A microdebonding study of the high-temperature oxidation embrittlement of a cross-ply glass-ceramic/SiC composite

Composites Science and Technology

Volumn 56, Issue 12, 1996, Pages 1453-1459

  Kahraman, R ^a  

^a KING FAHD UNIVERSITY OF PETROLEUM AND MINERALS   (Saudi Arabia)

Author keywords

Calcium aluminosilicate; Ceramic matrix composites; High temperature properties; Interface; Oxidation; Silicon carbide fiber

Indexed keywords

CALCIUM COMPOUNDS; CERAMIC FIBERS; CRACKS; EMBRITTLEMENT; FRACTURE; HIGH TEMPERATURE PROPERTIES; INTERFACES (MATERIALS); OXIDATION; SCANNING ELECTRON MICROSCOPY; SILICON CARBIDE; STRAIN; SURFACE PHENOMENA;

ADHESIVELY BONDED TABS; CALCIUM ALUMINOSILICATE; CROSS PLY GLASS CERAMIC SILICON CARBIDE COMPOSITE; HIGH TEMPERATURE OXIDATION EMBRITTLEMENT; HIGH TEMPERATURE TENSILE BEHAVIOR; MICRODEBONDING ANALYSIS; NICALON FIBER;

CERAMIC MATRIX COMPOSITES;

COMPOSITES, CERAMIC-FIBRE-REINFORCED; COMPOSITES, NICALON-FIBRE-REINFORCED;

EID: 0030428837     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0266-3538(96)00104-2     Document Type: Article

References (27)

1. Prewo, K. M., Fiber reinforced ceramics - New opportunities for composite materials. Am. Ceram. Soc. Bull., 68 (1989) 395-400.
2. Buljan, S.-T., Pasto, A. E. & Kim, H. J., Ceramic whisker-particulate-composites: Properties, reliability and applications. Am. Ceram. Soc. Bull., 68 (1989) 387-394.
3. Grande, D. H., Mandell, J. F. & Hong, K. C. C., Fiber-matrix bond strength studies of glass, ceramic, and metal matrix composites. J. Mater. Sci., 23 (1988) 311-328.
4. Hull, D., An Introduction to Composite Materials. Cambridge University Press, Cambridge, 1981.
5. Dannemann, K. A., Damage development and failure of fiber-reinforced ceramic matrix composites. PhD thesis, Massachusetts Institute of Technology, 1989.
6. Kahraman, R. & Mandell, J. F., Influence of fiber-matrix bond strength on the performance of Nicalon/CAS-II composite. J. Comp. Mater., 30 (1996) 864-884.
7. Cooper, R. F. & Chyung, K., Structure and chemistry of fiber-matrix interfaces in silicon carbide fiber-reinforced glass-ceramic composites: An electron microscopy study. J. Mater. Sci., 22 (1987) 3148-3160.
8. Filipuzzi, L., Camus, G. & Naslain, R., Oxidation mechanisms and kinetics of 1D-SiC/C/SiC composite materials: I. An experimental approach. J. Am. Ceram. Soc., 77 (1994) 459-466.
9. Filipuzzi, L. & Naslain, R., Oxidation mechanisms and kinetics of 1D-SiC/C/SiC composite materials: II. Modeling. J. Am. Ceram. Soc., 77 (1994) 467-480.
10. Pharaoh, M. W., Daniel, A. M. & Lewis, M. H., Stability of interfaces in calcium aluminosilicate matrix/Nicalon SiC fiber composites. J. Mater. Sci., 12 (1993) 998-1001.
11. Prewo, K. M., Tension and flexural strength of silicon carbide fibre reinforced glass ceramics. J. Mater. Sci., 21 (1986) 3590-3600.
12. Stewart, R. L., Chyung, K., Taylor, M. P. & Cooper, R. F., Fracture of SiC fiber/glass-ceramic composites as a function of temperature. In Fracture Mechanics of Ceramics (Proc. 4th Int. Symp. on Composites, Impact, Statistics, and High-Temperature Phenomena), Vol. 7, ed. R. C. Bradt, A. G. Evans, D. P. H. Hasselman & F. F. Lange. Plenum Press, New York, 1986, pp. 33-51.
13. Grande, D. H., Testing and properties of high temperature glass-ceramic matrix composites. PhD thesis, Massachusetts Institute of Technology, 1987.
14. Schutz, J. B., Test methods and analysis for glass-ceramic matrix composites (ceramic matrix composites). PhD thesis, Massachusetts Institute of Technology, 1991.
15. ASTM D 3039-76, Annual Book of ASTM Standards, American Society for Testing and Materials, Philadelphia, PA, 1987, pp. 165-170.
16. Mecholsky, J. J., Evaluation of mechanical property testing methods for ceramic matrix composites. Am. Ceram. Soc. Bull., 65 (1986) 315-322.
17. Shercliff, H. R., Vekinis, G. & Beaumont, P. W. R., Direct observation of the fracture of CAS-glass/SiC composites. J. Mater. Sci., 29 (1994) 3643-3652.
18. Marshall, D. B. & Evans, A. G., Failure mechanisms in ceramic-fiber/ceramic-matrix composites. J. Am. Ceram. Soc., 68 (1985) 225-231.
19. Prewo, K. M., Brennan, J. J. & Layden, G. K., Fiber reinforced glasses and glass-ceramics for high performance applications. Am. Ceram. Soc. Bull., 65 (1986) 305-311.
20. Brennan, J. J., Interfacial characterization of glass and glass-ceramic matrix/Nicalon fiber composites. In Proc. Conf. on Tailoring Multiphase and Composite Ceramics, ed. R. E. Tressler, G. L. Messing, C. G. Pantano & R. E. Newnham. Plenum Press, New York, 1986, pp. 549-560.
21. Mandell, J. F., Grande, D. H., Tsaing, T. H. & McGarry, F. J., Modified microdebonding test for direct in situ fiber/matrix bond strength determination in fiber composites. In ASTM STP 893, American Society for Testing and Materials, Philadelphia, PA, 1986, pp. 87-108.
22. Mandell, J. F., Chen, J. H. & McGarry, F. J., A microdebonding test for in situ assessment of fiber/matrix bond strength in composite materials. Int. J. Adhes. Adhes., 1 (1980) 40-44.
23. Kahraman, R. & Mandell, J. F., High temperature transverse fracture toughness of ceramic matrix composites. Paper presented at The American Ceramic Society Annual Meeting, Minneapolis, MN, 1992.
24. Lara-Curzio, E. & Ferber, M. K., Methodology for the determination of the interfacial properties of brittle matrix composites. J. Mater. Sci., 29 (1994) 6152-6158.
25. Pysher, D. J., Goretta, K. C., Hodder, R. S. Jr & Tressler, R. E., Strengths of ceramic fibers at elevated temperatures. J. Am. Ceram. Soc., 72 (1989) 284-288.
26. Evans, A. G. & Zok, F. W., The physics and mechanisms of fiber-reinforced brittle matrix composites. J. Mater. Sci., 29 (1994) 3857-3896.
27. Huger, M., Fargeot, D. & Gault, C., Ultrasonic characterization of oxidation mechanisms in Nicalon/C/SiC composites. J. Am. Ceram. Soc., 77 (1994) 2554-2560.