Computational modeling of geometric and material nonlinearities with an application to impact damage in brittle materials

American Society of Mechanical Engineers, Applied Mechanics Division, AMD

Volumn 219, Issue , 1996, Pages 119-161

  Espinosa, Horacio D ^a   Emore, Gordon ^a   Zavattieri, Pablo ^a  

^a Purdue University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALGORITHMS; CERAMIC MATERIALS; CRACK INITIATION; DEFORMATION; FINITE ELEMENT METHOD; FRICTION; MATHEMATICAL MODELS; OPTIMIZATION; SIMULATION; STRAIN; STRAIN RATE; STRESSES;

IMPACT DAMAGE; MATERIAL NONLINEARITIES; MESH REFINEMENT; MESH REZONING;

BRITTLENESS;

EID: 0030421969     PISSN: 01608835     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Article

References (51)

1. Asaro, R.J., and Rice, J.R., 1977. 'Strain localization in ductile single crystals,' J. Mech. Phys. Solids, 25, 309.
2. Batra, R.C., and Hwang, J., 1993, 'An adaptive mesh refinement technique for two-dimensional shear band problems,' Comp. Mech., 12, 255.
3. Batra, R.C., and Ko, K.I., 1992, 'An adaptive mesh refinement technique for the analysis of shear bands in plane strain compression of a thermoviscoplastic solid,' Comp. Mech., 10, 369.
4. Bazant, Z.P., and Gambarova, P.G., 1984, 'Crack shear in concrete: crack band microplane model.' J. Struct. Engng. ASCE, 110(9), 2015.
5. Belytschko, T., 1983, 'An overview of semidiscretization and time integration procedures,' in Computational Methods for Transient Analysis, eds. T. Belytschko and T. Hughes, 301.
6. Benson, D.J., 1992, 'Computational methods in Lagrangian and Eulerian hydrocodes,' Comput. Methods Appl. Mech. Eng., 99, 235.
7. Clifton, R.J. and Klopp, R.W., 1985, 'Pressure-Shear Plate Impact Testing', Metals Handbook: Mechanical Testing 8. 9th Edition, p. 230.
8. Donea, J., 1983, 'Arbitrary Lagrangian-Eulerian finite element methods,' in Computational Methods for Transient Analysis, eds. T. Belytschko and T. Hughes, 473.
9. Duffy, J., 1979, 'The dynamic plastic behavior of structural materials: A review,' prepared for the Engineering Foundation.
10. Dvorkin, E.N., and Petocz, E.G., 1992, 'On the modelling of 2D metal forming processes using flow formulation and the pseudo-concentration technique', in Proc. 3rd Int. Conf. Comput. Plasticity, eds. D.R.J. Owen, E. Oñate, and E. Hinton, 1037.
11. Espinosa, H.D., 1989, 'Finite element analysis of stress induced damage in ceramics,' MSc. Thesis, Brown University, Providence, RI.
12. Espinosa, H.D. and Brar, N.S., 1995, 'Dynamic failure mechanisms of ceramic bars: experiments and numerical simulations,' J. Mech. Phys. Solids, 43(10), 1615.
13. Espinosa, H.D., Raiser, G., Clifton, R.J., and Ortiz, M., 1992, 'Experimental observations and numerical modeling of inelasticity in dynamically loaded ceramics,' J. of Hard Materials, Vol 3, 3-4, pp. 285-313.
14. Espinosa, H.D., Emore, G., Xu, Y. 1995, 'High Strain rate behavior of composites with continuous fibers', ASME Special Technical Publication, High Strain Rate Effects on Polymer, Metal and Ceramic Matrix Composites and Other Advanced Materials, eds. by Y.D.S. Rajapakse and J.R. Vinson, San Francisco, California, 6.
15. Espinosa, H.D., and Lu, H.C., 1995. Unpublished research.
16. Flanagan, D.P., and Belytschko, T., 1984, 'Eigenvalues and stable time steps for the uniform strain hexahedron and quadrilateral,' J. Appl. Mech., 51, 35.
17. Freund, L.B., 1990, Dynamic Fracture Mechanics, Cambridge University Press, Cambridge.
18. Havner, K.S., 1973, 'On the mechanics of crystalline solids,' J. Mech. Phys. Solids, 38, 87.
19. Hill, R., and Rice, J.R., 1972, 'Constitutive analysis of elastic-plastic crystals at arbitrary strain,' J. Mech. Phys. Solids, 20, 401.
20. Ju, J.W., and Lee, X., 1991, 'On three dimensional self-consistent micromechanical damage models for brittle solids,' J. Engng Mech. ASCE, 117(7).
21. Komanduri, R., 1993, 'Machining and grinding: A historical review of the classical papers,' Appl Mech Rev, 46(3), 80.
22. Lee, E.H., 1969, 'Elastic plastic deformations at finite strains', ASME J. Appl. Mech., 36, 1-6.
23. Liu, W.K., Chang, H., Chen, J.S., and Belytschko, T., 1988, 'Arbitrary Lagrangian-Eulerian Petrov-Galerkin finite elements for nonlinear continua,' Comput. Methods Appl. Mech. Eng., 68, 259.
24. Mandel, J., 1972, Plasticité classique et viscoplasticité, Course given at Int. Center for Mech. Sci., Udine, Springer, Berlin.
25. Marusich, T.D., and Ortiz, M., 1995, 'Modelling and simulation of high-speed machining,' Int J. Num. Meth. Eng., 38, 3675.
26. Mohan, R., 1991, 'On crack tip fields in ductile single crystals and bicrystals,' Ph.D. Thesis, Brown University, Providence, RI.
27. Needleman, A., 1988, 'Material rate dependence and mesh sensitivity in localization problems,' Comput. Meth. Engng., 67, 69.
28. Nicholas, T., and Rajendran, A.M., 1990, 'Material characterization at high strain rates,' in High velocity impact dynamics, ed. by J.A. Zukas, John Wiley and Sons, Inc.
29. Ortiz, M., and Quigley, J.J., 1991, 'Adaptive mesh refinement in strain localization problems,' Comp. Meth. Appl. Mech. Eng., 90, 781.
30. Oxley, P.L.B., 1989, Mechanics of Machining, Ellis Horwood, Chichester.
31. Özisik, M.N., 1977, Basic Heat Transfer, McGraw-Hill, New York.
32. Rajendran, A.M., 1992, 'High strain rate behavior of metals, ceramics, and concrete,' Air Force Report WL-TR-92-4006, Wright-Patterson Air Force Base, OH.
33. Rice, J.R., 1971, 'Inelastic constitutive relations for solids: an internal-variable theory and its application to metal plasticity,' J. Mech. Phys. Solids, 19, 433.
34. Sandler, I.S., and Wright, J.P., 1984, 'Strain-softening,' Theoretical Foundations for Large Scale Computations of Nonlinear Materials Behavior, (ed. Nemat Nasser et al., 285.
35. Seaman, L., and Dein, J.L., 1983, 'Representing shear band damage at high strain rates,' Proc. IUTAM Symp. on Nonlinear Deformation Waves,' Tallin, Estonia, Springer-Verlag, Berlin.
36. Shih, A.J., and Yang, H.T., 1993, 'Experimental and finite element predictions of residual stresses due to orthogonal metal cutting,' Int J. Num. Meth. Eng., 36, 1487.
37. Stillman, D.W., Lum, L., Hallquist, J.O., and Benson, D.J., 1993, 'An arbitrary Lagrangian-Eulerian capability for LS-DYNA3D,' AMD, 171, 67.
38. Taylor, L.M., and Flanagan, D.P., 1987, 'PRONTO 2D: a two dimensional transient solid dynamics program', Sandia Report SAND86.
39. Teodosiu, C., 1970, 'A dynamic theory of dislocations and its applications to the theory of elastic-plastic continuum,' Fundamental Aspects of Dislocation Theory, 2, National Bureau of Standards (U.S.) Special Publication, 837.
40. Tvergaard, V., 1990, 'Effect of fibre debonding in a whisker-reinforced metal,' Materials Science and Engineering, A125, 203.
41. Weber, G., and Anand, L., 1990, 'Finite deformation constitutive equations and a time integration procedure for isotropic, hyperelastic-viscoplastic solids,' Comp. Meth. Appl. Mech. Eng., 79, 173.
42. Wise, J.L., and Grady, J.R., 1994, 'Dynamic, multiaxial impact response of confined and unconfined ceramic rods,' in Proc. High Pressure Science and Technology, APS Meeting, eds. S.C. Schmidt, J.W. Shaner, G.A. Samara, and M. Ross, 777.
43. Yang, H.T., Heinstein, M., and Shih, J.M., 1989, 'Adaptive 2D finite element simulation of metal forming processes,' Int. J. Num. Meth. Eng., 28, 1409.
44. Zavattieri, P.D., Buscaglia, G.C., and Dari, E.A., 1995, 'Finite element mesh optimization in three dimensions,' Submitted to Latin American Applied Research.
45. Zavattieri, P.D., Dari, E. A., and Buscaglia, G.C., 1995, 'Optimization strategies in unstructured mesh generation,' Submitted to Int. J. Numer. Meth. in Eng..
46. Zavattieri, P.D., 1995, 'Finite element mesh optimization in three dimensions,' MSc Thesis in Nuclear Engineering, Instituto Balseiro, Argentina.
47. Zhou, M., Ravichandran, G., and Rosakis, A.J., 1996 'Dynamically propagating shear bands in impact-loaded prenotched plates- II. Numerical simulations,' J. Mech. Phys. Solids, 44(6), 1007.
48. Zhu, J.Z., Himton, E. and Zienkiewicz, O.C., 1991, 'Adaptive finite element analysis with quadrilaterals. Computers & Structures, 40(5), 1097.
49. Zienkiewicz, O.C., and Taylor, R.L., 1993a, The Finite Element Method, 4th Ed.,1.
50. Zienkiewicz, O.C., and Taylor, R.L., 1993b, The Finite Element Method, 4th Ed., 2.
51. Zukas, J.A. , 1990, High velocity impact dynamics John Wiley and Sons, Inc., New York.