A mixed mode I/II inelastic line spring

International Journal of Solids and Structures

Volumn 33, Issue 28, 1996, Pages 4143-4166

  Skallerud, Bjørn ^a  

^a NORWEGIAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Norway)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; CONTINUUM MECHANICS; CRACK PROPAGATION; DEFORMATION; ELASTICITY; FINITE ELEMENT METHOD; INTEGRAL EQUATIONS; LOADS (FORCES); MATHEMATICAL MODELS; PIPE JOINTS; PROBLEM SOLVING;

FRACTURE INITIATION CAPACITY; INELASTIC LINE SPRING; J INTEGRAL; MIXED MODE DEFORMATIONS; TUBULAR JOINTS;

FRACTURE MECHANICS;

EID: 0030296125     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/0020-7683(95)00271-5     Document Type: Article

References (41)

1. Ahmand, J., Barnes, C. R. and Kanninen, M. F. (1983). An Elastoplastic Finite Element Investigation of Crack Initiation under Mixed Mode Static and Dynamic Loading. ASTM STP 803 (eds C. F. Shih and J. P. Gudas), pp. I214-I239.
2. Aoki, S., Kishimoto, K., Yoshida, T. and Sakata, M. (1987). A finite element study of the near crack tip deformation fields of a ductile material under mixed mode loading. J. Mech. Phys. Solids 35, 431-457.
3. Aoki, S., Kishimoto, K., Yoshida, T., Sakata, M. and Richard, H. A. (1990). Elastic-plastic fracture behaviour of aluminium under mixed mode loading. J. Mech. Phys. Solids 38, 195-215.
4. Betegon, C. and Hancock, J. W. (1991). Two-parameter characterization of elastic-plastic crack-tip fields. J. Appl. Mech. 58, 104-110.
5. Brocks, W., Kunecke, G., Noack, H. D. and Veith, H. (1989). On the transferability of fracture mechanics parameters from specimens to structures using FEM. Nuclear Engng Design 112, 1-14.
6. Chao, Y. J., Yang, S. and Sutton, M. A. (1994). On the fracture of solids characterized by one or two parameters: theory and practice. J. Mech. Phys. Solids 42, 629-647.
7. Cheaitani, M. J. and Burdekin, F. T. (1994). Ultimate strength of cracked tubular joints. In Tubular Structures VI (eds Grundy, Holgate and Wong), pp. 607-616.
8. Dodds, R. H. (1982). Effect of reduced integration on the 2-D quadratic isoparametric element in plane strain plasticity. Int. J. Fract. 19, R75-R82.
9. Goldman, N. L. and Hutchinson, J. W. (1975). Fully plastic crack problems: the center cracked strip under plane strain. Int. J. Solids Structures 11, 575-591.
10. Green, A. P. and Hundy, B. B. (1956). Initial plastic yielding in the notch bending test. J. Mech. Phys. Solids 4, 128-144.
11. Gross, B. and Srawley, J. E. (1965). Stress intensity factors for single edged specimens in bending and combined bending and tension. NASA TD D-2603.
12. Hibbitt, Karlson, and Sorenson (1992). ABAQUS Manual, version 5.2.
13. Huang, X. and Hancock, J. W. (1988). The stress intensity factors of semi-elliptical cracks in a tubular welded T-joint under axial loading. Engng Fract. Mech. 30, 25-55.
14. Hutchinson, J. (1968). Singular behaviour at the end of a tensile crack in a hardening material. J. Mech. Phys. Solids 16, 13-31.
15. Ishikawa, H., Kitagawa, H. and Okamura, H. (1979). J integral of a mixed mode crack and its application. Int. Conf. Mater. 3, 447-455.
16. Kishimoto, K., Aoki, S. and Sakata, M. (1980). On the path independent integral J. Engng Fract. Mech. 13, 841-850.
17. Lee, H., and Parks, D. M. (1993). Fully plastic analyses of plane strain single edged cracked specimens subject to combined tension and bending. Int. J. Fract. 63, 329-349.
18. Lee, H., and Parks, D. M. (1995). Enhanced elastic-plastic line spring finite element. Int. J. Solids Structures 32, 2393-2418.
19. Li, F. Z., Shih, C. F. and Needleman, A. (1985). A comparison of methods for calculation of energy release rates. Engng Fract. Mech. 21, 405-421.
20. McMeeking, R. M. and Parks, D. M. (1979). On criteria for J-dominance of crack tip fields in large scale yielding. ASTM STP 668 (eds Landes, Begley and Clarke), pp. 175-194.
21. Merkle, J. G. and Corten, H. T. (1974). A J integral analysis for the compact specimen, considering axial force as well as bending effects. J. Press. Vessel Tech. 286-292.
22. O'Dowd, N. P. and Shih, C. F. (1991). Family of crack-tip fields characterized by a triaxiality parameter - I. Structure of fields. J. Mech. Phys Solids 39, 989-1016.
23. Parks, D. M. (1974). A stiffness derivative finite element technique for determination of crack tip stress intensity factors. Int. J. Fract. 487-502.
24. Parks, D. M. (1981). The inelastic line spring: estimates of elastic-plastic fracture mechanics parameters for surface cracked shells. J. Press. Vessel Techn. 103, 246-254.
25. Parks, D. M. and White, C. S. (1982). Elastic-plastic line spring finite elements for surface cracked plates and shells. J. Press. Vessels Tech. 104, 287-292.
26. Rice, J. (1968). A path independent integral and the approximate analysis of strain concentration by notches and cracks. J. Applied Mech. 35, 379-386.
27. Rice, J. and Rosengren, G. F. (1968). Plane strain deformation near a crack tip in a power law hardening material. J. Mech. Phys. Solids 16, 1-12.
28. Rice, J. and Levy, N. (1972). The part through surface crack in an elastic plate. J. Applied Mech. 185-194.
29. Rice, J. R. (1972). The line spring model for surface flaws. In The Surface Crack Physical Problems and Computer Solutions (ed. J. L. Swedlow), ASME.
30. Rice, J. R. (1975). Models for stable crack growth. In Mechanics and Mechanisms of Crack Growth (ed. M. J. May), British Steel Corp.
31. Shih, C. F. (1974). Small scale yielding analysis of mixed mode plane strain crack problems. In Fracture Analysis, ASTM STP 560, pp. 187-210.
32. Shih, C. F. and Hutchinson, J. W. (1976). Fully plastic solutions and large scale yielding estimates for plane stress crack problems. J. Engng Mat. Tech. 98, 289-295.
33. Shih, C. F., German, M. D. and Kumar, V. (1981). An engineering approach for examining crack growth and stability. Int. J. Press. Vessel Piping 9, 159-196.
34. Shih, C. F. and German, M. D. (1981). Requirements for a one-parameter characterization of crack tip fields by the HRR singularity. Int. J. Fract. 17, 27-43.
35. Shih, C. F. (1981). Relationships between the J-integral and the crack opening displacement for stationary and opening cracks. J. Mech. Phys. Solids 29, 305-326.
36. Shih, C. F. and Needleman, A. (1984). Fully plastic crack problems. Part 1: solutions by a penalty method. J. Appl. Mech. 51, 48-56.
37. Shiratori, M. and Miyoshi, T. (1983). Evaluation of J-Integral for Surface Cracks. ASTM STP 803 (eds C. F. Shih and J. P. Gudas), pp. I410-I424.
38. Skallerud, B., Eide, O. I. and Berge, S. (1994). Ultimate capacity of cracked tubular joints: comparison between numerical simulations and experiments. In Proc. 7th Int. Conf. Behaviour of Offshore Structures (BOSS), Vol. 3, pp. 241-259, Boston.
39. Skallerud, B. (1995). Inelastic line springs in nonlinear analysis of cracked tubular joints. Fatigue Fract. Engng Mat. Struct. 18, 463-477.
40. Tada, Paris and Irwin (1973). The Stress Analysis of Cracks Handbook, Del Research Corp. Hellertown, PA, U.S.A.
41. White, C. S., Ritchie, R. O. and Parks, D. M. (1983). Ductile Growth of Part-through Surface Cracks: Experiment and Analysis. ASTM STP 803 (eds C. F. Shih and J. P. Gudas), pp. I384-I409.