Manifestations of dynamic strain aging in soft-oriented NiAl single crystals

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 27, Issue 11, 1996, Pages 3542-3557

  Weaver, M L ^a,b   Kaufman, M J ^c,d   Noebe, R D ^e  

^a University of Florida   (United States)

^b FLORIDA A AND M UNIVERSITY   (United States)

^c FLORIDA STATE UNIVERSITY   (United States)

^d UNIVERSITY OF FLORIDA   (United States)

^e NASA GLENN RESEARCH CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITION EFFECTS; COMPRESSIVE STRENGTH; CRYSTAL MICROSTRUCTURE; DISLOCATIONS (CRYSTALS); GRAIN BOUNDARIES; INTERMETALLICS; SHEAR STRESS; SINGLE CRYSTALS; STRAIN HARDENING; TENSILE PROPERTIES; THERMAL EFFECTS;

DYNAMIC STRAIN AGING (DSA); NICKEL ALUMINIDE SINGLE CRYSTALS;

NICKEL ALLOYS;

EID: 0030287438     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02595446     Document Type: Article

References (66)

1. R.W. Margevicius and J.J. Lewandowski: Scripta Metall. Mater., 1991, vol. 25, pp. 2017-22.
2. R.W. Margevicius, J.J. Lewandowski, I.E. Locci, and R.D. Noebe: Scripta Metall. Mater., 1993, vol. 29, pp. 1309-12.
3. R.W. Margevicius and J.J. Lewandowski: Ada Metall. Mater., 1993, vol. 41, pp. 485-96.
4. R.W. Margevicius, J.J. Lewandowski, and I.E. Locci: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 577-84.
5. J.E. Hack, J.M. Brzeski, and R. Darolia: Mater. Sei. Eng., 1995, vols. A192-A193, pp. 268-76.
6. J.E. Hack, J.M. Brzeski, R. Darolia, and R.D. Field: in HighTemperature Ordered Intermetallics V, I. Baker, R. Darolia, J.D. Whittenberger, and M.H. Yoo, eds., Materials Research Society, Pittsburgh, PA, 1993, vol. 288, pp. 1197-1202.
7. E.P. Lautenschlager, D.A. Kiewit, and J.O. Brittain: Trans. TMSAIME, 1965, vol. 233, pp. 1297-1302.
8. R.D. Field, D.F. Lahrman, and R. Darolia: in High-Temperature Ordered Intermetallic Alloys V, I. Baker, R. Darolia, J.D. V Whittenberger, and M.H. Yoo, eds., Materials Research Society, Pittsburgh, PA, 1993, vol. 288, pp. 423-28.
9. J.M. Brzeski, J.E. Hack, R. Darolia, and R.D. Field: Mater. Sei. Eng., 1993, vol. A170, pp. 11-18.
10. C.T. Liu, E.H. Lee, E.P. George, and A.J. Duncan: Scripta Metall. Mater., 1994, vol. 30, pp. 387-92.
11. R.T. Pascoe and C.W.A. Newey: Metall. Sei. J., 1968, vol. 2, pp. 138-43.
12. R.T. Pascoe and C.W.A. Newey: Metall. Sei. J., 1971, vol. 5, pp. SO55.
13. R.D. Noebe, R.R. Bowman, and M.V. Nathal: Int. Maler. Rev., 1993, vol. 38, pp. 193-232.
14. M.L. Weaver, V. Levit, M.J. Kaufman, and R.D. Noebe: in HighTemperature Ordered Intermetallic Alloys VI, J.A. Horton, I. Baker, S. Hanada, R.D. Noebe, and D.S. Schwartz, eds., Materials Research Society, Pittsburgh, PA, 1995, vol. 364, pp. 425-30.
15. M.L. Weaver: Ph.D. Dissertation, University of Florida, Gainesville, FL, 1995.
16. J.M. Brzeski, J.E. Hack, and R. Darolia: in High-Temperature Ordered Intermetallic Alloys VI, J.A. Horton, I. Baker, S. Hanada, R.D. Noebe, and D.S. Schwanz, eds., Materials Research Society, Pittsburgh, PA, 1995, vol. 364, pp. 419-24.
17. J.E. Hack, J.M. Brzeski, and R. Darolia: Scripta Metall. Mater., 1992, vol. 27, pp. 1259-63.
18. J.M. Brzeski: Ph.D. Dissertation, Yale University, New Haven, CT, 1995.
19. M.L. Weaver, M.J. Kaufman, and R.D. Noebe: Intermetallics, 1996, vol. 4, pp. 121-29.
20. M.L. Weaver, R.D. Noebe, J.J. Lewandowski, B.F. Oliver, and M.J. Kaufman: Maler. Sei. Eng., 1995, vols. A192-A193, pp. 179-85.
21. M.L. Weaver, R.D. Noebe, J.J. Lewandowski, B.F. Oliver, and M.J. Kaufman: Intermetallics, 1996, accepted for publication.
22. M.L. Weaver, R.D. Noebe, and M.J. Kaufman: Scripta Maler., 1996, vol. 34, pp. 941-48.
23. U.F. Kocks: Metall. Trans. A, 1985, vol. 16A, pp. 2109-29.
24. R.J. Wasilewski: Trans. TMS-AIME, 1966, vol. 36, pp. 455-57.
25. R.D. Noebe, R.R. Bowman, and M.V. Nathal: in Physical Metallurgy and Processing of Intermetallic Compounds, N.S. Stoloff and V.K. Sikka, eds., Chapman and Hall, New York, NY, 1995, pp. 212-50.
26. D.B. Miracle: Acta Metall. Mater., 1993, vol. 41, pp. 649-84.
27. M.L. Weaver, M.J. Kaufman, and R.D. Noebe: Scripta Metall. Mater., 1993, vol. 29, pp. 1113-18.
28. J.S. Winton, A.A. Morrone, V.l. Levit, and M.J. Kaufman: Paper presented at the TMS Fall Meeting, Cleveland, OH, 1995.
29. J.S. Winton, V.l. Levit, and M.J. Kaufman: University of Florida, Gainesville, FL, unpublished research, 1995.
30. P. Rodriquez: Bull. Mater. Sei. (India), 1984, vol. 6, pp. 653-63.
31. P.O. McCormick: Acta Metall., 1972, vol. 20, pp. 351-54. i
32. S. Venkadesan, C. Phaniraj, P.V. Sivaprasad, and P. Rodriguez: Acta \ Metall. Mater., 1992, vol. 40, pp. 569-80. i
33. E. Pink: Scripta Metall., 1983, vol. 17, pp. 847-52. j
34. R.W. Hayes and W.C. Hayes: Acta Metall, 1982, vol. 30, pp. | 1295-1301. . I
35. J.T. Kirn: Ph.D. Dissertation, The University of Michigan, Ann Arbor, 1 MI, 1990. j
36. P. Nagpal, I. Baker, and J.A. Horton: Intermetallics, 1994, vol. 2, pp. 1 23-29.
37. P. Nagpal and I. Baker: J. Mater. Lett., 1992, vol. 11, pp. 1209-10.
38. J.T. Kirn, R.D. Noebe, and R. Gibala: Proc. Int. Symp. of Intermetallic Compounds-Structural and Mechanical Properties, O. Izumi, ed., Japan Institute of Metals, Sendai, 1991, pp. 591-95.
39. S.C. Tjong and J.S. Zhang: Scripta Metall. Mater., 1995, vol. 32, pp. 1589-93.
40. C.L. Cullers, S.D. Antolovich, and R.D. Noebe: in High-Temperature Ordered Intermetallic Alloys V, I. Baker, R. Darolia, J.D. Whittenberger, and M.H. Yoo, eds., Materials Research Society, Pittsburgh, PA, 1993, vol. 288, pp. 531-36.
41. T. Takasugi, J. Kishino, and S. Hanada: Acta Metall. Mater., 1993, vol. 41, pp. 1009-20.
42. M.A. Crimp, S.C. Tonn, and Y. Zhang: Mater. Sei. Eng., 1993, vol. A170, pp. 95-102.
43. Y. Zhang, S.C. Tonn, and M.A. Crimp: in High-Temperature Ordered Intermetallic Alloys V, I. Baker, R. Darolia, J.D. Whittenberger, and M.H. Yoo, eds., Materials Research Society, Pittsburgh, PA, 1993, vol. 288, pp. 379-84.
44. R.D. Field, D.F. Lahrman, and R. Darolia: in High-Temperature Ordered Intermetallic Alloys IV, L.A. Johnson, O.P. Pope, and J.O. Stiegler, eds., Materials Research Society, Pittsburgh, PA, 1991, vol. 213, pp. 255-60.
45. L.P. Kubin and Y. Estrin: J. Phys. HI, 1991, vol. 1, pp. 92913.
46. C.R. Brooks: in ASM Metals Handbook Desk Edition, H.E. Boyer and T.L. Gall, eds., ASM, Metals Park, OH, 1985, pp. 28-66.
47. E.T. Stephenson: Trans. TMS-AIME, 1965, vol. 233, pp. 1183-84.
48. M. Koiwa: Phil. Mag., 1971, vol. 24, pp. 81-106.
49. M. Koiwa: Phil. Mag., 1971, vol. 24, pp. 799-814.
50. M. Koiwa: Phil. Mag., 1971, vol. 24, pp. 539-54.
51. M. Koiwa: Phil. Mag., 1971, vol. 24, pp. 107-22.
52. R.E. Reed-Hill and T. Zhu: High Temp. Mater. Proc., 1984, vol. 6, pp. 93-117.
53. R.E. Reed-Hill and M.J. Kaufman: Acta Metall. Mater., 1995, vol. 43, pp. 1731-39.
54. K.S.B. Rose and S.G. Glover: Ada Metall., 1966, vol. 14, pp. 150516.
55. B.K. Zuidema, O.K. Subramanyam, and W.C. Leslie: Metall. Trans. j A, 1987, vol. ISA, pp. 1629-39.
56. T. Shun, C.M. Wan, and J.G. Byrne: Acta Metall. Mater., 1992, vol. 40, pp. 3407-12.
57. J.D. Baird and C.R. MacKenzie: J. Iron Steel Inst., 1964, vol. 202, pp. 427-36.
58. J.D. Baird and A. Jamieson: J. Iron Steel Inst., 1966, vol. 204, pp. 793-803.
59. J.D. Baird and A. Jamieson: J. Iron Steel Inst., 1972, vol. 210, pp. 841-46.
60. R.L. Klueh and R.E. Oakes, Jr.: J. Eng. Mater. Technol., 1976, vol. 98, pp. 361-68.
61. R.L. Klueh: J. Nucl. Mater., 1977, vol. 68, pp. 294-307.
62. T.C. Chou and T.G. Nieh: Scripta Metall. Mater., 1991, vol. 25, pp. 2059-64.
63. T.C. Chou and T.G. Nieh: in High-Temperature Ordered Intermetallic Alloys IV, L.A. Johnson, D.P. Pope, and J.O. Stiegler, eds., Materials Research Society, Pittsburgh, PA, 1991, vol. 213, pp. 1045-50.
64. H. Hosoda, K. Inoue, and Y. Mishima: in High-Temperature Ordered Intermetallic Alloys VI, J. Horton, I. Baker, S. Hanada, R.D. Noebe, and D.S. Schwartz, eds., Materials Research Society, Pittsburgh, PA, 1995, vol. 364, pp. 437-42.
65. I.M. Anderson, A.J. Duncan, and J. Bcntley: in High-Temperature Ordered Intermetallic Alloys VI, J. Horton, I. Baker, S. Hanada, R.D. Noebe, and D.S. Schwartz, eds., Materials Research Society, Pittsburgh, PA, 1995, vol. 364, pp. 443-48.
66. R. Darolia, R.D. Field, R.D. Noebe, A. Garg, and W.S. Walston: A Mechanistic Study of Microalloying Effects in NiAl, GE Aircraft Engines/Air Force Office of Scientific Research, Final Report, July l, 1991-Mar. 31, 1995.