Analysis and design of adhesively bonded modified double containment corner joints -II

Journal of Adhesion Science and Technology

Volumn 10, Issue 10, 1996, Pages 907-937

  Kemal Apalak, M ^a   Davies, R ^a   Gul Apalak, Z ^b  

^a UNIVERSITY OF BIRMINGHAM   (United Kingdom)

^b ERCIYES UNIVERSITY   (Turkey)

Author keywords

Corner joints; Double containment; Epoxy adhesive; Finite element method; Joint design; MSC NASTRAN; ; SDRC I DEAS; Steel adherends; Stiffness analysis; Stress analysis

Indexed keywords

CORNER JOINTS; DOUBLE CONTAINMENT; EPOXY ADHESIVES; FINITE ELEMENT; JOINT DESIGNS; MSC/NASTRAN; SDRC I-DEAS; STIFFNESS ANALYSIS;

ADHESIVES; BENDING MOMENTS; DESIGN; ELECTRIC ARC WELDING; FINITE ELEMENT METHOD; STIFFNESS; STRESS ANALYSIS; STRESS CONCENTRATION; ADHESION; BONDING; BOUNDARY CONDITIONS; ELASTICITY; INTERFACES (MATERIALS); PLASTIC ADHESIVES; PRESSURE EFFECTS; STRUCTURAL LOADS;

LOADING; ADHESIVE JOINTS;

ADHESIVE FREE END; ADHESIVE STRESSES; BENDING MOMENT; DOUBLE CONTAINMENT CORNER JOINTS; STEEL ADHERENDS;

EID: 0030379290     PISSN: 01694243     EISSN: 15685616     Source Type: Journal    
DOI: 10.1163/156856196X00012     Document Type: Article

References (50)

1. M. K. Apalak, R. Davies and Z. G. Apalak, J. Adhesion Sci. Technol. 9, 267-293 (1995).
2. R. Davies, M. K. Apalak and Z. G. Apalak, J. Strain Anal. 30, 91-115 (1995).
3. O. Volkersen, Luftfahrtforschung 15, 41-47 (1938).
4. M. Goland and E. Reissner, Trans. ASME, J. Appl. Mech. 11, A17-A27 (1944).
5. O. Volkersen, Constr. Met. 4, 3-13 (1965).
6. R. W. Cornell, Trans. ASME, J. Appl. Mech. 75, 355 (1953).
7. J. L. Lubkin and E. Reissner, Trans. ASME, J. Appl. Mech. 76, 1213-1221 (1956).
8. J. L. Lubkin and G. Coun, Trans. ASME, J. Appl. Mech. 77, 255-260 (1957).
9. A. S. McLaren and I. Maclnnes, Br. J. Appl. Phys. 9, 72-77 (1958).
10. C. Mylonas, Exp. Stress Anal. 12, 129-142 (1954).
11. I. Tuzi and H. Shimada, Bull. JSME 7, 263-267 (1964).
12. I. Tuzi and H. Shimada, Bull. JSME 8, 330-336 (1965).
13. L. J. Hart-Smith, Design and analysis of adhesive bonded joints, McDonncll-Douglas Co. Report No. 6059A, Long Beach, CA (1972).
14. L. J. Hart-Smith, Adhesive-bonded double-lap joints, NASA CR-112235, Langley Research Center, Hampton, VA (1973).
15. L. J. Hart-Smith, Adhesive-bonded single-lap joints, NASA CR-112236, Langley Research Center, Hampton, VA (1973).
16. L. J. Hart-Smith, Adhesive-bonded scarf and stepped-lap joints, NASA CR-112237, Langley Research Center, Hampton, VA (1973).
17. L. J. Hart-Smith, Non-classical adhesive-bonded joints in practical aerospace construction, NASA CR-112238, Langley Research Center, Hampton, VA (1973).
18. L. J. Hart-Smith, Analysis and design of advanced composite bonded joints, NASA CR-2218, Langley Research Center, Hampton, VA (1974).
19. L. J. Hart-Smith, in: Developments in Adhesives 2, A. J. Kinloch (Ed.), pp. 1-44. Elsevier Applied Science, London (1981).
20. W. J. Renton and J. R. Vinson, J. Adhesion 7, 175-193 (1975).
21. P. Grant, Strength and stress analysis of bonded joints, British Aircraft Corp. Ltd., Report 50R(P) (1976).
22. F. Thamm, J. Adhesion 7, 301-309 (1976).
23. T. Wah, Int. J. Mech. Sci. 18, 223-228 (1976).
24. T. Wah, Int. J. Solids Struct. 12, 491-500 (1976).
25. D. J. Almann, Q. J. Mech. Appl. Math. 30, 415-436 (1977).
26. I. U. Ojolvo and H. L. Eidinoff, AIAA J. 16, 204-211 (1978).
27. I. U. Ojolvo and H. L. Eidinoff, AIAA J. 18, 352 (1980).
28. F. Delale, F. Erdogan and M. N. Aydinoglu, J. Composite Mater. 15, 249-271 (1980).
29. U. Yuceoglu and D. P. Updike, J. Eng. Mech. Div. ASCE 106, EMI-15189, 37-56 (1980).
30. U. Yuceoglu and D. R Updike, J. Eng. Mech. Div. ASCE 107, EMI-16038, 55-76 (1981).
31. R. D. Adams, S. H. Chambers, R J. A. Del Strother and N. A. Peppiatt, J. Strain Anal. 8, 52-57 (1973).
32. R. D. Adams and N. A. Peppiatt, J. Strain Anal. 8, 134-139 (1973).
33. A. D. Crocombe and R. D. Adams, J. Adhesion 13, 141-155 (1981).
34. R. D. Adams, J. Coppendale and N. A. Peppiatt, in: Adhesion 2, K. W. Allen (Ed.), pp. 105-120. Elsevier Applied Science, London (1978).
35. R. D. Adams, in: Adhesion 4, K. W. Allen (Ed.), pp. 87-101. Elsevier Applied Science, London (1980).
36. R. D. Adams, in: Developments in Adhesives-2, A. J. Kinloch (Ed.), pp. 45-81. Elsevier Applied Science, London (1981).
37. R. D. Adams, R. W. Atkins, J. A. Harris and A. J. Kinloch, J. Adhesion 20, 29-53 (1986).
38. R. D. Adams and J. A. Harris, Int. J. Adhesion Adhesives 7, 69-80 (1987).
39. R. D. Adams and W. C. Wake, Structural Adhesive Joints in Engineering. Elsevier Applied Science, London (1984).
40. A. J. Kinloch, Adhesion and Adhesives. Chapman & Hall. London (1987).
41. J. P. H. Webber, J. Adhesion 12, 257 (1981).
42. M. K. Apalak and R. Davies, Int. J. Adhesion Adhesives 13, 219-235 (1993).
43. M. K. Apalak and R. Davies, Int. J. Adhesion Adhesives 14, 163-174 (1994).
44. M. M. Sadek and S. A. Tobias, Comparative dynamic acceptance tests for machine tools applied to horizontal milling machines, Inst. Mech. Eng. Proc. 185, 24-71 (1971).
45. E. J. Lamb and K. Tamimi, in: Proc. 18th Int. Machine Tool Design Res. Conf, London, pp. 561-567. London (1977).
46. A. A. Khalil and R. Davies, Int. J. Adhesion Adhesives 8, 211-218 (1989).
47. R. Davies and A. A. Khalil, Int. J. Adhesion Adhesives 10, 25-30 (1990).
48. SDRC I-DEAS, The Integrated Design Engineering Analysis Software, Ver. 4.0, User Guide: Finite Element Modelling, Structure Dynamics Research Corporation (1990).
49. MSC/NASTRAN The general purpose finite element software, Ver. 66A, User's Manual Vols I and II, The Macneal-Schwendler Corporation (1990).
50. E. Hinton and J. S. Campbell, Int. J. Numer. Meth. Eng. 8, 461-480 (1974).