Mechanical fatigue in monolithic non-transforming ceramics

Progress in Materials Science

Volumn 40, Issue 4, 1996, Pages 265-331

  Roebben, G ^a,b   Steen, M ^a   Bressers, J ^a   Van Der Biest, O ^b  

^a JOINT RESEARCH CENTRE   (Italy)

^b UNIVERSITY OF LEUVEN   (Belgium)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK PROPAGATION; CREEP; DEFORMATION; FATIGUE OF MATERIALS; FATIGUE TESTING; FRACTURE MECHANICS; HIGH TEMPERATURE OPERATIONS; LOADS (FORCES); LOW TEMPERATURE OPERATIONS; STRAIN; STRESSES; THERMAL EXPANSION;

CYCLIC LOADING; DYNAMIC FATIGUE; FATIGUE EFFECTS; FATIGUE RESISTANCE; INTERGRANULAR PHASES; MECHANICAL FATIGUE; STATIC FATIGUE; THERMAL CONTRACTION; THERMAL FATIGUE;

CERAMIC MATERIALS;

EID: 0030265138     PISSN: 00796425     EISSN: None     Source Type: Journal    
DOI: 10.1016/0079-6425(96)00003-5     Document Type: Review

References (248)

1. A. G. Evans, Int. J. Frac. 16, 485-498 (1980).
2. N. A. Fleck, K. J. Kang and M. F. Ashby, Acta Metall. Mater. 42, 365-381 (1994).
3. R. F. Pabst, Ber. Dt. Keram. Ges. 54, 392-395 (1977).
4. S. Suresh, Fatigue of Materials. Cambridge University Press, Cambridge (1991).
5. A. Weddigen and G. Grathwohl, Proc. DGM/DKG Symp. Mechanische Eigenschaften keramischer Konstruktionswerkstoffe (edited by G. Grathwohl), pp. 149-160. Deutsche Gesellschaft für Materialkunde, Oberursel, Germany (1993).
6. J. N. Adami, D. Bolsch, J. Bressers, E. Fenske and M. Steen, J. Eur. Ceram. Soc. 7, 227-236 (1991).
7. R. Danzer, Proc. 12th Int. Plansee Seminar '89, High Temperature and Wear Resistant Materials in a World of Changing Technology (edited by H. Bildstein and H. M. Ortner), Vol. 2, pp. 183-198. Metallwerk Plansee, Reutte, Austria (1989).
8. R. W. Davidge, Mechanical Behaviour of Ceramics. Cambridge University Press, Cambridge (1979).
9. H. Riedel, Fracture at High Temperatures, p. 263. Springer-Verlag, Berlin, Germany (1987).
10. A. G. Evans and T. G. Langdon, Prog. Mater. Sci. 21, 171-441 (1976).
11. B. R. Lawn, J. Am. Ceram. Soc. 66, 83-91 (1983).
12. W. B. Hillig and R. J. Charles, High Strength Materials (edited by V. F. Zackay), pp. 682-701, John Wiley, New York (1965).
13. T. Ohji, Y. Yamauchi, W. Kanematsu and S. Ito, J. Ceram. Soc. Japan Int. Ed. 98, 4-10 (1990).
14. R. J. Charles, J. Appl. Phys. 29, 1554-1560 (1958).
15. S. M. Barinov and M. Sakai, J. Mater. Res. 9, 1412-1425 (1994).
16. R. O. Ritchie, Mater. Sci. Engng A103, 15-28 (1988).
17. T. Fett and D. Munz, Fat. Fract. Engng Mater. Struct. 17, 1157-1174 (1994).
18. F. Rat and C. Boberski, Prakt. Metallogr. 32, 297-311 (1995).
19. A. G. Evans, J. Am. Ceram. Soc. 73, 187-206 (1990).
20. R. Knehans and R. Steinbrech, J. Mater. Sci. Lett. 1, 327-329 (1982).
21. J. Rödel, J. Eur. Ceram. Soc. 9, 323-334 (1992).
22. T. Fett and D. Munz, J. Eur. Ceram. Soc. 15, 377-383 (1995).
23. S. B. Biner, Acta Metall. Mater. 42, 3643-3652 (1994).
24. F. E. Buresch, J. Mat. Sci. 29, 6341-6353 (1994).
25. A. G. Evans, Mater. Sci. Res. 21, 775-794 (1986).
26. K. T. Faber and A. G. Evans, Acta Metall. 31, 565-576 (1983).
27. K. T. Faber and A. G. Evans, Acta Metall. 31, 577-584 (1983).
28. Y. Tajima, Mat. Res. Soc. Symp. Proc. 287, 189-196 (1993).
29. S. R. Choi and J. A. Salem, J. Am. Ceram. Soc. 77, 1042-1046 (1994).
30. K. Xia and T. G. Langdon, J. Mater. Sci. 29, 5219-5231 (1994).
31. H. L. Lee, S. E. Park and B. S. Hahn, J. Mater. Sci. 30, 2521-2525 (1995).
32. H. N. Ko, J. Mater. Sci. Lett. 5, 464-466 (1986).
33. D. Bolsch, Dissertation, University of Karlsruhe, Germany (1990).
34. I-W. Chen, S.-Y. Liu, D. S. Jacobs and M. Engineer, Proc. Fracture Mechanics of Ceramics Conf., Karlsruhe, Germany (in press).
35. T. Fett, G. Martin, D. Munz and G. Thun, J. Mater. Sci. 26, 3320-3328 (1991).
36. M. Bartsch, Werkstofftechnik Kolloquium Duisburg '95, pp. 6.1-6.25. Gerard Mercator University, Duisburg, Germany (1995).
37. D. A. Krohn and D. P. Hasselman, J. Am. Ceram. Soc. 55, 208-211 (1972).
38. S. Lauf, A. Bornhauser and R. F. Pabst, Proc. 4th ECF, Fracture and the Role of Microstructure, Vol. 2, pp. 641-649. Engineering Materials Advisory Services Ltd, Cradley Heath, U.K. (1982).
39. T. Yokobori, T. Adachi, Ta. Yokobori, H. Abe, H. Takahashi, J. Nakayama and H. Fujita, J. Ceram. Soc. Japan Int. Ed. 98, 961-967 (1990).
40. T. Fett, D. Munz and G. Thun, J. Mater. Sci. Lett. 12, 220-222 (1993).
41. A. G. Evans and E. R. Fuller, Metall. Trans. 5A, 27-33 (1974).
42. Y.-W. Mai, X. Hu, K. Duan and B. Cotterell, Fracture Mechanics of Ceramics (edited by R. C. Bradt et al.), Vol. 9, pp. 387-422. Plenum Press, New York (1992).
43. F. Guiu, J. Mater. Sci. Lett. 13, 1357-1361 (1978).
44. M. Hojo, K. Tanaka, C. G. Gustafson and R. Hayashi, Comp. Sci. Technol. 29, 273-292 (1987).
45. H. Kishimoto, A. Ueno and H. Kawamoto, J. Soc. Mater. Sci. Japan 36, 1122-1127 (1987).
46. H. Kishimoto, A. Ueno and H. Kawamoto, Fatigue '90, Proc. 4th Int. Conf. on Fatigue and Fatigue Thresholds (edited by H. Kitagawa and T. Tanaka), Vol. 2, pp. 727-732. Tokyo, Japan (1990).
47. A. Ueno, H. Kishimoto, H. Kawamoto and M. Asakura, Fatigue '90, Proc. 4th_Int. Conf. on Fatigue and Fatigue Thresholds (edited by H. Kitagawa and T. Tanaka), Vol. 2, pp. 733-738. Tokyo, Japan (1990).
48. H. Kishimoto, A. Ueno and H. Kawamoto, Fatigue of Advanced Materials, Proc. of the Engineering Foundation Int. Conf. (edited by R. O. Ritchie, R. H. Dauskardt and B. N. Cox), pp. 255-263. Santa Barbara, CA (1991).
49. S.-Y. Liu and I-W. Chen, J. Am. Ceram. Soc. 74, 1206-1216 (1991).
50. D. S. Jacobs and I-W. Chen, J. Am. Ceram. Soc. 78, 513-520 (1995).
51. C. J. Gilbert, R. H. Dauskardt and R. O. Ritchie, J. Am. Ceram. Soc. 78, 2291-2300 (1995).
52. C. J. Gilbert, R. N. Petrany, R. O. Ritchie, R. H. Dauskardt and R. W. Steinbrech, J. Mater. Sci. 30, 643-654 (1995).
53. L. Ewart and S. Suresh, J. Mater. Sci. Lett. 5, 774-778 (1986).
54. G. Roebben, M. Steen, J. Bressers and O. Van der Biest, Fort. Ber. DKG, Bd 9, Heft 4, 49-63. (1994).
55. G. Grathwohl and T. Liu, J. Am. Ceram. Soc. 74, 318-325 (1991).
56. S.-Y. Liu and I-W. Chen, J. Am. Ceram. Soc. 75, 1191-1204 (1992).
57. D. L. Davidson, J. B. Campbell and J. Lankford, Acta Metall. Mater. 39, 1319-1330 (1991).
58. M. Hoffman, Y.-W. Mai, S. Wakayama, M. Kawahara and T. Kishi, J. Am. Ceram. Soc. 78, 2801-2810 (1995).
59. B. N. Cox and D. B. Marshall, Acta Metall. Mater. 42, 341-363 (1994).
60. J. W. Holmes, J. Am. Ceram. Soc. 74, 1639-1645 (1991).
61. J. W. Holmes, Y. H. Park and J. W. Jones, J. Am. Ceram. Soc. 76, 1281-1293 (1993).
62. S. F. Shuler, J. W. Holmes, X. Wu and D. Roach, J. Am. Ceram. Soc. 76, 2327-2336 (1993).
63. A. G. Evans, F. W. Zok and R. M. McMeeking, Acta Metall. Mater. 39, 859-875 (1995).
64. B. K. Sarkar and T. G. J. Glinn, Proc. Brit. Ceram. Soc. 69, 199-203 (1970).
65. L. Ewart and S. Suresh, J. Mater. Sci. 22, 1173-1192 (1987).
66. M. V. Swain, G. H. Schneider and V. Zelizko, Fatigue of Advanced Materials, Proc. Engineering Foundation Int. Conf. (edited by R. O. Ritchie, R. H. Dauskardt and B. N. Cox), pp. 169-192. Santa Barbara, CA (1991).
67. M. Okazaki, A. J. McEvily and T. Tanaka, Metall. Trans. 22A, 1425-1434 (1991).
68. A. Weddigen and G. Grathwohl, Proc. 2nd European Ceramic Society Conf. (edited by G. Ziegler and H. Hausner), pp. 1079-1084. Freiburg, Germany (1991).
69. S. Horibe and R. Hirahara, Fatigue Fract. Engng Mater. Struct. 14, 863-870 (1991).
70. D. S. Jacobs and I.-W. Chen, J. Am. Ceram. Soc. 77, 1153-1161 (1994).
71. T. Okabe, G. Katayama, M. Kido and N. Udaka, Abstracts of 7th Int. Conf. on Mechanical Behaviour of Materials (edited by A. Bakker), pp. 181-182. The Hague, The Netherlands (1995).
72. T. Kawakubo and K. Komeya, J. Am. Ceram. Soc. 70, 400-405 (1987).
73. T. Kawakubo and A. Goto, Toshiba Review 158, 39-42 (1986).
74. S. Horibe and M. Sumita, J. Mater. Sci. 23, 3305-3313 (1988).
75. T. Kawakubo, N. Okabe and T. Mori, Fatigue '90, Proc. 4th Int. Conf. on Fatigue and Fatigue Thresholds (edited by H. Kitagawa and T. Tanaka), Vol. 2, pp. 717-726. Tokyo, Japan (1990).
76. Y. Mutoh, M. Takahashi, T. Oikawa and H. Okamoto, Fatigue of Advanced Materials, Proc. Engineering Foundation Int. Conf. (edited by R. O. Ritchie, R. H. Dauskardt and B. N. Cox), pp. 211-225. Santa Barbara, CA (1991).
77. S. Horibe and R. Hirahara, Acta Metall. Mater. 39, 1309-1317 (1991).
78. H. N. Ko, J. Mater. Sci. Lett. 14, 56-59 (1995).
79. D. Hong-Zhi, X. Xiu-San and Z. He-Sun, J. Mater. Sci. Lett. 13, 636-638 (1994).
80. D. Hong-Zhi, X. Xiu-San and Z. He-Sun, J. Mater. Sci. Lett. 14, 916-919 (1995).
81. N. P. Padture and B. R. Lawn, J. Am. Ceram. Soc. 78, 1431-1438 (1995).
82. A. G. Evans, Acta Metall. 26, 1845-1853 (1978).
83. N. Sridhar, W. Yang, D. J. Srolovitz and E. R. Fuller, J. Am. Ceram. Soc. 77, 1123-1138 (1994).
84. T. Fett and D. Munz, J. Mater. Sci. Lett. 11, 257-260 (1992).
85. G. Grathwohl, Mat.-wiss. u. Werkstofftech 19, 113-124 (1988).
86. Q. Ma and D. R. Clarke, J. Am. Ceram. Soc. 76, 1433-1440 (1993).
87. M. Masuda, I. Oda, M. Matsui and T. Soma, J. Ceram. Soc. Japan Int. Ed. 96, 275-280 (1988).
88. J. M. Sabadell and M. Anglada, J. Mater. Sci. Lett. 9, 964-966 (1990).
89. E. K. Tschegg and S. E. Tschegg-Stanzl, J. Mater. Sci. 29, 2867-2872 (1994).
90. M. Masuda, N. Yamada, T. Soma, M. Matsui and I. Oda, J. Ceram. Soc. Japan Int. Ed. 97, 509-514 (1989).
91. M. Masuda, T. Soma, M. Matsui and I. Oda, J. Ceram. Soc. Japan Int. Ed. 97, 601-607 (1989).
92. M. N. James, R. B. Tait and D. G. Mech, Fatigue Fract. Engng Mater. Struct. 14, 227-235 (1991).
93. S. Raghuraman, K. Y. Hour and J. F. Stubbins, Ceram. Engng Sci. Proc. 5, 939-947 (1992).
94. G. Choi and S. Horibe, J. Mater. Sci. Lett. 12, 1886-1887 (1993).
95. T. Ogawa and J. Llorca, J. Am. Ceram. Soc. 77, 961-969 (1994).
96. S.-Y. Liu and I.-W. Chen, J. Am. Ceram. Soc. 77, 2025-2035 (1994).
97. K. Ando, B. A. Kim, M. Isawa and N. Ogura, Fatigue Fract. Engng Mater. Struct. 15, 139-149 (1992).
98. Y. Bao and Z. Jin, Fatigue Fract. Engng Mater. Struct. 16, 829-835 (1993).
99. B. R. Lawn, N. P. Padture, F. Guiberteau and H, Cai, Acta Metall. Mater. 42, 1683-1693 (1994).
100. S. Suresh and J. R. Brockenbrough, Acta Metall. 36, 1455-1470 (1988).
101. S. Suresh and J. R. Brockenbrough, Fatigue '90, Proc. 4th Int. Conf. on Fatigue and Fatigue Thresholds (edited by H. Kitagawa and T. Tanaka), Vol. 2, pp. 739-744. Tokyo, Japan (1990).
102. S. Lathabai, Y.-W. Mai and B. R. Lawn, J. Am. Ceram. Soc. 72, 1760-1763 (1989).
103. F. Guiu, M. J. Reece and D. A. J. Vaughan, Fatigue of Advanced Materials, Proc. Engineering Foundation Int. Conf. (edited by R. O. Ritchie, R. H. Dauskardt and B. N. Cox) pp. 193-210. Santa Barbara, CA (1991).
104. L. Ewart and S. Suresh, J. Mater. Sci. 27, 5181-5191 (1992).
105. S. J. Bennison and B. R. Lawn, Acta Metall. 37, 2659-2671 (1989).
106. G. Vekinis, M. F. Ashby and P. W. R. Beaumont, Acta Metall. Mater. 38, 1151-1162 (1990).
107. J. W. Holmes and C. Cho, J. Am. Ceram. Soc. 75, 929-938 (1992).
108. F. Guiu, M. Li and M. J. Reece, J. Am. Ceram. Soc. 75, 2976-2984 (1992).
109. S. Lathabai, J. Rödel and B. R. Lawn, J. Am. Ceram. Soc. 74, 1340-1348 (1991).
110. H. Frei and G. Grathwohl, Ber. Dtsch. Keram. Ges. 68, 27-35 (1991).
111. R. H. Dauskardt, Acta Metall. Mater. 41, 2765-2781 (1993).
112. K. Urashima, Y. Tajima and M. Watanabe, Cyclic Fatigue in Ceramics (edited by H. Kishimoto, T. Hoshide and N. Okabe), Vol. 14, pp. 83-100. Elsevier Science, The Netherlands and the Society of Materials Science, Japan (1995).
113. M. Li and F. Guiu, Acta Metall. Mater. 43, 1871-1884 (1995).
114. M. M. Nagl, D. Casellas, L. Lianes and M. Anglada, Fourth Euro Ceramics (edited by S. Meriani and V. Sergo), pp. 131-138. Gruppo Editoriale Faenza Editrice, Italy (1995).
115. Y. Tajima, K. Urashima and M. Watanabe, Fracture Mechanics of Ceramics (edited by R. C. Bradt et al.), Vol. 9, pp. 235-249. Plenum Press, New York (1992).
116. T. Fett and D. Munz, Proc. Int. Conf. on Engineering Ceramics '92 (edited by M. Haviar), pp. 110-128. Reproprint, Bratislava, Slovakia (1993).
117. Y. Yamauchi, T. Ohji, W. Kanematsu, S. Ito and K. Kubo, Fracture Mechanics of Ceramics (edited by R. C. Bradt et al.), Vol. 9, pp. 465-480. Plenum Press, New York (1992).
118. T. Ogawa, Fracture Mechanics of Ceramics (edited by R. C. Bradt et al.), Vol. 9, pp. 455-464. Plenum Press, New York (1992).
119. A. Ueno, H. Kishimoto and H. Kawamoto, Fracture Mechanics of Ceramics (edited by R. C. Bradt et al.), Vol. 9, pp. 423-438. Plenum Press, New York (1992).
120. T. Fett and D. Munz, J. Mater. Sci. Lett. 12, 352-354 (1993).
121. M. Li and F. Guiu, Proc. 3rd European Ceramic Society Conf. (edited by P. Duran and J. F. Fernandez), pp. 847-852. Madrid, Spain (1993).
122. T. Hollstein and E. Gehrke, Proc. DGM/DKG Symp. Mechanische Eigenschaften keramischer Konstruktionswerkstoffe (edited by G. Grathwohl), pp. 173-183. Deutsche Gesellschaft für Materialkunde, Oberursel, Germany (1993).
123. Y. Mutoh, M. Takahashi and M. Takeuchi, Fatigue Fract. Engng Mater. Struct. 16, 875-890 (1993).
124. H. Kishimoto, A. Ueno, S. Okawara and H. Kawamoto, J. Am. Ceram. Soc. 77, 1324-1328 (1994).
125. B. E. Cornelissen, R. H. Dauskardt, R. O. Ritchie and G. Thomas, Acta Metall. Mater. 42, 3055-3064 (1994).
126. C. H. Huang, J. K. Shang and J. F. Stubbins, Ceram. Engng Sci. Proc., Sept.-Oct., pp. 642-650 (1994).
127. S. Raghuraman, Dissertation, University of Illinois at Urbana-Champaign, IL (1994).
128. Y. Yamauchi, M. Steen and J. Bressers, Proc. 4th Int. Conf. on Creep and Fracture in Engineering Materials and Structures (edited by B. Wilshire and D. R. J. Owen), pp. 449-463. The Institute of Metals, Swansea (1990).
129. X. Hu and Y.-W. Mai, J. Am. Ceram. Soc. 75, 848-853 (1992).
130. T. Ogawa, T. Ochi and K. Tokaji, Fatigue Fract. Engng Mater. Struct. 16, 837-849 (1993).
131. T. Tanaka, N. Okabe, H. Nakayama and Y. Ishimaru, Fatigue Fract. Engng Mater. Struct. 15, 643-653 (1992).
132. G. Choi, S. Horibe and Y. Kawabe, Acta Metall. Mater. 42, 3837-3842 (1994).
133. G. Choi, J. Mater. Sci. Lett. 14, 241-243 (1995).
134. G. Choi, Acta Metall. Mater. 43, 1489-1494 (1995).
135. S. Horibe, J. Eur. Ceram. Soc. 6, 89-95 (1990).
136. M. J. Reece, F. Guiu and M. F. R. Samara, J. Am. Ceram. Soc. 72, 348-352 (1989).
137. S. Horibe, Fatigue '90, Proc. 4th Int. Conf. on Fatigue and Fatigue Thresholds (edited by H. Kitagawa and T. Tanaka), Vol. 2, pp. 753-758. Tokyo, Japan (1990).
138. C. J. Lin, T. A. Mayer and D. F. Socie, Cyclic Deformation, Fracture and Non-destructive Evaluation of Advanced Materials, ASTM STP 1157 (edited by M. R. Mitchell and O. Buck), pp. 3-27. ASTM, Philadelphia, PA (1992).
139. M. Li and F. Guiu, Fourth Euro Ceramics (edited by S. Meriani, V. Sergo), pp. 279-286. Gruppo Editoriale Faenza Editrice, Italy (1995).
140. R. L. Carlson and C. J. Beevers, Engng Fract. Mech. 22, 651-660 (1985).
141. M. Okazaki, A. J. McEvily and T. Tanaka, Mater. Sci. Engng A143, 135-141 (1991).
142. S. Horibe, J. Mater. Sci. 9, 745-747 (1990).
143. G. A. Gogotsi and D. Yu. Ostrovoy, J. Eur. Ceram. Soc. 15, 271-281 (1995).
144. T. Ohji, Y. Yamauchi, W. Kanematsu and S. Ito, J. Mater. Sci. 25, 2990-2996 (1990).
145. Y. Mutoh, K. Yamaishi, N. Miyahara and T. Oikawa, Fracture Mechanics of Ceramics (edited by R. C. Bradt et al.), Vol. 10, pp. 427-440. Plenum Press, New York (1992).
146. S. Hampshire, R. Flynn, V. Morrissey, M. Pomeroy, T. Rouxel, J.-L. Besson and P. Goursat, Key Engng Mater. 89-91, 351-356 (1994).
147. G. Pezzotti, K. Ota, H.-J. Kleebe, Y. Okamoto and T. Nishida, Acta Metall. Mater. 43, 4357-4370 (1995).
148. G. Richter, G. Grathwohl, A. Geyer, R. Oberacker and F. Porz, Fourth Euro Ceramics (edited by S. Meriani and V. Sergo), Vol. 3, pp. 453-458. Gruppo Editoriale Faenza Editrice, Italy (1995).
149. S. Natansohn, A. E. Pasto and W. J. Rourke, J. Am. Ceram. Soc. 76, 2273-2284 (1993).
150. M. H. Lewis, A. R. Bhatti, R. J. Lumby and B. North, J. Mater. Sci. 15, 103-113 (1980).
151. D. S. Wilkinson, J. Am. Ceram. Soc. 71, 562-565 (1988).
152. M. M. Chadwick and D. S. Wilkinson, J. Am. Ceram. Soc. 76, 376-384 (1993).
153. D. R. Clarke, Surfaces and Interfaces of Ceramic Materials (edited by L.-C. Dufour, C. Monty and G. Petot-Ervas), pp. 57-79. Kluwer Academic, Dordrecht, The Netherlands (1989).
154. D. R. Clarke, J. Am. Ceram. Soc. 70, 15-22 (1987).
155. K. D. Chowdhury, R. W. Carpenter, W. Braue, J. Liu and H. Ma, J. Am. Ceram. Soc. 78, 2579-2592 (1995).
156. W. Braue and G. D. Quinn, Mater. Res. Soc. Symp. Proc. 287, 347-352 (1993).
157. J. Neogi, S. S. Neogi, J. Sankar and R. Vaidyanathan, Ceram. Engng Sci. Proc July-August, pp. 605-616 (1994).
158. M. M. Chadwick, D. S. Wilkinson and J. R. Dryden, J. Am. Ceram. Soc. 75, 2327-2334 (1992).
159. R. Raj and C. K. Chyung, Acta Metall. 29, 159-166 (1981).
160. R. L. Tsai and R. Raj, Acta Metall. 30, 1043-1058 (1982).
161. S. M. Wiederhorn, B. J. Hockey, D. C. Cranmer and R. Yeckley, J. Mater. Sci. 28, 445-453 (1993).
162. D. Croizet, Dissertation, Ecole Nationale Supérieure des Mines de Paris, France (1992).
163. W. E. Luecke, S. M. Wiederhorn, B. J. Hockey, R. F. Krause Jr and G. G. Long, J. Am. Ceram. Soc. 78, 2085-2096 (1995).
164. J.-L. Ding, K. C. Liu, K. L. More and C. R. Brinkman, J. Am. Ceram. Soc. 77, 867-874 (1994).
165. T. Hansson, U. Ramamurty, C. Bull and R. Warren, Mater. Sci. Engng (in press).
166. R. L. Tsai and R. Raj, J. Am. Ceram. Soc. 63, 513-517 (1980).
167. D. B. Sabljic and D. S. Wilkinson, Acta Metall. Mater. 43, 3937-3945 (1995).
168. H. Peterlik, J. Mater. Sci. 29, 2401-2405 (1994).
169. K. Kromp and R. F. Pabst, J. Am. Ceram. Soc. 66, 106-110 (1983).
170. H. G. Schmid, T. Haug, A. Bornhauser, V. Gerold and R. F. Pabst, Mater. Sci. Res. 18, 631-641 (1984).
171. A. Bornhauser, K. Kromp and R. F. Pabst, J. Mater. Sci. 20, 2586-2596 (1985).
172. K. Kromp, T. Haug, R. F. Pabst and V. Gerold, Proc. 3rd Int. Conf. on Creep and Fracture of Engineering Materials (edited by B. Wilshire and D. R. J. Owen), pp. 1021-1032. Pineridge Press, Swansea (1987).
173. H. Peterlik and K. Kromp, J. Mater. Sci. 28, 4341-4346 (1993).
174. H. Meredith and P. L. Pratt, Special Ceramics (edited by P. Popper), Vol. 6, p. 107. British Ceramic Research Association, Stoke-on-Trent (1975).
175. I-W. Chen, S.-Y. Liu and D. Jacobs, Acta Metall. Mater. 43, 1439-1446 (1995).
176. C. Gandhi and M. F. Ashby, Acta Metall. 27, 1565-1602 (1979).
177. G. D. Quinn, J. Mater. Sci. 25, 4361-4376 (1990).
178. G. D. Quinn and W. R. Braue, J. Mater. Sci. 25, 4377-4392 (1990).
179. D. R. Mosher, R. Raj and R. Kossowsky, J. Mater. Sci. 11, 49-53 (1976).
180. M. Shimada, K. Matsushita, S. Kuratani, T. Okamoto, M. Koizumi, K. Tsukuma and T. Tsukidate, J. Am. Ceram. Soc. 67, C23-C24 (1984).
181. P. Gadaud, B. Guisolan, A. Kulik and R. Schaller, Rev. Sci. Instrum. 61, 2671-2675 (1990).
182. G. Roebben, M. Steen and O. Van der Biest, Scripta Metall. Mater. 33, 1417-1421 (1995).
183. S. Sakaguchi, N. Murayama, Y. Kodama and F. Wakai, J. Alloys Compounds 211/212, 361-364 (1994).
184. G. Roebben, M. Steen and O. Van der Biest, Proc. Fatigue '96 Conf., Berlin, Germany (edited by G. Lûtjering and H. Nowack), Vol. 3, pp. 1699-1704. Elsevier Science, Amsterdam (1966).
185. G. Roebben, M. Steen, J. Bressers and O. Van der Biest, Proc. Int. Symp. on Fatigue under Thermal and Mechanical Loading, Petten, The Netherlands (edited by J. Bressers, L. Rémy, M. Steen and J. L. Vallés), pp. 249-258. Kluwer Academic, Dordrecht, The Netherlands (1996).
186. A. Lakki, R. Schaller, G. Bernard-Granger and R. Duclos, Acta Metall. Mater. 43, 419-426 (1995).
187. J.-L. Ding, K. C. Liu, C. R. Brinkman and S. Lin, J. Am. Ceram. Soc. 78, 3057-3066 (1995).
188. Y. Matsuo, Y. Hattori, Y. Katayama and I. Fukuura, Progress in Nitrogen Ceramics (edited by F. L. Riley), pp. 515-522. Martinus Nijhoff, The Hague (1983).
189. I. Oda, M. Matsui and T. Soma, Proc. Int. Gas Turbine Congress, Vol. II, pp. 149-154. The Gas Turbine Society of Japan, Tokyo, Japan (1987).
190. A. M. Thompson, H. M. Chan, M. P. Harmer and R. F. Cook, J. Am. Ceram. Soc. 78, 567-571 (1995).
191. T. Fett and D. Munz, paper presented at Advanced Materials Science and Engineering Society Conf. on Reliability of Structural Ceramics. Tokyo, Japan (1989).
192. R. F. Pabst, Proc. Festigkeitsseminar über Hochtemperatursreaktionen keramischer Werkstoffe unter besonderer Berücksichtigung nichtlinearer quasiplastischer Verformung (edited by R. F. Pabst), pp. 1-35. Stuttgart, Germany (1984).
193. M. G. Jenkins, M. K. Ferber and C.-K. J. Lin, J. Am. Ceram. Soc. 76, 788-792 (1993).
194. M. G. Jenkins, M. K. Ferber and C.-K. J. Lin, J. Mater. Sci. Lett. 12, 1940-1944 (1993).
195. C.-K. J. Lin and D. F. Socie, J. Am. Ceram. Soc. 74, 1511-1518 (1991).
196. C. H. Huang and J. K. Shang, Scripta Metall. Mater. 31, 1743-1748 (1994).
197. U. Ramamurthy, T. Hansson and S. Suresh, J. Am. Ceram. Soc. 77, 2985-2999 (1994).
198. C.-H. Huang and J. K. Shang, Acta Metall. Mater. 43, 4179-4187 (1995).
199. R. Kossowsky, J. Am. Ceram. Soc. 56, 531-535 (1973).
200. T. Fett, G. Himsolt and D. Munz, Adv. Ceram. Mater. 1, 179-184 (1986).
201. Y. Tajima, K. Urashima, M. Watanabe and Y. Matsuo, Proc. 3rd Int. Symp. on Ceramic Components for Engines (edited by V. J. Tennery), pp. 719-728. Las Vegas, NV (1988).
202. K. C. Liu, C. O. Stevens and C. R. Brinkman, Proc. 2nd European Ceramic Society Conf. (edited by G. Ziegler and H. Hausner), pp. 1261-1265. Freiburg, Germany (1991).
203. C.-K. J. Lin, M. G. Jenkins and M. K. Ferber, J. Mater. Sci. 29, 3517-3526 (1994).
204. N. Dey and D. F. Socie, Ceram. Engng Sci. Proc., Sept.-Oct., pp. 634-641 (1994).
205. T. Hansson, Y. Miyashita and Y. Mutoh, Proc. Fracture Mechanics of Ceramics Conf., Karlsruhe, Germany (in press).
206. D. Bolsch and J. Bressers, Proc. 1st European Ceramic Society Conf. (edited by G. de With, R. A. Terpstra and R. Metselaar), Vol. 3, pp. 205-209. Maastricht, The Netherlands (1990).
207. J. Zhang, R. J. Perez and E. J. Lavernia, J. Mater. Sci. 28, 2395-2404 (1993).
208. B. R. Lawn, B. J. Hockey and S. M. Wiederhorn, J. Mater. Sci. 15, 1207-1223 (1980).
209. M. D. Thouless, J. Am. Ceram. Soc. 71, 408-413 (1988).
210. C-K. J. Lin, D. F. Socie, Y. Xu and A. Zangvil, J. Am. Ceram. Soc. 75, 637-648 (1992).
211. N. Dey, D. F. Socie and K. J. Hsia, Acta Metall. Mater. 43, 2163-2175 (1995).
212. K. Jakus, J. E. Ritter and R. H. Schwillinski, J. Am. Ceram. Soc. 76, 33-38 (1993).
213. A. Reichl and R. W. Steinbrech, J. Am. Ceram. Soc. 71, C299-C301 (1988).
214. U. Ramamurty, J. Am. Ceram. Soc. 79, 945-952 (1996).
215. S.-Y. Liu, I.-W. Chen and T.-Y. Tien, J. Am. Ceram. Soc. 77, 137-142 (1994).
216. R. A. Page and J. Lankford, J. Mater. Sci. 22, 2521-2528 (1987).
217. T. Ohji, Y. Yamauchi, W. Kanematsu and S. Ito, J. Ceram. Soc. Japan 98, 1063-1069 (1990).
218. S. R. Choi and J. A. Salem, Ceram. Engng Sci. Proc., Sept.-Oct., pp. 589-596 (1994).
219. K. S. Chan and R. A. Page, J. Am. Ceram. Soc. 76, 803-826 (1993).
220. J. R. Porter, W. Blumenthal and A. G. Evans, Acta Metall. 29, 1899-1906 (1981).
221. W. Beere and D. Miller, Proc. 2nd Int. Conf. on Creep and Fracture of Engineering Materials (edited by B. Wilshire and D. R. J. Owen), Part II, pp. 1003-1014. Pineridge Press, Swansea (1984).
222. K. S. Chan, J. Lankford and R. A. Page, Acta Metall. 32, 1907-1914 (1984).
223. T. Ohji, S. Sakai, M. Ito, Y. Yamauchi, W. Kanematsu and S. Ito, High Temp. Technol. 5, 139-144 (1987).
224. M. Boussuge, D. Broussaud and J. Lamon, Proc. Brit. Ceram. Soc. 32, 205-212 (1983).
225. R. E. Tressler, Ceram. Trans. 10, 99-124 (1990).
226. R. Berriche and R. T. Holt, Ceram. Engng Sci. Proc., pp. 617-624 (1994).
227. S. R. Choi and V. Tikare, Scripta Metall. Mater. 26, 1263-1268 (1992).
228. O. Van der Biest, S. Valkiers, L. Garguet, P. Tambuyser and I. Baele, Proc. Brit. Ceram. Soc. 39, 33-44 (1987).
229. O. Van der Biest and C. Weber, Corrosion of Advanced Ceramics (edited by K. G. Nickel), pp. 453-463. Kluwer Academic, Dordrecht, The Netherlands (1994).
230. R. K. Govila, Bull. Am. Ceram. Soc. 65, 1287-1292 (1986).
231. F. F. Lange, S. C. Singhal and R. C. Kuznicki, J. Am. Ceram. Soc. 60, 249-252 (1977).
232. Y. G. Gogotsi and G. Grathwohl, J. Am. Ceram. Soc. 76, 3093-3104 (1993).
233. T. Sun, G. R. Pickrell and J. J. Brown Jr, J. Am. Ceram. Soc. 77, 3209-3214 (1994).
234. O. Van der Biest, J. Barnes, J. Corish and J. F. Norton, J. Am. Ceram. Soc. 70, 456-459 (1987).
235. H.-E. Kim and A. J. Moorhead, Ceram. Trans. 10, 81-96 (1990).
236. F. A. Costa Oliveira, R. J. Fordham and J. H. W. de Wit, Proc. 3rd European Ceramic Society Conf. (edited by P. Duran and J. F. Fernandez), pp. 973-978. Madrid, Spain (1993).
237. D. J. Baxter, T. Graziani, P. Moretto and V. Biasini, J. Mater. Sci. Lett. 12, 1533-1535 (1993).
238. O. Van der Biest, C. Weber and L. A. Garguet, Proc. 3rd Int. Symp. on Ceramic Components for Engines (edited by V. J. Tennery), pp. 729-738, Las Vegas, NV (1988).
239. O. Van der Biest and C. Weber, Ceram. Trans. 10, 125-139 (1990).
240. A. A. Wereszczak, K. Breder and M. K. Ferber, J. Am. Ceram. Soc. 76, 2919-2922 (1993).
241. G. Gauthier, M. A. Lamkin, F. L. Riley and R. J. Fordham, Proc. Brit. Ceram. Soc. 39, 55-59 (1987).
242. C. Saraiva Martins, M. Steen and L. Guerra Rosa, J. Mater. Sci. 29, 5158-5164 (1994).
243. M. Hoffmann, M. Steen, C. S. Martins and R. Danzer, Proc. 2nd Int. Conf. on Ceramics in Energy Applications, pp. 225-237. Institute of Energy, London (1994).
244. E. Gehrke, H. Riedel, W. Berweiler and J. Siebels, Proc. 23. Vortragsverantstaltung des DVM-Arbeitskreises Bruchvorgänge, pp. 339-347. DVM, Berlin, Germany (1991).
245. M. Boussuge and J. Lamon, J. Physique 47, CI557-CI562 (1985).
246. R. O. Ritchie and R. H. Dauskardt, J. Ceram. Soc. Japan Int. Ed. 99, 1047-1062 (1991).
247. R. Raj, J. Am. Ceram. Soc. 76, 2147-2174 (1993).
248. S. R. Choi, J. A. Salem, N. Nemeth and J. P. Gyekenyesi, Ceram. Engng. Sci. Proc. pp. 597-604 (1994).