Annular Wall Layer Thickness in Circulating Fluidized Bed Risers

Canadian Journal of Chemical Engineering

Volumn 74, Issue 5, 1996, Pages 811-814

  Bi, H T ^a   Zhou, J ^a   Qin, S Z ^a   Grace, J R ^a  

^a UNIVERSITY OF BRITISH COLUMBIA   (Canada)

Author keywords

Circulating fluidized beds; Gas solid suspensions; Wall layer thickness

Indexed keywords

INTEGRATION; NUMERICAL METHODS; PARTICLES (PARTICULATE MATTER); SUSPENSIONS (FLUIDS); THICKNESS MEASUREMENT; VELOCITY MEASUREMENT; WALL FLOW;

ANNULAR WALL LAYER THICKNESS; CIRCULATING FLUIDIZED BED RISERS; GAS SOLID SUSPENSIONS; SOLIDS FLUX MEASUREMENTS;

FLUIDIZED BEDS;

FLUIDIZED BEDS; RISERS; WALLS;

EID: 0030265464     PISSN: 00084034     EISSN: None     Source Type: Journal    
DOI: 10.1002/cjce.5450740534     Document Type: Article

References (22)

1. Bader, R., J. Findlay and T. M. Knowlton, "Gas/Solid Flow Patterns in a 30.5-cm Diameter Circulating Fluidized Bed," in "Circulating Fluidized Bed Technology II," P. Basu and J. F. Large, eds., Pergamon Press, Oxford (1988), pp. 123-131.
2. Berruti, F. and N. Kalogerakis, "Modelling the Internal Flow Structure of Circulating Fluidized Beds," Can. J. Chem. Eng. 67, 1010-1014 (1989).
3. Beaud, F. and M. Louge, "Similarity of Radial Profiles of Solids Volume Fraction in a Circulating Fluidized Bed," in "Preprints for Fluidization VIII," C. Laguerie and J. F. Large, eds., Engineering Foundation, New York (1995), pp. 97-104.
4. Bodelin, P., Y. Molodtsof and A. Delebarre, "Flow Structure Investigations in a CFB," in "Circulating Fluidized Bed Technology IV," A. A. Avidan, ed., AIChE, New York (1994), pp. 1181-122.
5. Couturier, M., B. Doucette, D. Stevens, S. Poolpol and V. Rabin, "Temperature, Gas Concentration and Solids Mass Flux Profiles within a Large Circulating Fluidized Bed Combustor," in "Proceedings 11th Int. Conf. Fluidized Bed Combustion," E. J. Anthony, ed., ASME, New York (1991), pp. 107-114.
6. Gajdos, L. J. and T. W. Bierl, "Studies in Support of Recirculating Bed Reactors for the Processing of Coal," Annual Report to U.S. Dept. of Energy, FE-2449-8, Carnegie-Mellon University, Pittsburgh, PA, Sept. (1978).
7. Harris, B. J. and J. F. Davidson, "A Core/Annulus Deposition Model for Circulating Fluidized Beds," in "Circulating Fluidized Bed Technology IV," A. A. Avidan, ed., AIChE, New York, (1994), pp. 32-39.
8. Herb, B., S. Dou, K. Tuzla and J. C. Chen, "Solids Mass Fluxes in Circulating Fluidized Beds," Powder Technol. 70, 197-205, 1992.
9. Leckner, B., M. R. Golriz, W. Wang, B. A. Andersson and F. Johnsson, "Boundary Layers - First Measurements in the 12 MW CFB Research Plant at Chalmers University," in "Proceedings 11th Int. Conf. Fluidized Bed Combustion," E. J. Anthony, ed., ASME, New York (1991), pp. 771-776.
10. Miller, A. and D. Gidaspow, "Dense, Vertical Gas-Solid Flow in a Pipe," AIChE J. 38, 1801-1815 (1992).
11. Patience, G. S. and J. Chaouki, "Gas Phase Hydrodynamics in the Riser of a Circulating Fluidized Bed," Chem. Eng. Sci. 48, 3195-3205 (1993).
12. Qian, G. and J. Li, "Particle-Velocity Measurement in CFB with an Integrated Probe", in "Circulating Fluidized Bed Technology IV," A. A. Avidan, ed., AIChE, New York (1994), pp. 274-278.
13. Rhodes, M. J., "Modelling the Flow Structure of Upward-Flowing Gas-Solids Suspensions," Powder Technol. 60, 27-38 (1990).
14. Rhodes, M. J. and P. Laussmann, "Characterizing Non-uniformities in Gas-Particle Flow in the Riser of a Circulating Fluidized Bed," Powder Technol. 72, 277-284 (1992).
15. Senior, R. C. and C. Brereton, "Modelling of Circulating Fluidized Bed Solids Flow and Distribution," Chem. Eng. Sci. 47, 281-296 (1992).
16. Werderman, C., Dr.-Ing. dissertation, Technical University Hamburg-Harburg (1992). (Data from Werther, 1994).
17. Werther, J., "Fluid Mechanics of Large-Scale CFB Units," in "Circulating Fluidized Bed Technology IV," A. A. Avidan, ed., AIChE, New York (1994), pp. 1-14.
18. Zhang, W., F. Johnsson and B. Leckner, "Characteristics of the Lateral Particle Distribution in Circulating Fluidized Bed Boilers," in "Circulating Fluidized Bed Technology IV," A. A. Avidan, ed., AIChE, New York (1994), pp. 266-273.
19. Zhou, J., J. R. Grace, S. Qin, C. M. H. Brereton, C. J. Lim and J. Zhu, "Voidage Profiles in a Circulating Fluidized Bed of Square Cross-Section," Chem. Eng. Sci. 49, 3217-3226 (1994).
20. Zhou, J., J. R. Grace, C. J. Lim and C. M. H. Brereton, "Particle Velocity Profiles in a Circulating Fluidized Bed of Square Cross-Section," Chem. Eng. Sci. 50, 237-244 (1995).
21. Zhou, J., "Circulating Fluidized Bed Hydrodynamics in a Riser of Square Cross-Section," Ph.D. thesis, University of British Columbia, Vancouver, Canada (1995).
22. Zhu, C., M. C. Slaughter and S. L. Soo, "Covariance of Density and Velocity Fields of a Gas-Solid Suspension," Rev. Sci. Instrum. 62, 2835-2836 (1991).