Modeling of primary and secondary dendrites in a Cu-6 wt pet Sn alloy

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 27, Issue 12, 1996, Pages 4085-4093

  Tiedje, N ^a,b   Hansen, P N ^a,c,d   Pedersen, A S ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^b Disa Holding AS   (Denmark)

^c Foundry Technology

^d Georg Fischer DISA Technologies   (Denmark)

Author keywords

[No Author keywords available]

Indexed keywords

DIFFUSION IN LIQUIDS; GRAIN GROWTH; MATHEMATICAL MODELS; METALLOGRAPHIC MICROSTRUCTURE; PARTICLE SIZE ANALYSIS; SCANNING ELECTRON MICROSCOPY; SOLIDIFICATION;

DENDRITE ARM SPACING (DAS); GAS ATOMIZATION; GROWTH VELOCITY;

COPPER ALLOYS;

EID: 0030412799     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02595657     Document Type: Article

References (44)

1. T.W. Clyne, R.A. Ricks, and P.J. Goodhew: Int. J. Rapid Solidification, 1984, vol. 1, pp. 59-80.
2. T.W. Clyne, R.A. Ricks, and P.J. Goodhew: Int. J. Rapid Solidification, 1985, vol. 1, pp. 85-101.
3. L. Kallien: Herstellung Schnell Erstarrter und Hochunterkühlter Metallpulver, VDI Verlag, Düsseldorf, 1989.
4. G.C. Hartmann: Die Erstarrung von Metallen im Sprühgiessprozess am Beispiel der Zinnbronze CuSn6, VDI Verlag, Düsseldorf, 1990.
5. A.F. Norman: Rapid Solidification of Al-Hf and Al-Li-Hf Alloys, University of Surrey, Surrey, 1991.
6. D. Stock: Die Zweistufige Gas-Wasserzerstäubung Metallischer Schmelzen, Insbesondere .von CuSn6, VDI Verlag, Düsseldorf, 1990.
7. P. Ottosen: Numerical Simulation of Spray Forming, Technical University of Denmark, Copenhagen, 1993.
8. P.S. Grant, B. Cantor, and L. Katgerman: Acta Metall. Mater., 1993, vol. 41, pp. 3097-3108.
9. P.S. Grant, B. Cantor, and L. Katgerman: Acta Metall. Mater., 1993, vol. 41, pp. 3109-18.
10. J.-O. Choi: Einfluss der Erstamingsgeschwindigkeit auf Gefüge und Eigenschaften Technischer Kupferlegierungen, Max-Planck-Institut für Metallforschung, Stuttgart, 1987.
11. W.A. Kaysser, K. Rzesnitzek, R. Laag, J. Wachter, and G. Petzow: The Future of Powder Metallurgy, Int. Powder Metallurgy Conf., Düsseldorf, July 1986. W.A. Kaysser and W.J. Huppmann, eds., Schmidt GMBH, Freiburg, Germany, 1986, pp. 84-88.
12. Y. Kondo, T. Suzuki, Y. Miyata, and T. Umemura: Imono, 1986, vol. 58, pp. 35-40.
13. K.W. Lee and S.H. Park: J. Kor. Inst. Met., 1980, vol. 18, pp. 114-21.
14. T. Suzuki, T. Umeda, Y. Kimura, and M. Sugiyama: Nipp. Kinz. Gakk., 1980, vol. 18, pp. 761-66.
15. M. Sugiyama and T. Umeda: J. Fac. Eng. Univ. Tokyo, 1971, vol. 9, pp. 62-63.
16. K. Rzesnitzek, W.A. Kaysser, and G. Petzow: VIII'th GermanYugoslav Meeting on Materials Sciences and Development, W.A. Kaysser and W.J. Huppmann, eds., 1986, Schmidt, Freiburg, Germany, pp. 371-78.
17. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 1989.
18. J. Lipton, W. Kurz, and R. Trivedi: Acta Metall., 1987, vol. 35, pp. 957-64.
19. R. Trivedi, J. Lipton, and W. Kurz: Acta Metall., 1987, vol. 35, pp. 965-70.
20. J.D. Hunt: Acta Metall. Mater., 1991, vol. 39, pp. 2117-33.
21. J.D. Hunt: Acta Metall. Mater., 1990, vol. 38, pp. 411-18.
22. S.-Z. Lu and J.D. Hunt: J. Cryst. Growth, 1992, vol. 123, pp. 17-34.
23. J. Lipton, M.E. Glicksman, and W. Kurz: Mater. Sei. Eng., 1984, vol. 65, pp. 57-63.
24. B. Giovanola and W. Kurz: Metall. Trans. A, 1990, vol. 21A, pp. 260-63.
25. W. Kurz, B. Giovanola, and R. Trivedi: Acta Metall., 1986, vol. 34, pp. 823-30.
26. N. Tiedje: Formation of Microstructures in Gas-Atomised Cu-6 wtpct Sn and 3J6L Powders, Grafisk Service, Riso, 1994.
27. W.E. Ranz and W.R. Marshall, jr.: Chem. Eng. Prag., 1952, vol. 48, pp. 173-80.
28. M.J. Aziz and T. Kaplan: Acta Metall., 1988, vol. 36, pp. 2335-47.
29. S.H. Han and R. Trivedi: Acta Metall. Mater., 1994, vol. 42, pp. 25-41.
30. B.P. Bewlay and B. Cantor: Metall. Trans. B, 1990, vol. 21B, pp. 899-912.
31. A. Mortensen: Mater. Sei. Eng., 1989, vol. 20A, pp. 247-53.
32. A. Mortensen: Metall. Trans. A, 1991, vol. 22A, pp. 569-74.
33. H. Jones: Mater. Sei. Eng., 1984, vol. 65, pp. 145-56.
34. V.G. Rivlin and G.V. Raynor: Int. Met. Rev., 1980, pp. 21-38.
35. P. Esslinger: Z. Metallkd. 1966, vol. 57, pp. 12-19.
36. J.S. Langer and H. Müller-Kiumbhaar: Acta Metall., 1978, vol. 26, pp. 1681-87.
37. J.S. Langer and H. Müller-Krumbhaar: Acta Metall., 1978, vol. 26, pp. 1689-95.
38. J.S. Langer and H. Müller-Krumbhaar: Acta Metall, 1978, vol. 26, pp. 1697-1708.
39. R. Trivedi: Metall. Trans. A, 1984, vol. ISA, pp. 977-82.
40. D.H. Kirkwood: Mater. Sei. Eng., 1985, vol. 73, pp. L1-L4.
41. H. Matyja, B.C. Giessen, and N.J. Grant: J. Inst. Met., 1968, vol. 96, pp. 30-32.
42. N.J.E. Adkins, N. Saunders, and P. Tsakiropoulos: Mater. Sei. Eng., 1988, vol. 98, pp. 217-19.
43. N.J.E. Adkins, A.F. Norman, and P. Tsakiropoulos: Int. J. Rapid Solidification, 1991, vol. 6, pp. 77-86.
44. M. Canard, M. Gremaud, M. Zimmermann, and W. Kurz: Acta Metall. Mater., 1992, vol. 40, pp. 983-96.