Some aspects of freeze drying of dairy biomaterials

Drying Technology

Volumn 14, Issue 9, 1996, Pages 1967-2002

  Nastaj, J F ^a  

^a WEST POMERANIAN UNIVERSITY OF TECHNOLOGY   (Poland)

Author keywords

Biomaterials quality estimations; Contact radiant heating; Dairy biomaterials viability; Mathematical model; Process biomaterial parameters; Vacuum freeze drying

Indexed keywords

BACTERIA; BIOMATERIALS; FREEZING; HEAT TRANSFER; MATHEMATICAL MODELS; PHYSICAL PROPERTIES; SUBLIMATION; VACCINES; VACUUM;

BIOLOGICAL PROPERTIES; CAKING; CONDUCTIVE HEATING; DAIRY BIOMATERIALS; DAIRY VACCINE; FREEZE DRYING; RADIATIVE HEATING; SCRAPING; SUPPLENESS; SYNTHETIC QUALITY CRITERION;

DRYING;

EID: 0030269869     PISSN: 07373937     EISSN: None     Source Type: Journal    
DOI: 10.1080/07373939608917192     Document Type: Article

References (78)

1. Strumillo, C., Markowski, A. and Adamiec J., 1991, Selected Aspects of Drying of Biotechnological Products, Drying'91, edited by A.S. Mujumdar, Elsevier Science Publisher, Amsterdam, pp. 36-55.
2. Adamiec, J., Kudra, T., and Strumillo, C., 1990, Conservation of Bio-Active Materials by Dehydration, Drying of Solids, edited by A.S. Mujumdar, Santa Prakashan Publishers, Meerut-New Delhi, pp. 1-16.
3. Strumillo, C., Grabowski, S., Zbicinski,I. and Bartczak, Z., 1988, Choice of Dryer for Biosynthesis Products, Sixth International Drying Symposium IDS'88, Versailles, vol.2 PD. 17-23.
4. Strumillo, C., Grabowski, S., Kaminski, W. and Zbicinski, I., 1989, Simulation of Fluidized Bed Drying of of Biosynthesis Products, Chem. Eng. Process, 26(2) pp. 139-145.
5. Karel, M. and Flink, J.M., 1983, Some Recent Developments in Food Dehydration Research, Advances in Drying, vol. 2, edited by A.S. Mujumdar, Hemisphere Publishing Corporation, Washington, pp. 103-153.
6. King, C. J., 1984, Control of Food-Quality Factors in Spray Drying, Proc. Fourth International Drying Symposium IDS'84, Kyoto, vol. 1, pp. 69-76.
7. Karel, M., 1990, Physical Structure and Quality of Dehydrated Foods , Proc. Seventh International Drying Symposium IDS'90, Prague,Paper No. [1251].
8. Karel, M., 1992, Optimization of Quality of Dehydrated Foods and Biomaterials, Drying'92, edited by A.S. Mujumdar, Elsevier Science Publishers, Amsterdam, pp. 3-16.
9. Genskow, L.R., 1988, Consideration in Drying Consumer Products, Proc. Sixth International Drying Symposium IDS'88, Versailles, vol. 2, KL. 39-46.
10. Lin, S. and Chou, T., 1982, The Control Characreristics of the Sublimation Process for Preservation of Activities of Biological Substances, Drying'82, edited by A.S. Mujumdar, Hemisphere Publishing Corporation, Washington, pp. 201-207.
11. Bruin, S. and Luyben K., 1980, Drying of Food Materials: A Review of Recent Developments, Advances in Drying, vol. 1, edited by A. S.. Mujumdar, Hemisphere Publishing Corporation, Washington, pp. 155-215.
12. Upadhyaya, R.L. and Kilara, A., 1984, Drying Heat Sensitive Products, Proc Fourth International Drying Symposium IDS'84, Kyoto, vol. 1, pp. 316-321.
13. Tutova, E.G., 1982, Heat Engineering Principles of Drying Microbiological Materials, Proc. Third International Drying Symposium IDS'82, Birmingham, vol. 2, pp. 239-251.
14. Tutova, E.G., 1981, Heat Engineering Specificity of the Dehydration Technology of Thermo-Labile and Moisture-Labile Materials, Inzh. Fiz. Zh., 40 pp. 296-303.
15. Wolff, E., Delisle, B., Corrieu, G. and Gilbert, H., 1990, Freeze-Drying of Streptococcus Thermophilus: A Comparison Between the Vacuum and the Atmospheric Technique, Cryobiology, 27, pp. 569-575.
16. Nastaj, J., 1994, Vacuum Contact Drying of Selected Biotechnology Products, Drying Technology, 12(5) pp. 1145-1166
17. Karel, M., 1990, Advances in Improving Product Quality by Controlling Conditions of Processing and Storage, In: Engineering and Food, vol. 1, edited by Spiess, W. and Schubert, H., Elsevier Science Publisher, Amsterdam, pp. 22-30.
18. Nastaj, J., 1991, A Mathematical Modelling of Heat Transfer in Freeze Drying, Drying'91, edited by A.S. Mujumdar and I. Filková, Elsevier Science Publisher, Amsterdam, pp. 405-413.
19. Nastaj, J. and Strȩk, F., 1989, Doskonalenie procesów biotechnologicznych (Progress in Biotechnology), Report No. 04.11/3.18, - Part IV, Szczecin Tech. Univ., Szczecin, Poland.
20. Nastaj, J. and Walczak, S., 1988, Vacuum Contact Drying of the Biomaterials, Proc. Sixth International Drying Symposium IDS'88, Versailles, vol. 2, PE. 25-31.
21. Wijlhuizen, A.E., Kerkhof, A.M. and Bruin, S., 1979, Theoretical Study of The Inactivation of Phosphatase During Spray Drying of Skim-Milk, Chem. Eng. Sci., 34, pp. 651-660.
22. Wolff, E. and Gilbert, H., 1989, Vacuum Freeze-Drying Kinetics and Modelling of a Liquid in a Vial, Chem. Eng. Process., 25 pp. 153-158.
23. Wolff, E. and Gilbert, H., 1990, A Comparison Between Vacuum Freeze-Drying and Atmospheric Freeze-Drying, In: Engineering and Food, vol. 2, edited by Spiess, W. and Schubert, H., Elsevier Science Publisher, Amsterdam, pp. 741-750.
24. Chen, X.D., 1994, Towards a Comprehensive Model Based Control of Milk Drying Processes, Drying Technology, 12(5) pp. 1105-1130.
25. Písecký, J., 1985, The Manufacture of Non-caking Whey Powder by the Straight-Through Process, Niro Atomizer Report No. F-214.
26. Rawson, N. and Mahoney, R.R., 1983, Effect of Processing and Storage on the Protein Quality of Spray-Dried Lactose-Hydrolysed Milk Powder, Lebensm.-Wiss- u. -Technol., 16, pp. 313-316.
27. MacKenzie, A.P., 1975, Collapse During Freeze Drying - Qualitative and Quantitative Aspects, In: Freeze Drying and Advanced Food Technology, edited by S.A. Goldbith et al., Academic Press, New York, pp. 277-303.
28. Flink, J., 1975, The Influence of Freezing Conditions on the Properties of Freeze Dried Coffee, In: Freeze Drying and Advanced Food Technology, edited by S.A. Goldblith et al., Academic Press, New York, pp. 143-160.
29. Flink, J., 1974, Properties of the Freeze-Drying "Scorch" Temperature, J. of Food Science, 39 pp. 1244-1246.
30. Hayes, L.J., Diller, K.R., Lee, H.S. and Baxter, C.R., 1984, On the Definition of an Average Cooling Rate During Cell Freezing, Cryo-Letters 5, pp. 97-110.
31. Wollhöver, K., Scheiwe, M.W., Hartmann, U. and Körber, Ch., 1985, On Morfological Stability of Planar Phase Boundaries During Unidirectional Transient Solidification of Binary Aqueous Solutions, Int. J. Heat Mass Transfer 28, pp. 897-902.
32. Körber, Ch.,1988 , Phenomena at the Advancing Ice-Liquid Interface: Solutes, Particles and Biological Cells, Quart. Rev. Biophys. 21, pp. 229-298.
33. Jochem, M. and Körber, Ch.,1993 , A Numerical Solution of the Coupled Heat and Mass Transfer Problem of Non-planar Solidification and Melting of Aqueous Solutions, Wörme- und Stoffübertragung 28, pp. 195-204.
34. Kochs, M., Körber, Ch., Nunner, B. and Heschel, I., 1991, The Influence of the Freezing Process on Vapour Transport During Sublimation in Vacuum Freeze Drying, Int. J. Heat Mass Transfer 34, pp. 2395-2408.
35. Goldblith, S.A., Rey, L. and Rothmayr (Editors), W.W., 1975, Freeze Drying and Advanced Food Technology, Academic Press, New York, 875 pp.
36. Mellor, J.D., 1978, Fundamentals of Freeze Drying, Academic Press, New York, 366 pp.
37. Schadler, N. and Kast, W., 1987, A Complete Model of the Drying Curve for Porous Bodies - Experimental and Theoretical Studies, Int. J. Heat Mass Transfer 30, pp. 2031-2044.
38. Chen, P. and Pei, D.C., 1989, A Mathematical Model of Drying Processes, Int. J. Heat Mass Transfer 32, pp. 297-310.
39. Donghua, Y. and Ding, Y., 1986, An Exact Solution of the Sublimation Problem in a Porous Medium - Accounting for the Effect of Coupled Heat and Mass Transfer, Proc. Fifth International Drying Symposium IDS'86, Cambridge, Massachusetts, USA, vol.1, pp. 149-156.
40. Lin, S., 1981, An Exact Solution of the Sublimation Problem in a Porous Medium, ASME J. Heat Transfer, vol. 103, pp. 165-168.
41. Lin, S., 1982, An Exact Solution of the Desublimation Problem in a Porous Medium, Int. J. Heat Mass Transfer 25, pp. 625-630.
42. Okazaki, M., Yamasaki, T. and Toei, R., 1982, Prediction of Drying Time of Wet Granular Bed by Conductive-Heating, Proc. Third Internatioanal Drying Symposium IDS'82, Birmingham, vol. 1, pp. 457-466.
43. Ma, Y.H. and Peltre, P.L., 1975, Freeze Dehydration by Microwave Energy: Part I. Theoretical Investigation, AIChE Journal 21, pp. 335-344.
44. Ma, Y.H. and Peltre, P.L., 1975, Freeze Dehydration by Microwave Energy: Part H. Experimental Study, AIChE Journal 21, pp. 344-350.
45. Ma, Y.H. and Arsem, H., 1982, Low Pressure Sublimation in Combined Radiant and Microwave Freeze Drying, Drying'82, edited by A.S. Mujumdar, Hemisphere Publishing Corporation, Washington, pp. 196-200.
46. Fox, E.G. and Thomson, W.J., 1972, Coupled Heat and Mass Transport in Unsteady Sublimation Drying, AIChE Journal 18, pp. 792-797.
47. Kawala, Z., Kapłon, J., Kramkowski, R. and Berdzik, M., 1994, Badania suszenia sublimacyjnego wybranych produktów spozywczych (Freeze Drying Investigations of the Selected Foodstoofe), Przemysł Spozywczy, 5, pp. 134-137.
48. Flink, J.M. and Moledina, K.H., 1982, Freeze Drying at High Temperatures: Product Quality and Drying Characteristics, Proc. Third International Drying Symposium IDS'82, Birmingham, vol. 2, pp. 497-501.
49. Pikal, M.J., Roy, M.L. and Shah, S., 1984, Mass and Heat Transfer in Vial Freeze Drying of Pharmaceuticals: Role of Vial, Journal of Pharmaceutical Sciences, 73 (9) pp. 1234-1237.
50. Fey, Y.C. and Boles, M.A., Effect of Mass Convection on Vacuum Sublimation in an Initially Partially Filled Frozen Porous Medium, 1988, Drying Technology, 6(1) pp. 69-94.
51. Hardin, L.L. and Dyer, D.F., 1973, Heat and Mass Transfer in Beds of Particles Undergoing Sublimation Dehydration, ASME Journal of Heat Transfer, vol. 95, pp. 516-520.
52. Wenur, F., Kamaruddin, A. and Sagara, Y., 1990, Freeze Drying Characteristics andTransport Properties of Shrimp Paste, Proc. Seventh International Drying Symposium IDS'90, Prague, Paper No. [150].
53. Harper, J.C., 1962, Transport Properties of Gases in Porous Media at Reduced Pressures With Reference to Freeze-Drying, AIChE Journal 8, pp. 298-302.
54. Harper, J.C. and El Sahrigi A.F., 1964, Thermal Conductivities of Gas-Filled Porous Solids, Ind. Eng. Chem., Fundamentals, 3, pp. 318-323.
55. Triebes, T.A. and King, C.J., 1966, Factors Influencing the Rate of Heat Conduction in Freeze Drying, Ind. Eng. Chem. Process Design and Development, 5, pp. 430-436.
56. Liapis, A.I. and Litchfield,R.J., 1979, Optimal Control of a Freeze Dryer. I: Theoretical Development and quasisteady-state analysis, Chem. Eng. Sci., 34, pp. 975-981.
57. Litchfield, R.J. and Liapis, A.I., 1982, Optimal Control of a Freeze Dryer. II: Dynamic Analysis, Chem. Eng. Sci., 37, pp. 45-55.
58. Liapis, A.I., 1987, Freeze Drying, In: Handbook of Industrial Drying, edited by A.S. Mujumdar, Hemisphere Publishing Corporation, Washington, pp. 295-326.
59. Litchfield, R.J., Farhadpour, F.A. and Liapis, A.I., 1981, Cyclical Pressure Freeze Drying, Chem. Eng. Sci., 36, pp. 1233-1238.
60. Millman, M.J., Liapis, S.J. and Marchello, J.M., 1984, Guidelines for the Desirable Operation of Batch Freeze Driers During the Removal of Free Water, Journal of Food Technology, 19, pp. 725-738.
61. Greenfield, P.F., 1974, Cyclic-pressure Freeze Drying, Chem. Eng. Sci., 29, pp. 115-122.
62. Dyer, D.F. and Sunderland, J.E., 1971, Freeze Drying of Bodies Subject to Radiation Boundary Conditions, ASME Journal of Heat Transfer, vol. 93, pp. 427-431.
63. Lombrana, J.I. and Diaz, 1987, J.M, Heat Programming to Improve Efficiency in a Batch Freeze-Dryer, The Biochem. Eng. J., 35, pp. B23-31.
64. Lombrana, J.I., Elvira, C.D., Villaran, MC. and Izcara, J., 1993, Simulation and Design of Heating Profiles in Heat Controlled Freeze-Drying of Pharmaceuticals in Vials by the Application of a Sublimation Semispherical Model, Drying Technology 11(3) pp. 471-487.
65. Luikov, A.V. and Lebedev, D.P., 1973, Study of the Ice Sublimation Process, Int. J. Heat Mass Transfer 16, pp. 1087-1096.
66. Krasuk, J.H. and Plachco, F.P., 1974, Sublimation from a Porous Solid of High Thermal Conductivity, Chem. Eng. Sci., 29, pp. 181-189.
67. Shinagawa, H. and Kawamura, Y., 1979, Microstructure and Permeability of Dried Product for Frozen Aqueous Solution, J. Chem. Eng. Japan, 12(5), pp. 406-408.
68. Lebedev, D.P. and Samsonov, V.V., 1972, Kharakter Vneshnego Teplo Massoobmena v Vakuume v Processach Sublimacii, Inzh. Fiz. Zhurnal, 23(3), pp. 1059-1067.
69. Lebedev, D.P., Gerashchenko, O.A., Andreev, E.F., 1973, Teplofizicheskie Onovy Optimizacii Osnovnykh Parametrov Sublimacionnoj Sushki v Vakuume, Inzh. Fiz. Zhurnal, 24(6), pp. 424-429.
70. Lebedev, D.P. and Uvarov, V.V., 1979, Osobennosti Mekhanizma Termoradiacionnqj i Kontaktnoj Sublimacionnoj Sushki v Vakuume, Teoreticheskie Osnovy Khimicheskoj Tekhnologii 13 (6), pp. 825-830.
71. Stotland, D.M., 1980, Raschet Sublimacii Lda iz Dispersnykh Materialov, Teoreticheskie Osnovy Khimicheskoj Tekhnologu 14 (1), pp. 48-53.
72. Sagara, Y. and Hosokawa, A., 1982, Dry Layer Transport Properties and Freeze-Drying Characteristics of Coffee Solutions, Proc Third. International Drying Symposium IDS'82, vol. 2, pp. 487-496.
73. Sagara, J. and Ichiba, J., 1994, Measurement of Transport Properties for the Dried Layer of Coffee Solution Undergoing of Freeze-Drying, Drying Technology, 12(5) pp. 1081-1103.
74. Nastaj, J., 1992, Low-Temperature Vacuum Desorption of a Multicomponent Moisture in Freeze Drying, Drying'92, edited by A.S. Mujumdar, Elsevier Science Publishers, vol. 1, Amsterdam, pp. 374-383.
75. Pijanowski, E., 1984, Zarys chemii i technologii mleczaratwa (An Outline of Dairying Chemistry and Dairy Industry Technology), vol.1, PWRiL, Warazawa, 441 pp.
76. Gawel, J. and Molska, I., 1990, Analiza techniczna w przetwórstwie mleczarskim (Commercial Analysa in Milk Processing), WSziP, Warazawa, 247 pp.
77. Burbianka, M., Pliszka, A. and Burzyńska, H., 1983, Mikrobiologia zywności (Microbiology of Food), PZWL, Warazawa, 539 pp.
78. Gerald, C.F. and Wheatley, P.O., 1989, Applied Numerical Analysis, Addison-Wesley Publishing Company, New York, 679 pp.