Sustained mode I and mode II fatigue crack growth in flat plates

Engineering Fracture Mechanics

Volumn 55, Issue 6, 1996, Pages 883-899

  Magill, M A ^a   Zwerneman, F J ^b  

^a PURDUE UNIVERSITY   (United States)

^b Oklahoma State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CALCULATIONS; FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; LOADS (FORCES); MATHEMATICAL MODELS; OFFSHORE STRUCTURES; PLATES (STRUCTURAL COMPONENTS); STRESS INTENSITY FACTORS;

FATIGUE LOADING; FLAT PLATES;

CRACK PROPAGATION;

EID: 0030380569     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0013-7944(96)00078-1     Document Type: Article

References (54)

1. Rhee, H. C. and Kanninen, M. F., Opportunities for application of fracture mechanics for offshore structures. Appl. Mech. Rev., 1988, 41(2), 23-35.
2. Pook, L. P., Kam, J. C. P. and Mshana, Y., On mixed mode fatigue crack growth in tubular welded joints. Proceedings, International Conference on Offshore Mechanics and Arctic Engineering, The Hague, Netherlands. Vol. III-B, 1992, pp. 251-256.
3. Broek, D. and Rice, R. C., Fatigue crack growth properties of rail steels. Battelle Report to DOT/TC, 1976.
4. Baloch, R. A. and Brown, M. W., The effect of pre-cracking history on branch crack threshold under mixed mode I/II loading. Fatigue Under Biaxial and Multiaxial Loading, ESIS10, Mechanical Engineering Publications, London, 1991, pp. 179-197.
5. Zamrik, S. Y., Seibi, A. and Davis, D. C., Fatigue crack initiation from an induced angled surface crack under biaxial anticlastic bending. Fatigue Under Biaxial and Multiaxial Loading, ESIS10, ed. K. Dussmaul, D. McDiarmid, and D. Socie. Mechanical Engineering Publications, London, 1991, pp. 223-238.
6. Erdogan, F. and Sih, G. C., On the crack extension in plates under plane loading and transverse shear. J. bas. Engng, Trans. ASME, 1963, 519-527.
7. Ewing, P. D. and Williams, J. G., The fracture of spherical shells under pressure and circular tubes with angled cracks in torsion. Int. J. Fracture, 1974, 10(4), 537-543.
8. Hojfeldt, E. and Ostervig, C. B., Fatigue crack propagation in shafts with shoulder fillets. Engng Fracture Mech., 1986, 25(4), 421-427.
9. Hua, G., Mixed-mode fatigue thresholds. Fatigue Engng Mater. Structures, 1982, 5(1), 1-17.
10. Iida, S. and Kobayashi, A. S., Crack propagation rate in 7075-T6 plates under cyclic tensile and transverse shear loadings. J. bas. Engng, Trans. ASME, 1969, 764-769.
11. Linnig, W., Richard, H. A. and Henn, K., Change in the crack growth rates under mixed mode loading. Fatigue '90, Materials and Component Engineering Publications Ltd, Birmingham, 1990, pp. 573-579.
12. Miglin, M. T., Lin, I. H., Hirth, J. P. and Rosenfield, A. R., Mixed mode crack growth using the compact specimen. Fracture Mechanics: 14th Symposium - Volume II: Testing and Applications, ASTM STP 791, American Society for Testing and Materials, 1983, pp. II353-II369.
13. Nunomura, S. and Oda, Y., Cracked ring specimen for environment fatigue and mixed mode fatigue tests. Fatigue '90, Materials and Component Engineering Publications Ltd, Birmingham, 1990, pp. 589-595.
14. Pook, L. P. and Crawford, D. G., The fatigue crack direction and threshold behaviour of a medium strength structural steel under mixed mode I and III loading. Fatigue Under Biaxial and Multiaxial Loading, ESIS10, Mechanical Engineering Publications, London, 1991, pp. 199-211.
15. Pook, L. P. and Crawford, D. G., Stress intensity factors for twist cracks. Int. J. Fracture, 1990, 42, R27-R32.
16. Pook, L. P., The significance of mode I branch cracks for mixed mode fatigue crack growth threshold behaviour. Biaxial and Multiaxial Fatigue, EGF3, Mechanical Engineering Publications, London, 1989, pp. 247-263.
17. Pook, L. P., Comments on fatigue crack growth under mixed modes I and III and pure mode III loading. Multiaxial Fatigue, ASTM STP 853, American Society for Testing and Materials, Philadelphia, 1985, pp. 249-263.
18. Pook, L. P., A failure mechanism map for mixed mode I and II Fatigue crack growth thresholds. Int. J. Fracture, 1985, 28, R21-R23.
19. Pook, L. P., The fatigue crack direction and threshold behaviour of mild steel under mixed mode I and III loading. Int. J. Fatigue, 1985, 7(1), 21-30.
20. Pook, L. P., The effect of crack angle on fracture toughness. Engng Fracture Mech., 1971, 3, 205-218.
21. Richard, H. A., Fracture predictions for cracks exposed to superimposed normal and shear stresses. VDI-Forschungsheft 631, VDI-Verlag, Dusseldorf, 1985.
22. Sehitoglu, H., Socie, D. F. and Worthem, D., Crack growth studies in biaxial fatigue. Basic Questions in Fatigue: Volume I, ASTM STP 924, ed. J. T. Fong and R. J. Fields. American Society for Testing and Materials, Philadelphia, 1988, pp. 120-135.
23. Shah, R. C., Fracture under combined modes in 4340 steel. Fracture Analysis, ASTM STP 560, 1974, 29-52.
24. Shields, E. B., Srivatsan, T. S. and Padovan, J., Analytical methods for evaluation of stress intensity factors and fatigue crack growth. Engng Fracture Mech., 1992, 42(1), 1-26.
25. Tschegg, E. K., Mayer, H. R., Czegley, M. and Stanzl, S. E., Influence of a constant mode III load on mode I fatigue crack growth thresholds. Fatigue Under Biaxial and Multiaxial Loading, ESIS10, Mechanical Engineering Publications, London, 1991, pp. 213-222.
26. Tschegg, E. K. and Stanzl, S. E., Fatigue crack propagation measurements under rotating-bending loading. Fatigue '90, Materials and Component Engineering Publications Ltd, Birmingham, 1990, pp. 1217-1222.
27. Tschegg, E. K. and Stanzl, S. E., The significance of sliding mode crack closure on mode III fatigue crack growth. Basic Questions in Fatigue: Volume I, ASTM STP 924, ed. J. T. Fong and R. J. Fields. American Society for Testing and Materials, Philadelphia, 1988, pp. 214-232.
28. Tschegg, E. K., Mode III and mode I fatigue crack propagation behaviour under torsional loading. J. Mater. Sci., 1983, 18, 1604-1614.
29. Tschegg, E. K., The influence of the static I load mode and R ratio on mode III fatigue crack growth behaviour in mild steel. Mater. Sci. Engng, 1983, 59, 127-137.
30. Tschegg, E. K., A contribution to mode III fatigue crack propagation. Mater. Sci. Engng, 1982, 54, 127-136.
31. Rhee, H. C. and Salama, M. M., On the evaluation of stress intensity factor for tubular joint fatigue study. OTC Paper 4998, 17th Annual Offshore Technology Conference, Texas, May 1985.
32. Rhee, H. C., The behavior of stress intensity factors of weld toe surface flaw of tubular X-joints. OTC Paper 5136, 18th Annual Offshore Technology Conference, Texas, May 1986.
33. Rhee, H. C. and Tyson, J. A., Fatigue life calculation for offshore structural tubular joint using fracture mechanics crack growth analysis. No. 5557, Offshore Technology Conference, 1987, pp. 65-75.
34. Rhee, H. C., Fatigue crack growth analyses of offshore structural tubular joint. J. Offshore Mechanics and Arctic Engineering. Trans. ASME, 1989, 111, 49-55.
35. Rhee, H. C., Han, S. and Gipson, G. S., Reliability of solution method and empirical formulas of stress intensity factors for weld toe cracks of tubular joints materials engineering. Proc. Conf. Offshore Mechanics and Arctic Engineering, 1991, III(B), 441-452.
36. Han, S. and Zwerneman, F., Fracture mechanics investigation of tubular joint weld toe cracks through 3-D finite element analysis. Phase I Report to Joint Industry Project, July 1993.
37. Bowness, D. and Lee, M. M. K., Crack curvature under the weld toe in a tubular joint: a three-dimensional numerical investigation. Proc. Fourth (1994) International Offshore and Polar Engineering Conference, Osaka, Japan, Vol. IV, 10-15 April 1994, pp. 664-669.
38. Bowness, D. and Lee, M. M. K., Fatigue crack curvature under the weld toe in a tubular joint. University College of Swansea, Wales, UK. Presented to 6th Tubular Joint Conference, Melbourne, Australia, December 1994.
39. Anderson, T. L., Fracture Mechanics: Fundamentals and Applications. CRC Press, 1991.
40. Barsom, J. M. and Rolfe, S. T., Fracture and Fatigue Control in Structures: Applications of Fracture Mechanics, 2nd edn. Prentice-Hall, 1987.
41. Hertzberg, R. W., Deformation and Fracture Mechanics of Engineering Materials, 3rd edn. John Wiley, 1989.
42. Paris, P. C., The Fracture Mechanics Approach to Fatigue. Fatigue-An Interdisciplinary Approach, Syracuse, N.Y., Syracuse University Press, 1964, pp. 107-130.
43. Suresh, S., Fatigue of Materials. Cambridge University Press, 1991.
44. Broek, D., Elementary Engineering Fracture Mechanics, 4th edn. Martinus Nijhoff, 1987.
45. Rhee, H. C. and Salama, M. M., Mixed-mode stress-intensity factor solutions for offshore structural tubular joints. Fracture Mechanics: Nineteenth Symposium, ASTM STP 969, ed. T. A. Cruse. American Society for Testing and Materials, Philadelphia, 1988, pp. 669-676.
46. Freitas, M. de and Carvalho, M. H., Short fatigue crack growth in mixed mode conditions in Al-Li alloy 2090. Fatigue '90, Materials and Component Engineering Publications Ltd, Birmingham, 1990, pp. 1061-1066.
47. Sih, G. C. and Barthelemy, B. M., Mixed mode fatigue crack growth predictions. Engng Fracture Mech., 1980, 13, 439-451.
48. Badaliance, R., Application of strain energy density factor to fatigue crack growth analysis. Engng Fracture Mech., 1980, 13, 657-666.
49. Tohgo, K., Otusks, A. and Yoshida, M., Fatigue behaviour of a surface crack under mixed mode loading. Fatigue '90, Materials and Component Engineering Publications Ltd, Birmingham, 1990, pp. 567-572.
50. Roberts, R. and Kibler, J. J., Mode II fatigue crack propagation. J. bas. Engng, 1971, 671-680.
51. ANSYS User's Manual Rev. 5.0, Swanson Analysis Systems, 1992.
52. Ingraffea, A. R. and Manu, C., Stress-intensity factor computation in three dimensions with quarter-point elements. Int. J. numer. Meth. Engng, 1980, 15, 1427-1445.
53. Magill, M. A. and Zwerneman, F. J., Sustained mixed mode crack growth in flat plates. Final Report to Joint Industry Project: Fracture Mechanics Investigation of Tubular Joints, Phase II, January 1995.
54. Magill, M. A., Sustained mixed mode crack growth in flat plates. Ph.D. Thesis, Oklahoma State University, Stillwater, Oklahoma, 1995.