State of the art of tooth-colored restoratives

Operative Dentistry

Volumn 21, Issue 6, 1996, Pages 237-248

  Lutz, F ^a  

^a UNIVERSITY OF ZURICH   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

DENTAL ALLOY; GLASS IONOMER; RESIN;

CHEMISTRY; COMPARATIVE STUDY; DENTAL SURGERY; ENDODONTICS; HUMAN; METHODOLOGY; PATIENT CARE PLANNING; REVIEW;

COMPOSITE RESINS; DENTAL AMALGAM; DENTAL CAVITY PREPARATION; DENTAL RESTORATION, PERMANENT; GLASS IONOMER CEMENTS; HUMANS; INLAYS; MARGINAL ADAPTATION (DENTISTRY); PATIENT CARE PLANNING;

EID: 0030275416     PISSN: 03617734     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (94)

1. AIDA M, HAYAKAWA T & MIZUKAWA K (1995) Adhesion of composite to porcelain with various surface conditions Journal of Prosthetic Dentistry 73 464-470.
2. AIROLDI RL, KREJCI I & LUTZ F (1992) In vitro evaluation of dentinal bonding agents in mixed Class V cavity preparations Quintessence International 23 355-362.
3. BAILLOD R, KREJCI I & LUTZ F (1994) "Adhasive Frontzahnrestorationen" unter Dentinadhasivanwendung mit und ohne Unterfüllung Schweizerische Monatsschrift für Zahnmedizin 104 290-296.
4. BARBAKOW F, ACKERMANN M, KREJCI I & LUTZ F (1994) Amalgam als Mass in der Füllungstherapie Schweizerische Monatsschrift für Zahnmedizin 104 1341-1350.
5. BERRY TG, BARGHI N, GODWIN, JM & HUNTER K (1992) Measurement of intensity of curing light units in dental offices Journal of Dental Research 71 Abstracts of Papers p 161 Abstract 442.
6. BIAM (Deutsches Bundesinstitut für Arzneimittal und Medizinalprodukte) (1994) Offentliche Expertenanhorung am 9.12.1994 zu dem Thema Amalgam Proceedings Berlin: BIAM.
7. BURROW MF, HAYASHIDA M, NEGISHI T, NIKAIDO T, TAGAMI J, TAKATSU T & HOSODA H (1993) Tensile bond strength and curing gap formation of a dentin bonding resin Dental Materials Journal 12 97-105.
8. BURTSCHER P (1993) Stability of radicals in cured composite materials Dental Materials 9 218-221.
9. CRIM GA (1993) Marginal leakage of visible light-cured glass ionomer restorative materials Journal of Prosthetic Dentistry 69 561-563.
10. CROLL TP & HELPIN ML (1995) Class II vitremer restoration of primary molars Journal of Dentistry for Children 62 17-21.
11. CROLL TP, KILLIAN CM & HELPIN ML (1993) A restorative dentistry renaissance for children: light-hardened glass ionomer/resin cement ASDC Journal of Dentistry for Children 60 89-94.
12. DUKE ES, ROBBINS JW & TREVIÑO D (1994) The clinical performance of a new adhesive resin system in Class V and IV restorations Compendium 15 852-864.
13. ELDERTON RJ, ABOUSH YEY, VOWLES RW, BELL CJ & MARSHALL KJ (1995) Clinical investigation of K 71 VLC Industrial Report, DeTrey, Konstanz.
14. FERRARI M, YAMAMOTO K, VICHI A & FINGER WJ (1994) Clinical and laboratory evaluation of adhesive restorative systems American Journal of Dentistry 7 217-219.
15. FLESSA H-P, KUNZELMANN K-H, NEUBAUER J & HICKEL R (1994) Randschluss zervikaler Füllungen bei verschiedenen Füllungstechniken Deutsche Zahnarztliche Zeitschrift 49 800-804.
16. FLESSA H-P, KUNZELMANN K-H, VON KNOERZER H & HICKEL R (1995) Marginal seal of light-curing glass ionomer cements and Dyract in class V cavities Journal of Dental Research 74 Abstracts of Papers p 18 Abstract 53.
17. FOWLER CS, SWARTZ ML & MOORE BK (1994) Efficacy testing of visible-light-curing units Operative Dentistry 19 47-52.
18. GSCHALL H-P (1995) Zahnfarbene Seitenzahnrestau-rationen - Eine Nachuntersuchung von studentischen Arbeiten Thesis Zurich.
19. HANSEN EK (1992) Five-year study of cervical erosions restored with resin and dentin-bonding agent Scandinavian Journal of Dental Research 100 244-247.
20. HARNIRATTISAI C, INOKOSHI S, SHIMADA Y & HOSODA H (1993) Adhesive interface between resin and etched dentin of cervical erosion/abrasion lesions Operative Dentistry 18 138-143.
21. IMAI Y & SUZUKI A (1994) Effects of water and carboxylic acid monomer on polymerization of HEMA in the presence of N-phenylglycine Dental Materials 10 275-211.
22. IMAZATO S, TORII M, TSUCHITANI Y, McCABE JF & RUSSELL RR (1994) Incorporation of bacterial inhibitor into resin composite Journal of Dental Research 13 1437-1443.
23. JEDYNAKIEWICZ NM, MARTIN N & FLETCHER JM (1995) Clinical investigation of Dyract for class V cavities Industrial Report DeTrey, Konstanz.
24. JUNG M (1995) Vergleichende Oberflachenbearbeitung lichthartender Glasionomer-Füllungsmaterialien Deutsche Zahnarztliche Zeitschrift 50 160-163.
25. KREJCI I (1992) Zahnfarbene Restaurationen: Qualität, Potential and Indikationen Munchen/Wien: Hanser.
26. KREJCI I, BESEK M & LUTZ F (1994a) Clinical and SEM study of Tetric resin composite in posterior teeth: 12-month results American Journal of Dentistry 7 27-30.
27. KREJCI I, FULLEMANN J & LUTZ F (1994b) Klinische and rasterelektronenmikroskopische Langzeituntersuchung von Kompositinlays Schweizerische Monatsschrift für Zahnmedizin 104 1351-1356.
28. KREJCI I, GEBAUER L, HAUSLER T & LUTZ F (1994c) Kompomere - Amalgamersatz für Milchzahnkavitaten? Schweizerische Monatsschrift für Zahnmedizin 104 724-730.
29. KREJCI I, GUNTERT A & LUTZ F (1994d) Scanning electron microscopic and clinical examination of composite resin inlays/onlays up to 12 months in situ Quintessence International 25 403-409.
30. KREJCI I, KREJCI D & LUTZ F (1992a) Clinical evaluation of a new pressed glass ceramic inlay material over 1.5 years Quintessence International 23 1 81-86.
31. KREJCI I, KUSTER M & LUTZ F (1993a) Influence of dentinal fluid and stress on marginal adaptation of resin composites Journal of Dental Research 72 490-494.
32. KREJCI I & LUTZ F (1995) Zahnfarbene adhasive Restaurationen im Seitenzahnbereich Zurich: PPK.
33. KREJCI I, LUTZ F & BORETTI R (1996) Composite polishing with a new abrasive brush Journal of Dentistry (submitted for publication).
34. KREJCI I, LUTZ F & GAUTSCHI L (1994e) Wear and marginal adaptation of composite resin inlays Journal of Prosthetic Dentistry 72 233-244.
35. KREJCI I, LUTZ F & KREJCI D (1988) The influence of different base materials on marginal adaptation and wear of conventional Class II composite resin restorations Quintessence International 19 191-198.
36. KREJCI I, LUTZ F & PERISIC U (1992b) Auswirkungen der Verarbeitungstechnik auf die Dentinhaftung Schweizerische Monatsschrift für Zahnmedizin 102 924-929.
37. KREJCI I, LUTZ F & REIMER M (1993b) Marginal adaptation and fit of adhesive ceramic inlays Journal of Dentistry 21 39-46.
38. KREJCI I, ODDERA M & LUTZ F (1996) SEM and clinical evaluation of a dentinal adhesive in mixed class V restorations after 6, 12 and 24 months in situ Dental Materials (accepted for publication).
39. LANG H, SCHWAN R & NOLDEN R (1994) Die Verformung gefullter Zahne Deutsche Zahnarztliche Zeitschrift 49 812-815.
40. LEE S-Y, CHIU C-H, BOGHOSIAN A & GREENER EH (1993) Radiometric and spectroradiometric comparison of power outputs of five visible light-curing units Journal of Dentistry 21 373-377.
41. LOHRER CH (1992) Evaluation neuer Kavitatenformen für Kompositfüllungen der Klasse 11 Thesis Zurich: Dental School.
42. LUTZ F (1975) Die adhasive Restoration - Der Weg zur unsichtbaren Füllung? Zahnarztliche Praxis 26 51-55.
43. LUTZ F & BURKART R (1974) Das Concise-Enamel-Bond-System, eine Alternative? Schweizerische Monatsschrift für Zahnheilkunde 84 1113-1129.
44. LUTZ F & KREJCI I (1993) Direct posterior filling materials In State of the Art on Posterior Filling Materials and Denline Bonding pp15-28 Leaven: Van der Poorten.
45. LUTZ F & KREJCI I (1994) Mesio-ooclusodistal amalgam restorations: quantitative in vivo data up to 4 years. A data base for the development of amalgam substitutes. Quintessence International 25 185-190.
46. LUTZ F, KREJCI I & BARBAKOW F (1992a) The importance of proximal curing in posterior composite resin restorations Quintessence International 23 605-607.
47. LUTZ F, KREJCI I & BARBAKOW F (1992b) Restoration quality in relation to wedge-mediated light channeling Quintessence International 23 763-767.
48. LUTZ F, KREJCI I & FRISCHKNECHT A (1992c) Lichtpolymerisationsgerate Schweizerische Monatsschrift für Zahnmedizin 102 564-573.
49. LUTZ F, KREJCI I & FRISCHKNECHT A (1992d) Lichtpolymerisation Schweizerische Monatsschrift für Zahnmedizin 102 574-588.
50. LUTZ F, KREJCI I & OLDENBURG TR (1986) Elimination of polymerization stresses at the margins of posterior composite resin restorations: a new restorative technique Quintessence International 17 777-784.
51. LUTZ F, KREJCI I & SCHUPBACH P (1993) Adhasivsysteme für zahnfarbene Restaurationen Schweizerische Monatsschrift für Zahnmedizin 103 537-549.
52. LUTZ F, LUSCHER B, OCHSENBEIN H & MUHLEMANN HR (1976a) Die Entwicklung der perfekt adaptierten, randspaltfreien MOD-Kompositfüllung, In-vitro-Befunde Schweizerische Monatsschrift für Zahnheilkunde 86 1025-1041.
53. LUTZ F, LUSCHER B, OCHSENBEIN H & MUHLEMANN HR (1976b) Adhasive Zahnheilkunde Zurich: Juris.
54. LUTZ F, SETCOS JC & PHILLIPS RW (1983) New finishing instruments for composite resins Journal of the American Dental Association 107 575-580.
55. MANGUM FI Jr, BERRY EA, DeSCHEPPER E & RIEGER MR (1994) Microleakage of incremental versus compression matrix bulk filling of cervical resin composite restorations General Dentistry 42 304-308.
56. MANTE F, SALEH N & MANTE M (1993) Softening patterns of post-cure heat-treated dental composites Dental Materials 9 325-331.
57. MARTI ST, KREJCI I & LUTZ F (1996) Verschleiss und marginale Adaptation von Adhasiv-Inlays aus hydrothermalen Werkstoffen Acta Medicinae Dentium Helvetica (accepted for publication).
58. McCABE JF & RUSBY S (1994) Dentine bonding - the effect of pre-curing the bonding resin British Dental Journal 176 333-336.
59. McLEAN JW, NICHOLSON JW & WILSON AD (1994) Proposed nomenclature for glass-ionomer dental cements and related materials Quintessence International 25 587-589.
60. MORMANN W & KREJCI I (1992) Computer-designed inlays after 5 years in situ: clinical performance and scanning electron microscopic evaluation Quintessence International 23 109-115.
61. ORAM DA & PEARSON GJ (1994) A survey of current practice into the use of aesthetic inlays British Dental Journal 176 457-462.
62. ÖZDEN AN, AKALTAN F & CAN G (1994) Effect of surface treatments of porcelain on the shear bond strength of applied dual-cured cement Journal of Prosthetic Dentistry 72 85-88.
63. PIRES JA, CVITKO E, DENEHY GE & SWIFT EJ (1993) Effects of curing tip distance on light intensity and composite resin microhardness Quintessence International 24 517-521.
64. PORTE A, LUTZ F, LUND MR, SWARTZ ML & COCHRAN MA (1984) Cavity designs for composite resins Operative Dentistry 9 50-56.
65. POWERS JM & YOU C (1995) Bonding to dentin treated with acidic primer/adhesive containing PENTA Journal of Dental Research 74 Abstracts of Papers p 34 Abstract 183.
66. REICH E & VOLKL H (1994) Randqualität von Zahnhalsfüllung aus lichthartenden Glasionomerzementen Deutschen Zahnartzliche Zeitschrift 49 163-166.
67. RELLER U, GEIGER F & LUTZ F (1989) Quantitative investigation of different finishing methods in conventional cavity preparations Quintessence International 20 453-460.
68. ROETERS FJM (1995) Clinical investigation of restorative material K 71 Industrial Report DeTrey, Konstanz.
69. RUEGGEBERG FA (1993) Precision of hand-held dental radiometers Quintessence International 24 391-396.
70. RUEGGEBERG FA, CAUGHMAN WF & CURTIS JW Jr (1994a) Effect of light intensity and exposure duration on cure of resin composite Operative Dentistry 19 26-32.
71. RUEGGEBERG FA, CAUGHMAN WF, CURTIS JW Jr & DAVIS HC (1994b) A predictive model for the polymerization of photo-activated resin composites International Journal of Prosthodontics 1 159-166.
72. RUSZ JE, ANTONUCCI JM, EICHMILLER F & ANDERSON MH (1992) Adhesive properties of modified glass-ionomer cements Dental Materials 8 31-36.
73. RYGE G & CVAR JF (1971) Criteria for the clinical evaluation of dental restorative materials US Public Health Service Publication No 790-244 San Francisco: Government Printing Office.
74. SAGESSER D & KREJCI I (1992) Der Einsatz von Kompomer K-71 in grossen, konventionellen Seitenzahnkavitaten - eine In-vitro-Untersuchung Industrial Report Zurich University: PPK.
75. SCHUEPBACH P, KREJCI I & LUTZ F (1994) The resin-dentin hybrid layer: comparative SEM, TEM, and confocal microscopic examination Journal of Dental Research 73 Abstracts of Papers p 107 Abstract 42.
76. SHINKAI K, SUZUKI S, LEINFELDER KF & KATOH Y (1994) How heat treatment and thermal cycling affect wear of composite resin inlays Journal of the American Dental Association 125 1467-1472.
77. SIDHU SK & WATSON TF (1995) Resin-modified glass ionomer materials American Journal of Dentistry 8 59-67.
78. SKALAK R (1983) Biomechanical considerations in osseointegrated prostheses Journal of Prosthetic Dentistry 49 843-848.
79. SORENSEN JA & MUNKSGAARD EC (1995) Ceramic inlay movement during polymerization of resin luting cements European Journal of Oral Science 103 186-189.
80. STOKES AN, TAY WM & PEREIRA BP (1993) Shear bond of resin cement to post-cured hybrid composites Dental Materials 9 370-374.
81. SUZUKI S & LEINFELDER KF (1993) Localized wear and marginal integrity of posterior resin composites American Journal of Dentistry 6 199-203.
82. SWIFT EJ Jr, PERDIGAO J & HEYMANN HO (1995) Bonding to enamel and dentin: a brief history and state of the art, 1995 Quintessence International 26 95-110.
83. TATE WH, DeSCHEPPER EJ & POWERS JM (1993) Bond strength of resin cements to a hybrid composite American Journal of Dentistry 6 195-198.
84. THURMOND JW, BARKMEIER WW & WILWERDING TM (1994) Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain Journal of Prosthetic Dentistry 72 355-359.
85. TRIANA R, PRADO C, GARRO J & GARCÍA-GODOY F (1994) Dentin bond strength of fluoride-releasing materials American Journal of Dentistry 7 252-254.
86. UNO S & SHIMOKOBE H (1994) Contraction stress and marginal adaptation of composite restorations in dentinal cavity Dental Materials Journal 13 19-24.
87. UNTERBRINK GL & MUESSNER R (1995) Influence of light intensity on two restorative systems Journal of Dentistry 23 183-189.
88. VAN MEERBEEK B, PEUMANS M, VERSCHUEREN M, GLADYS S, BRAEM M, LAMBRECHTS P & VANHERLE G (1994) Clinical status of ten dentin adhesive systems Journal of Dental Research 73 1690-1702.
89. WATTS DC (1992) Kinetic mechanisms of visible-light-cured resins and resin-composites: Setting mechanisms of dental materials Transactions of the Academy of Dental Materials 80-112.
90. WATTS DC (1994) Elastic moduli and visco-elastic relaxation Journal of Dentistry 22 154-158.
91. WENDT SL Jr (1987) The effect of heat used as secondary cure upon the physical properties of three composite resins II Wear, hardness, and color stability Quintessence International 18 351-356.
92. WOJTEK R, WERNISCH J & WIEDERSCHWINGER H (1993) Vergleichende Untersuchung hinsichtlich Aushartezeit an lichthartenden Komposits Zeitschrift für Stomatologie 90 187-201.
93. YANAGAWA T & FINGER WF (1994) Relationship between degree of polymerization of resin composite and bond strength to Gluma-treated dentin American Journal of Dentistry 7 157-160.
94. YOSHIDA K, GREENER EH & LAUTENSCHLAGER EP (1993) Shear bond strengths of two luting cements to laboratory-cured prosthetic resin composite American Journal of Dentistry 6 13-16.