Measurements of mean flow and eddy transport over a film cooling surface

American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD

Volumn 327, Issue , 1996, Pages 71-79

  Wang, Ling ^a   Tsang, Henry ^a   Simon, Terrence W ^a   Eckert, Ernst R G ^a  

^a UNIVERSITY OF MINNESOTA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANISOTROPY; COOLING; SURFACES; TUBES (COMPONENTS); TURBULENCE; TURBULENT FLOW; VELOCITY;

EDDY TRANSPORT; FILM COOLING; FREESTREAM TURBULENCE INTENSITY; MEAN FLOW;

HEAT TRANSFER;

EID: 0030398912     PISSN: 02725673     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (25)

1. Ames, F.E., 1994, "Experimental study of vane heat transfer and aerodynamics at elevated level of turbulence", NASA contractor report, CR-4633.
2. Bergeles, G., Gosman, A.D., and Launder, B.E., 1976, "The prediction of three-dimensional discrete-hole cooling processes, Part 1 - Laminar flow," ASME J. Heat Transfer, Vol.98, No. 3, p.379.
3. Bergeles, G., Gosman, A.D., and Launder, B.E., 1978, "The turbulent jet in a cross stream at low injection rates: A three dimensional numerical treatment," Num. Heat Transfer, Vol.1, p. 217.
4. Bons, J.P., MacArthur, C.D., and Rivir, R.B., 1994, "The effect of high freestream turbulence of film cooling effectiveness," ASME paper 94-GT-51.
5. Cho, H.H. and Goldstein R.J., 1995a, "Heat (mass) transfer and film cooling effectiveness with injection through discrete holes. Part I: with holes and on the back surface." ASME J. of Turbomachinery, vol. 117, pp. 440-450.
6. Cho, H.H. and Goldstein R.J., 1995b, "Heat (mass) transfer and film cooling effectiveness with injection through discrete holes. Part II: on the exposed surface," ASME J. of Turbomachinery, vol. 117, pp. 451-460.
7. Demuren, A.O. and Rodi, W., 1983, "Three-dimensional calculation of film cooling by a row of jets," Notes Num. Ru. Mech., Vol.7, p.49.
8. Demuren, A.O., Rodi, W., and Schonung, B., 1986, "Systematic study of film cooling with a three-dimensional calculation procedure, " ASME J. of Turbomachinery, vol. 108, p. 124
9. Goldstein, R.J., 1971, "Film cooling," Advances in Heat Transfer, Vol. 7, Academic Press, p.321-379
10. Goldstein, R. J., and Eckert, E. R. G., Burggarf, F., 1974, "Effects of hole geometry and density on three-dimensional film cooling," Int. J. Heat Mass transfer, vol. 17, p. 595.
11. Goebel, S. G., Abuaf, N., Lovett, J. A., and Lee, C.-P., 1993, "Measurements of Combustor Velocity and Turbulence Profiles," ASME Paper 93-GT-228.
12. Jubran, B. and Brown, A., 1985, "Film cooling from two rows of holes inclined in the streamwise and spanwise directions," ASME J. of Engineering for Gas Turbine and Power, Vol. 107, p. 84.
13. Kline, S. J., and McClintock, S. J., 1953," Describing uncertainties in single-sample experiments,"Mechanical Engineering. Jan.
14. Kohli, A. and Bogard, D.G., 1995, "Adiabatic effectiveness, thermal fields, and velocity fields for film cooling with large angle injection," ASME paper 95-GT-219.
15. Laufer, 1953," The structure of turbulence in fully developed pipe flow," NACA report 1174.
16. Leylek J.H. and Zerkle R.D., 1994, "Discrete-jet film cooling: A comparison of computational results with experiments," ASME J. of Turbomachinery, vol. 116, p. 358.
17. Patankar, S.V. and Spalding, D.B., 1972, "A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows," Int. J. Heat Mass Transfer, Vol. 15. p. 1787.
18. Patankar, S.V., Rastogi, A.K. and Whitelaw, J.H., 1973, "The effectiveness of three-dimensional film-cooling slots - II. Predictions," Int J. Heat Mass Transfer, Vol. 16, p. 1673.
19. Pratap, V.S., and Spalding, D.B., 1976, "Fluid flow and heat transfer in three-dimensional duct flows," Int. J. Heat Mass Transfer, Vol. 19, p. 1183.
20. Quarmby A. and Quirk R., 1972, "Measurements of the radial and tangential eddy diffusivities of heat and mass in turbulent flow in a plain tube," Int, J. Heat Mass Transfer, Vol. 15, p. 2309.
21. Rodi, W. and Srivatsa, S.K., 1980, "A locally elliptic calculation procedure for three-dimensional flows and its application to a jet in cross-flow," Comp. Mech. App. Mech. Eng., Vol. 23. p. 67.
22. Sathyamurthy, P. and Patankar, S.V., 1990, "Prediction of film-cooling with lateral injection," Heat Transfer in Turbulence Flows, ASME-HTD, Vol. 138. p. 61.
23. Schmidt, D.L., Sen, B., and Bogard, D.G., 1994, "Film cooling with compound angle holes: Adiabatic effectiveness." ASME paper 94-GT-312.
24. Schmidt, D.L. and Bogard, D.G., 1995, "Pressure gradient effects on film cooling," ASME paper 95-GT-18
25. Yavuzkurt, S., 1984, "A guide to uncertainly analysis of hot-wire data," J. Fluids Engineering, June, vol. 106, p. 181.