Gradient composites of nickel coated carbon fibre filled epoxy resin moulded under centrifugal force

Composites Part A: Applied Science and Manufacturing

Volumn 28, Issue 8, 1997, Pages 731-737

  Funabashi, Mashiro ^a  

^a NATL INST OF MAT AND CHEM RES   (Japan)

Author keywords

Centrifugal force; Gradient composites; Mould technique; Volume resistivity

Indexed keywords

CENTRIFUGATION; DENSITY (SPECIFIC GRAVITY); ELECTRIC CONDUCTIVITY MEASUREMENT; ELECTRODES; EPOXY RESINS; NICKEL; OPTICAL MICROSCOPY; PLASTICS FILLERS; PLASTICS MOLDING; VOLUME FRACTION;

FOUR PROBE METHOD; FUNCTIONALLY GRADIENT COMPOSITES; PARALLEL PLATE ELECTRODES;

CARBON FIBER REINFORCED PLASTICS;

EID: 0030653322     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-835X(97)00016-X     Document Type: Article

References (43)

1. Hirano, T. and Wakashima, K., Design of functionally gradient materials. Journal of Japanese Society of Composite Materials, 1991, 17(2), 45-52.
2. Watanabe, Y., Fukui, Y., Nakanishi, K., Takeda, Y. and Yamanaka, N., Control of composition of centrifugal force in functionally graded materials. Trans. Jpn Soc. 7 Mech. Eng., 1992, 58(A)(556), 2472-2477.
3. Funabashi, M. and Kitano, T., Electrical conductivity of carbon fiber filled epoxy resin composites molded by using centrifugal force. Sen'i Gakkaishi, 1994, 50(12), 573-580.
4. Takahashi, K., Harakawa, K., Tanaka, K. and Sakai, T., Analysis on the effect of filler orientation distribution in elastic reinforcement theory. J. Soc. Mater. Sci. Jpn, 1997, 26(291), 1232-1237.
5. Takahashi, K., Harakawa, K., Tanaka, K. and Sakai, T., The influence of filler shape, orientation distribution and interaction among fillers on elastic moduli of composites. J. Soc. Mater. Sci. Jpn, 1997, 26(291), 1238-1243.
6. Bright, P.F., Crowson, R.J. and Folkes, M.J., Study of the effect of injection speed on fibre orientation in simple mouldings of short glass fibre-filled polypropylene. J. Mater. Sci., 1978, 13, 2467-2506.
7. Folkes, M.J. and Russell, D.A.M., Orientation effects during the flow of short-fibre reinforced thermoplastics. Polymer, 1980, 21, 1252-1258.
8. Eduljee, R.F., Gillespie Jr, J.W. and Pipes, R.B., Design methodology for the molding of short-fiber thermoset composites. Compos. Sci. Technol., 1981, 33, 241-256.
9. Hirai, T., Katayama, T., Hirai, M. and Yoneda, M., Prediction for the configuration of fiber orientation in injection moulding. J. Soc. Mater. Sci. Jpn., 1985, 34(378), 256-261.
10. Doshi, S.R., Dealy, J.M. and Charrier, J.-M., Flow induced fiber orientation in an expanding channel tubing die. Polym. Eng. Sci., 1986, 26(7), 468-478.
11. Yamashita, S., Hatta, H., Sugano, T. and Murayama, K., Fiber orientation control of short fiber composites: experiment. J. Compos. Mater., 1989, 23, 32-41.
12. Hirai, T., Katayama, T., Hirai, M. and Kawatsuri, M., Prediction for the configuration of fiber orientation on box shape injection moulding. J. Soc. Mater. Sci. Jpn, 1989, 38(427), 341-346.
13. Maekawa, Z., Yamada, S. and Mizouchi, H., Expression method of fiber orientation distribution in fiber reinforced composites. J. Soc. Mater. Sci. Jpn, 1990, 39(436), 38-44.
14. Takeda, H., Fiber orientation of fiber/polymer composites. Sen'i Gakkaishi, 1991, 47(1), 52-57.
15. Takeda, H., Short fiber orientation in injection molding. Sen'i Gakkaishi, 1991, 47(2), P74-P78.
16. Kimpara, I., Non-destructive inspection of composite materials 1. General remarks. J. Jpn Soc. Compos. Mater., 1984, 10(3), 97-101.
17. Urabe, K., Non-destructive inspection of composite materials 3. Electromagnetic waves. J. Jpn Soc. Compos. Mater., 1984, 10(3), 107-110.
18. Hmurcik, L.V. and Kinsler, M.R., Van Der Pauw measurements of resistivity in plastic/metal composites. J. Compos. Mater., 1988, 22(22), 360-372.
19. Terashita, K., Mitsui, M., Lyoo, P.-J. and Miyamae, K., Continuous kneading of composite conductive plastics with stainless steel fiber filling and its evaluation. J. Soc. Mater. Sci Jpn, 1989, 38(435), 1452-1457.
20. Maeda, O., Yamaki, J. and Katayama, Y., Electric onductivity of carbon fibre composites. Kobunshi Ronbunshu, 1975, 32(1), 42-48.
21. Sideridis, E., The dynamic moduli of particulate-filled polymers as defined by the concept of interphase. Compos. Sci. Technol., 1986, 27, 305-332.
22. Funabashi, M. and Kitano, T., Electrical conductivity of carbon fiber and carbon black filled silicone oil under shear flow. Bull. Res. Inst. Polym. Textile, 1987, 156, 63-71.
23. Polley, M.H. and Boonstra, B.B.S.T., Carbon blacks for highly conductive rubber. Rubber Chem. Technol., 1957, 30, 170-179.
24. Bueche, F., A new class of switching materials. J. Appl. Phys., 1973, 44(1), 532-533.
25. Scarisbrick, R.M., Electrically conducting mixture. J. Phys. D, 1973, 6, 2098-2110.
26. Verhelst, W.F., Wolthuis, K.G., Voet, A., Ehrburger, P. and Donnet, J.B., The role of morphology and structure of carbon blacks in the electrical conductance of vulcanizates. Rubber Chem. Technol., 1977, 50, 735-746.
27. Sircar, A.K. and Lamond, T.G., Effect of carbon black particle size distribution on electrical conductivity. Rubber Chem. Technol., 1978, 51, 126-132.
28. Miyauchi, S., Sano, T., Takada, K. and Ohkita, K., Electrical properties of carbon black-graftpolymers crosslinked with epoxy resin. J. Soc. Mater. Sci. Jpn, 1979, 28(312), 894-899.
29. Shimizu, Y., Tanemura, M., Sumita, M., Miyandera, M. and Miyaska, K., Characterization of dispersion state of carbon filler in carbon black-SBR composite materials by statistical pattern processing. Sen'i Gakkaishi, 1986, 42(5), T261-T266.
30. Calleja, F.J.B, Bayer, R.K., Ezquerra, T.A., Salazar, J.M. and Zachmann, H.G., Conducting injection moulded carbon black filled polyethylene. Makromol. Chem., Macromol. Symp., 1988, 20/21, 597-600.
31. Malliaris, A. and Turner, D.T., Influence of particle size on the electrical resistivity of compacted mixtures of polymeric and metallic powders. J. Appl. Phys., 1971, 42, 614-618.
32. Matsushita, R., Senna, M. and Kuno, H., Electrical resistivity of hotpressed silver-polystyrene powder mixture. J. Mater. Sci., 1977, 12, 509-516.
33. Pike, G.E. and Seager, C.H., Percolation and conductivity: A computer study I. Phys. Rev. B, 1974, 10(4), 1421-1434.
34. Seager, C.H. and Pike, G.E., Percolation and conductivity: A computer study II. Phys. Rev. B, 1974, 10(4), 1435-1446.
35. Blackman, J.A., A theory of conductivity in disordered register network. J. Phys. C: Solid State Phys., 1976, 9, 2049-2071.
36. Erdös, P. and Haley, S.B., Random-network models of the conductance of disordered condensed matter. Phys. Rev. B, 1976, 13, 1720-1727.
37. Yoshimura, Y. and Fujihara, Y., Electric resistance as a measure for estimating randomness of binary solid particles system (edge effect). J. Soc. Mater. Sci. Jpn, 1982, 31(348), 868-872.
38. Fujihara, Y. and Yoshimura, Y., Electric resistance as a measure for estimating randomness of binary solid particles system (effect of extended system). J. Soc. Mater. Sci. Jpn, 1983, 32(360), 971-976.
39. Ueda, N. and Taya, M., Prediction of the electrical conductivity of two-dimensionally misoriented short fiber composites by a percolation model. J. Appl. Phys., 1986, 60(1), 459-461.
40. Nakama, K. and Ookita, M., Electrical conductive materials of carbon fibre reinforced plastics by using "BESFIGHT-MC". Reinforced Plastics, Jpn, 1986, 32(10), 469-474.
41. Yamashita, M. and Agu, M., Geometrical correction factor for semiconductor resistivity measurements by four-point probe method. Jpn J. Appl. Phys., 1984, 23(11), 1499-1504.
42. Horikawa, A., Chiba, K., Nishitani, K. and Ueshima, T., Falling motion of a slender body in the still liquid. Part 1 : Falling behaviors of a slender body. Sen'i Kikai Gakkaishi, 1980, 33(10), 46-54.
43. Horikawa, A., Chiba, K., Nishitani, K. and Ueshima, T., Falling motion of a slender body in the still liquid. Part 2: Influence of different factors on the falling behavior of a slender body. Sen'i Kikai Gakkaishi, 1980, 34(6), 39-49.