Application of reynolds stress modeling to engine flow calculations

Journal of Fluids Engineering, Transactions of the ASME

Volumn 118, Issue 4, 1996, Pages 710-721

  Lebrere L ^a   Buffat, M ^b   Le Penven, L ^c   Dillies, B ^a  

^a CENTRO RICERCHE FIAT   (Italy)

^b UNIVERSITÉ LYON 1   (France)

^c LABORATOIRE DE MÉCANIQUE DES FLUIDES ET D ACOUSTIQUE   (France)

Author keywords

[No Author keywords available]

Indexed keywords

CALCULATIONS; FORECASTING; IMPROVEMENT; INTERNAL COMBUSTION ENGINES; NUMERICAL METHODS; REYNOLDS NUMBER; SIMULATION;

ENGINE FLOW CALCULATIONS; REYNOLDS STRESS MODELING;

TURBULENT FLOW;

EID: 0030414330     PISSN: 00982202     EISSN: 1528901X     Source Type: Journal    
DOI: 10.1115/1.2835500     Document Type: Article

References (35)

1. Amsden, A. A., O’Rourke, P. J., and Butler, T. D., 1989, “KIVA-II: A Computer Program for Chemically Reactive Flows with Spray,” LA-11560-MS, Los Alamos National Laboratory, Los Alamos, NM.
2. Brun, G., 1988, “Developpement et application d’une methode d’elements finis pour le calcul des ecoulements turbulents fortement chauffes,” These de doctorat, Ecole Centrale de Lyon.
3. Cambon, C., Mao, Y., and Jeandel, D., 1992a, “On the Application of Time Dependent Scaling to Modelling of Turbulence Undergoing Compression,” Eur. J. Mech. B/Fluids, No. 6, pp. 683-703.
4. Cambon, C., Jacquin, L., and Lubrano, J. L., 1992b, “Toward a New Reynolds Stress Model for Rotating Turbulent Flows,” Physics of Fluids, Vol. 4, pp. 812-824.
5. Comte-Bellot, G., 1965, “Ecoulement turbulent entre deux parois paralleies,” Publications Scientifiques et Techniques du Ministere de VAir, No. 419.
6. Deschamps, C. J., and Watkins, A. P., 1994, “Modeling of Turbulent Flow through Port/Valve Assemblies with an Algebraic Reynolds Stress Model,” COMODIA 94, pp. 547-552.
7. Debaty, P., 1994, “Performances d’un modele du second ordre dans un code elements finis,” These de doctoral, Ecole Centrale de Lyon.
8. ElTahry, S. H., 1985a, “A Comparison of Three Turbulence Models in Engine-Like Geometries,” COMODIA, Tokyo.
9. El Tahry, S. H., 1985b, “Application of a Reynolds Stress Model to Engine-Like Flow Calculations,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 107, pp. 444-450.
10. Farhanieh, B., Davidson, L., and Sunden, B., “Employment of Second-Moment Closure for Calculation of Turbulent Recirculating Flows in Complex Geometries with Collocated Variable Arrangement,” International Journal for Numerical Methods in Fluids, Vol. 16, pp. 525-544.
11. Fu, S., Huang, P. G., Launder, B. E., and Leschziner, M. A., 1988, “A comparison of algebraic and differential second-moment closures for axisymmetric turbulent shear flows with and without swirl,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 110, pp. 216-221.
12. Gosman, A. D., and Watkins, A. P., 1977, “A Computer Prediction Method for Turbulent Flow and Heat Transfer in Piston/Cylinder Assemblies,” 1st Symposium on Turbulent Shear Flow, Penn. State Univ., Apr. 18-20 1977.
13. Gosman, A. D., Tsui, Y. Y., and Watkins, A. P., 1984, “Calculations of Three Dimensional Air Motion in Model Engine,” SAE paper 840229.
14. Huang, P. G., and Leschziner, M. A., 1985, “Stabilization of Recirculating Flow Computations Performed with Second-Order Closures and Third-Order Discretization,” Proc. 5th Symp. on Turbulent Shear Flows, Cornell University, Paper 20.7.
15. Jakirlic, S., and Hanjalic, K., 1994, “On the Performance of the Second-Moment High-and Low-Re-Number Closures in Reattaching Flows,” Proc. Int. Symp. on Turbulence, Heat and Mass Transfer, Lisbon, Aug. 1994.
16. Jones, W. P., Pascau, A., 1989, “Calculation of Confined Swirling Flows With a Second Moment Closure,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 3, pp. 248-255.
17. Kim, J., Kline, S. J., and Johnston, J. P., 1980, “Investigation of a Reattaching Turbulent Shear Layer: Flow Over a Backward-Facing Step,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 102, pp. 302-308.
18. Kline, S. J., Cantwell, B. J., and Lilley, G. M., 1981, Proceedings of the 1980-81 AFOSR-HTTM Stanford Conference on Complex Turbulent Flows, Stanford University Press, Stanford, CA.
19. Launder, B. E., Reece, G. J., and Rodi, W., 1975, “Progress in the Development of a Reynolds Stress Turbulence Closure,” Journal of Fluid Mechanics, Vol. 68, pp. 537-566.
20. Launder, B. E., 1989, “Second Moment Closure and its Use in Modelling Turbulent Industrial Flows,” International Journal for Numerical Methods In Fluids, Vol. 9, pp. 963-985.
21. Lebrere, L., 1995, “Modelisation de la turbulence au second ordre pour la simulation numerique d’ecoulements dans les moteurs a pistons,” These de Doctorat, Ecole Centrale de Lyon.
22. Le Penven, L., and Serre, G., 1993, “Homogeneous Turbulence Submitted to Compression, Experimental Study and Modelling,” 9th Symposium on Turbulent Shear Flow, Kyoto (Japan), August 16-18, 1993.
23. Lien, F. S., and Leschziner, M. A., 1993, “Second-Moment Modelling of Recirculating Flow with a Non-Orthogonal Collocated Finite-Volume Algorithm,” Turbulent Shear Flows 8, Springer-Verlag, Berlin, pp. 431.
24. Lien, F. S., and Leschziner, M. A., 1994, “Assessment of Turbulence-Transport Models Including Non-Linear RNG Eddy-Viscosity Formulation and Second-Moment Closure for Flow Over a Backward Facing Step,” Computers Fluids, Vol. 23, pp. 983-1004.
25. Mao, Y., Buffat, M., and Jeandel, D., 1994, “Simulation of the Turbulent Flow Inside The Combustion Chamber of a Reciprocating Engine With a Finite Element Method,” ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 116, pp. 363-369.
26. Michard, M., Grosjean, N., Safsaf, D., and Lengyel, I., 1993: “Mesure d’echelles de turbulence dans un moteur alternatif,” Rapport Final 1992, ME-TRAFLU.
27. Naitoh, K., Fujii, H., Takagi, Y., and Kuwahara, K., 1990, “Numerical Simulation of the Detailed Flow in Engines Ports and Cylinders,” SAE paper No. 900256.
28. Oberlack, M., and Peters, N., 1992, “Closure of the Two-Point Correlation Equation as a Basis of Reynolds Stress Models,” Applied Scientific Research, Vol. 51, pp. 533-538.
29. Reynolds, W. C., 1980, “Modelling of Fluid Motions in Engines—An Introductory Overview,” Symposium on Combustion Modeling in Reciprocating Engines, eds., Plenum Press, 1980, pp. 41-66.
30. Rodi, W., 1976, “A New Algebraic Stress Relation for Calculating the Reynolds Stresses,” Z. Ang. Math. und. Mech., Vol. 56, p. 219.
31. Speziale, C. G., Sarkar, S., and Gatski, T. B., 1991, “Modelling the Pressure-Strain Correlation of Turbulence: An Invariant Dynamical Systems Approach,” Journal of Fluid Mechanics, Vol. 227, pp. 245-272.
32. Thangam, S., 1991, “Analysis of Two-Equation Turbulence Models for Recirculating Flows,” ICASE Report No. 91-61.
33. Watkins, A. P., Kanellakopoulos, P., and Lea, C. J., 1990, “An Assessment of Discretisation Schemes and Turbulence Models for In-Cylinder Flows,” COMODIA 90, pp. 499-504.
34. Watkins, A. P., and Lea, C. J., 1991, “Development of Advanced Turbulence Models for the Calculation of Flows in Internal Combustion Engine Cylinders,” IMechE 1991, pp. 7-20.
35. Wu, C. T., Ferziger, J. H., and Chapman, D. R., 1985, report TF-21 NASA, Stanford.