 (1994).
77. H Polat, Q. Hu, M. Polat and S. Chander. The effect of droplet and particle charge on dust suppression by wetting agents, In: Proc 6th US Mine Ventilation Symp. Salt Lake City, UT (1993), pp 535-541.
78. E. B. Hanf and W. Ellison FGD mist eliminators for 0.002 LB/MMBTU solid particulate emission. in: Proc. Joint ASME/IEEE Power Generation Conf. Kansas City, KS (1993) (ASME paper 93-JPGC-EC-9).
79. 2 Chem. Eng Prog. 10, 23 (1994).
80. A. I Lainer, T. D. Israfilov, I. T. Elperin and V. L. Meltser. Study of counterflow trapping of alunite dust. Sov. J. Non-Ferrous Metals 48, 43-45 (1975).
81. J. Sun, B. Y. H Liu, P. H. McMurry and S. Greenwood. Method to increase control efficiencies of wet scrubbers for sobmicron particles and particulate metals. J. Air Waste Manage. Ass. 44, 184-185 (1994).
82. K. W. Wilson, J. C. Haas and M. B. Eshelman. Applications of moving granular-bed filters to advanced systems. In: Coal-fired Power Systems '93: Advances in IGCC and PFBC Review Meeting. Morgantown, WV (1993) (report DOE/MC/27423-93/C0215).
83. K. W. Wilson, J. C. Haas and M. B. Eshelman. Granular-bed and ceramic candle filters in commercial plants: a comparison Report DOE/MC/27423-3513 (1993).
84. W. Yang, R. Newby, T. Lippert and D. Keairns. MGBF concept looks good for hot gas cleanup. Modem Power Sys. 12, 21-24 (1992).
85. C. A. P. Zevenhoven, B. Scarlett and J. Andries. The filtration of PFBC combustion gas in a granular bed filter. Filtr. Sep. 29, 239-244 (1992).
86. C. A. P. Zevenhoven, K. R. G. Hein and B. Scarlett Moving granular bed filtration with electrostatic enhancement for high-temperature gas clean-up. Filtr. Sep. 30, 550-553 (1993).
87. J. S. Mei, P. C. Yue and J. S. Harlow. Fluidized-bed filtration for particulate clean-up. In: Proc. 1993 Int. Conf. on Fluidized Bed Combustion. San Diego. CA (1993), pp. 1351-1358.
88. T. C. Ho, L. Tan, C. Chen and J. R. Hopper. Metal emissions control through heterogeneous deposition during fluidized bed incineration. J. Hazard. Mater. 24, 292-293 (1990).
89. B. Neukirchen. Reduction of heavy metal and dioxan emission by means of an activated carbon filter on the hazardous waste incineration facility at RZR Herten. In: Air Pollution Control: Papers from the 9th World Clean Air Congr. Montreal. Canada (1992) (paper IU-I8E-04).
90. W. Peukert and F. Löffler. Influence of temperature on particle separation in granular bed filters. Powder Technol. 68, 263-270 (1991).
91. Y. Otani, C. Kanaoka and H. Emi. Experimental study of aerosol filtration by the granular bed over a wide range of Reynolds numbers. Aerosol Sci. Technol. 10, 463-474 (1989).
92. Sorbent Technologies Corp. Supported-sorbent injection. In: 1st N. American Conf. and Exhibition: Emerging Clean Air Technologies and Business Opportunities. Toronto, Canada (1994).
93. J. G. Toher, P. Feldman and K. S. Kumar. Circulating dry scrubbers - present and future capabilities. In: 1st N. American Conf. and Exhibition: Emerging Clean Air Technologies and Business Opportunities. Toronto, Canada (1994).
94. H. R. Paur, W. Schikarski, W. Baumann, C. H. Leichsenring, W. Linder and H. Mätzing. State of the an in electron beam dry scrubbing of flue gas. In: Air Pollution Control: Papers from the 9th World Clean Air Congr. Montreal, Canada (1992) (paper IU-18A-03).
95. P. M. Eggerstedt, J. F. Zievers and E. C. Zievers. Choose the right ceramic for filtering hot gases. Chem. Eng. Prog. 89, 62-68 (1993).
96. L. R. White, T. L. Tompkins, K. C. Hsieh and D. D. Johnson. Ceramic filters for hot gas cleanup. J. Eng. Gas Turb. Power 115, 665-669 (1993).
97. C. Butcher. Hot news in ceramic filters. Chem. Eng. (London) 505, 27-29 (1991).
98. T. W. Smith. New developments in high-efficiency particulate air filtration. Am. Cer. Soc. Bull. 72, 79-84 (1993).
99. J. Seville. Handling hot gas. Process Eng. 74, 51-54 (1993).
100. G. Ondrey and S. Moore. Gas cleaning comes out of the bag. Chem. Eng. 101, 28-31 (1994).
101. W. Cheung, J. P. K. Seville, R. Clift, C. J. Bower and A. N. Twigg. Filtration and cleaning characteristics of ceramic media. In: 4th Int. Fluidized Combustion Conf. London (1988), pp. II/9/I-II/9/14.
102. J. Stringer and A. J. Leitch. Ceramic candle filter performance at the Grimethorpe (UK) pressurized fluidized bed combustor. In: Int. Gas Turbine and Aeroengine Congr. and Exposition. Orlando, FL (1991) (ASME paper 91-GT-381).
103. J. Stringer and A. J. Leitch. Ceramic candle filter performance at the Grimethorpe (UK) pressurized fluidized bed combustor. J. Eng. Gas Turbines Power Trans. ASME 114, 371-379 (1992).
104. M. Durst, M. Müller, M. R. Schnell and A. R. Wagner. Performance of rigid ceramic filter elements in an 8.000 hour durability test at high temperatures. In: Proc. 1991 Int. Conf. on Fluidized Bed Combustion, Vol. 3. Montreal, Canada (1991), pp. 1081-1086.
105. S. Laux, B. Giernoth, H. Bulak and U. Renz. Hot gas filtration with ceramic filter elements. In: Proc. 1993 Int. Conf. on Fluidized Bed Combustion, Vol. 2. San Diego, CA (1993), pp. 1241-1251.
106. R. Clark, P. Holbrow, J. E. Oakley, K. Burnard and J. Stringer. Some recent experiences with the EPRI hot gas rigid ceramic filter at Grimethorpe PFBC establishment In: Proc. 1993 Int. Conf. on Fluidized Bed Combustion, Vol. 2. San Diego, CA (1993), pp. 1251-1258.
107. C. E. Selmer and W. T. Bakker. Evaluation of silicon carbide candle filters. In: Proc. 1993 Int. Conf. on Fluidized Bed Combustion. Vol. 2. San Diego, CA (1993), pp. 1259-1264.
108. T. Eriksson, J. Isaksson, P. Stȧlberg, E. Kurkela and V. Helanti. Durability of ceramic filters in hot gas filtration. Bioresource Technol. 46, 103-112 (1993).
109. K. R. Valentino, N. R. Brown, J. J. Brown, Jr. and W. T. Bakker. Durability testing of ceramic candle filters in PFBS environments. In: Proc. 1993 Int. Conf. on Fluidized Bed Combustion, Vol. 2. San Diego, CA (1993), pp. 1375-1383.
110. H. Leibold, F. Dirks and V. Rüdinger. Particulate emissions from a LLW incinerator and off-gas cleaning with a new type of ceramic candle filter. Waste Manage. 9, 87-94 (1989).
111. J. Jalovaara, I. Hippinen and A. Johkola. Particle removal in PFBC using a fibrous ceramic candle filter. In: Proc 1993 Int Conf. on Fluidized Bed Combustion, Vol. 2. San Diego, CA (1993), pp. 713-718.
112. R. A. Brown and A. J. Leitch. Filtration of PFBC dusts using a rigid ceramic tube type filter. In: Proc. 1993 Int. Conf. on Fluidized Bed Combustion, Vol. 2. San Diego, CA (1993), pp. 1229-1239.
113. K. Higashi and H. Maeno. The latest status of the development of the advanced ceramic tube filter. Reports Res. Asahi Glass Co., Ltd 42, 81-95 (1992).
114. J. P. K Seville, R Legros, C. M. H. Brereton. C. J. Lim and J. R. Grace. Performance of rigid ceramic filters for CFBC gas cleaning. In: Proc. 1991 Int. Conf. on Fluidized Bed Combustion, Vol. 1. Montreal, Canada (1991), pp. 279-286.
115. M. J. Modd and J. D. Hoffman. Operating data from the TIDD hot gas clean up program. In: Proc. 1993 Int. Conf. on Fluidized Bed Combustion. Vol. 2. San Diego, CA (1993), pp. 719-727.
116. T. E. Lippert, G. J. Bruck, R. A Newby and E. E. Smeltzer. Specific filter designs for PFBC. In: Coal-fired Power Systems '93: Advanced in IGCC and PFBC Review Meeting. Morgantown. WV (1993) (report DOE/MC/21023-93/C0212).
117. J. F. Zievers, P. Eggerstedt, E. C. Zievers and D. Nicolai. What affects the cost of hot gas filter stations? J. Eng. Gas Turbines Power, Trans ASME 115, 652-657 (1993).
118. C. M. Urban, L. C. Landman and R. D. Wagner Diesel car particulate control methods. In: Diesel Particulate Emissions Control. Warrendale. PA, Society of Automotive Engineers (SAE tech, paper 830084) (1983), pp. 87-96.
119. P. R. Miller, J. Scholl, S. Bagley, D. Leddy and J. H. Johnson. The effects of a porous ceremic particulate trap on the physical, chemical and biological character of diesel particulate emissions. In: Diesel Particulate Emissions Control. Warrendale, PA, Society of Automotive Engineers (SAE tech, paper 830457) (1983), pp. 159-185.
120. J. J. Tutko, S. S. Lestz, J. W. Brockmeyer and J. E. Dore. Feasibility of ceramic foam as a diesel particulate trap. In: Diesel Particulate Traps. Warrendale, PA, Society of Automotive Engineers (SAE tech. paper 840073) (1984), pp. 15-24.
121. C. Bertoli, F. E. Corciaone, N. Del Giacamo, G. Police and M. Migliaccio. Performance evaluation of particulate traps for passenger car diesel engines. In: Advances in Engine Emmision Control Technology. Presented at the I2th Ann. Energy-Sources Technology Conf. and Exhibition. Houston, TX (1989), pp. 27-35.
122. K. Takesa, T. Uchiyama and S. Enamito. Development of particulate trap system with cross flow ceramic filter and reverse cleaning regeneration. SAE Trans. 100, 428-439 (1991) (SAE tech. paper 910326).
123. K. Takesa, T. Ucchiyama and S. Enamito. Development of Asahi particulate trap system. Reports Res. Asahi Glass Co., Ltd 41, 197-214 (1991).
124. J. Kitagawa, T. Hijikata and S. Satoru. Electric heating regeneration of large wall-flow type DPF. In: Global Developments in Diesel Particulate Control. Warrendale, PA, Society of Automotive Engineers (SAE tech. paper 910136) (1991), pp. 63-71
125. A Balzotti, G. M. Cornetti, F. Pidello, M. Signe and V. Scorsone. Italian city buses with particulates traps. In: Advances in Diesel Particulate Control. Warrendale, PA, Society of Automotive Engineers (SAE tech. paper 900114) (1990), pp. 79-86.
126. S. T. Gulati, D. W. Lambert, M. B. Hoffman and A. Tuteja. Thermal durability of a ceramic wall-flow diesel filter for light duty vehicles. In: Diesel Particulate Control, Trap, and Filtration Systems. Warrendale, PA, Society of Automotive Engineers (SAE tech. paper 920143) (1992), pp. 69-79.
127. M. G. Grenier and S. G. Hardcastle. Safety and health in the Canadian mine environment. An overview of ventilation, dust, radiation and diesel emission research. CIM Bull. 83, 41-46 (1990).
128. F. B. Walton, P. J. Hayward and D. J. Wren. Controlled energy deposition in diesel particulate filters during regeneration by means of microwave irradiation. In: Advances in Diesel Particulate Control. Warrendale, PA, Society of Automotive Engineers (SAE tech. paper 900327) (1990), pp. 131-140.
129. R. F Abrams and R. L. Goldsmith. Field testing of ceramic membrane gas filters. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation. Vol. 2. Washington, DC (1993).
130. C. J. Bustard, S. M. Sjostrom, R. H. Slye and J. Foote. Application of novel filtration technologies to the MHD process. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation, Vol. 2. Washington, DC (1993).
131. R. L. Goldsmith and B. A. Bishop. Catalytic filtration device and method. US Pat. 5221484 (1993).
132. x control. Seventh quarterly technical progress report. Report DOE/PC/89805-T8, 1992.
133. R. A. Newby, T. E. Lippen, E. E. Smeltzer, A. Robertson and D. Bonk. Cross flow filter performance with second-generation PFBC carbonizer fuel gas. In: Proc. 1993 Int. Conf. on Fluidized Bed Combustion. Vol. 2. San Diego, CA (1993), pp. 703-712.
134. M. Parish and A. B. Jeffrey. Ceramic filter elements with tailored macro- and microstructures. Filtr. Sep. 32, 31-35 (1995).
135. R. Chang. Compact Hybrid Particulate Collector (COHPAC). US Pat. 5158580 (1992).
136. L. Lamarre. COHPing with particulates. EPRI J. 18, 18-23 (1993).
137. A. K. Hindocha, B. Brown and R. Chang. Commercial demonstration of COHPAC. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation. Vol. 1. Washington, DC (1993).
138. K. Steinbacher, H. Schmidt and W. Leussler. Process and apparatus for purifying dust and pollutant-containing exhaust gases. Australian Pat. AU 643794 (1993).
139. K. Steinbacher, H. Schmidt and W. Leussler. Verfahren and Vorrichtung zun Reinigung staub- und schadstoffhaltiger Abgase. European Pat. EP 461695 (1991).
140. H. Sehen. Pollution emission control system. US Pat. 5171446 (1992).
141. J. Dixkens, H. Fissan and T. Dose. New particle sampling technique for direct analysis using total-reflection X-ray fluorescence spectrometry. Spectrochim. Acta 48B, 231-238 (1993).
142. R. M. Burton. Method and apparatus for sampling air contaminants. PCT Int. Pat. WO 9306910 (1993).
143. Anon. High volume particle sampling and analysis. Atmospheric Monitoring & Abatement News, July, 7 (1994).
144. D. E. Pike. Apparatus for the quantification of dust collectibility. US Pat. 5119684 (1992).
145. Anon. Choosing the correct particulate monitor for your facility. BHA Group Inc., company literature, June 14 (1994).
146. S. Rowsell. Spark detection help to prevent fires in dust collection systems. Cdn. Firefighter, July, 19 (1995).
147. K. Morris. Expert system control of fabric filters. Filtr. Sep. 28, 275-280 (1991).
148. H. V. Krigmont and E. L. Coe, Jr. Flue-gas conditioning: key advances in recent years. Power 136, 30-36 (1992).
149. D. L. Laudal and S. J. Miller. Controlling particulate emissions from coal combustion plant stacks - ammonia and sulphur trioxide gases are injected upstream of baghouse. US Pat. 5034030 (1991).
150. W. Humphries, R. Beck and A. Lowe. Effect of ammonia injection on fabric filter pressure drop. J. Air Waste Manage. Ass. 41, 1523-1527 (1991).
151. L. A. Rikhter, S. L. Chernov, A. A. Averin and S. V. Cherepov. Improving the efficiency of removal of high-resistance ash in electrostatic precipitators by chemical conditioning of flue gases. Thermal Eng. 38, 137-140 (1991).
152. R. S. Dahlin, T. R. Snyder and P. V. Bush. Effects of sorbent injection on particulate properties. Part I. Low-temperature sorbent injection. J. Air Waste Manage. Ass. 42, 1592-1602 (1992).
153. R. S. Dahlin, T. R. Snyder and P. V. Bush. Effects of sorbent injection on particulate properties. Part II. High-temperature sorbent injection. J. Air Waste Manage. Ass. 43, 91-96 (1993).
154. C. B. Sedman, R. E. Valentine and N. Plaks. Evaluation of pilot ESP performance with elevated loadings from sorbent injection processes. In: 9th Symp. on Particulate Control. Williamsburg, VA (1991) (report EPA/600D-91/244).
155. x particulate control with reagent/catalyst regeneration. Canadian Pat. 1273474 (1990).
156. G. A. Kudlac, G. A Farthing, T. Szymanski and R. Corbett. SNRB catalytic baghouse laboratory pilot testing. Environ. Prog. 11, 33-38 (1992).
157. R. A. Newby, M. A. Alvin, D. M. Bachovchin, W. C. Yang, E. E. Smeltzer and T. E. Lippert. Integrated Low Emissions Cleanup system for direct coal fueled turbines (moving bed, fluid bed contactor/ceramic filter). Twenty-fifth quarterly report, Oct.-Dec. 1993. Report DOE/MC/24257-3705 (1993).
158. P. V. Bush and T. R Snyder. Implications of particulate properties on electrostatic precipitator and fabric filter performance. Powder Technol. 72, 207-213 (1992).
159. T. R. Snyder. Fundamental mechanisms in flue gas conditioning. Quarterly report, Oct.-Dec. 1993. Report DOE/PC/90365-T13 (1994).
160. J. Magill, P. Caperan, J. Somers, K. Richter, S. Fourcaudot, P. Barraux, P. Lajarge, J. A. Gallego-Juarez, E. Riera-Franco De Sarabia, G. Rodriguez-Corral and N. Seyfert. Characteristics of an electro-acoustic precipitator (EAP). J. Aerosol Sci. 23, S803-S806 (1992).
161. A. Renoux. Action des ondes acoustiques sur les aerosols. In: Air Pollution Control: Papers from the 9th World Clean Air Congr. Montreal, Canada (1992) (paper IU-18F-05).
162. L. Song, G. R Koopman and T. L. Hoffmann. An improved theoretical model of acoustic agglomeration. J. Vib. Acoustics, Trans. ASME 116, 208-214 (1994).
163. M. A. Al-Nimr and V. S. Arpaci. Acoustical properties of interacting and agglomerated particles. J. Sound Vib. 165, 19-30 (1993).
164. T. L. Hoffmann, W. Chen, G. H. Koopman, A. W. Scaroni and L. Song. Experimental and numerical analysis of bimodal acoustic agglomeration. J. Vib. Acoustics, Trans. ASME 115, 232-240 (1993).
165. M. N. Mansour, R. R. Chandran, J. N. Duqum, A. W. Scaroni, G. H. Koopman and J. L. Loth. Particle collection enhancement by acoustics. In: Coal-fired Power Systems '93: Advances in IGCC and PFBC Review Meeting. Morgantown, WV (1993) (report DOE/MC/26288-93/C0223).
166. M. N. Mansour. Pulse combusted acoustic agglomeration apparatus and process. US Pat 5197399 (1993).
167. US DOE. Sonic Enhanced Ash Agglomeration and Sulfur Capture. Quarterly technical progress report, Sept. 1993-Jan. 1994. Report DOE/MC/26288-3688 (1993).
168. W. C. Finney and W. N. Shelton. Pulsed electron beam precharger. Final report, Sept. 1989-May 1992 (progress report). Report DOE/PC/89768-T14 (1992).
169. L. H. Hentz, F. B. Johnson and A. Baturay. Air emission studies of sewage-sludge incinerators at the western branch waste-water treatment-plant. Water Environ. Res. 64, 111-119 (1992).
170. V. J. Petti and P. Maurin. 'Clean air act compliance' trash-to-energy facilities-retrofitting for acid gas control. In: Proc. Joint ASME/IEEE Power Generation Conf. Kansas City, KS (1993) (ASME paper 93-JPGC-FACT-5).
171. H. Hackfort and J. Borchardt. Influencing and controlling ultrafine particulate emissions from a CFB-waste incinerator. J. Aerosol Sci. 23, S729-S732 (1992).
172. A. Arrowsmith and N. Ashton. Air pollution control from the mineral processing industries. Minerals Eng. 4, 1071-1080 (1991).
173. P. R. Dawson. Recent developments in iron-ore sintering. Part 4: The sintering process. Ironmaking & Steelmaking 20, 150-159 (1993).
174. US DOE. Hot gas cleanup test facility for gasification and pressurized combustion. Quarterly technical progress report, Oct.-Dec. 1992. Report DOE/MC/25140-3555 (1992).
175. W. E. Powers, M. W. Short, J. A. Evensen and B. A. Dennison. Retrofit options for controlling particulate-emissions from a magnesium sulfite recovery furnace. Tappi J. 75, 113-120 (1992).
176. D. Adair, J. L. Stafford and G. A. Raemhild. Innovative dryer and emission control systems at a particleboard installation. In: Proc. Washington State University Int. Particle-board/Composite Materials Series Symp. Pullman. WA (1990), pp. 209-225.
177. L. Nudo. Capturing heavy metals. Pollut. Eng. 25, 80-82 (1993).
178. R. McInnes, K. Jameson and D. Austin. Scrubbing toxic inorganics: particulates are controlled with baghouses or electrostatic precipitators. while nonmetallics are scrubbed. Chem. Eng. 97 (9), 116-121 (1990).
179. R. J. Cowley, B. P. Gallagher and B. M., Jr. Nee. Development and execution of a metals pretest program for a hazardous waste incinerator. Hazard. Waste Hazard. Mater. 11(1), 31-51 (1994).
180. E Cocchiarella, M. S. Greenfield and S. Chubbs. The effect of foamy slag on basic oxygen steelmaking process emissions. CIM Bull. 86 (974), 56-61 (1993).
181. C. A. Popejoy and F. R. Weintraub. A systems approach to controlling chrome electroplating emissions. In: Air Pollution Control: Papers from the 9th World Clean Air Congr. Montreal, Canada (1992) (paper IU-18E-10).
182. R. W. McIlvaine. Forecast and markets for particulate control systems. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation. Vol. 1. Washington, DC (1993).
183. P. L. Feldman and K. S. Kumar. The challenge of high-efficiency control of fine particles. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation. Vol. 2. Washington, DC (1993).
184. M. D. Durham, D. B. Holstein, R. G. Rhudy, R. F. Altman, T. A. Burnett, L. Lepovitz and G. Blythe. Performance of ESPs with small SCAs in spray dryer retrofit applications. In: 10th Particulate Control Symp. and 5th Int. Conf. on Electrostatic Precipitation, Vol. 1. Washington, DC (1993).