Hot deformation mechanisms of a solution-treated AI-Li-Cu-Mg-Zr alloy

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 27, Issue 11, 1996, Pages 3478-3490

  Avramovic Cingara, G ^a   Perovic, D D ^b   McQueen, H J ^a  

^a UNIVERSITY OF TORONTO   (Canada)

^b Gina Cody School of Engineering and Computer Science   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

ACTIVATION ENERGY; DISLOCATIONS (CRYSTALS); GRAIN SIZE AND SHAPE; HEAT TREATMENT; METALLOGRAPHIC MICROSTRUCTURE; PLASTIC DEFORMATION; STRAIN RATE; THERMAL EFFECTS; TORSION TESTING; TRANSMISSION ELECTRON MICROSCOPY; VISCOUS FLOW;

HOT DEFORMATION MECHANISMS; SOLUTION TREATED ALUMINUM BASED ALLOYS;

ALUMINUM ALLOYS;

EID: 0030286647     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02595440     Document Type: Article

References (56)

1. M.A. Reynolds, A. Gray, E. Creed, R.M. Jordan, and A.P. Titchener: in Aluminium-Lithium Alloys HI, C. Baker, P.J. Gregson, S.J. Harris, and C.J. Peel, eds., Oxford, Institute of Metals, London, 1986, pp. 57-65.
2. J. Wadsworth, A.R. Pelton, and R.E. Lewis: Metall. Trans. A, 1985, vol. 16A, pp. 2319-32.
3. V.S. Miller, J. White, and D.J. Lloyd: in Aluminum Alloys Physical and Mechanical Properties, E.A. Starke and T.H. Sanders, eds., Engineering Materials Advisory Service, Worley, United Kingdom, 1986, vol. 1, pp. 1799-1836.
4. T.H. Sanders and E.A. Starke: Proc. 5th Int. Aluminium Lithium Conf., T.H. Sanders and E.A. Starke, eds., Materials and Component Engineering Publications, Birmingham, United Kingdom, 1989, pp. 1-37.
5. I.C. Smith, G. Avramovic-Cingara, and H.J. McQueen: Proc. 5th Int. Aluminium Lithium Alloys Conf., Williamsburg, VA, T.H. Sanders and E.A. Starke, eds., Materials and Component Engineering Publications, Birmingham, United Kingdom, 1989, pp. 223-32.
6. G. Avramovic-Cingara, H.J. McQueen, and G. L'Esperance: Eur. Conf. of Advanced Materials and Processes, Federation of European Materials Societies, pp. 1305-10.
7. G. Avramovic-Cingara and H.J. McQueen: Proc. Int. Conf. on Advanced Aluminium and Magnesium Alloys, Amsterdam, 1990, ASM International, Materials Park, OH, 1990, pp. 223-30.
8. G. Avramovic-Cingara and H.J. McQueen: in The Strength of Metals and Alloys, (ICSMA 9), Haifa, Israel, D.O. Brandon, R. Chaim, and A. Rosen, eds., 1991, pp. 255-62.
9. H.J. McQueen: in Hot Deformation of Aluminium Alloys, T.G. Langdon, H.D. Merchant, J.G. Morris, and M.A. Zaidi, eds., TMSAIME, Warrendale, PA, 1991, pp. 31-54.
10. G. Avramovic-Cingara, H.J. McQueen, A. Hopkins, V. Jajin, and D.D. Perovic: 1995 TMS Annual Meeting: Lighfiveight Alloys for Aerospace Applications, Las Vegas, NV, E.W. Lee, N.J. Kim, K.V. Jata, and W.E.' Frazier, eds., TMS, Warrendale, PA, 1995. pp. 33347.
11. M. Nikura, H. Takahashi, and C. Ouchi: in Aluminium-Lithium Alloys III, C. Baker, P.J. Gregson, S.J. Harris, and C.J. Peel, eds., Institute of Metals, London, 1986, pp. 213-21.
12. H.J. McQueen and J.J. Jonas: 2nd Int. Conf. on Aluminum AlloysTheir Physical and Mechanical Properties, C.Q. Chen and E.A. Starke, eds., International Academic Publishers, Beijing, 1990, pp. 727-42.
13. M. Goncalves and C.M. Sellars: 6th Int. Aluminium-Lithium Conf., M. Peters and P.J. Winkler, eds., Garmisch-Partenkirchen, DGM Informationgeselschaft mbH, OberurescI, Germany, 1992, vol. 1, pp. 457-61.
14. G. Avramovic-Cingara, H.J. McQueen, A. Salama, and T.R. McNelly: Scripta Metall., 1989, vol. 23, pp. 273-78.
15. G. Avramovic-Cingara, P. Sakaris, and H.J. McQueen: 24th Int. SAMPE Tech. Conf., F.H. Froes and W. Wallace, eds., Toronto, SAMPE, Covina, CA, 1992, pp. 402-13.
16. G. Avramovic-Cingara, K.T. Aust, D.D. Perovic, G. Palumbo, and H.J. McQueen: Can. Metall. Q., 1995, vol. 34(3), pp. 265-73.
17. T. Sheppard: 2nd Int. Conf. on Aluminium Alloys-Their Physical and Mechanical Properties, C.Q. Chen and E.A. Starke, eds., International Academic Publishers, Beijing, 1990, pp. 744-54.
18. X. Xiaoxin: Scripta Metall., 1992, vol. 26, pp. 1587-92.
19. M. Kanno and B.L. Ou: 6th Int. Aluminium-Lithium Conf, M. Peters, and PJ. Winkler, eds.,Garmisch-Partenkirchen, DGM Informationgeselschaft mbH, Oberuresel, Germany, 1992, pp. 89-94.
20. K. Conrod and H.J. McQueen: in Aluminium Alloys, Physical and Mechanical Properties, E.A. Starke and T.H. Sanders, eds., Engineering Materials Advisory Service, Warley, United Kingdom, 1986, vol. 1, pp. 435-47.
21. Szknimelak, K. Conrod, and H.J. McQueen: Aluminium, 1988, vol. 64, pp. 1151-56.
22. H.J. McQueen, K. Conrod, and G. Avramovic-Cingara: Can. Metall. Q., 1993, vol. 32, pp. 375-86.
23. H.J. McQueen and J.E. Hockett: Metall. Trans. A, 1970, vol. 1, pp. 2997-3004.
24. G. Avramovic-Cingara and H.J. McQueen: Pract. Metallogr., 1993, vol. 1, pp. 25-39.
25. G. Avramovic-Cingara and H.J. McQueen: Aluminium, 1994, 70 (3-4), pp. 214-19.
26. H.J. McQueen and J.J. Jonas: J. Appl. Metalwork, 1984, vol. 3, pp. 233-41.
27. H.J. McQueen and J.J. Jonas: J. Appl. Metalwork, 1985, vol. 3, pp. 410-21.
28. G.V. Gayle and J.B. Vandersande: Scripta Metall, 1984, vol. 18, pp. 473-78.
29. E. Nes and H. Bildal: Acta Metall., 1977, vol. 25, pp. 1039-46.
30. M.F. Ashby and L.M. Brown: Phil. Mag., 1963, No. 8, pp. 1083-1103. I
31. R.W.K. Honeycombs: The Plastic Deformation of Metals, Edward Arnold, London, 1977, p. 363. 1
32. A.F. Smith: Mater. Sei. Technol, 1989, vol. 5, pp. 533-40. j
33. J.P. Hirth and J. Lothe: Tlieory of Dislocations, Wiley, New York, 1 NY, 1982, p. 623.
34. H.M. Flower and P.J. Gregson: Mater. Sei. Eng., 1987, vol. 3, pp. ; 81-90.
35. P. Meyer and B. Dubost: Aluminium-Lithium Alloys III, C. Baker, P.J. Gregson, S.J. Harris, and C.J. Peel, eds., Oxford, Institute of Metals, , London, 1986, pp. 37-46.
36. D. Shechtman and LA. Blech: Metall. Trans. A, 1984, vol. 16A, pp. i 1005-12. . ,
37. M.D. Ball and H. Lagace: in Aluminium-Lithium Alloys III, C. Baker, P.J. Gregson, S.J. Harris, and C.J. Peel, eds., Oxford, Institute of Metals, London, 1986, pp. 555-64.
38. K.K. Sankaran, J.E. O'Neal, and S.M.L. Sastry: Metall. Trans. A, ' 1983, vol. 14A, pp. 2174-78. :
39. P.J. Gregson, H.M. Flower, C.N. Tite, and A.K. Mukhopadhyay: Mater. Sei. Technol., 1986, vol. 2, pp. 349-53.
40. E.A. Ludwiczak and R.J. Rioja: J. Mater. Sei., 1992, vol. 27, pp. 4842-46.
41. R.J. Rioja and E.A. Ludwiczak: in Aluminium-Lithium Alloys III, C. Baker, P.J. Gregson, S.J. Harris, and C.J. Peel, eds., Oxford, Institute of Metals, London, 1986, pp. 471-82.
42. H.K. Hardy and J.M. Silcock: J. Inst. Met., 1955-56, vol. 84, pp. 42329.
43. J.C. Huan and A.J. Ardell: Mater. Sei. Technol, 1987, vol. 3, pp. 176-88.
44. O. Novitovic, G. Avramovic-Cingara, and M. Rogulic: 6th Etir. Congr. of Stereology, Prague, 1993, vol. IV, pp. 10-11.
45. G. Avramovic-Cingara, I.C. Smith, and H.J. McQueen: Dispersion Strengthened Aluminium Alloys, TMS-AIME Conf, Y.W. Kim and W. Griffith, eds., TMS-AIME, Warrendale, PA, 1988, pp. 437-50.
46. H.J. McQueen, H. Chia, and E.A. Starke: in Microstriictural Control in Aluminium Alloys Processing, E.H. Chia and H.J. McQueen, eds., TMS-AIME, Warrendale, PA, 1986, pp. 1-18.
47. H.J. McQueen, E. Evangelista, G. Crawford, and J. Bowles: Met. Sei., 1984, vol. 18, pp. 395-402.
48. E. Evangelista, H.J. McQueen, and E. Bonetti: Deformation of Multiphase and Particle Containing Materials, J. Bilde-Sorenson, N. Hansen, and A. Horsewell, eds., Riso National Laboratory, Roskilde, Denmark, 1983, pp. 243-50.
49. T. Sheppard, M.J. Tan, H.M. Flower, and A.K. Mukhopadhyay: Proc. 4th Int. Al Extrusion Sem., Aluminium Association, Washington, D.C., 1988, vol. 2, pp. 161-70.
50. M.H. Skillinberg and R.F. Ashton: 4th Int. Al Extrusion Seminar, Aluminium Association, Washington, D.C., 1988, vol. 2, pp. 161-70.
51. B.P. Gu and G.L. Liedl: Mater. Sei. Eng., 1985, vol. 76, pp. 147-57.
52. P.J. Gregson, K. Dinsdale, S.J. Harris, and B. Noble: Mater. Sei. Eng., 1987, vol. 3, pp. 7-13.
53. G. Avramovic-Cingara: Ph.D. Thesis, University of Belgrade, Belgrade, 1984, p. 124.
54. G. Avramovic-Cingara and G. Zupunski: J. Fac. Eng. Sei., Novi Sad, 1982, vol. 12, pp. 1-10.
55. R.W. Evans and G.R. Dunstan: J. Inst. Met., 1971, vol. 99, pp. 4-14.
56. G. Avramovic-Cingara, A. Hopkins, H.J. McQueen, and D.D. Perovic: 4th Int. Conf. on Aluminium Alloys (ICAA4), Georgia Institute of Technology, Atlanta, GA, T.H. Sanders and E.A. Starke, eds., vol. II, pp. 258-65.