An innovative approach to increase the accuracy of multi- axis machines for process- intermittent inspection

Journal of Manufacturing Science and Engineering, Transactions of the ASME

Volumn 118, Issue 4, 1996, Pages 585-594

  Mou, J ^a   Liu, C R ^b  

^a Arizona State University   (United States)

^b SCHOOL OF INDUSTRIAL ENGINEERING   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; FACTORY AUTOMATION; FITS AND TOLERANCES; MACHINE TOOLS; MATHEMATICAL MODELS; PROCESS CONTROL; ROBOTS; ROBUSTNESS (CONTROL SYSTEMS);

COORDINATE MEASURING MECHANICS (CMM); MULTIAXIS MACHINES; PROCESS INTERMITTENT INSPECTION;

INSPECTION;

EID: 0030286825     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.2831071     Document Type: Article

References (38)

1. Belfone, G., Bona, B., Donati, E., Ferraris, F., Gorini, I., Morei, S., Peisino, M., and Sartori, S., 1987, “Coordinate Measuring Machines and Machine Tool Selfcalibration and Error Correction,” CIRP, Vol. 36, No. 1, pp. 359-364.
2. Broderick, P., and Cipra, R., 1988, “A Method for Determining and Correcting Robot Position and Orientation Errors Due to Manufacturing,” ASME Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 110, pp. 3-10.
3. Bryan, J., 1982, “A Simple Method for Testing Measuring Machines and Machine Tools, Part I: Principles and Applications,” Precision Engineering, Vol. 4, pp. 61-69.
4. Busch, K., Kunzmann, H., and Waldele, F., 1985, “Calibration of Coordinate Measuring Machines,” Precision Engineering, Vol. 7, pp. 139-144.
5. Chen, J. S., Yuan, J. S., Ni, J., and Wu, S. M., 1993, “Real-time Compensation for Time-variant Volumetric Errors on a Machine Center,” ASME Journal of Engineering for Industry, Vol. 115, pp. 472-479.
6. Donmez, A., Blomquist, D., Hocken, R., Liu, C., and Barash, M., 1986, “A General Methodology for Machine Tool Accuracy Enhancement by Error Compensation,” Precision Engineering, Vol. 8, pp. 187-195.
7. Ferreira, P., and Liu, C., 1986, “A Contribution to the Analysis and Compensation of the Geometric Error of a Machining Center,” CIRP, Vol. 35, pp. 259-262.
8. Hocken, R., Simpson, A., Borchardt, B., Lazar, J., Reeve, C., and Stein, P., 1977, “Three Dimensional Metrology,” CIRP Vol. 26, pp. 403-408.
9. Hocken, R., 1980, “Technology of Machine Tools,” Vol. 5: Machine Tool Accuracy, UCRL-52960-5, Lawrence Livermore Laboratory, University of California, Livermore, CA.
10. Hollerbach, J., 1988, “A Survey of Kinematic Calibration,” Robotics Review, O. Khatib, J. Craig, and T. Lozano-Perez, eds., MIT Press.
11. Jouy, F., 1986, “Theoretical Modelisation and Experimental Identification of the Geometrical Parameters of Coordinate-Machines by Measuring a Multi- Directed Bar,” CIRP, Vol. 35, pp. 393-396.
12. Knapp, W., 1983, “Circular Test for Three Coordinate Measuring Machines and Machine Tools,” Precision Engineering, Vol. 5, pp. 115-124.
13. Kunzmann, H., and Waldele, F., 1983, “On Testing Coordinate Measuring Machines (CMM) with Kinematic Reference Standards (KRS),” CIRP, Vol. 32, pp. 465-468.
14. Kunzmann, H., Trapet, E., and Waldele, F, 1990, “A Uniform Concept for Calibration, Acceptance Test, and Periodic Inspection of Coordinate Measuring Machines Using Reference Objects,” CIRP, Vol. 39, No. 1, pp. 561-564.
15. Kurtoglu, A., 1990, “The Accuracy Improvement of Machine Tools,” CIRP, Vol. 39, No. 1, pp. 417-419.
16. Lee, S., 1986, “Accuracy Improvement of a CNC Machining Center by Using a Touch-Trigger Probe and a Metrology Pallet,” Ph.D. Dissertation, Purdue University, W. Lafayette, IN.
17. Leete, D., 1961, “Automatic Compensation of Alignment Errors in Machine Tools,” Int. J. Mach. Tool Des. Res., Vol. 1, pp. 293-324.
18. Love, W., and Scarr, A., 1973, “The Determination of the Volumetric Accuracy of Multi-Axis Machines,” M.T.D.R. Conference Proceedings, Vol. 14, pp. 307-315.
19. Menq, C., and Bom, J., 1989, “Statistical Characterization of Position Errors of an Ensemble of Robots and Its Applications,” ASME Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 3, pp. 215-222.
20. Mou, J., 1992, “An Adaptive Methodology for Monitoring and Controlling of Precision Machining and On-machine Inspection,” Ph.D. Dissertation, Purdue University, West Lafayette, IN.
21. Mou, J., and Liu, C. R., 1995, “An Adaptive Methodology for Machine Tool Errors Correction,” ASME Journal of Engineering for Industry.
22. Mou, J., Donmez, M. A., and Cetinkunt, S., 1995, “An Adaptive Methodology Using Features-Based Analysis Techniques for Machine Error Correction: Part I—Theory Derivation,” ASME Journal of Engineering for Industry.
23. Mou, J., Donmez, M. A., and Cetinkunt, S., 1995, “An Adaptive Methodology Using Features-Based Analysis Techniques for Machine Error Correction: Part II—Experimental Verification,” ASME Journal of Engineering for Industry.
24. Okushima, K., Kakino, Y., and Higashimoto, A., 1975, “Compensation of Thermal Displacement by Coordinate System Correction,” CIRP, Vol. 24, No. 1, pp. 327-331.
25. Roth, Z., Mooring, B., and Ravani, B., 1987, “An Overview of Robot Calibration,” IEEE J, Robotics and Automation, Vol. 3, No. 5, pp. 377-385.
26. Roe, J., 1986, “Probing for Precision and Productivity,” Biennial International Machine Tool Technical Conference, Vol. 12, pp. 173-180.
27. Sata, T., Takeuchi, Y., Sakamoto, M., and Week, M., 1981, “Improvement of Working Accuracy on NC Lathe by Compensation for the Thermal Expansion of Tool,” CIRP, Vol. 30, No. 1, pp. 445-449.
28. Schultschik, R., 1977, “The Components of Volumetric Accuracy,” CIRP, Vol. 25, pp. 223-227.
29. Shamma, J., and Whitney, D., 1987, “A Method for Inverse Robot Calibration,” ASME Journal of Dynamic Systems, Measurement; and Control, Vol. 109, pp. 36-43.
30. Sheth, P., and Uicker, J., Jr., 1972, “IMP (Integrated Mechanisms Program), a Computer-Aided Design Analysis System for Mechanisms and Linkages,” ASME Journal of Engineering for Industry, Vol. 94, pp. 454-464.
31. Takeuchi, Y., Sakamoto, M., and Sata, Y., 1982, “Improvement in the Working Accuracy of an NC Lathe by Compensating for Thermal Expansion,” Precision Engineering, Vol. 4, No. 1, pp. 19-24.
32. Teeuwsen, J., Soons, J., and Schellekens, P., 1989, “A General Method for Error Description of CMMs Using Polynomial Fitting Procedures,” CIRP, Vol. 38, No. 1, pp. 505-510.
33. Tlusty, J., 1980, “Testing of Accuracy of Machine Tools,” UCRL-52960- Supp. 1, Lawrence Livermore Laboratory, University of California, Livermore, CA.
34. Week, M., 1984, “Metrological Analysis and Performance Tests,” Handbook of Machine Tools, Vol. 4, Wiley, New York.
35. Veitschegger, W., and Wu, C., 1988, “Robot Calibration and Compensation,” IEEE J. Robotics and Automation, Vol. 4, No. 6, pp. 643-656.
36. Wu, C., 1984, “A Kinematic CAD Tool for the Design and Control of a Robot Manipulator,” Int. J. Robotics Research, Vol. 3, No. 1, pp. 58-67.
37. Zhang, G., Ouyang, R., Lu, B., Hocken, R., Veale, R., and Donmez, A., 1988, “A Displacement Method for Machine Geometric Error of Machining Center,” CIRP, Vol. 37, pp. 515-518.
38. Zhuang, H., and Roth, Z., 1991, “A Unified Approach to Kinematic Modeling, Identification and Compensation for Robot Calibration,” Control and Dynamic Systems, C, Leondes, ed., Vol. 39, pp. 71-128.