The use of machining features in set-up planning fixture design to interface CAD to CAPP

International Journal of Vehicle Design

Volumn 18, Issue 5, 1997, Pages 558-573

  Ozturk F ^a  

^a ULUDAG UNIVERSITY   (Turkey)

Author keywords

CAD; CAPP; Feature based design; Features; Fixture design; Set up planning

Indexed keywords

COMPUTER AIDED DESIGN; COMPUTER AIDED MANUFACTURING; COMPUTER INTEGRATED MANUFACTURING; INTERFACES (COMPUTER); PROCESS ENGINEERING;

COMPUTER AIDED PRODUCTION PROCESS (CAPP); FEATURE BASED DESIGN (FBD); FIXTURE DESIGN; SET UP PLANNING;

AUTOMOBILE MANUFACTURE;

EID: 0030648022     PISSN: 01433369     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (56)

1. Abdou, G. and Cheng, R. (1993) 'TVCAPP, tolerance verification in CAPP', International Journal of Production Research, Vol. 31, No. 2, pp. 393-411.
2. Alting, L. and Zhang, H. (1989) 'CAPP: the state of art survey', International Journal of Production Research, Vol. 27, No. 4, pp. 553-585.
3. Altintas, Y. (1988) 'Present state of manufacturing automation', Computer Integrated Manufacturing, Turksen, I.B. (ed.) (NATO ASI Series F-Springer Verlag), pp. 415-425.
4. Arikan, M.A.S. and Totuk, O.H. (1992) 'Design by using machining operations', Annals of the CIRP, Vol. 41, No. 1, pp. 185-188.
5. Bedrin, C. and Roumesy, B. (1980) Methodes-Bases Tecniques de L'anayse de Fabrication, (Institut National des Sciences Appliquess de Lyon, CMC, Insa).
6. Benhabib, B., Chan, K.C. and Dai, M.Q, (1991) 'A modular programmable fixturing system', Journal of Engineering for Industry, Transactions of the ASME, Vol. 113, pp. 93-100.
7. Boerma, J.R. and Kals, H.J.J. (1988) 'FIXES, a system for automated selection of set-ups and design of fixtures', Annals of the CIRP, Vol. 37, Vol. 1, pp. 443-446.
8. Branger, G. (1985) Guide du Bureau de Methodes (Desforges, Paris).
9. Chang, T.C. and Anderson, D.C. (1992) 'Quick turnaround cell - an integration of feature based design and process planning', Institute of Industrial Engineering, 1992 First Industrial Engineering Research Conference Proceedings, pp. 83-85.
10. Chang, T.C. and Wysk, R. (1985) An Introduction to Automated Process Planning Systems, (Prentice Hall, NJ).
11. Cho, H., Derebail, A., Hale, T. and Wysk, R.A. (1994) 'A formal approach to integrating computer aided process planning and shopfloor control', Journal of Engineering for Industry, Vol. 116, No. 1, pp. 108-116.
12. Dong, X. Devries, W.R. and Wozny, M.J. (1991) 'Feature based reasoning in fixture design', Annals of the CIRP, Vol. 40, No. 1, pp. 111-114.
13. Duan, W., Zhou, J. and Lai, K. (1993) 'FSMT: a feature solid-modelling tool for feature-based design and manufacture,' Computer-Aided Design, Vol. 25, No. 1, pp. 29-37.
14. Eversheim, W. (1983) 'Automated generation of process plans for prismatic parts', Annals of the CIRP, Vol. 32, No. 1, pp. 361-364.
15. Fields, M.C. and Anderson, D.C. (1994) 'Fast feature extraction for machining applications', Computer-Aided Design, Vol. 26, No. 1, pp. 803-813.
16. Flynn, M.J. and Ahmad, M.M. (1993) 'A knowledge based approach to design for manufacture using features', Concurrent Engineering, Parsaei, H.R. and Sullivan, W.G. (eds) (Chapman & Hall), pp. 184-206.
17. Furth, I.B. (1988) 'Automated process planning', Computer Integrated Manufacturing, Turksen, I.B. (ed) (NATO ASI Series F-Springer Verlag), pp. 37-64.
18. Gadh, R. and Prinz, F.B. (1995) 'A computationally efficient approach to feature abstraction in design-manufacturing integration', Journal of Engineering for Industry, Vol. 117, pp. 16-27.
19. Giusti, F., Suntachi, M. and Dini, G. (1989) 'KAPLAN: a knowledge based approach to process planning of rotational parts', Annals of the CIRP, Vol. 38, No. 1, pp. 481-484.
20. Ham, I. and Lu, S.C.Y. (1988) 'Computer aided process planning: the present and the future', Annals of the CIRP, Vol. 37, No. 2, pp. 591-600.
21. Hanada, T. and Hoshi, T. (1992) 'Block-like component CAD/CAM system for fully automated CAM processing', Annals of the CIRP, Vol. 41, No. 1, pp. 551-556.
22. Hanada, T., Bandyopadhyay, B.P., and Hoshi, T. (1995) 'Implementation of low-volume FMS for prismatic components', Journal of Manufacturing Systems, Vol. 14, No. 2, pp. 91-108.
23. Hargrove, S.K. and Kusiak, A. (1994) 'Computer aided fixture design: a review', International Journal of Production Research, Vol. 32, No. 4, pp. 733-753.
24. Irani, S.A., Koo, H.Y. and Raman, S. (1995) 'Feature based operation sequence and generation in CAPp', International Journal of Production Research, Vol. 33, No. 1, pp. 17-39.
25. I-DEAS (1991) Solid Modelling User's Guide (SDRC).
26. Jones, R., Mitchell, S. and Newman, S. (1993) 'Feature-based system for the design and manufacture of sculptured products', International Journal of Production Research, Vol. 31, No. 6, pp. 1441-1452.
27. Kang, T.S. (1992) 'Feature reasoning for automated process planning systems', Institute of Industrial Engineering, 1992 First Industrial Engineering Research Conference Proceedings, pp. 179-182.
28. Kanumury, M. and Chang, T.C. (1993) 'Process planning in an automated manufacturing environment', Journal of Manufacturing Systems, Vol. 10, No. 1, pp. 67-78.
29. Keith, C. (1994) 'Using a design of features CAD system for process capability modelling', Computer Integrated Manufacturing Systems, Vol. 7, No. 1, pp. 39-49.
30. Korde, U.P., Bora, B.C., Stelson, K.A. and Riley, D.R. (1992) 'CAPP for turned parts using fundamental and heuristic principles', Journal of Engineering for Industry, Vol. 114, pp. 31-40.
31. Kulkarni, V.S. and Pande, S.S. (1995) 'A system for automatic extraction of 3D part features using syntatic pattern regonition techniques', International Journal of Production Research, Vol. 33, No. 6, pp. 1569-1586.
32. Kyo, I.L., Jin, W.L. and Jason, L. (1989) 'Pattern recognition and process planning workpieces by knowledge based approach', Annals of the CIRP, Vol. 38, No. 1, pp. 485-488.
33. Lauwers, B. and Kruth, J.P. (1994) 'Computer aided process planning for EDM operations', Journal of Manufacturing Systems, Vol. 13, No. 5, pp. 313-322.
34. Li, R.K., Lin, C.Y. and Wu, H.H. (1995) 'Feature modification framework for feature based design systems', International Journal of Production Research, Vol. 33, No. 2, pp. 549-563.
35. Martino, T., Facidieno, B., Giannini, F., Hassinger, S. and Ovtcharova, J. (1994) 'Feature-based modelling by integrating design and recognition approaches', Computer-Aided Design, Vol. 26, No. 8, pp. 646-653.
36. Menassa, R.J. and Devries, W.R. (1989) 'Locating point synthesis in fixture design', Annals of the CIRP, Vol. 38, No. 1, pp. 165-169.
37. Michael, J.O. and Ahmad, M.N. (1993) 'Computer-based concurrent engineering', Concurrent Engineering, Parsaei, H.R. and Sullivan, W.O. (eds) (Chapman & Hall) pp. 184-206.
38. Molloy, E. and Browne, J. (1993) 'A knowledge-based approach to design for manufacture using features', Concurrent Engineering, Parsaei, H.R. and Sullivan, W.G. (eds) (Chapman & Hall) pp. 286-400.
39. Nee, A.Y.C. and Senthil, K.A. (1991) 'A framework for an object/rule based automated fixture design system', Annals of the CIRP, Vol. 40, No. 1, pp. 147-151.
40. Nee, A.Y.C., Senthil, K.A. and Prombanpong, S. (1992) 'A feature based classification scheme for fixtures', Annals of the CIRP, Vol. 41, No. 1, pp. 189-192.
41. Ngoi, B.K.A. and Leow, G.L. (1994) 'Modular fixture design, a designer's assistance', International Journal of Production Research, Vol. 32, No. 9, pp. 2083-2104.
42. Öztürk, F., Kaya, N. and Alankus, O.B. (1992) 'CIM and the production and control systems', IFAC Workshop on Automatic Control for Quality and Productivity Proceedings, Vol. 1, pp. 42-52.
43. Öztürk, F., Çavdar, K. and Alankus, O.B. (1994) 'A computer based approach to dimensioning and tolerancing', Proceedings of the 1994 Engineering Systems Design and Analysis Conference, ASME, Vol. 5, pp. 143-149.
44. Öztürk, F., Kaya, N. and Sevinç, S. (1995) 'Proses planlama sürecinde unsur kullanimi', YAEM'95, ODTÜ, Ankara.
45. Öztürk, F., Kaya, N., Sönmez, S. and Duran, E. (1996) 'Selecting and positioning of locating points in fixture design', 7th International ANSYS Conference, USA (in press).
46. Park, J.Y. and Khoshnevis, B. (1993) 'A real time computer aided process planning system for a support tool for economic product design', Journal of Manufacturing Systems, Vol. 12, No. 2, pp. 181-193.
47. Pering, D., Chen, Z. and Wu, J. (1993) 'Automatic consistency verification of mechanical CAD files, International Journal of Computer Integrated Manufacturing, Vol. 6, No. 4, pp. 265-277.
48. Pham, D.T. and Lazaro, A.S. (1990) 'Autofix - an expert CAD system for jigs and fixtures', International Journal of Machines and Tools Manufacturing, Vol. 30, No. 3, pp. 403-411.
49. Prombanpong, S., Lewis, R.L. and Bishop, A.B. (1992) 'A computer-aided fixture design system with process planning integration for prismatic parts manufactured on CNC machining centers', Computers in Engineering, ASME, Vol. 1, pp. 369-380.
50. Rong, L., Bor, T. and Hayn, S. (1991) 'A two-stage feature-based design system', International Journal of Production Research, Vol. 29, No. 1, pp. 133-154.
51. Sakurai, H. (1992) 'Automatic setup planning and fixture design for machining', Journal of Manufacturing Systems, Vol. 11, No. 1, pp. 30-37.
52. Salamons, O.W., Houten, F.J.A.M. and Kals, H.J.J. (1993) 'Review of research in feature-based design', Journal of Manufacturing Systems, Vol. 12, No. 2, pp. 113-132.
53. Senthil, K.A., Nee, A.Y.C. and Prombanpong, S. (1992) 'Expert fixture-design system for an automated manufacturing environment', Computer-Aided Design, Vol. 24, No. 2.
54. Tzang, K. and Bartholomew, O.N. (1993) 'Feature representation and classification for automatic process planning systems', Journal of Manufacturing Systems, Vol. 12, No. 2, pp. 133-145.
55. Wang, E. (1992) 'Using automatic feature recognition to interface CAD to CAPP', Computers in Engineering, ASME Proceedings, Vol. 1, pp. 215-230.
56. Zust, R., Taiber, J. and Schutschik, R. (1990) 'Knowledge based process planning system for prismatic workpieces in a CAD/CAM environment', Annals of the C/RP, Vol. 39, No. 1, pp. 493-196.