A review of pool boiling from inclined and downward-facing flat surfaces

International Journal of Heat and Technology

Volumn 14, Issue 2, 1996, Pages 95-104

  El Genk, Mohamed S ^a  

^a University of New Mexico   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ATMOSPHERIC PRESSURE; BUBBLES (IN FLUIDS); CAPILLARY FLOW; COOLING; EVAPORATION; HEAT CONVECTION; HEAT FLUX; HEAT TRANSFER; INTERFACES (MATERIALS); MIXING; PHASE TRANSITIONS; SURFACES;

FILM BOILING; LIQUID SUBCOOLING; NUCLEATE BOILING HEAT FLUX; POOL BOILING; THERMOCAPILLARY CONVECTION;

BOILING LIQUIDS;

EID: 0030360526     PISSN: 03928764     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (36)

1. D. S. Jung, J. E. S. Venart and A. C. M. Sousa, Effects of Enhanced Surfaces and Surface Orientation on Nucleate and Film Boiling Heat Transfer in R-11, Int. J. Heat Mass Trans., Vol. 30 (12), 2627-2639, (1987).
2. R. E. Henry and H. K. Fauske, External Cooling of a Reactor Vessel Under Severe Accident Conditions, J. Nucl. Engrg. and Des., Vol. 139, 31-43, (1993).
3. T. G. Theofanous et al., Critical Heat Flux Through Curved, Downward Facing, Thick Walls, J. Nuclear Engineering and Design, Vol. 151, 247-258, (1994).
4. T. G. Theofanous and S. Syri, The Coolability Limits of a Reactor Pressure Vessel Lower Head, Proc. 7th Int. Mtg. on Nuc. Rctr. Thermal-Hydraulics NURETH-7, NUREG/CP-0142, Vol. 1, 638-647, (1995).
5. T. Y. Chu, B. L. Bainbridge, J. H. Bents, and R. B. Simpson, Observation of Quenching of Downward-Facing Surfaces, SANDIA Rpt, SAND93-0688·UC-940, Sandia National Laboratories, Albq., NM, (1994).
6. T. Y. Chu, J. H. Bentz, and R. B. Simpson, Observations of the Boiling Process from a Downward-Facing Torispherical Surface: Confirmatory Testing of the Heavy Water New Production Reactor Flooded Cavity design, AIChE Symposium Series-Heat Transfer 306, (M. S. El-Genk, ed.), Vol. 91, 154-167, (1995).
7. F. B. Cheung, K. H. Haddad, L. M. Charma, F. Otero, and A. L. Brundage, Boundary Layer Boiling on the External Bottom Surface of a Hemispherical Vessel, Tenth. Proc. Nuc. Rctr. Thermal Hydraulics, ANS winter annual Mtg., Washington, DC, 155-162, (1994).
8. K. H. Haddad, Y. C. Liu and F. B. Cheung, Spatial Variation of Critical heat Flux on a Downward Facing Hemispherical Surface, Proc. 1995 Ntl. Heat Transfer Conf., Vol. 14, HTD-vol. 316 (F. B. Cheung, Y. A. Hassan and A. Singh, eds. ), 23-32, (1995).
9. H. Merte, Jr., Low Velocity Forced Convection Nucleate Boiling at Various Orientations Relative to Earth Gravity, Pool and External Flow Boiling (V. K. Dhir and A. E. Bergles, eds.) ASME, NY, 439-443, (1992).
10. M. S. El-Genk, A. G. Glebov and Z. Guo, Pool Boiling from Downward-Facing Curved Surface in Saturated Water, Proc. 10th Int. Heat Trans. Conf., Brighton, England, Vol. 5, 45-50, 14-18 August (1994).
11. M. S. El-Genk and A. G. Glebov, Transient Pool Boiling from Downward-Facing Curved Surfaces, Int. J. Heat and Mass Trans., Vol. 28(12), 2209-2224, (1995).
12. M. S. El-Genk and A. G. Glebov, Effect of Subcooling on Film Boiling from a Downward-Facing Curved Surface, AIChE Symposium Series-Heat Transfer 306, (M. S. El-Genk, ed.), Vol. 91, 125-131, (1995).
13. K. Nishikawa, Y. Fujita, S. Uchida and H. Ohta, Effect of Heating Surface Orientation on Nucleate Boiling Heat Transfer, ASME-JSME Thermal Engng Joint Conf, Vol. 1, 129-136, (1983).
14. C. Beduz, R. G. Scurlock and A. J. Sousa, Angular Dependence of Boiling Heat Transfer Mechanisms in Liquid Nitrogen, Adv. in Cryog. Eng. (R. W. Fast, ed.), Plenum Press, NY, Vol. 33, 363-370, (1988).
15. S. Nishio and G. R. Chandratilleke, Steady-State Pool Boiling Heat Transfer to Saturated Liquid Helium at Atmospheric Pressure, JSME Int. J. Series I, Vol. 32(4), 639-945, (1989).
16. Z. Guo and M. S. El-Genk, An Experimental Study of Saturated Pool Boiling from Downward Facing and Inclined Surfaces, Int. J. Heat Mass Trans., Vol. 35(9), 2109-2117, (1992).
17. Z. Guo and M. S. El-Genk, Effects of Liquid Subcooling on the Quenching of Inclined and Downward-Facing Flat Surfaces in Water, AIChE Symp. Series No. 288, Vol. 88, 241-148, (1992).
18. M. S. El-Genk and Z. Guo, Saturated and Subcooled Pool Boiling from Downward-Facing and Inclined Surfaces, Pool and External Flow Boiling , (V. K. Dhir and A. E. Bergles, eds.), ASME, NY, 243-249, (1992).
19. M. S. El-Genk and Z. Guo, Transient Boiling from Inclined and Downward-Facing Surfaces in a Saturated Pool, Int. J. Refrig., Vol. 16(6), 414-422, (1993).
20. S. Ishigai, K. Inoue, Z. Kiwaki and T. Inai, Boiling Heat Transfer From a Flat Surface Facing Downward, Proc. Int. Heat Trans. Conf, Paper No. 26, (1961).
21. B. D. Marcus and D. Dropkin, The Effect of Surface Configuration on Nucleate Boiling Heat Transfer, Int. J. Heat Mass Trans., Vol. 6, 863-867, (1963).
22. P. M. Githinji and R. H. Sabersky Some Effects on the Orientation of the Heating Surface in Nucleate Boiling, J. Heat Trans., Vol. 85, 379, (1963).
23. D. N. Lyon, Boiling Heat Transfer and Peak Nucleate Boiling Fluxes in Saturated Liquid Helium Between the λ and Critical Temperatures, "Adv. in Cryog. Eng., Vol. 19, 371-378, (1964).
24. R. P. Anderson and Bova, L., The Role of Down Facing Burnout in Post-accident Heat Removal, Trans. Am. Soc., Vol. 14, 294-304, (1971).
25. I. P. Vishnev, I. A. Filatov, Ya. G. Vinokur, V. V. Gorokhov and G. G. Svalov, Study of Heat Transfer in Boiling of Helium on Surfaces with Various Orientations, Heat Trans.-Sov. Res., Vol. 8(4), 104-108, (1976).
26. L. T. Chen, Heat Transfer to Pool Boiling Freon From Inclined Heating Plate, let. in Heat and Mass Trans., Vol. 5, 111-120, (1978).
27. N. Seki, S. Fukushako and K. Torikoshi, Experimental Study on the Effect of Orientation of Heating Circular Plate on Film Boiling Heat Transfer for Fluorocarbon Refrigerant R-11, J . Heat Trans., Vol. 100, 624-628, (1978).
28. W. Peyayopanakul and J. W. Westwater, Evaluation of the Unsteady-State Quenching Method for Determining Boiling Curves, Int. J. Heat and Mass Trans., Vol. 21, 1437-1445, (1978).
29. J. W. Westwater, J. J. Hwalek and M. E. Irving, Suggested Standard Method for Obtaining Boiling Curves by Quenching, J. Ind. Eng. Fundam., Vol. 25, 685-692, (1986).
30. M. S. El-Genk and C. Gao, Transient Heat Conduction during Quenching of Downward-facing Copper and Stainless-steel Convex Surfaces, J. Num. Heat Trans., Part A: Applications (in press), (1996).
31. S. S. Kutatelatze, Heat Transfer in Condensation and Boiling, US AEC Report AEC-tr-3770, (1952).
32. S. S. Kutatelatze, Boiling Heat Transfer, Int. J. Heat and Mass Trans., Vol. 4, 31-45, (1961).
33. N. Zuber, Hydrodynamic Aspects of Boiling Heat Transfer, AEC Report, AECU-4439, June (1959).
34. J. H. Lienhard and V. K. Dhir, Extended Hydrodynamic Theory of the Peak and Minimum Pool Boiling Heat Flux, NASA R-2270, (1973).
35. J. H. Lienhard, V. K. Dhir and D. M. Riherd, Peak Pool Boiling Heat-Flux Measurements on Finite Horizontal Flat Plates, J. Heat Trans., Vol. 95, 477-482, (1973).
36. J. Straub, The Role of Surface Tension for Two-Phase Heat and Mass Transfer in the Absence of Gravity, Exper. Therm. and Fluid Sci., Vol. 9, 253-273, (1994).