Grain-size dependence of sliding wear in tetragonal zirconia polycrystals

Journal of the American Ceramic Society

Volumn 79, Issue 12, 1996, Pages 3090-3096

  He, Yingjie ^a   Winnubst, Louis ^a   Burggraaf, Anthonie J ^a   Verweij, Henk ^a,c   Van Der Varst, Paul G Th ^b   De With, Bert ^b,c  

^a UNIVERSITY OF TWENTE   (Netherlands)

^b EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

^c AMERICAN CERAMIC SOCIETY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATERIALS; CRACK INITIATION; DELAMINATION; DOPING (ADDITIVES); FRICTION; GRAIN SIZE AND SHAPE; PHASE TRANSITIONS; PLASTIC DEFORMATION; POLYCRYSTALS; WEAR RESISTANCE; YTTRIUM;

TRIBOMETERS; YTTRIA DOPED TETRAGONAL ZIRCONIA POLYCRYSTALS (Y TZP);

ZIRCONIA;

EID: 0030403352     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.1996.tb08081.x     Document Type: Article

References (33)

1. O. O. Ajayi and K. C. Ludema, "Surface Damage of Structural Ceramics: Implication for Wear Modelling," Wear, 124, 237-57 (1988).
2. D. B. Marshall, B. R. Lawn, and R. F. Cook, "Microstructural Effects on Grinding of Alumina and Glass-Ceramics," J. Am. Ceram. Soc., 70 [6] C-139-C-140 (1987).
3. R. W. Rice, "Micromechanics of Microstructural Aspects of Ceramic Wear," Ceram. Eng. Sci. Proc., 6 [7-8] 940-45 (1985).
4. C. C. Wu, R. W. Rice, D. Johnson, and B. A. Platt, "Grain Size Dependence of Wear in Ceramics," Ceram. Eng. Sci. Proc., 6 [7-8] 995-1011 (1985).
5. S. J. Cho, B. J. Hockey, B. R. Lawn, and S. J. Bennison, "Grain-Size and R-Curve Effects in the Abrasive Wear of Alumina," J. Am. Ceram. Soc., 72 [7] 1249-52 (1989).
6. H. Liu and M. E. Fine, "Modeling of Grain-Size-Dependent Microfracture-Controlled Sliding Wear in Polycrystalline Alumina," J. Am. Ceram. Soc., 76 [9] 2393-96 (1993).
7. A. J. Burggraaf, "Stuijts Memorial Lecture 1991: Some New Developments in Ceramic Science and Technology," J. Eur. Ceram. Soc., 9 [4] 245-50 (1992).
8. A. J. Burggraaf, A. J. A. Winnubst, and H. Verweij, "Dense and Porous Nanostructured Ceramics and Composites"; pp. 561-76 in Third Euro-Ceramics, Vol. 3, Engineering Ceramics (Proceedings of the Third European Ceramic Society Conference, Madrid, Spain, Sept. 12-17, 1993). Edited by P. Duran and J. F. Fernandez. Faenza Editrice Iberica, S.L., Castellón de la Plana, Spain, 1993.
9. G. S. A. M. Theunissen, J. S. Bouma, A. J. A. Winnubst, and A. J. Burggraaf, "Mechanical Properties of Ultra-Fine Grained Zirconia Ceramics," J. Mater. Sci., 27 [14] 4429-38 (1992).
10. M. M. R. Boutz, A. J. A. Winnubst, and A. J. Burggraaf, "The Effect of Ceria-Codoping on Chemical Stability and Fracture Toughness of Y-TZP," J. Mater. Sci., 30, 1854-62 (1995).
11. Y. J. He, A. J. A. Winnubst, C. D. Sagel-Ransijn, A. J. Burggraaf, and H. Verweij, "Enhanced Mechanical Properties by Grain Boundary Strengthening in Ultra-Fine Grained TZP Ceramics," J. Eur. Ceram. Soc., 16 [6] 601-12 (1996).
12. Y. J. He, A. J. A. Winnubst, A. J. Burggraaf, H. Verweij, P. van der Varst, and G. de With, "Influence of Porosity on Friction and Wear of Tetragonal Zirconia Polycrystal," J. Am. Ceram. Soc., in press.
13. P. H. J. van den Berg, G. de With, L. Dortmans, E. Kokmeijer, and G.-Z. Cao, "Wear and Friction of Y-TZP Spheres Reciprocating against Various Sialon Plates," J. Mater. Sci., 281, 3187-96 (1993).
14. W. Groot Zevert, A. J. A. Winnubst, G. S. A. M. Theunissen, and A. J. Burggraaf, "Powder Preparation and Compaction Behaviour of Fine-Grained Y-TZP," J. Mater. Sci., 25, 3449-55 (1990).
15. M. I. Mendelson, "Average Grain Size in Polycrystalline Ceramics," J. Am. Ceram. Soc., 52 [8] 443-46 (1969).
16. Y. J. He, A. J. A. Winnubst, H. Verweij, and A. J. Burggraaf, "Sinter Forging of Zirconia Toughened Alumina," J. Mater. Sci., 29 [24] 6505-12 (1994).
17. M. M. R. Boutz, A. J. A. Winnubst, A. J. Burggraaf, M. Nauer, and C. Carry, "Low Temperature Sinter Forging of Nanostructured Y-TZP"; pp. 275-83 in Science and Technology of Zirconia V. Edited by S. P. S. Badwal, M. J. Bannister, and R. H. J. Hannink. Technomic, Lancaster, PA, 1993.
18. 2 System by X-ray Diffraction," J. Am. Ceram. Soc., 67 [6] C-119-C-121 (1984).
19. K.-H. Zum Gahr, W. Bundschuh, and B. Zimmerlin, "Effect of Grain Size on Friction and Sliding Wear of Oxide Ceramics," Wear, 162-164, 269-79 (1993).
20. G. Grathwohl and T. Liu, "Strengthening of Zirconia-Alumina during Cyclic Fatigue Testing," J. Am. Ceram. Soc., 72 [10] 1988-90 (1989).
21. T. E. Fischer, M. P. Anderson, and S. Jahanmir, "Influence of Fracture Toughness on the Wear Resistance of Yttria-Doped Zirconium Oxide," J. Am. Ceram. Soc., 72 [2] 252-57 (1989).
22. P. H. J. van den Berg and G. de With, "Wear and Strength of Mg-PSZ, Worn on Hardened Steel," J. Eur. Ceram. Soc., 8 [2] 123-33 (1991).
23. E. O. Hall, "The Deformation and Ageing of Mild Steel: III Discussion of Results," Proc. Phys. Soc., London. B, 64, 747-53 (1951).
24. N. J. Petch, "The Cleavage Strength of Polycrystals," J. Iron Steel Inst., 174, 25-28 (1953).
25. W. Bundschuh and K.-H. Zum Gahr, "Influence of Porosity on Friction and Sliding Wear of Tetragonal Zirconia Polycrystal," Wear, 151, 175-91 (1991).
26. O. O. Ajayi and K. C. Ludema, "Formation of Transfer Film during Ceramics/Ceramics Repeat Pass Sliding"; pp. 349-59 in Wear of Materials. Edited by K. C. Ludema. American Society of Mechanical Engineers, New York, 1989.
27. 3 Ceramics," J. Mater. Sci., 18 [7] 1958-66 (1983).
28. Y. S. Wang, S. M. Hsu, and R. G. Munro, "A Wear Model for Alumina Sliding Wear"; pp. 1225-30 in Proceedings of the Japan International Tribology Conference, 1990, Vol. 2. Japan Society of Tribologists, Tokyo, Japan, 1990.
29. N. P. Suh, "An Overview of the Delamination Theory of Wear," Wear, 44 [1] 1-16 (1977).
30. G. W. Stachowiak and G. B. Stachowiak, "Unlubricated Friction and Wear Behaviour of Toughened Zirconia Ceramics," Wear, 132, 151-71 (1989).
31. R. M. Hooper and J. E. Morgan, "Wear Processes in the Diamond Grinding of Zirconia Ceramics," Wear, 130, 353-56 (1989).
32. Y. Fu and A. G. Evans, "Some Effects of Microcracks on the Mechanical Properties of Brittle Solids: I. Stress-Strain Relations," Acta Metall., 33 [8] 1515-23 (1985).
33. S. Kalpakjian, Manufacturing Engineering and Technology; Chs. 2, 31, and 32. Addison-Wesley, New York, 1992.