OPPS-ROT: An optimised process planning system for rotational parts

Computers in Industry

Volumn 32, Issue 2, 1996, Pages 181-195

  Kayacan, M Cengis ^a,b   Filiz, I Hüseyin ^a   Sonmez A I ^a   Baykasoǧlu, Adil ^a   Dereli, Türkay ^a  

^a GAZIANTEP UNIVERSITY   (Turkey)

^b SULEYMAN DEMIREL UNIVERSITY   (Turkey)

Author keywords

CAPP; Cutting conditions; Optimisation; Sequence of operations

Indexed keywords

CODES (SYMBOLS); COMPONENTS; COMPUTER AIDED DESIGN; COMPUTER AIDED MANUFACTURING; COMPUTER SIMULATION; CUTTING; GRAPHIC METHODS; KNOWLEDGE BASED SYSTEMS; MACHINING; OBJECT RECOGNITION; OPTIMIZATION; TOPOLOGY;

COMPUTER AIDED PROCESS PLANNING; GRAPHICAL SIMULATION; ROTATIONAL PARTS; SEQUENCE OF OPERATION; SEQUENTIAL OPERATION PLANNING;

PLANNING;

EID: 0030399497     PISSN: 01663615     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0166-3615(96)00061-9     Document Type: Article

References (45)

1. B.L. Furth, "Automated process planning", NATO Advanced Study Series Computer Aided Manufacturing, Vol. F49, 1988, pp. 37-53.
2. D. Kochan, J. Samish and J. Hartmann, "An integrated CAD/CAM system for rotational parts including a technological high capacity programming system", IFIP Conference on Software for Discrete Manufacturing, Elsevier Science Publishers, North-Holland, 1986.
3. K.K. Cho, S.H. Lee and J.H. Ahn, "Development of international process planning and manufacturing system for turning operations", Annals of the CIRP, Vol. 40, No. 1, 1991, pp. 423-427.
4. C.S. Chen, "Development of a feature based knowledge base system for CAD/CAM integration", Computers and Industrial Engineering, Vol. 15, No. 1-4, 1988, pp. 34-40.
5. T. Gupta, "An expert system approach in process planning: Current development and its feature", Computers and Industrial Engineering, Vol. 18, No. 1, 1990, pp. 69-80.
6. T.C. Chang, An Introduction to Automated Process Planning System, Prentice-Hall, Inc., Englewood Cliffs. New Jersey, 1985.
7. S. Hinduja and H. Huang, "OP_PLAN: An automated operation planning system for turning components", Proceedings of the Institution of Mechanical Engineers, Vol. 203, 1989, pp. 145-158.
8. W. Lewis and E. Bartlef, "Tool oriented automatic process planning", 23rd International MATADOR Conference, Manchester, 1982.
9. H.M. Rho, R. Geelink, A.H. van 't Erve and H.J.J. Kals, "An integrated cutting tool selection and operation sequencing method", Annals of the CIRP, Vol. 41, No. 1, 1992, pp. 517-520.
10. P. Maropoulos, "Automatic tool selection and balancing for CNC turning centres", Ph.D. Thesis, UMIST, 1988.
11. A.W.S. Lai, "SITS: A semi-intelligent tool selection system for turned components", M.Sc. Thesis, UMIST, 1989.
12. P.G. Maropoulos and S. Hinduja, "Automatic tool selection for rough turning", International Journal of Production Research, Vol. 29, No. 6, 1991, pp. 1185-1204.
13. S. Hinduja and G. Barrow, "SITS - A semi-intelligent tool selection system for turned components", Annals of the CIRP, Vol. 42, No. 1, 1993.
14. P.G. Maropoulos and S. Hinduja, "Automatic tool selection for finish turning", Proceedings of the Institution of Mechanical Engineers, Vol. 204, 1990, pp. 43-51.
15. P.G. Maropoulos, "Cutting tool selection: An intelligent methodology and its interfaces with technical and planning functions", Proceedings of the Institution of Mechanical Engineers, Vol. 206, 1992, pp. 49-60.
16. D. Domazet, "The automatic tool selection with the production rule matrix method", Annals of the CIRP, Vol. 39, No. 1, 1990, pp. 497-500.
17. D.L.K. Lim, "Tool selection for turning components", M.Sc. Thesis, Manufacturing and Machine Tool Division, Department of Mechanical Engineering UMIST, 1991.
18. C. Zhou and R.A. Wysk, "An integrated system for selecting optimum cutting appends and tool replacement times", International Journal of Machine Tools Manufacturing, Vol. 32, No. 5, 1992, pp. 695-707.
19. H.J.J. Kals, J.A.W. Hijink and A.C.H. van der Wolf, "A computer aid in the optimization of turning conditions in multi-cut operations", Annals of the CIRP, Vol. 27, No. 1, 1978, pp. 465-469.
20. J.S. Agapiou, "The optimisation of machining operations based on a combined criterion, Part 2: Multipass operations", Transaction of the ASME, Vol. 114, 1992, pp. 508-513.
21. J. Somlo and J. Nagy, "A new approach to cutting data optimization", Advances in Computer-Aided Manufacture, North-Holland, 1977.
22. M.P. Groover, "Monte Carlo simulation of the machining economics problem", Transaction of the ASME, Vol. 97, 1975, pp. 931-938.
23. M.A. El Hakim et al., "A computer program for the optimization of the machining variables", Computers and Industrial Engineering, Vol. 7, 1983, pp. 317-336.
24. R.C. Brewer, "On the economics of basic turning operations", Transaction of the ASME, Vol. 80, 1958, pp. 1498-1958.
25. F.J.A.M. van Houten et al., "The development of a technological processor as a workpiece programming system", Annals of the CIRP, Vol. 30, 1981, pp. 363-368.
26. V.A. Tipnis and M.Y. Friedman, "Cutting rate-tool life characteristic functions for material removal processes, Part 1: Theory", Transaction of the ASME, Vol. 75, 1976, pp. 481-486.
27. V.A. Tipnis and M.Y. Friedman, "Cutting rate-tool life characteristic functions for material removal processes. Part 2: Verification and applications", Transaction of the ASME, Vol. 75, 1976, pp. 487-495.
28. S. Hinduja, D.J. Petty, M. Tester and G, Barrow, "Calculation of optimum cutting conditions for turning operations", Proceedings of the Institution of Mechanical Engineers, Vol. 199, No. 82, 1985, pp. 81-92.
29. J.A. Arsecularatne, S. Hinduja and G. Barrow, "Optimum cutting conditions for turned components", Proceedings of the Institution of Mechanical Engineers, Vol. 206, 1992, pp. 15-30.
30. H.P. Wang and R.A. Wysk, "Intelligent reasoning for process planning", Computers in Industry, No. 8, 1987, pp. 293-309.
31. A.T. Joseph, M. Kalta and B.J. Davies, "Automatic generation of NC programs for turned components from CAD product models", Proceedings of the 28th International MATADOR Conference, Manchester, April 18-19, 1990, pp. 289-294.
32. S.C. Chin, "Developing a feature based knowledge system for CAD/CAM integration", Computers and Industrial Engineering, Vol. 15, No. 1-4, 1988, pp. 34-40.
33. M.E. Ssemakula, "Process planning system in the CIM environment", Computers and Industrial Engineering, Vol. 19, No. 1-4, 1990, pp. 452-456.
34. C.R. Boer, M. Petitti and F. Lombardi, "A CAPP/CAM expert system for a high productivity, high flexibility CNC turning center", Annals of the CIRP, Vol. 39, No. 1, 1991, pp. 481-483.
35. W.A. Hunt and H.B. Voelcker, "An exploratory study of automatic verification of programs for numerically controlled machine tools", Tech. Memo 34, Production Automation Project, University of Rochester, January 1982.
36. T. Fujii and R.E. Specken, "Computer graphics: A way of teaching CNC programming with or without machine tools", ASEE/EDGD Midyear Meeting, West Lafayette, Indiana, November 24-26, 1985.
37. S.H. Yeo, "Knowledge-based feature recognizer for machining", Computer Integrated Manufacturing System, Vol. 7, No. 1, 1994, pp. 29-37.
38. I.H. Filiz, M.C, Kayacan and T. Dereli, "ROMOD: A product modelling system for rotational parts", Proceedings of 6th International Conference on Machine Design and Production Conference, METU, Turkey, pp. 271-279.
39. I.H. Filiz, T. Dereli and M.C. Kayacan, "Automatic generation of CNC part programs for rotational parts", Proceedings of 6th International Conference on Machine Design and Production Conference, METU, Turkey, pp. 281-290.
40. I.H. Filiz and G. Gorur, "Analysis of preloaded bearings under combined axial and radial loadings", International Journal of Machine Tools and Manufacturing, Vol. 34, No. 1, 1994, pp. 1-11.
41. M.J. Kalajdzic and V.B. Solaja, "Rotational speed limits for basic types of chucks", Annals of the CIRP, Vol. 28, No. 1, 1979, pp. 297-301.
42. A. Baykasoǧlu, "Computer aided optimisation of cutting conditions in multicut turning operations", M.Sc. Thesis, University of Gaziantep, 1995.
43. SANDVIK Coromant-Turning Tools, Metalworking Products 93/94, AB Sandvik Coromant, S-811 81 Sandviken, Sweden.
44. O.W. Boston, Metal Processing, John Wiley and Sons, Inc.
45. HERTEL Cutting Tool Systems For Turning, Hertel AG, 1993.