Effects of the metal workpiece properties on the residual stresses in silicon nitride-metal brazed joints

Journal of Materials Research

Volumn 11, Issue 12, 1996, Pages 3090-3098

  Yvon, Pascal J ^a,b   Marty, Benoit ^a,c   Peteves, Stathis D ^a  

^a JOINT RESEARCH CENTRE   (Italy)

^b CEA SACLAY   (France)

^c ARTS ET MÉTIERS PARISTECH   (France)

Author keywords

[No Author keywords available]

Indexed keywords

BRAZING; CALCULATIONS; CERAMIC MATERIALS; JOINTS (STRUCTURAL COMPONENTS); MECHANICAL VARIABLES MEASUREMENT; RESIDUAL STRESSES; THERMAL EXPANSION; THERMODYNAMIC PROPERTIES; X RAY DIFFRACTION;

RESIDUAL STRAINS; RESIDUAL STRESS MEASUREMENTS; THERMAL EXPANSION COEFFICIENTS; THERMAL MISMATCH;

SILICON NITRIDE;

EID: 0030409964     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/JMR.1996.0393     Document Type: Article

References (47)

1. M. G. Nicholas, Joining of Ceramics (Chapman and Hall, London, 1990).
2. A. P. Tomsia, Colloque C7, Suppl. J. de Physique III 3, 1317 (1993).
3. J. J. Stephens, S. N. Burchett, and F. M. Hosking, The Metal Science of Joining, Proc. TMS Fall Meeting, Cincinnati, OH, October, 1991, edited by M. J. Cieslak, J. H. Perepezko, S. Kang, and M. E. Glicksman (TMS, Warrendale, PA, 1992), p. 285.
4. J. J. Stephens, S. N. Burchett, and W. B. Jones, Advances in Electronic Packaging 1992, Proc. 1992 Joint ASME/JSME Conference on Electronic Packaging, Vol. 1, Milpitas, CA, April, 1992, edited by W. T. Chen (ASME, New York, 1992), p. 363.
5. Y. Zhou, K. Ikeuchi, T. H. North, and Z. Wang, Metall. Trans. A 22A, 2822 (1991).
6. O. T. Iancu, D. Munz, B. Eigenmann, B. Scholtes, and E. Macherauch, J. Am. Ceram. Soc. 73, 1144 (1990).
7. C. H. Hsueh and A. G. Evans, J. Am. Ceram. Soc. 68, 241 (1985).
8. H. P. Kirchner, J. C. Conway, Jr., and A. E. Seagall, J. Am. Ceram. Soc. 70, 104 (1987).
9. H. Kobayashi, Y. Arai, H. Nakamura, and T. Sato, Mater. Sci. Eng. A143, 91 (1991).
10. A. Levy, A. Tobin, and G. Busch, Metal-Ceramic Joining, Proc. TMS Fall Meeting, Detroit, MI, October, 1990, edited by P. Kumar and V. A. Greenhut (TMS, Warrendale, PA, 1991), p. 133.
11. R. L. Williamson, B. H. Rabin, and J. T. Drake, J. Appl. Phys. 74, 1310 (1993).
12. A. G. Foley and C. G. Winters, Brit. Ceram. Proc. 48, 107 (1991).
13. T. Yada and H. Koguchi, JSME Int. 34, 163 (1991).
14. P. O. Charreyron, D. O. Patten, Jr., and B. J. Miller, Ceram. Eng. Sci. Proc. 10, 1801 (1989).
15. J. Ahmad and B. S. Majumdar, Fracture Mechanics, 22nd Symposium, Vol. 1, ASTM STP 1131, edited by H. A. Ernst, A. Saxena, and D. L. McDowell (ASTM, Philadelphia, 1992), p. 590.
16. H. A. Haaggblad, Designing Ceramic Interfaces II: Understanding and tailoring interfaces for coating, composite and joining applications, Proc. 2nd European Colloquium, Petten, The Netherlands, November, 1991, edited by S. D. Peteves (CEC, DGXIII, Luxembourg, 1993), p. 105.
17. M. Kurita and K. Yoneda, Computer Methods and Experimental Measurements for Surface Treatment Effects, Proc. 1st Int. Conf. on Computer Methods and Experimental Measurements for Surface Treatment Effects 93, edited by M. H. Aliabadi and C. A. Brebbi, Comp. Mech. Publ. (Southampton, UK, 1993), p. 29.
18. H. Murakawa and Y. Ueda, Trans. Jpn. Welding Res. Inst. 20, 1 (1991).
19. D. Munz and Y. Y. Yang, J. Europ. Ceram. Soc. 13, 453 (1994).
20. D. A. Parker, Designing Interfaces for Technological Applications: Ceramic-Ceramic, Ceramic-Metal Joining, Proc. 1st European Colloquium, Petten, The Netherlands, April, 1988, edited by S. D. Peteves (Eisevier Appl. Sci., London, UK, 1989), p. 3.
21. H. Kobayashi, Y. Arai, K. Oguiso, K. Sasaki, T. Sato, and N. Okabe, Proc. 3rd Int. Conf. on Residual Stresses, edited by H. Fujiwara, T. Abe, and K. Tanaka (Elsevier Appl. Science, London, UK, 1992), p. 893.
22. S-I. Tanaka, Proc. 3rd Int. Conf. on Residual Stresses, edited by H. Fujiwara, T. Abe, and K. Tanaka (Elsevier Appl. Science, London, UK, 1992), p. 887.
23. B. Eigenmann, B. Scholtes, and E. Macherauch, Proc. 1st European Ceramic Society Conference, edited by G. de With, R. A. Terpsta, and R. Metselaar (Elsevier Appl. Science, London, UK, 1989), p. 3.554.
24. L. Pintschovius, N. Pyka, R. Kußmaul, D. Munz, B. Eigenmann, and B. Scholtes, Mater. Sci. Eng. A177, 55 (1994).
25. K. Suganuma, T. Okamoto, M. Koizumi, and K. Kamachi, J. Mater. Sci. 22, 3561 (1987).
26. B. Eigenmann, B. Scholtes, and E. Macherauch, Mater. Sci. Eng. A118, 1 (1989).
27. M. L. Santella, Adv. Ceram. Mater. 3, 457 (1988).
28. S. C. Kunz and R. E. Loehman, Adv. Ceram. Mater. 2, 69 (1987).
29. C-C. Chiu, Mater. Sci. Eng. A150, 139 (1992).
30. G. Dreier, G. Ellsner, S. Schmauder, and T. Suga, J. Mater. Sci. 29, 1441 (1994).
31. T. Yamada, K. Yokoi, and A. Kohno, J. Mater. Sci. 25, 2188 (1990).
32. Smithells Metals Reference Book, edited by E. A. Brandes (Butterworths, London, UK).
33. H. Mizuhara, E. Huebel, and T. Oyama, Ceram. Bull. 68, 1591 (1989).
34. J. Salençon, Mécanique des Milieux Continus (Ellipses, Paris, 1988).
35. T. Pradell, P. Glaude, S.D. Peteves, and E. Bullock, JRC-Petten Establishment, CEC Technical report 12635 EN (1990).
36. S. Torbaty, J. M. Sprauel, G. Maeder, and P. H. Markho, Adv. X-ray Anal. 26, 245 (1983).
37. J. M. Sprauel and L. Castex, Proc. 1st Eur. Powder Diffraction Int. Conf. (EPDICl), München, March 14-16, 1991).
38. G. Maeder, J. L. Lebrun, and J. M. Sprauel, in Matériaux, mise en forme, pièces formées (Ed. du CNRS, Paris, 1989).
39. I. C. Noyan and J. B. Cohen, Residual Stresses (Springer-Verlag, New York, 1987), p. 117.
40. B. Eigenmann, B. Scholtes, and O. Vöhringer, cfi/Ber. DKG 66, 364 (1989).
41. F. Convert and B. Miege, J. Appl. Crystallogr. 25, 384 (1992).
42. M. G. Moore and W. P. Evans, SAE Trans. 66, 340 (1958).
43. Proc. 4th European Ceramic Society Conference, Vol. 9. edited by B. S. Tranchina and A. Bellosi (Gruppo Edit. Faenza, Faenza, Italy, 1995), p. 183.
44. P. J. Yvon, P. Moretto, and S. D. Peteves, IAM, JRC Petten, unpublished results (1995).
45. S. Srinivasan, P. J. Blau, and J. L. Bjerke, J. Mater. Res. 10, 95 (1995).
46. A. Frisch, W. A. Kaysser, W. Zhang, and G. Petzow, Acta Metall. Mater. 40, S361 (1992).
47. A. G. Youtsos, T. Timke, M. Kiriakopoulos, and G. Ceccone, JRC-Petten Establishment, Eur. Report P-A1-94-6 (1994).