Sintering of ceramics

Materials Forum

Volumn 20, Issue , 1996, Pages 145-169

  Perera, D S ^a   Stewart, M W A ^a  

^a AUSTRALIAN NUCLEAR SCIENCE AND TECHNOLOGY ORGANISATION   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

LIQUID PHASE SINTERING;

HOT ISOSTATIC PRESSING; SINTERING;

CERAMIC MATERIALS;

EID: 0030402397     PISSN: 08832900     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Article

References (425)

1. L.L. Hench and D.L. Ulrich (eds.): Ultrastructure Processing of Ceramics Glasses and Composites, John Wiley and Sons, New York, 1984
2. H. Hausner, G.L. Messing and S. Hirano (eds.): Ceramic Powder Processing Science, 2nd Intnl. Conf., Berchtesgaden, FRG, Oct. 12-14 1988, Deutsche Keramische Gesellschaft, 1989
3. G.L. Messing, K.S. Mazdiyasn, J.W. McCauley and R.A. Haber (eds.): Ceramic Powder Science, Adv. in Ceram., 21, Am. Ceram. Soc., 1987
4. G.L. Messing, E.R. Fuller and H. Hausner (eds.): Ceramic Powder Science II, Ceram. Trans. 1, Am. Ceram Soc., 1988
5. G.L. Messing, S. Hirano and H. Hausner (eds.): Ceramic Powder Science III, Ceram. Trans. 12, Am. Ceram Soc., 1990
6. S. Hirano, G.L. Messing and H. Hausner (eds.): Ceramic Powder Science IV, Ceram. Trans. 22, Am. Ceram Soc., 1991
7. H. Hausner, G.L. Messing and S. Hirano (eds.): Ceramic Processing Science and Technology, Ceram. Trans. 51, Am. Ceram. Soc., 1995
8. L.L. Hench and J.K. West (eds.): Chemical Processing of Advanced Materials, John Wiley and Sons, New York, 1995
9. W.D. Kingery: in Ceramic Processing Before Firing, eds. G.Y. Onoda and L.L. Hench, John Wiley and Sons, New York, 1978, 291
10. G.L. Messing and R.M. German (eds.): Sintering 1995, Intnl. Conf. on the Science, Technology and Applications of Sintering, Sept. 24-27 1995, Penn State Scanticon, University Park, PA, USA, Materials Research Society, in press 1996
11. L. Nan (ed.): Sintering and Materials, 6th Intnl. Symp. on Science and Technology of Sintering, 23-25 Oct. 1995, Haikou, China, International Academic Pub., 1995
12. A.C.D. Chacklader and J.A. Lund (eds.): Sintering 91, Proc. 5th Intnl. Symp. on the Science and Technology of Sintering, 23-26 July 1991, Vancouver, Canada, Solid State Phenomena, 25-26, Trans Tech Pub., Zurich, 1992
13. S. Somiya, M. Shimada, M. Yoshimura and R. Watanabe (eds.): Sintering 87, Proc. 4th Intnl. Symp. on the Science and Technology of Sintering, 4-6 Sept., Tokyo, Japan, Elsevier Science Pub., London 1988
14. C.A. Handwerker, J.E. Blendell and W.A. Kaysser (eds.): Sintering of Advanced Ceramics, Proc. of The Symp. on Sintering of Advanced Ceramics, 2-5 May 1988, Cincinatti, OH, USA, Ceram. Trans. 7, Am. Ceram. Soc., 1990
15. D.P. Uskokovic, H. Palmour III and R.M. Spriggs: Science of Sintering - New Directions for Materials Processing and Microstructural Control, Proc. 7th World Round Table Conf. on Sintering, 28 Aug.-1 Sept. 1989, Herceg-Novi, Yugoslavia, Plenum Press, New York, 1989
16. G.C. Kuczynski, D.P. Uskokovic, H. Palmour III and M.M. Ristic (eds.): Sintering 85, 6th World Round Table Conf. on Sintering, 2-6 Sept. 1985, Herceg-Novi, Yugoslavia, Plenum Press, New York, 1987
17. D. Kolar, S. Pejovnik and M.M. Ristic (eds.): Sintering - Theory and Practice, 5th World Round Table Conf. on Sintering, 7-10 Sept. 1981, Portoroz, Yugoslavia, Mater. Sci. Monographs, 14, Elsevier Science Pub., Amsterdam 1982
18. M.M. Ristic (eds.): Sintering - New Developments, 4th World Round Table Conf. on Sintering, 5-10 Sept. 1977, Dubrovnik, Yugoslavia, Mater. Sci. Monographs, 4, Elsevier Science Pub., Amsterdam 1979
19. M.M. Ristic (ed.): Sintering - Theory and Practice, 3th World Round Table Conf. on Sintering, 3-8 Sept. 1973, Herceg-Novi, Yugoslavia, Phys. Sint., 1973, 5, [2/2], Boris Kioric Inst. Nucl. Sci., Belgrade, Yugoslavia, 1973
20. G.C. Kuczynski, A.E. Miller and G.A. Sargent (eds.): Sintering and Heterogeneous Catalysis, 6th Intnl. Conf. on Sintering and Related Phenomena, 6-8 June 1983, Notre Dame IN, USA, Mater. Sci. Res., 16, Plenum, New York, 1984
21. G.C. Kuczynski (ed.): Sintering Processes, 5th Intnl. Conf. on Sintering and Related Phenomena, 18-20 June 1979, Notre Dame IN, USA, Mater. Sci. Res. 13, Plenum, New York, 1980
22. G.C. Kuczynski (ed.): Sintering and Catalysis, 4th Intnl. Conf. on Sintering and Related Phenomena, July 1975, Notre Dame IN, USA, Mater. Sci. Res., 10, Plenum, New York, 1976
23. G.C. Kuczynski (ed.): Sintering and Related Phenomena, 3th Intnl. Conf. on Sintering and Related Phenomena, 5-7 June 1972, Notre Dame IN, USA, Mater. Sci. Res., 6, Plenum, New York, 1973
24. G.C. Kuczynski, N.A. Hooton and C.F. Gibbon (eds.): Sintering and Related Phenomena, 2th Intnl. Conf. on Sintering and Related Phenomena, 21-23 June 1965, Notre Dame IN, USA, Gordon and Breach, New York, 1967
25. G.S. Upadhyaya: Sintering of Multiphase Metal and Ceramic Systems, Proc. Intnl. Conf., 31 Jan.-3 Feb. 1989, Solid State Phenomena, 8-9, New Delhi, Sci-Tech Pub., Brookfield, VT, USA, 1990
26. S. Somiya and Y. Moriyoshi (eds.): Sintering Key Papers, Elsevier Science Pub., London 1989.
27. M.B. Waldron and B.L. Daniell: Sintering, Heyden, London, 1979
28. V.A. Ivensen: Densification of Metal Powders During Sintering, Translated by E. Renner, Consultants Bureau, New York 1973
29. R.M. German: Liquid Phase Sintering, Plenum, New York, 1985
30. H.E. Exner: Rev. on Powder Metal. and Phys. Ceram., 1979, 1, 1
31. R.J. Brook: Ceram. Trans., 1990, 7, 3
32. R.J. Brook, W.H. Tuan and L.A. Xue: Ceram. Trans., 1988, 1, 811
33. R.J. Brook: in Concise Encyclopaedia of Advanced Ceramic Materials, R.J. Brook, R.W. Cahn and M.B. Bever, eds., Pergamon Press, Oxford, 1986, 281
34. S. Wu, E. Gilbart and R.J. Brook: Adv. in Ceram., 1984, 10, 574
35. R.J. Brook: Proc. Brit. Ceram. Soc., 1982, 10, 7
36. M.S. Shaikh and G.S. Tendolkar: in Proceedings of the Symposium on Powders and Sintered Products, 31 Jan.-1 Feb. 1971, Indian Institute of Technology, Kanpur, India, Dept. Atomic Energy (India), 1971, 44
37. J.E. Burke: in ref. 26, 3
38. J.E. Burke: in Ceramic Fabrication Processes, W.D. Kingery, ed., John Wiley and Sons, New York, 1958, 120
39. D.W. Budworth: Introduction to Ceramic Science, Pergamon, Oxford, 1970, 244
40. C.A. Handwerker, J.E. Blendell and R.L. Coble: in ref. 15, 3
41. C.A. Handwerker, R.M. Cannon and R.L. Coble: Adv. in Ceram., 1984, 10, 619
42. R.L. Coble: in ref. 23, 177
43. R.L. Coble and J.E. Burke: in Progress in Ceramic Science Volume 3, J.E. Burke, ed., Pergamon, Oxford, 1963, 197
44. W.S. Coblenz, J.M. Dynys, R.M. Cannon and R.L. Coble: in ref. 21, 141.
45. M.A. Eudier: in Powder Metallurgy, W. Leszynski, ed., Interscience, New York, 1961, 137
46. M.A. Eudier: in Symposium on Powder Metallurgy, Special report No. 58, Iron and Steel Institute, London, 1956, 59
47. H.E. Exner and E. Arzt: in Physical Metallurgy, R.W. Cahn and P. Haasen, eds. North Holland, Amsterdam, 1983, 1885
48. D. Uskokovic and H.E. Exner: Sci. of Sint., 1977, 9, (3), 265
49. H.E. Exner: in ref. 13, 291
50. H.E. Exner and G. Petzow: in ref. 21, 107
51. R.M. German: Chapters 6 and 7 in Powder Metallurgy Science, Metal Powder Industries Federation, 1984, 145
52. R.M. German: in Ceramics and Glasses, Engineered Materials Handbook 4, ASM, 1991, 260
53. O. Kwon: ibid., 285
54. J.S. Haggerty, ibid., 291
55. M.F. Yan, ibid., 270
56. M.F. Yan: Adv. in Ceram. 1987, 21, 635
57. M.F. Yan: Mater. Sci. Eng., 1981, 48, 53
58. R.L. Coble and R.M. Cannon: Mat Sci. Res., 1978, 11, 151
59. R.J. Brook: in ref. 2, 667
60. A.M. Glaeser: in Science of Ceramic Interfaces, J. Nowotny, ed., Mater. Sci. Monographs, 75, Elsevier Science Pub., London, 1991, 287
61. W.H. Gitzen: Alumina as a Ceramic Material, Am. Ceram. Soc., Columbus, OH, 1971, 127
62. S.J. Bennison and M.P. Harmer: Ceram. Trans., 1990, 7, 13
63. M.P. Harmer: Ceram. Trans., 1988, 1, 824
64. M.P. Harmer: Adv. in Ceram., 1984, 10, 679
65. H. Hausner: Chapter 7 in Handbook of Powder Metallurgy, Chemical Pub. Co., 1973, 144
66. H. Hausner: in ref. 18, 3
67. H. Hausner: in ref. 19, 429
68. H. Hausner: in Symposium on Powder Metallurgy, Special report No. 58, Iron and Steel Institute, London, 1956, 102
69. D.L. Johnson: in ref. 17, 17
70. D.L. Johnson: in ref. 21, 97
71. D.L. Johnson: in Processing of Crystalline Ceramics, H. Palmour III, R.F. Davis and T.M. Hare, eds., Mater. Sci. Res., 11, Plenum, New York, 1978, 137
72. G.R. Miller and O.W. Johnson: ibid., 181
73. D.L. Johnson: in ref. 23, 363
74. D.L. Johnson: in Modern Developments in Powder Metallurgy - Volume 4 - Processes, H.H. Hausner, ed., Plenum, New York, 1971, 189
75. D.L. Johnson: in Powder Metallurgy for High Performance Applications, J.J. Burke and V. Weiss, eds., Syracuse University Press, New York, 1972, 139
76. W.A. Kaysser: in ref. 4, 955
77. G. Petzow, W.A. Kaysser and M.A. Amtenbrink: in ref. 17, 1982, 27.7
78. W.D. Kingery: in ref. 12, 1
79. W.D. Kingery, H.K. Bowen and D.R. Uhlmann: Introduction to Ceramics, 2nd ed. John Wiley and Sons, New York, 1976
80. G.C. Kuczynski: Powder Metallurgy for High Performance Applications, J.J. Burke and V. Weiss, eds., Syracuse University Press, New York, 1972, 101
81. G.C. Kuczynski: in ref. 26, 501
82. G.C. Kuczynski: in ref. 16 3
83. G.C. Kuczynski: in Modern Developments in Powder Metallurgy - Volume 1 - Fundamentals and Methods, H.H. Hausner, ed., Plenum, New York, 1966, 11
84. G.C. Kuczynski: in Powder Metallurgy, W. Leszynski, ed., Interscience, New York, 1961, 11
85. F.F. Lange: J. Am. Ceram. Soc., 1989, 72, 3
86. F.F. Lange: J. Am. Ceram. Soc., 1984, 67, 83
87. F.F. Lange: Mater. Res. Soc. Symp. Proc., 1984, 24, 247
88. F.V. Lenel: in ref. 26 543
89. F.V. Lenel: in Powder Metallurgy for High Performance Applications, J.J. Burke and V. Weiss, eds., Syracuse University Press, New York, 1972, 119
90. R. Pampuch and J. Lis: in ref. 25, 1990, 83
91. M. Paulus: in ref. 23, 225
92. L.L. Seigel and J. Brett: in ref. 24: 1967, 273
93. 93. M.M. Ristic: in ref. 17, 1
94. J.G.R. Rockland: Acta Met., 1967, 15, 277 and 1966, 14, 1273
95. J.G.R. Rockland: Acta Met., 1967, 15, 277 and 1966, 14, 1273
96. M.H. Tikkanen and S. Yasaari: in Modern Developments in Powder Metallurgy - Volume 1 - Fundamentals and Methods, H.H. Hausner, ed., Plenum, New York, 1966, 297
97. M.H. Tikkanen: in ref. 19, 441
98. D.W. Richerson: Modern Ceramic Engineering, 2nd ed., Marcel Dekker, New York, 1992, 519
99. V.V. Skorohod: in ref. 15, 39
100. V.V. Skorohod: in ref. 16, 81
101. A.L. Stuijts: in ref. 23, 331
102. F. Thummler and W. Thomma: Met Rev 115, 1967, 12, 69
103. F. Thummler and W. Thomma: in Modern Developments in Powder Metallurgy - Volume 1 - Fundamentals and Methods, H.H. Hausner, ed., Plenum, New York, 1966, 361
104. J. White: in Science of Ceramics - Volume 1, G.H. Stewart, ed., Academic Press, 1962, 1
105. J. White in ref. 24, 245
106. W.D. Jones: Fundamental principles of Powder Metallurgy, Edward Arnold, London, 1960, 386
107. C.G. Goetzel: Treatise on Powder Metallurgy - Volume 2, Interscience, New York, 1950, 797
108. W.E. Kingston and G.F. Huettig: in The Physics of Powder Metallurgy, W.E. Kingston, ed., McGraw-Hill, New York, 1951, 1
109. R.E. Bernard: Powd. Met., 1959, 3, 86
110. I.M. Fedorchenko and R.A. Andrievski: Powd. Met., 1959, 3, 147
111. K.D. Reeve: J. Aust. Ceram. Soc., 1966, 2, 38
112. M.J. Bannister, AAEC/E121, 1964
113. D. Kolar: in ref. 21., 335
114. D. Kolar: in ref. 16, 241
115. P. Reyen: in ref. 21, 377
116. D.W. Ready: Ceram. Trans., 1990, 7, 86
117. D.W. Ready, J. Lee and T. Quadir: in ref. 20, 115
118. C. Greskovich and J.L. Rossolowski: J. Am. Ceram. Soc., 1976, 59, 336
119. R.T. DeHoff: in ref. 15, 55
120. K.R. Mikeska, G.W. Scherer and K. Bordia: Ceram. Trans., 1990, 7, 200
121. C.J. Brinker and G.W. Scherer: Sol-Gel Science, Academic Press, Boston, 1988, 675
122. A.C.F. Cocks: Acta Met., 1994, 42, 2191
123. A.G. Evans: J. Am. Ceram. Soc., 1982, 65, 497
124. A.G. Evans: MRS Symp. Proc., 1986, 60, 63
125. R.J. Brook: in Ceramic Fabrication Processes, F.F.Y. Wang, ed., Treatise on Materials Science and Technology 9, Academic Press, 1976, 331
126. S. Bennison: in Ceramics and Glasses, Engineered Materials Handbook 4, ASM, 1991, 304
127. J. Honstra: in Science of Ceramics - Volume 2, G.H. Stewart, ed., Academic Press, 1965, 191
128. J.E. Burke: in Kinetics of High Temperature Processes, W.D. Kingery, ed., Technology Press MIT, Cambridge, MA, 1958, 109
129. J.E. Burke: J. Am. Ceram. Soc., 1957, 40, 80
130. O.J. Whittemore and J.A. Varela: in ref. 26, 777
131. J.A. Pask: in ref. 15, 381
132. J.E. Burke: Ceram. Trans., 1990, 7, 215
133. H. Hausner: in Symposium on Powder Metallurgy, Special report No. 58, Iron and Steel Institute, London, 1956, 102
134. W.D. Kingery: in Ceramics Adding the Value, Proc. Austceram 92, (proc. conf.) Melbourne, Aust., 16-21 Aug. 1992, M.J. Bannister, ed., Aust. Ceram. Soc., CSIRO Pub., 1992, 1
135. C.G. Goetzel: Treatise on Powder Metallurgy - Volume 1, Interscience, New York, 1949, 17
136. W.H. Wollaston: Phil. Trans. Roy. Soc., 1829, 119, 1
137. D.W. Richerson: Modern Ceramic Engineering, 1st ed., Marcel Decker, New York, 1982, 77
138. R.L. Coble: in Ceramic Fabrication Processes, W.D. Kingery, ed., John Wiley and Sons, 1958, 213
139. R. Brook: Mater. Sci. Res., 1986, 20, 1
140. M.F. Yan, R.M. Cannon, U. Chowdhry and H.K. Bowen: Am. Ceram. Soc. Bull., 1977, 56, 291
141. S.J. Bennison and M.P. Harmer:, J. Am. Ceram. Soc., 1983, 66, C-90
142. Kingery and Francois: in ref. 24, 471 and 499
143. G.C. Kuczynski, S. Matsumara and B.D. Cullity: Acta Met., 1960, 8, 209
144. R.M. German and B.H. Rabin: Powd. Met., 1985, 28, 7
145. R.M. German: in ref. 17, 177
146. A. Frisch, W.A. Kaysser and G. Petzow: in ref. 15, 1989, 311
147. L.C. De Jonghe and M.N. Rahaman: Acta. Met. 1988, 36, 233
148. W.H. Rhodes: J. Am. Ceram. Soc., 1981, 64, 13
149. C. Fan and M.N. Rahaman: J. Am. Ceram. Soc., 1992, 75, 2056 and 2066
150. M.N. Rahaman and L.C. De Jonghe: J. Am. Ceram. Soc., 1991, 74, 433
151. K.G. Nickel and G. Petzow: in ref. 12, 11
152. D. Kolar: Ceram. Trans., 1990, 7, 529
153. P. Rejnen and A.C. Firatli: Interceram, 1984, 6, 19
154. G.C. Kuczynski: Met. Trans. (AIME), 1949, 185, 169
155. G.C. Kuczynski: J. Appl. Phys., 1950, 21, 632
156. M. Chu, M.N. Rahaman, L.C. De Jonghe and R.J. Brook: J. Am. Ceram. Soc., 1991, 74, 1217
157. M. Chu, L.C. De Jonghe, M.K.F. Lin and F.J.T. Lin: J. Am. Ceram. Soc., 1991, 74, 2902
158. M.N. Rahaman, L.C. De Jonghe and M. Chu: J. Am. Ceram. Soc., 1991, 74, 514
159. G.W. Scherer: J. Am. Ceram. Soc., 1991, 74, 1523
160. M.N. Rahaman and L.C. De Jonghe: J. Am. Ceram. Soc., 1990, 73, 707
161. M.N. Rahaman and L.C. De Jonghe: J. Am. Ceram. Soc., 1990, 73, 602
162. V. Ducamp and R. Raj: J. Am. Ceram. Soc., 1989, 72, 789
163. M.N. Rahaman, L.C. De Jonghe and R.J. Brook: J. Am. Ceram. Soc., 1986, 69, 53
164. M. Lin, M.N. Rahaman and L.C. De Jonghe: J. Am. Ceram. Soc., 1987, 70, 360
165. M.N. Rahaman and L.C. De Jonghe: J. Mater. Sci., 1987, 22, 4326
166. R.K. Bordia and G.W. Scherer: Acta Met., 1988, 36, 2393, 2399 and 2411
167. M.N. Rahaman, L.C. De Jonghe, G.W. Scherer and R.J. Brook: J. Am. Ceram. Soc., 1987, 70, 766
168. G.W. Scherer: J. Am. Ceram. Soc., 1986, 69, C-206
169. K.R. Venkatachari and R. Raj: J. Am. Ceram. Soc., 1986, 69, 499
170. M.N. Rahaman, L.C. De Jonghe and C.H. Hsueh: J. Am. Ceram. Soc., 1986, 69, 58
171. M.N. Rahaman and L.C. De Jonghe: J. Am. Ceram. Soc., 1984, 67, C-205
172. R. Raj: J. Am. Ceram. Soc., 1982, 65, C-46
173. K. Mikeska, G.W. Scherer and R.K. Bordia: Ceram. Trans., 1990, 7, 200
174. L.C. De Jonghe and M.N. Rahaman: Acta Met., 1988, 36, 223
175. M. Chu, L.C. De Jonghe and M.N. Rahaman: Acta Met., 1989, 37, 1415
176. R. Raj and R.K. Bordia: Acta Met., 1984, 32, 1003
177. See ref. 10 for several recent papers
178. A. Jagota and P.R. Dawson: Acta Met., 1988, 36, 2551 and 2563
179. A. Jagota and P.R. Dawson J. Am. Ceram. Soc., 1990, 73, 173
180. A. Jagota, K.R. Mikeska and R.K. Bordia: J. Am. Ceram. Soc., 1990, 73, 2266
181. R.M. McMeeking and J. Xu: in HIP'93, Proc. Intnl. Conf. on Hot Isostatic Pressing, L. Delaey and H. Tas, eds., 21-23 April 1993, Antwerp, Belgium, Elsevier Science Pub., Amsterdam, 1994, 15.
182. R.M. Govindarajan and N. Aravas: ibid., 29
183. E.A. Olevsky, M.B. Shtern and V.V. Skorohod: ibid., 45
184. N. Ramakrishnan, T.B. Bhat and V.S. Arunachalam: Acta Met., 1984, 32, 357
185. Y. Zhoa and R.L. Dharani: Thin Solid Films, 1994, 245, 109
186. H. Riedel: Ceram. Trans., 1990, 12, 619
187. A. Nohara, T. Nakagawa and T. Soh: in ref. 13, 1988, 749
188. R.T. DeHoff: in ref. 15, 1989, 55
189. F.N. Rhines and R.T. DeHoff: in Modern Developments in Powder Metallurgy - Volume 4 - Fundamentals and Methods, H.H. Hausner, ed., Plenum, New York, 1971, 173
190. R.T. DeHoff, R.A. Rummel, F.N. Rhines and A.H. Long: in Powder Metallurgy, W. Leszynski, ed., Interscience, New York, 1961, 31
191. R.T. DeHoff, R.A. Rummel, H.P. LaBuff and F.N. Rhines: in Modern Developments in Powder Metallurgy - Volume 1 - Fundamentals and Methods, H.H. Hausner, ed., Plenum, New York, 1966, 310
192. E.H. Aigeltinger and R.T. DeHoff: in Perspectives in Powder Metallurgy - Volume 5, J.S. Hirschhorn and K.H. Roll, eds., Plenum, New York, 1970, 81.
193. M.N. Rahaman: in ref. 10, in press
194. J.E. Burke, K.W. Lay and S. Prochazka: Mater. Sci. Res., 1980, 13, 417
195. H. Tanaka: in Silicon Carbide Ceramics 1, S. Somiya and Y. Inomata, eds., Elsevier Science Pub., London, 1990, 213.
196. S. Prochazka: in Special Ceramics 6, P. Popper, ed., Brit. Ceram. Res. Assoc., Manchester, UK, 1975, 171
197. H. Song and R.L. Coble: J. Am. Ceram. Soc., 1990, 73, 2077
198. G.L. Messing: Anisotropic Grain Growth for the Development of Ceramics with Novel Microstructures, in ref. 10, in press
199. A.M. Thompson, M.P. Harmer and D.B. Williams: in ref. 10, in press
200. J.D. Powers, L. Kulinsky and A.M. Glaeser: in ref. 10, in press
201. S. Sumita and H.K. Bowen: Ceram. Trans., 1989, 1, 840
202. J.M. Wu and H.M. Sung: J. Am. Ceram. Soc., 1990, 73, 996
203. M.D. Sacks, T.S. Yeh and S.D. Vora: in ref. 2., 693
204. T.R. Gattuso and H.K. Bowen:, Adv. in Ceram., 1984, 10, 644
205. J.E. Davis, V.G. Carithers and D.R. Watson: Am. Ceram. Soc. Bull., 1971, 50, 906
206. E.A. Barringer and H.K. Bowen: J. Am. Ceram. Soc., 1982, 65, C-199
207. E.A. Barringer, R. Brook and H.K. Bowen: Mater. Sci. Res., 1984, 16, 1
208. M. Astier, G. Brula, F. Lecomte, J.P. Reymond and P. Vergon: in ref. 18, 150
209. T. Yamaguchi and G. Mian: J. Am. Ceram. Soc., 1991, 74, 1955
210. N. Mizutani, T. Ogihara, M. Kondo, M. Ikeda and K. Shinozaki: J. Mater. Sci., 1994, 29, 366
211. S.J. Milne, M. Patel and E. Dickinson: J. Eur. Ceram. Soc., 1993, 11, 1
212. J.P. Smith and G.L. Messing: J. Am. Ceram. Soc., 1984, 67, 238
213. M.F. Yan, R.M. Cannon, H.K. Bowen and U. Chowdhry: Mater. Sci. Eng., 1983, 60, 275
214. M.D. Sacks and S.D. Vora: J. Am. Ceram. Soc., 1988, 71, 245
215. M.D. Sacks and T.Y. Tseng: J. Am. Ceram. Soc., 1984, 67, 532
216. T.S. Yeh and M.D. Sacks: J. Am. Ceram. Soc., 1988, 71, 841
217. R.L. Coble: J. Am. Ceram. Soc., 1973, 56, 461
218. J.M. Ting and R.Y. Lin: J. Mater. Sci., 1994, 29, 1867.204
219. J.S. Chappell and T.A. Ring: J. Appl. Phys., 1986, 60, 383
220. L.C. De Jonghe, M.N. Rahaman and M. Lin: Mater. Sci. Res., 1987, 21, 447
221. W.H. Rhodes: J. Am. Ceram. Soc., 1981, 64, 19
222. E. Linger and R. Raj: J. Am. Ceram. Soc., 1988, 71, C-408
223. E. Linger and R. Raj: J. Am. Ceram. Soc., 1987, 70, 843
224. K.D. Reeve: Am. Ceram. Soc. Bull., 1963, 42, 452
225. F.F. Lange: Phenomena and Thermodynamics of De-sintering, in ref. 10, 1996, in press
226. H. Palmour III and D. R. Johnson: ref 24, 779
227. H. Palmour III, M.L. Huckabee and T.M. Hare: in ref. 18, 46
228. M.L. Huckabee, T.M. Hare and H. Palmour III: Mater. Sci. Res., 1978, 11, 205
229. H. Palmour III, T.M. Hare and R.L. Russel: Mater. Res. Soc. Symp. Proc., 1992, 251, 211
230. H. Palmour III and M.L. Huckabee: in ref. 23, 1973, 275
231. H. Palmour and T.M. Hare: in ref. 16, 17
232. A.D. Batchelor: An Experimental Approach to the Sintering Methodology for a Complex Ceramic System, Ph.D. Dissertation, North Carolina State University, Raleigh, NC, USA, 1985
233. H. Fowler: J. Aust. Ceram. Soc., 1970, 6, 1
234. D.E. Garcia, J. Seidel, R. Janssen and N. Claussen: J. Eur. Ceram. Soc., 1995, 15, 935
235. D.L. Johnson and J.S. Kim: in ref. 17, 573
236. P. Vergon, M. Astier, D. Beruto, G. Brula and S.J. Teicher: Rev. Int. Hautes Temper. et Refract., 1972, 9, 271
237. C.S. Morgan and C.S. Yust: J. Nucl. Mater., 1963, 10, 182
238. M.I. Nieto, P. Miranzo, S. Aza, and J.S. Moya: J. Ceram. Soc. Jap., 1992, 100, 459
239. D.W. Readey and G.C. Kuczynski: J. Am. Ceram. Soc., 1966, 49, 26
240. J. White: J. Aust. Ceram. Soc., 1974, 10, 1
241. C. Wagner: J. Appl. Phys., 1958, 19, 1295
242. V.L.K. Lou, T.E. Mitchell and A.H. Heuer: J. Am. Ceram. Soc., 1985, 68, 49
243. A.H. Heuer and V.L.K. Lou: J. Am. Ceram. Soc., 1990, 73, 2785
244. H. Wiedemeier and M. Singh: J. Mater. Sci., 1991, 26, 2421
245. F.J. Ryerson: J. Am. Ceram. Soc., 1984, 67, 75
246. D.S. Perera: in Ceramics Adding the Value, Proc. Austceram 92, (proc. conf.) Melbourne, Aust., 16-21 Aug. 1992, M.J. Bannister, ed., Aust. Ceram. Soc., CSIRO Pub., 1992, 545
247. I.B. Cutler: J. Am. Ceram. Soc., 1969, 52, 11
248. J.L. Hebrad, P. Nortier, M. Pijolat and M. Soustelle: J. Am. Ceram. Soc., 1990, 73, 79
249. J.L. Hebrad, M. Pijolat and M. Soustelle: Solid State Ionics, 1989, 32/33, 85
250. M. Pijolat and M. Soustelle: in ref. 15, 83
251. F. Gruy and M. Pijolat: J. Am. Ceram. Soc., 1992, 75, 657 and 663
252. D. Beruto, R. Botter and A.W. Searcy: J. Am. Ceram. Soc., 1987, 70, 155
253. M.J. Readey and D.W. Readey: J. Am. Ceram. Soc., 1987, 70, C-358
254. J. Lee and D.W. Readey: in ref. 20, 145
255. F. Sauerwald: Z. Anorg. Alleg. Chem., 1922, 122, 277
256. W. Trzebiatowski: Naturwiss, 1933, 10, 205
257. M. Yu. Bal'shin: Vestnik Metalloprom., 1936, 16, (17) 87 and (18) 82 and 91
258. M. Yu. Bal'shin: Vestnik Metalloprom., 1936, 16, (17) 87 and (18) 82 and 91
259. M. Yu. Bal'shin: Vestnik Metalloprom., 1936, 18, (2) 124 and (4) 89
260. M. Yu. Bal'shin: Vestnik Metalloprom., 1936, 18, (2) 124 and (4) 89
261. M. Yu. Bal'shin: Theoretical Powder Metallurgy, Mettallurgizdat, Moscow, 1948
262. A.G. Smekal: in The Physics of Powder Metallurgy, W.E. Kingston, ed., McGraw-Hill, New York, 1951, 27
263. J.A. Hedvall: Z. Physik. Chem., 1926, 33, 123
264. A. Reis: quoted in ref. 106, 829
265. C.C. Balke: Iron Age, 1941, 147, 23
266. J. Pask: in ref. 26, 567
267. C.E. Hoge and J.A. Pask: in ref. 19, 111
268. J.A. Pask and C.E. Hoge: in ref. 22, 229
269. R. Koththavasal, R. Venkatachari and R. Raj: J. Am. Ceram. Soc., 1986, 69, 499
270. C.A. Handwerker, J.M. Dynys, R.M. Cannon and R.L. Coble: J. Am. Ceram. Soc., 1990, 73, 1365 and 1371
271. R.L. Coble: J. Appl. Phys., 1970, 41, 4798
272. J. K. MacKenzie and R. Shuttleworth: Proc. Phys. Soc., 1949, B62, 833
273. R.L. Coble: J. Am. Ceram. Soc., 1962, 45, 123
274. M.O. Warman and D.W. Budworth: Trans. Brit. Ceram. Soc., 1967, 66, 265
275. A.J. Schaler and J. Wulff: Phys. Rev., 1947, 72, 79
276. M.W.A. Stewart and W.J. Buykx: J. Am. Ceram. Soc., 1988, 71, C-68
277. M.W.A. Stewart and W.J. Buykx: Adv. in Ceram., 1989, 27, 109
278. W.D. Kingery and B. Francois: in ref. 24, 1967, 471 and 499
279. B.J. Kellet and F.F. Lange: J. Am. Ceram. Soc., 1989, 72, 725
280. K.J. Yoon, S.J.L. Kang: J. Eur. Ceram. Soc., 1990, 6, 201
281. E.B. Slamovich and F.F. Lange: J. Am. Ceram. Soc., 1993, 76, 1584
282. B.J. Kellet and F.F. Lange: J. Am. Ceram. Soc., 1988, 71, 7
283. L.A. Xu: J. Am. Ceram. Soc., 1989, 72, 1536
284. A.G. Evans and C.H. Hsueh: J. Am. Ceram. Soc., 1986, 69, 444
285. M.A. Spears and A.G. Evans: Acta Met., 1982, 30, 1281
286. C.H. Hsueh, A.G. Evans and R.L. Coble: Acta Met., 1982, 30, 1269
287. J. Zhao and M.P. Harmer: J. Am. Ceram. Soc., 1988, 71, 530 and 113
288. H.E. Exner: Acta Met., 1987, 35, 587
289. F.B. Swinkels and M.F. Ashby: Acta Met., 1981, 29, 259
290. F.B. Swinkels: Mechanisms of Sintering and Pressure Sintering, Ph.D. Thesis, University of Cambridge, Cambridge, UK, 1980
291. P.E. Wertbland and J. Wulff: in Powder Metallurgy, ed. J. Wulff, Am. Soc. Met., Cleveland, OH, USA, 1942, 36
292. J. Frenkel: J. Phys. U.S.S.R., 1945, 9, 385
293. W.D. Kingery and M. Berg: J. Appl. Phys., 1955, 26, 1205
294. F. R. N. Nabarro: in Conference of Strength of Solids (University of Bristol, 1947), The Physical Society, London, 1948, 75
295. H. Udin, A.J. Shaler and J. Wulff: J. Metals, 1949, 1, 186
296. P. W. Clarke and J. White: Trans. Brit. Ceram Soc., 1950, 49, 305
297. E.B. Allison and P. Murray: Acta Met., 1954, 2, 488
298. F.V. Lenel and G.S. Ansell: in Modern Developments in Powder Metallurgy - Volume 1 - Fundamentals and Methods, H.H. Hausner, ed., Plenum, New York, 1966, 281
299. F.V. Lenel, G.S. Ansell and R.C. Morris: in n Modern Developments in Powder Metallurgy - Volume 4 - Processes, H.H. Hausner, ed., Plenum, New York, 1971, 199
300. J.E. Sheehan, F.V. Lenel and G.S. Ansell: in ref. 19, 13
301. F.V. Lenel and G.S. Ansell: in ref. 24, 351
302. W. Schatt and E. Freidrich: in Powder Metallurgy and Related High Temperature Materials, Trans Tech Pub., Switz., Key Eng. Mater., 1989, 29-31, 73
303. W. Schatt and E. Freidrich: in ref. 16, 133
304. W. Schatt and E. Freidrich: in ref. 13, 267
305. B. Ya. Pines: Ukrain. Phys. Tech. Inst. and State Univ. Sci. Publ., 1946, Jan 15
306. F.N. Rhines: Powd. Met. Bull., 1948, 3, 28
307. F.N. Rhines: Trans. AIMME, 1946, 166, 474.
308. C. Herring: in The Physics of Powder Metallurgy, W.E. Kingston, ed., McGraw-Hill, New York, 1951, 143
309. C. Herring: J. Appl. Phys., 1950, 21, 437
310. C. Herring: J. Appl. Phys., 1950, 21, 301
311. H. Song, R.L. Coble and R.J. Brook: in ref. 20, 63
312. W.D. Jones: Acta Met., 1959, 7, 222
313. B.H. Alexander and R.W. Balluffi: J. Metals, 1950, 188, 1219
314. B.H. Alexander and R.W. Balluffi: Acta Met. 1957, 5, 666
315. R.W. Balluffi and L. Seigle: Acta Met., 1955, 3, 170
316. R.W. Balluffi: Grain Boundary Structure and Kinetics, ASM, Metals Park, OH, USA, 1980
317. H. Gleiter: in Physical Metallurgy, R.W. Cahn and P. Haasen, eds., North Holland, Amsterdam, 1983, 649
318. J. Brett and L. Seigle: Acta Met., 1966, 14, 575
319. L.L. Seigle and J. Brett: in ref. 24, 273
320. G. Cizeron: in Modern Developments in Powder Metallurgy - Volume 1 - Fundamentals and Methods, H.H. Hausner, ed., Plenum, New York, 1966, 376
321. F. Thummler and W. Thomma: ibid., 361
322. K.E. Easterling and A.R. Tholen: in Modern Developments in Powder Metallurgy - Volume 4 - Processes, H.H. Hausner, ed., Plenum, New York, 1971, 221
323. G. Petzow and H.E. Exner: in ref. 26, 639
324. H.E. Exner and G. Petzow: in ref. 22, 279
325. R.M. German and Z.A. Munir: J. Am. Ceram. Soc., 1976, 59, 379
326. R.M. German and Z.A. Munir: in ref. 22, 249
327. H.E. Exner: Powd. Met., 1980, 4, 203
328. F.A. Nichols: Scripta Met., 1980, 14, 951
329. F.A. Nichols and W.W. Mullins, 1965, 36, 1826
330. D.L. Johnson: in ref. 26, 1989, 357
331. K.S. Hwang and R.M. German: in ref. 20, 35
332. R.L Coble: J. Appl. Phys., 1963, 32, 787 and 793 and 1965, 36, 2327
333. R.L Coble: J. Appl. Phys., 1963, 32, 787 and 793 and 1965, 36, 2327
334. R. L. Coble: J. Am. Ceram. Soc., 1958, 41, 55
335. R.L. Coble and T.K. Gupta: in ref. 24, 423
336. J. Zhao and M.P. Harmer: J. Am. Ceram.Soc., 1992, 75, 830
337. J. Zhao and M.P. Harmer: Phil. Mag. Lttrs., 1991, 63, 7
338. D.L. Johnson: J. Am. Ceram. Soc., 1970, 53, 574
339. M.F. Ashby: Acta Met., 1974, 22, 275
340. J.L. Woolfrey and M.J. Bannister: J. Am. Ceram. Soc., 1972, 55, 392.
341. J.D. Hansen, R.P. Rusin, M.H. Teng and D.L. Johnson: J. Am. Ceram. Soc., 1992, 75, 1129
342. T.M. Shaw: J. Am. Ceram. Soc., 1993, Am. Ceram. Soc., 1993, 76, 281
343. G.C. Kuczynski: in ref. 17, 37
344. G.C. Kuczynski: in ref. 19, 41
345. G.C. Kuczynski: in ref. 22, 325
346. J. Rodel and A.M. Glaeser: J. Am. Ceram. Soc., 1990, 73, 3292 and 3302
347. J. Rodel and A.M. Glaeser: J. Am. Ceram. Soc., 1987, 70, C-172
348. J. Rodel and A.M. Glaeser: Ceram. Trans., 1990, 7, 243. and 280
349. J.H. Jean and T.A. Ring: Am. Ceram. Soc. Bull., 1986, 65, 1986
350. B. Fegley Jr., E.A. Barringer, H.K. Bowen: J. Am. Ceram. Soc.,1984, 67, C-113
351. E. Barringer, N. Jubb, B. Fegley, R.L. Pober and H.K. Bowen: in ref. 1, 315
352. L.H. Edelson and A.M. Glaeser: J. Am. Ceram. Soc., 1988, 71, C-198
353. L. Springer and M.F. Yan: in ref. 1, 464
354. M.F. Yan and W.H. Rhodes: Mater. Sci. Eng., 1983, 61, 59
355. F.F. Lange: in ref. 10, in press
356. W.C. Carter and R.M. Cannon: Ceram. Trans., 1990, 7, 137
357. W.C. Carter and R.M. Cannon: J. Am. Ceram. Soc., 1989, 72, 1550
358. G.Y. Onoda and J. Toner: J. Am. Ceram. Soc., 1986, 69, C-278
359. L.S. Edelson and A.M. Glaeser: J. Am. Ceram. Soc., 1988, 71, 225
360. E.G. Sizgek, J.R. Bartlett, J.L. Woolfrey and E.R. Vance: Mater. Res. Soc. Symp. Proc., 1994, 333, 305
361. M.W.A. Stewart: in Proceedings of the International Ceramics Conference, Austceram 94, Sydney, Aust., 25-27 July 1994, C.C. Sorrell and A.J. Ruys, eds., Aust. Ceram. Soc., Intnl. Ceram. Monographs, 1994, 1, 301
362. T.A. Ring: in ref. 2, 681
363. J. Nowotny: in Science of Ceramic Interfaces, J. Nowotny, ed., Mater. Sci. Monographs, 75, Elsevier Science Pub., London, 1991, 79
364. M.F. Ashby: Powd. Met., 1991, 49, 144
365. E. Artz, M.F. Ashby and K.E. Easterling: Met. Trans. A, 1983, 14A, 211
366. A.S. Helle, K.E. Easterling and M.F. Ashby: Acta Met., 1985, 33, 2136
367. M.P. Harmer: in ref. 10, in press
368. Z.S. Nickolic, R.M. Spriggs and M.M. Ristic: in ref. 11, 1995, 15 and 30
369. T.E. Clare: J. Am. Ceram. Soc., 1966, , 49, 159
370. M.J. Bannister: J. Nucl. Mater., 1964, 14, 315
371. K.D. Reeve: Ceramurgia Intnl., 1975, 1, 59
372. K. H. Jack: J. Mater. Sci. 1976, 11, 1135
373. D.S. Perera, M.W.A. Stewart, S. Moricca and R. L. Jeffries: in Proceedings of the International Ceramics Conference, Austceram 94, Sydney, Aust., 25-27 July 1994, C.C. Sorrell and A.J. Ruys, eds., Aust. Ceram. Soc., Intnl. Ceram. Monographs, 1994, 1, 310
374. W.D. Kingery: in ref. 11, 3
375. M.L. Huckabee and H. Palmour III: Am. Ceram. Soc. Bull., 1972, 51, 574
376. M.L. Carter, D.J. Cassidy, J.L. Woolfrey and J.R. Bartlett: in ref 17, 310
377. M. Kramer: J. Mat. Sci. Lett., 1995, 14, 778
378. G. Gazza: in ASM Engineered Materials Handbook Vol. 4: Ceramics and Glasses, ASM, Washington D.C, USA, 1992, 296.
379. L. Ramquist: Powd. Met., 1966, 9, 1
380. T. Vasilos and R.M. Spriggs: in Progress in Ceramic Science Vol. 4, J. E. Burke, ed., Pergamon Press, New York, 1966, 95.
381. R.M. Spriggs and S.K. Dutta: in ref. 23: 1973, 369.
382. M.R. Notis and R.M. Spriggs: Sci. of Sint., 1973, 10 175.
383. H. Pastor: Rev. Int. Hautes Temper. et Refract., 1972, 9 251.
384. R. Pampuch: Ceramurrgia Intnl., 1979, 5, 76.
385. M.P. Harmer: in Encyclopaedia of Materials Science and Engineering, M.B. Bever, ed., Pergamon Press, Oxford, 1986, 2206.
386. P. Murray, E.P. Rodgers and A.E. Williams:, Trans. Brit. Ceram. Soc., 1954, 53, 474.
387. P. Murray, D.T. Livey and J. Williams: in Ceramic Fabrication Processes, W.D. Kingery, ed., MIT Press, Cambridge, MA, USA, 1958, 147.
388. H.V. Atkinson and B.A. Rickinson: Hot Isostatic Pressing, Adam Hilger, Bristol, UK, 1991
389. M. Koizumi and M. Nishihara (eds.): Isostatic Pressing - Technology and Applications, Elsevier Science Pub., London, 1991
390. D.S. Perera: Metals, 1991, 37, 35
391. L.M. Sheppard: Am. Ceram. Soc. Bull., 1992, 71, 323
392. K. Uehara, T. Ishii, Y. Inoue and T. Fujikawa: in HIP' 93 Proc. Intnl. Conf. on Hot Isostatic Pressing,Antwerp, Belgium, 21-23 April 1993, L. Delaey and H. Tas, eds., Elsevier Science Pub., Amsterdam, 1994, 481
393. J. Drennan, D.S. Perera, S. Moricca, Q.S. Fan and P.Z. Gu: 5th International Symposium on Ceramic Materials and Components for Engines, Shanghai, China, 29 May-1 June 1994, D.S. Yan, X.R. Fu and S.X. Shi eds., World Scientific, Singapore, 1995, 298
394. D.S. Perera, G. Stevens, S. Leung and C. Gomez: J. Aust. Ceram. Soc., 1994, 30, 1
395. T. Kito, K. Yabuta, M. Watanabe and Y. Matsuo: in Proc. Second International Conference on Hot Isostatic Pressing: Theory and Applications, Gaithersburg, ML, USA, 7-9 June 1989, R.J. Schaefer and M. Linzer, eds., ASM International, OH, USA, 1991, 155
396. A. Kele, P. Arato, E. Besenyei, J. Labar and F. Weber: in Hot Isostatic Pressing, Theory and Applications, (proc. conf.) 10-14 June 1991, M. Koizumi, ed., Elsevier Science Pub., England, 85
397. D.S. Perera, J. Drennan, S. Moricca, Q.S Fan and P.Z. Gu: in HIP-96 International Conference on Hot Isostatic Pressing, 20-22 May 1996 F. H. Froes, ed., 121-126
398. D.S. Perera, J. Drennan, S. Moricca, Q.S Fan, Y. He, W. Ding, M.W.A. Stewart: in ref. 11, 337
399. T. Izaki, A. Watanabe, H. Haneda, Y. Uchida, J. Tanaka and S. Shirasaki: in ref. 388, 459
400. D.S. Perera, X.S. Li, I.M. Low and S. Moricca: in ref. 245, 424
401. A. Kujukevics and K. Ishizaki: in Pressure Effects on Materials Processing and Design, Materials Research Society Symposium Proceedings, K. Ishizaki, E. Hodge, M. Concannon, eds., 1991, 251, 121
402. N. Saito, K. Ishizaki and A. Kujukevics: ibid., 149
403. D.S. Perera, R.L. Jeffries, S. Moricca and L.J. Wells: in Ceramics Adding the Value, Proc. Austceram 92, (proc. conf.) Melbourne, Aust., 16-21 Aug. 1992, M.J. Bannister, ed., Aust. Ceram. Soc., CSIRO Pub., 1992, 412
404. K. Sugunama, T. Okamoto, M. Shimada and M. Koizumi : J. Am. Ceram. Soc., 1983, 66, C-117
405. C.H. Bates, M.R. Foley, G.A. Rossi, G.J. Sundberg and F.J. Wu: J. Am. Ceram. Soc. Bull., 1990, 69, 350
406. H. Kuribashi, K. Sugunama, Y. Miyamoto and M. Koizumi: Am. Ceram. Soc. Bull., 1986, 65, 1306
407. W.H. Sutton: Mater. Res. Soc. Symp. Proc., 1992, 269, 3
408. G.N. Eshani, A.J. Ruys and C.C. Sorrell: in ref. 17, 714
409. S.A. Nightingale, R.H.J. Hanink and S. Street: Science and Technology of Zirconia Ceramics V, (conf. proc.), Melbourne, Aust., 16-21 Aug. 1992, S.P.S. Badwal, M.J. Bannisterand R.H.J. Hannink, eds., Technomic, USA, 1993, 299
410. J. Subramaniam, and M. Vijayakumar: J. Mater. Sci.,1992, 27, 6249
411. A.G. Merzhanov: in Combustion and Plasma Synthesis of High Temperature Materials, (proc. conf.), 23-26 October, 1988, Z.A. Munir and J.B. Holt, eds., VCH Publishers, New York, 1990, 1
412. P.D. Zavitsanos, J.J. Gebhardt and A. Gatti: ibid., 170
413. A. Niiler, L.J. Kecskes and T. Kttke: ibid., 309
414. A.G. Merzhanov: in Ceramics: Towards the 21st Century, Centennnial International Symposium, N. Soga and A. Kato, eds., Ceram. Soc. Jpn., Tokyo, Japan, 1991, 378
415. Y. Miyamoto and M. Koizumi: in ref. 407, 163
416. R.W. Rice: in ref., 303
417. E.L Kemer and D.L Johnson: Am. Ceram. Soc. Bull., 1985, 64, 1132
418. P.C. Kong: High Temperature Developments, 1991, 161, ASME, USA, 9
419. S.M. Knittel and S.H. Risbud: in ref. 407, 414
420. M. Tokita: J. Soc. Powd. Tech. Jpn., 1994, 30, 790
421. M. Omori, H. Sakai, T. Hirai, M. Kawahara and M. Tokita: 3rd International Symposium on Structural and Functionally Gradient Materials, FGM '94, Lausanne, Switzerland, 10-12 Oct., B. Ilschner and N. Cherradi, eds., Presses Polytechniques et Universitaires Romandes, Lausanne, Switzerland, 1995, 71
422. M. Omori, H. Sakai, A. Okubo and T. Hirai: ibid., 667
423. R.L Coble: in ref. 17, 145.
424. G.C. Kuczynski: in ref. 18, 245.
425. H. Palmour III, T.M. Hare, A.D. Batchelor, K.Y. Kim, K.L. More and T.T. Fang: Adv. in Ceram., 1984, 10, 506.