Calibration and signal interpretation for single and multiple hot-wire/hot-film probes

Measurement Science and Technology

Volumn 7, Issue 10, 1996, Pages 1313-1333

  Lekakis, I ^a,b,c,d,e,f  

^a UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

^b GEORGE WASHINGTON UNIVERSITY   (United States)

^c UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

^d UNIVERSITY OF IOWA   (United States)

^e IMPERIAL COLLEGE LONDON   (United Kingdom)

^f UNIVERSITY OF THESSALY   (Greece)

Author keywords

[No Author keywords available]

Indexed keywords

CALIBRATION; COMPRESSIBLE FLOW; DIGITAL SIGNAL PROCESSING; ELECTRIC VARIABLES MEASUREMENT; NUMERICAL METHODS; RELIABILITY; SIGNAL PROCESSING; SUBSONIC FLOW; THERMAL EFFECTS;

HOT WIRE ANEMOMETRY; INCOMPRESSIBLE FLOWS; PROBE CALIBRATION; SENSOR RESPONSE EQUATION; SIGNAL INTERPRETATION;

PROBES;

ANEMOMETERS-HOT FILM; ANEMOMETERS-HOT WIRE; FLOW;

EID: 0030268499     PISSN: 09570233     EISSN: None     Source Type: Journal    
DOI: 10.1088/0957-0233/7/10/004     Document Type: Review

References (177)

1. Abdel-Rahman A A, Hitchman G J, Slawson P R and Strong 1989 X-array hot-wire technique for heated turbulent flows of low velocity J. Phys. E: Sci. Instrum. 22 638-44
2. Abdel-Rahman A A, Tropea C, Slawson P R and Strong A B 1987 On temperature compensation in hot-wire anemometry J. Phys. E: Sci. Instrum. 20 315-9
3. Adrian R J, Johnson R E, Jones B G, Merati P and Tung A T-C 1984 Aerodynamic disturbances of hot-wire probes and directional sensitivity J. Phys. E: Sci. Instrum. 17 62-71
4. Al-Beirutty M H and Gessner F B 1989 A hot-wire measurement technique for moderate intensity, skewed turbulent flows 7th Symp. on Turbulent Shear Flows Stanford Univ.
5. Al-Kayiem H H and Bruun H H 1991 Evaluation of a flying X hot-wire probe system Meas. Sci. Technol. 2 374-80
6. Andreopoulos J 1983 Statistical errors associated with probe geometry and turbulence intensity in triple hot wire anemometry J. Phys. E: Sci. Instrum. 16 1264-71
7. Antonia R A, Zhu Y and Kim J 1993 On the measurement of lateral velocity derivatives in turbulent flows Exp. Fluids 15 65-9
8. Azad R S 1993 Effects of hot-wire length and length-diameter ratio on spectral energy of turbulence Meas. Sci. Technol. 9 405-10
9. Azad R S and Kassab S Z 1989 A new method of obtaining dissipation Exp. Fluids 7 81-7
10. Balint J L, Wallace J M and Vukoslavčević P 1991 The velocity and vorticity vector fields of a turbulent boundary layer, Part 2, Statistical properties J. Fluid Mech. 228 53-86
11. Bearman P W 1971 Corrections for the effect of ambient temperature drift on hot-wire measurements in incompressible flow DISA Info. 11 25-9
12. Bellhouse B J and Rasmussen C G 1968 Low-frequency characteristics of hot-film anemometers DISA Info. 3-10
13. Bellhouse B J and Schultz D L 1967 The determination of fluctuation velocity in air with heated thin film gauges J. Fluid. Mech. 29 289-95
14. Bertrand J and Couders J P 1978 Hot-film probe calibration in liquids DISA Info. 23 28-32
15. Beuther P D, Shabbir A and George W K 1987 X-wire response in turbulent flows of high intensity turbulence and low mean velocities ASME Symp. on Thermal Anemometry (FED 53) pp 39-42
16. Bhatia J C, Durst F and Jovanovic J 1982 Corrections of hot-wire anemometer measurements near walls J. Fluid Mech. 122 411-31
17. Blackwelder RF 1981 Hot-wire and hot-film anemometers Methods of Experimental Physics: Fluid Dynamics, Part A vol 18, ed R J Emrich pp 259-314 (New York: Academic)
18. Blackwelder R F and McLean I 1987 A hot-wire probe for velocity measurement in reverse flows ASME Symp. on Thermal Anemometry (FED 53) pp 73-8
19. Bradbury L J S and Castro L P 1971 A pulsed-wire technique for measurements in highly turbulent flows J. Fluid Mech. 49 657-91
20. Bradshaw P 1971 An Introduction to Turbulence and its Measurements (Oxford: Pergamon)
21. Bremhorst K 1993 Some past contributions to cold/hot-wire anemometry measurements in heated flows: where to from here? ASME Symp. on Thermal Anemometry (FED 167) pp 35-40
22. Bremhorst K and Listijono J 1987 Static pressure effects on calibration of velocity transducers at nozzle exits Exp. Fluids 5 344-8
23. Browne L W B, Antonia R A and Chua L P 1989a Calibration of X-probes for turbulent flow measurements Exp. Fluids 7 201-8
24. Browne L W B, Antonia R A and Chua L P 1989b Velocity vector cone angle in turbulent flows Exp. Fluids 8 13-6
25. Bruun H H 1976 A note on static and dynamic calibration of constant-temperature hot-wire probes J. Fluid Mech. 76 145-55
26. Bruun H H 1979 Interpretation of hot-wire probe signals in subsonic airflows J. Phys. E: Sci. Instrum. 12 1116-28
27. Bruun HH 1995 Hot-wire Anemometry (Oxford: Oxford University Press)
28. Bruun H H, Farrar B and Watson I 1989 A swinging arm calibration method for low velocity hot-wire probe calibration Exp. Fluids 7 400-4
29. Bruun H H, Fitouri A and Khan M K 1993 The use of a multiposition single yawed hot-wire probe for measurements in swirling flow ASME Third Int. Symp. on Thermal Anemometry (FED, Washington DC) (FED 167) pp 57-65
30. Bruun H H, Khan M A, Al-Kayiem H H and Fardad A A 1988 Velocity calibration relationships for hot-wire anemometry J. Phys. E: Sci. Instrum. 21 225-32
31. Bruun H H, Khan M A, Al-Kayiem H H and Fardad A A 1990b Velocity component measurements by X hot-wire anemometry Meas. Sci. Technol. 1 1314-21
32. Bruun H H, Nabhani N, Al-Kayiem H H, Fardad A A, Khan M A and Hogarth E 1990a Calibration and analysis of X hot-wire probe signals Meas. Sci. Technol. 1 782-5
33. Bruun H H and Tropea C 1985 The calibration of inclined hot-wire probes J. Phys. E. Sci. Instrum. 18 405-13
34. Buresti G and Di Cocco N R 1987 Hot-wire measurement procedures and their appraisal through a simulation technique J. Phys. E: Sci. Instrum. 20 87-99
35. Castro I P 1986 The measurement of Reynolds stresses Encyclopedia of Fluid Mechanics vol 1, ed N P Cheremisinoff pp 1257-79
36. Castro I P and Chen B S 1982 The measurement of Reynolds stresses with a pulsed-wire anemometer J. Fluid Mech. 118 41-58
37. Castro I P and Dianat M 1990 Pulsed wire velocity anemometry near walls Exp. Fluids 8 343-52
38. Castro I P and Haque A 1987 The structure of a turbulent shear layer bounding a separation region J. Fluid Mech. 179 439-468
39. Castro I P and Haque A 1988 The structure shear layer bounding a separation region. Part 2: Effects of free-stream turbulence J. Fluid Mech. 192 577-95
40. Champagne F H and Sleicher C A 1967 Turbulence measurements with inclined hot-wires, Part 2. Hot-wire response equations J. Fluid Mech. 28 177-82
41. Champagne F H, Sleicher C A and Wehrmann O H 1967 Turbulence measurements with inclined hot-wires, Part 1. Heat transfer experiments with inclined hot-wire J. Fluid Mech. 28 153-75
42. Chang P H, Adrian R J and Jones B G 1983 Comparison between triple-wire and X-wire measurement techniques in high intensity shear flow Proc. 8th Biennial Symp. on Turbulence (University of Missouri, Rolla) ed J F Zakin and G K Patterson pp 206-20
43. Chew Y T and Shengxi S 1993 Wall proximity influence on hot-wire measurements Near-wall Turbulent Flows ed R M C So and B E Launder (Amsterdam: Elsevier) pp 609-19
44. Clausen P D and Wood D H 1989 The correction of X-probe results for transverse contamination J. Fluids Eng. 111 226-29
45. Collis D C and Williams M J 1959 Two-dimensional convection from heated wires at low Reynolds numbers J. Fluid Mech. 6 357-383
46. Comte-Bellot G 1976 Hot-wire anemometry Ann. Rev. Fluid Mech. 8 209-31
47. Comte-Bellot G, Strohl A and Alcaraz E 1971 On aerodynamic disturbances caused by single hot-wire probes J. Appl. Mech. 38 767-74
48. Corrsin S 1963 Turbulence: experimental methods Handbuch der Physik 8.2 (Berlin: Springer) pp 524-90
49. Cutler A D and Bradshaw P 1991 A crossed hot-wire technique for complex turbulent flows Exp. Fluids 12 17-22
50. Davies P O A L and Fischer M J 1964 Heat transfer from electrically heated cylinders Proc. R. Soc. A 280 486-527
51. Derksen R W and Azad R S 1983 An examination of hot-wire length corrections Phys. Fluids 26 1751-4
52. Devenport W J, Evans G P and Sutton E P 1990 A traversing pulsed-wire probe for velocity measurements near a wall Exp. Fluids 8 336-42
53. Devenport W J and Sutton EP 1991 Near-wall behaviour of separated and reattaching flows AIAA J. 29 25-31
54. Devenport W J and Sutton E P 1993 An experimental study of two flows through an axisymmetric sudden expansion Exp. Fluids 17 423-32
55. Döbbeling K, Lenze B and Leuckel W 1990a Basic considerations concerning the construction and usage of multiple hot-wire probes for highly turbulent three-dimensional flows Meas. Sci. Technol. 1 924-33
56. Döbbeling K, Lenze B and Leuckel W 1990b Computer-aided calibration and measurements with a quadruple hotwire probe Exp. Fluids 8 257-62
57. Drubka R E, Tan-atichat J and Nagib H M 1977 Analysis of temperature compensating circuits for hot-wires and hot-films DISA Info. 22 5-14
58. Dryden H L, Schubauer G B, Mock W C and Skramstad H K 1937 Measurements of intensity and scale of wind tunnel turbulence and their relationship to critical Reynolds number of spheres NACA Technical Report No. 581
59. Durst F, Kikura H, Lekakis I, Jovanović J and Ye Q 1996 Wall shear stress determination from near-wall mean velocity data in turbulent pipe and channel flows Exp. Fluids 20 417-28
60. Eckert E R C and Söhngen E 1952 Distribution of heat transfer coefficients around circular cylinders in crossflow at Reynolds numbers from 20 to 500 Trans. ASME 74 343-7
61. Eisner J W, Domagala P and Elsner W 1993 Effect of finite spatial resolution of hot-wire anemometry on measurements of turbulence energy dissipation Meas. Sci. Technol. 4 517-23
62. Fiedler H 1978 Data acquisition and signal processing in heated turbulent flows Proc. Dynamic Flow Conf. (Marseille) pp 81-100
63. Fingerson L M 1994 Thermal anemometry, current state, and future directions Rev. Sci. Instrum. 65 285-300
64. Fingerson L M and Freymuth P 1983 Thermal anemometers Fluid Mechanics Measurements ed R J Goldstein (Washington, DC: Hemisphere) pp 99-154
65. Foss J F, Klewicki C L and Disimile P J 1985 Transverse vorticity measurements using an array of four hot-wire probes Michigan State University, College of Engineering Report FSL-R-006
66. Foss J F and Wallace J M 1989 The measurement of vorticity in transitional and fully developed turbulent flows Advances in Fluid Mechanics Measurements (Lecture Notes in Engineering 45) ed M Gad-el-Hak (Berlin: Springer) pp 263-321
67. Frenkiel F N 1954 Effects of hot-wire length in turbulence investigation with a hot-wire anemometer Aero. Quart. 5 1-24
68. Freymuth P 1967 Feedback control theory for constant-temperature hot-wire anemometers Rev. Sci. Instrum. 38 677-81
69. Freymuth P 1977 Frequency response and electronic testing for constant-temperature hot-wire anemometers J. Phys. E: Sci. Instrum. 10 705-10
70. Freymuth P 1978 Theory of frequency optimisation for hot-film anemometers J. Phys. E: Sci. Instrum. 11 177-9
71. Freymuth P 1979 Engineering estimates of heat conduction loss in constant temperature thermal sensors TSI Quarterly V 3-8
72. Freymuth P and Fingerson LM 1977 Electronic testing of frequency response for thermal anemometers TSI Quarterly III 5-12
73. Friehe C A and Schwarz W H 1968 Deviations from the cosine law for yawed cylindrical anemometer sensors J. Appl. Mech. 35 655-62
74. Frota M N and Moffat R R 1983 Effect of combined roll and pitch angles on triple hot-wire measurements of mean and turbulence structure DISA Info. 28 15-23
75. Fujita H and Kovasznay L S G 1968 Measurement of Reynolds stress by a single rotated hot wire anemometer Rev. Sci. Instrum. 39 1351-5
76. George W K, Beuther P D and Shabbir A 1989 Polynomial calibrations for hot wires in thermally varying flows Exp. Thermal Fluid Sci. 2 230-5
77. Gessner F B and Moller GL 1971 Response behaviour of hot wires in shear flow J. Fluid Mech. 47 449-68
78. Gieseke T J and Guezennec Y G 1993 An experimental approach to the calibration and use of triple hot-wire probes Exp. Fluids 14 305-15
79. Guellouz M S and Tavoularis S 1995 A simple pendulum technique for the calibration of hot-wire anemometers over low-velocity ranges Exp. Fluids 18 199-203
80. Handford P M and Bradshaw P 1989 The pulsed-wire anemometer Exp. Fluids 7 125-32
81. Haw R C and Foss J F 1990 A facility for low speed calibration ASME Proc. Symp. Heuristics of Thermal Anemometry (University of Toronto) (FED 97) pp 29-33
82. Hebbar K S 1980 Wall proximity corrections for hot-wire readings in turbulent flows DISA Info. 25 15-6
83. Heikal M, Antoniou A and Cowell T A 1988 A rig for the static calibration of constant-temperature hot wires at very low velocities Exp. Thermal Fluid Sci. 1 221-3
84. Hinze J O 1959 Turbulence (New York: McGraw-Hill)
85. Hinze J O 1975 Turbulence 2nd edn (New York: McGraw-Hill)
86. Hirota M, Fujita H and Yokosawa H 1988 Influences of velocity gradient on hot-wire anemometry with an X-wire probe J. Phys. E: Sci. Instrum. 21 1077-84
87. Hoffmeister M 1972 Using a single hot-wire probe in three-dimensional turbulent flow fields. DISA Info. 13 26-9
88. Holzäpfel F, Lenze B and Leuckel W 1994 Assessment of a quintuple hotwire measurement technique for highly turbulent flows Exp. Fluids 18 100-6
89. Hussein H J and George W K 1990 Influence of wire spacing on derivative measurement with parallel hot-wire probes ASME Forum on Turbulent Flow (FED 94) pp 121-4
90. Janke G 1987 Hot wire in wall proximity Advances in Turbulence ed G Comte-Bellot and J Mathieu (Berlin: Springer) pp 488-98
91. Jaroch M 1985 Development and testing of pulsed-wire probes for measuring fluctuating quantities in highly turbulent flows Exp. Fluids 3 315-22
92. Jaroch M and Dahm A 1988 A new pulsed-wire probe for measuring the Reynolds stresses plane containing the main shear direction of a turbulent shear flow J. Phys. E: Sci. Instrum. 21 1085-94
93. Jerome F E, Guitton D E and Patel R P 1971 Experimental study of the thermal wake interference between closely spaced wires of an X-type hot-wire probe Aero. Quart. 22 119-26
94. Johansson A V and Alfredsson P H 1983 Effects of imperfect spatial resolution on measurements of wall-bounded turbulent shear flows J. Fluid Mech. 137 409-21
95. Johnson F D and Eckelmann H 1984 A variable angle method of calibration for X-probes applied to wall-bounded turbulent shear flow Exp. Fluids 2 121-30
96. Jorgensen F E 1971 Directional sensitivity of wire and fiber-film probes DISA Info. 11 31-7
97. Kanevce G and Oka S 1973 Correcting hot-wire readings for influence of fluid temperature variations DISA Info. 15 21-4
98. Kawall J G, Shokr M and Keffer J F 1983 A digital technique for the simultaneous measurement of streamwise and lateral velocities in turbulent flows J. Fluid Mech. 133 83-112
99. Kelso R M, Lim T T and Perry A E 1994 A novel flying hot-wire system Exp. Fluids 16 181-6
100. Khan M K, MacKenzie K A and Bruun H H 1987 The effects of blockage correction in hot-wire probe calibration facilities J. Phys. E: Sci. Instrum. 20 1031-5
101. King L V 1914 On the convection of heat from small cylinders in a stream of fluid: Determination of the convection constants of small platinum wires with applications to hot-wire anemometry Phil. Trans. R. Soc. A. 214 373-432
102. Ko N W M and Davies P O A L 1971 Interference effect of hot wires IEEE Trans. Instrum. Meas. 20 76-8
103. Koppius A M and Trines GRM 1976 The dependence of hot-wire calibration on gas temperature at low Reynolds numbers Int. J. Heat Mass Transfer 19 967-74
104. Kramers H 1946 Heat transfer from spheres to flowing media Physica 12 61-80
105. Krishnamorthy L V, Wood D H, Antonia R A and Chambers A J 1985 Effect of wire diameter and overheat ratio near a conducting wall Exp. Fluids 3 121-7
106. Kühn W and Dreßler B 1985 Experimental investigation on the dynamic behaviour of hot-wire probes J. Phys. E: Sci. Instrum. 18 614-22
107. Lakshminarayana B 1982 Three sensor hot wire/film technique for three dimensional mean and turbulence flow field measurement TSI Quarterly VIII 3-13
108. Le Huu Nho E and Béguier C 1994 Measurements of the turbulent 3D field by means of a rotating x-wire probe Int. Symp. on Turbulence, Heat and Mass Transfer (Lisbon, Portugal)
109. Lee T and Budwig R 1991 Two improved methods for low-speed hot-wire calibration Meas. Sci. Technol. 2 643-6
110. Lee S P, Kim J I and Kauh S 1995 Temperature compensation of hot-wire anemometer with photoconductive cell Exp. Fluids 19 362-5
111. Lekakis I C 1988 Coherent structures in fully developed turbulent pipe flow PhD Thesis University of Illinois, Urbana
112. Lekakis I C, Adrian R J and Jones B G 1989 Measurement of velocity vectors with orthogonal and non-orthogonal triple-sensor probes Exp. Fluids 7 228-40
113. Lemonis G and Dracos T 1995 A new calibration and data reduction method for turbulence measurement by multihotwire probes Exp. Fluids 18 319-28
114. Lienhard J H and Heiland K N 1989 An experimental analysis of fluctuating temperature measurements using hot-wires at different overheats Exp. Fluids 7 265-70
115. Ligrani P M and Bradshaw P 1987a Subminiature hot-wire sensors: development and use J. Phys. E: Sci. Instrum. 20 323-32
116. Ligrani P M and Bradshaw P 1987b Spatial resolution and measurement of turbulence in the viscous sublayer using subminiature hot-wire probes Exp. Fluids 5 407-17
117. Lomas C G 1986 Fundamentals of Hot-wire Anemometry (Cambridge: Cambridge University Press)
118. Lueptow R M, Breuer K S and Haritonidis J H 1988 Computer-aided calibration of X-wire probes using a look-up table Exp. Fluids 6 115-8
119. Maciejewski P K and Moffat R J 1994 Interpreting orthogonal triple-wire data from very high turbulence flows J. Fluids Eng. 116 463-8
120. Marasli B, Nguyen P and Wallace J M 1993 A calibration technique for multiple-sensor probes and its application to vorticity measurements in the wake of a circular cylinder Exp. Fluids 35 209-18
121. Merati P and Adrian R J 1984 Directional sensitivity of single and multiple sensor probes TSI Quarterly X 3-12
122. Meyer L 1992 Calibration of a three-wire probe for measurements in nonisothermal flow Exp. Thermal Fluid Sci. 5 260-7
123. Mobarak A, Sedrak M F and El Telbany M M M 1986 On the direction sensitivity of hot-wire probes Dantec Info. 2 7-9
124. Mojola O O 1974 A hot-wire method for three-dimensional shear flows DISA Info. 16 11-14
125. Morrison G L, Perry A E and Samuel A E 1972 Dynamic calibration of inclined and crossed hot wires J. Fluid Mech. 52 465-74
126. Müller U R 1982 On the accuracy of turbulence measurements with inclined hot-wires J. Fluid Mech. 119 155-72
127. Müller U R and Schön T 1987 Developments towards a three-component hot-wire technique for high-intensity and separated turbulent flows 6th Symp. on Turbulent Shear Flows (Toulouse)
128. Nitsche W und Haberland C 1984 Ein vereinfachtes Eichverfahren für Hitzdrahtanemometer Z. Flugwiss. Weltraumforsch. 8 264-70
129. Oka S and Kostic Z 1972 Influence of wall proximity on hot-wire velocity measurements DISA Info. 13 29-33
130. Ong L and Wallace J 1996 The velocity field of the turbulent very near wake of a circular cylinder Exp. Fluids 20 441-53
131. Panchapakesan N R and Lumley J L 1993 Turbulence measurements in axisymmetric jets of air and helium, Part 1, air jet J. Fluid Mech. 246 197-223
132. Pao Y H 1965 Structure of turbulent velocity and scalar fields at large wavenumbers Phys. Fluids 8 1063-75
133. Paranthoen P, Lecordier J C and Petit C 1983 Dynamic sensitivity of the constant-temperature hot-wire anemometer to temperature fluctuations TSI Quart. IX 3-8
134. Paranthoen P, Petit C and Lecordier J C 1982 The effect of the thermal prong-wire interaction on the response of a cold wire in gaseous flows (air, argon and helium) J. Fluid Mech. 124 457-73
135. Perry A E 1982 Hot-wire Anemometry (Oxford: Clarendon)
136. Perry A E and Morrison G L 1971 Static and dynamic calibrations of constant-temperature hot-wire systems J. Fluid Mech. 47 765-77
137. Pessoni D H and Chao B T 1974 A simple technique for turbulence measurements in nonisothermal air flows Proc. 5th Int. Heat Transfer Conf. (ISME) 5 278-82
138. Pichon J 1970 Comparison of some methods of calibratng hot-film probes in water DISA Info. 10 15-21
139. Pitts W M and McCaffrey B J 1986 Response behaviour of hot wires and films to flows of different gases J. Fluid Mech. 169 465-512
140. Pompeo L and Thomann H 1993 Quadruple hot-wire probes in a simulated wall flow Exp. Fluids 14 145-52
141. Roberts J B 1973 On the correction of hot-wire turbulence measurements for spatial resolution errors Aeronautic. J. 77 406-22
142. Rodi W 1975 A new method of analysing hot-wire signals in highly turbulent flow, and its evaluation in a round jet DISA Info. 17 9-18
143. Rosemann H 1989 Einfluss der Geometrie von Mehrfach-Hitzdrahtsonden auf die Messergebnisse in turbulenten Strömungen Forschungsbericht DLR-FB 89-26 Göttingen
144. Russ S and Simon T W 1991 On the rotating, slanted, hot-wire technique Exp. Fluids 12 76-80
145. Russ S and Simon T W 1990 Signal processing using the orthogonal triple-wire equations TSI Flow Lines 3-9
146. Samet M and Einav S 1987 A hot-wire technique for simultaneous measurement of instantaneous velocities in 3-D flows J. Phys. E: Sci. Instrum. 20 683-90
147. Schewe J and Ronneberger D 1990 Error-tolerant calibration of dual sensor probes used in a turbulent wall boundary layer Exp. Fluids 9 285-9
148. θ = 1410 J. Fluid Mech. 187 61-98
149. Stricken H 1974 Hitzdraht- und Hitzfilmanemometrie (Berlin: VEB)
150. Strohl A and Comte-Bellot G 1973 Aerodynamic effects due to configuration of X-wire anemometers J. Appl. Mech. 40 661-6
151. Suzuki Y and Kasagi N 1992 Evaluation of hot-wire measurements in wall shear turbulence using a direct numerical simulation database Exp. Thermal Fluid Sci. 5 69-77
152. Swaminathan M K, Rankin G W and Sridhar K 1986 A note on the response equations for hot-wire anemometry J. Fluids Eng. 108 115-8
153. Tagawa M, Tsuji T and Nagano Y 1992 Evaluation of X-wire response to wire separation for wall turbulence measurements Exp. Fluids 12 413-21
154. Takagi S 1986 A hot-wire anemometer compensated for ambient temperature variations J. Phys. E: Sci. Instrum. 19 739-43
155. Tewari S S and Jaluria Y 1990 Calibration of constant-temperature hot-wire anemometers for very low velocities in air Rev. Sci. Instrum. 61 3834-45
156. Toy N and Thomas S H 1987 The twin pulsed wire anemometer - a new instrument for measurements in complex flows ASME Symp. on Thermal Anemometry (FED 53) pp 65-72
157. Tsinober A, Kit E, and Dracos T 1992 Experimental investigation of the field of velocity gradients in turbulent flows J. Fluid Mech. 242 169-92
158. Tsuji T and Nagano Y 1989 An anemometry technique for turbulence measurements at low velocities Exp. Fluids 7 547-59
159. Tsuji T, Nagano Y and Tagawa M 1992 Frequency response and instantaneous temperature profile of cold-wire sensors for fluid temperature fluctuation measurements Exp. Fluids 13 171-8
160. Turan Ö and Azad R S 1989 Effect of hot-wire probe defects on a new method of evaluating turbulence dissipation J. Phys. E: Sci. Instrum. 24 254-61
161. Turan Ö, Azad R S and Atamanchuk T M 1987 Wall effect on the hot-wire signal without flow J. Phys. E: Sci. Instrum. 20 1278-80
162. Tutu N and Chevray R 1975 Cross-wire anemometry in high intensity turbulence J. Fluid Mech. 71 785-800
163. Uberoi M S and Kovasznay L S G 1953 On mapping and measurement of random fields Quart. Appl. Math. 10 375-93
164. Vukoslavčević P, Wallace J M and Balint J-L 1991 The velocity and vorticity vector fields of a turbulent boundary layer. Part 1. Simultaneous measurement by hot-wire anemometry J. Fluid Mech. 228 25-51
165. Wagner P M and Kent J C 1988 On the directional sensitivity of hot-wires: a new look at an old phenomenon Exp. Fluids 6 553-60
166. Wallace J M and Foss J F 1995 The measurement of vorticity in turbulent flows Ann. Rev. Fluid Mech. 27 469-514
167. Willmarth W W 1985 Geometric interpretation of the possible velocity vectors obtained with multiple-sensor probes Phys. Fluids 28 462-5
168. Willmarth W W and Bogar T J 1977 Survey and new measurements of turbulent structure near the wall Phys. Fluids 20 S9-S21
169. Wroblewski D E and Eibeck PA 1991 A frequency response compensation technique for cold wires and its application to a heat flux probe Exp. Thermal Fluid Sci. 4 452-63
170. Wu S and Bose N 1993 Calibration of a wedge-shaped vee hot-film probe in a towing tank Meas. Sci. Technol. 4 101-8
171. Wyngaard J C 1968 Measurement of small-scale turbulence structure with hot wires J. Phys. E: Sci. Instrum, 1 1105-8
172. Wyngaard J C 1969 Spatial resolution of the vorticity meter and other hot-wire arrays J. Phys. E: Sci. Instrum. 2 983-7
173. Yavuzkurt S, Crawford M E and Moffat R J 1977 Real-time hot-wire measurement in three-dimensional flow Proc. 5th Biennial Symp. on Turbulence (University of Missouri, Rolla)
174. Yoshino F, Hayashi T and Waka R 1994 On the series expansion of hot-wire response equation Meas. Sci. Technol. 5 275-87
175. Zabat M, Browand F K and Plocher D 1992 In-situ swinging arm calibration for hot-film anemometers Exp. Fluids 12 223-8
176. Zhu Y and Antonia R A 1995a Effect of wire separation on X-probe measurements in a turbulent flow J. Fluid Mech. 287 199-223
177. Zhu Y and Antonia R A 1995b The spatial resolution of two X-probes for velocity derivative measurements Meas. Sci. Technol. 6 538-49