Measurement of friction under sheet forming conditions

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 27, Issue 12, 1996, Pages 3971-3981

  Wang, W ^a,c   Wagoner, R H ^b   Wang, X J ^a  

^a Ohio State University   (United States)

^b Global Research and Development   (United States)

^c UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING   (China)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM; BENDING (DEFORMATION); BRASS; CONTACT ANGLE; FRICTION; GALVANIZED METAL; METAL FORMING; STEEL; STRAIN RATE; TENSILE TESTING;

BENDING UNDER TENSION (BUT) TESTS; INTERSTITIAL FREE (IF) STEEL; PUNCH SPEED;

SHEET METAL;

EID: 0030402313     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02595646     Document Type: Article

References (50)

1. J. Reissner: Proc. 13th IDDRG, 1984, pp. 456-66.
2. J. Reissner and W. Schmid: Proc. 14th IDDRG, 1986, pp. 329-40.
3. C.Y. Sa: SAE Technical Paper No. 890346, SAE, Warrendale, PA, 1989.
4. D.A. Burford, K. Narasimhan, and R.H. Wagoner: Metall. Trans. A, 1991, vol. 22A, pp. 1775-88.
5. R.P. Maisch, B. Meier, and J. Reissner: in Numerical Methods in Industrial Forming Processes, J.L. Chenot, R.D. Wood, and O.C. Zienkiewicz, eds., A.A. Balkema, Rotterdam, Netherlands, 1992, pp. 163-68.
6. J.R. Knibloe and R.H. Wagoner: Metall. Trans. A, 1989, vol. 20A, pp. 1509-21.
7. E. Bochmann and E. Doege: in Numerical Methods in Industrial Forming Processes, J.L. Chenot, R.D. Wood, and O.C. Zienkiewicz, eds., A.A. Balkema, Rotterdam, Netherlands, 1992, pp. 415-20.
8. M.J. Saran and R.H. Wagoner: J. App. Mech., 1991, vol. 113, pp. 499-512.
9. R.H. Wagoner, S. Latreille, J.L. Sues, and Y.H. Kim: Metall. Trans. A, 1991, vol. 22A, pp. 3003-11.
10. B.B. Yoon, R.S. Rao, and N. Kikuchi: Trans. NAMRC, 1988, pp. 159-63.
11. M.L. Wenner: J. Appl. Metalworking, 1983, vol. 2, pp. 277-87.
12. N.M. Wang: J. Appl. Metalworking, 1982, vol. 2, pp. 193-99.
13. H.D. Nine: J. Appl. Metalworking, 1982, vol. 2, pp. 200-10.
14. H.D. Nine: in Mechanics of Sheet Metal Fanning-Materials Behavior and Deformation Analysis, O.P. Koistinen and N.M. Wang, eds., Plenum, New York, NY, 1978, pp. 179-211.
15. B.S. Levy: J. Appl. Metalworking, 1983, vol. 3, pp. 38-44.
16. T.B. Stoughton: Proc. 15th IDDRG, 1988, pp. 205-15.
17. W.F. Hosford and R.M. Caddell: Metal Forming: Mechanics and Metallurgy, Prentice-Hall, Englewood Cliffs, NJ, 1983, p. 276.
18. E. Orowan: Proc. Int. Mech. Eng., 1991, vol. 150, pp. 140-67.
19. M.C. Shaw, A. Ber, and P.A. Mamen: J. Basic Eng., 1960, vol. 82, pp. 342-59.
20. T. Wanhein and N. Bay: CIRP, 1976, vol. 27, pp. 189-201.
21. B. Avitzur: Int. Symp. Math. Modelling Hot Rolling Steel, ed. S. Yue, Can. Inst. Min. Metall., Hamilton, Ontario, Canada, 1990, pp. 300-27.
22. D.A. Korzekwa, P.R. Dawson, and W.R.D. Wilson: Int. J. Mech. Sci., 1992, vol. 34, pp. 521-39.
23. B. Avitzur, C.K. Huang, and Y.D. Zhu: Wear, 1984, vol. 95, pp. 59-77.
24. B. Avitzur and Y.D. Zhu: Trans. NAMRC, 1985, pp. 103-09.
25. W.R.D. Wilson, H. Malkani, and P. Saha: Trans. NAMRC, 1991, pp. 37-42.
26. J.A. Schey: Tribology in Metal Working, ASM, Metals Park, OH, 1983, p. 197.
27. X.J. Wang, D.F. Jonason, and J.L. Duncan: Proc 14th IDDRG, 1986, pp. 201-17.
28. W.J. Wojtowicz: Lubrication Eng., 1955, May-June, pp. 174-77.
29. M. Ejima, Y. Tokunaga, and T. Honda: Proc 13th IDDRG, 1982, pp. 317-28.
30. A.K. Ghosh: Int. J. Mech. Sei., 1977, vol. 19, pp. 457-70.
31. H.D. Nine: in Novel Techniques in Metal Deformation Testing, R.H. Wagoner, ed., AIME, New York, NY, 1983, pp. 31-64.
32. M. Littlewood and J.F. Wallace: Sheet Metal Ind., 1964, Dec., pp. 925-30.
33. J.L. Duncan, B.S. Shabel, and J.G. Filho: SAE Technical Paper No. 780391, SAE, Warrendale, PA 1978, p. 8.
34. X.J. Wang, J.L. Duncan, and M.L. Devenpeck: J. Appl. Metalworking, 1983, vol. 3, pp. 3-11.
35. C.H. Lee, H.B. Shim, and D.Y. Yang: Proc. 6th Int. Congr. Exp. Mech., 1988, pp. 71-76.
36. R.J.J.M. Sniekers and J.A.H. Ramaekers: Proc. 4th ICTP, 1993, pp. 1717-21.
37. G.J. Wenzloff, T.A. Hylton, and O.K. Matlock: J. Maler. Eng. Perf., 1992, vol. 1, pp. 609-14.
38. W. Wang: Ph.D. Dissertation, The Ohio State University, Columbus, OH, 1994.
39. A. Higdon and W.B. Stiles: Engineering Mechanics, 2nd ed., Prentice-Hall Inc., New York, NY, 1955.
40. R. Zheng and D. Overby: Proc. 15th IDDRG, 1988, pp. 85-90.
41. S.R. Bhonsle and K.J. Weinmann: Trans. NAMRI, 1990, pp. 46-51.
42. H.H. Hollomon: Trans. AIME, 1945, vol. 162, pp. 268-290.
43. H.W. Swift: J. Mech. Phy. Solids, 1952, vol. 1, pp. 1-18.
44. E. Voce: J. Inst. Met., 1948, vol. 74, pp. 537-62.
45. P. Ludwik: Elem. Technol. Mech., Julius Spring, Berlin, 1909.
46. M.S. Caceci and W.P. Cacheris: Byte, 1984, May, pp. 340-42.
47. B.T. Meier and J. Reissner: Proc. 16th IDDRG, 1990, pp. 43-52.
48. M. Sulonen, P. Eskola, J. Kumpulainen, and A. Ranta-Eskola: IDDRG WG Meeting, Tokyo, 1981.
49. E. Schedin, K. Fredriksson, and C. Gustafsson: Proc. 15th IDDRG, 1988, pp. 55-61.
50. Z. Deng, X.J. Wang, and J.N. Cai: Proc. 4th ICTP, 1993, pp. 1788-92.