Application of intelligent CNC in grinding

Computers in Industry

Volumn 31, Issue 1, 1996, Pages 45-60

  Rowe, W Brian ^a   Li, Y ^b   Mills, B ^a   Allanson, D R ^a  

^a LIVERPOOL JOHN MOORES UNIVERSITY   (United Kingdom)

^b SICHUAN UNIVERSITY   (China)

Author keywords

Artificial intelligence; CNC; Grinding

Indexed keywords

ARTIFICIAL INTELLIGENCE; CONTROL EQUIPMENT; GRINDING (MACHINING); INTELLIGENT CONTROL; NUMERICAL CONTROL SYSTEMS; OPTIMIZATION; PERSONAL COMPUTERS;

COMPUTER NUMERICAL CONTROL (CNC) SYSTEMS; MODULAR SYSTEMS;

COMPUTER CONTROL;

EID: 0030262119     PISSN: 01663615     EISSN: None     Source Type: Journal    
DOI: 10.1016/0166-3615(96)00036-X     Document Type: Article

References (60)

1. S.B. Billatos and P.C. Tseng, "Knowledge based optimisation for intelligent machining", Journal of Manufacturing Systems, Vol. 10, No. 6, 1992, pp. 464-474.
2. S.B. Billatos and J.A. Webster, "Knowledge-based expert system for ballscrew grinding", Automation of Manufacturing Processes ASME, Vol. 22, 1990, pp. 21-29.
3. Matthew L. Brown and Daniel E. Whitney, "Stochastic dynamic programming applied to planning of robot grinding task", Parts 1 and 2, Control of Manufacturing Processes, ASME, Vol. 28, 1991, pp. 115-123.
4. Y.T. Chen and Y.C. Shin, "Surface grinding process advisory system with fuzzy logic", Control of Manufacturing Processes, ASME Winter Annual Meeting, DSC Division, Vol. 28, 1991, pp. 67-77.
5. Y.P. Chang, A.E. Diniz and D.A. Dornfeld, "Monitoring the grinding process through acoustic emission using a squirter", Proceedings of the Japan-U.S.A. Symposium on Flexible Automation, ASME, San Francisco, 1992, pp. 335-340.
6. Y. Du, "Study of on-line intelligent monitoring system for grinding burn", Proceedings of the ASME 1992 Japan-U.S.A. Symposium on Flexible Automation, Part 2, San Francisco, 1992, pp. 1417-1420.
7. M. Sakakura and I. Inasaki, "Neural network approach to the decision-making process for grinding operations", Annals of the CIRP, Vol. 41, No. 1, 1992, pp. 353-356.
8. M. Sakakura and I. Inasaki, "Intelligent data base for grinding operations", Annals of CIRP, Vol. 42, No. 1, 1993, pp. 379-382.
9. H. Inoue, T. Suto and T. Waida, "A knowledge-based system for grinding", Proceedings of the 6th International Conference on Production Engineering, Osaka, 1987, pp. 377-382.
10. M. Junkar, B. Filipic and I. Bratko, "Identifying the grinding process by means of inductive machine learning", Computers in Industry, Vol. 17, 1991, pp. 147-153.
11. M. Junkar and B. Filipic, "Grinding process control through monitoring and machine learning", Proceedings of 3rd International Conference on Competitive Performance Through Advanced Technology, London, 1992, pp. 77-80.
12. W. Koenig and G. Werner, "Adaptive control optimisation of high efficiency external grinding concept: Technological basis and application", Annals of CIRP, Vol. 23, No. 1, 1974, p. 101.
13. W. Koenig, "Artificial intelligence and simulation in grinding processes", 11th European Congress on Operational Research, Aachen, 1991.
14. T.W. Liao and L.J. Chen, "A neural network approach for grinding process: Modelling and optimisation", International Journal of Machine Tools Manufacturing, Vol. 34, No. 7, 1994, pp. 919-937.
15. G. Amitay, S. Malkin and Y. Koren, "Adaptive control optimisation of grinding", Transactions of the ASME, Journal of Engineering for Industry, Vol. 103, 1981, pp. 103-108.
16. G. Xiao, S. Malkin and K. Danai, "Intelligent control of cylindrical plunge grinding", Proceedings of the American Control Conference, Vol. 1, Chicago, 1992, pp. 391-398.
17. G. Xiao, S. Malkin and K, Danai, "An autonomous system for cylindrical plunge grinding", Proceedings of NSF Design and Manufacturing Systems Conference, 1993, pp. 399-403.
18. P.S. Midha, C.B. Zhu and G.J. Trmal, "An expert system for wheel selection for cylindrical grinding operations", Proceedings of 6th International Conference on Computer Aided Production Engineering, London, 1990, pp. 445-450.
19. S. Midha, C.B. Zhu, G.J. Trmal, "An application of the expert system approach to the production grinding process", Proceedings of the 4th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, IEA/AIE-91, Hawaii, July 1991, pp. 330-337.
20. P.S. Midha, C.B. Zhu and G.J. Trmal, "Optimum selection of grinding parameters using process modelling and knowledge based system approach", Journal of Materials Processing Technology, Vol. 28, 1991, pp. 189-198.
21. C.B. Zhu, P.S. Midha and G.J. Trmal, "Development of knowledge base abrasive wheel selection system using a proprietary expert system shell", Proceedings of 4th International Congress on Condition Monitoring and Diagnostic Engineering Manufacturing, Selis, France, 1992, pp. 318-325.
22. K. Mori and N. Kasashima, "An expert system in process vibration monitoring and diagnostic system for cylindrical grinding", Proceedings of International ASME Conference on Signals and Systems, Chengdu, 12, 1990, pp. 66-76.
23. K. Mori, N. Kasashima, T. Yamane and T. Nakai, "Intelligent vibration diagnostic system for cylindrical grinding", Proceedings of the Japan-U.S.A. Symposium on Flexible Automation, San Francisco, Part 2, 1992, pp. 1097-1100.
24. J.C. Fu, K. Mori and M. Yokomichi, "The applications of entropy functions in on-line vibration classification for cylindrical grinding", International Journal of Production Research (to be published), 1993.
25. K. Nagasaka, Y. Kita, Y, Kitaguchi and A. Tanibayashi, "The construction of expert systems for the grinding process", Journal of the Japan Society of Precision Engineering, Vol. 57, No. 9, 1991, pp. 1661-1666.
26. T. Nakajima, S. Tsukamoto, D. Murakami and K. Kurata, "Fuzzy in-process control plunge grinding techniques", Journal of the Japan Society of Precision Engineering, Vol. 58, No. 2, 1992, pp. 313-318.
27. T. Paul and H. Hosch, "Simulation der Randzonenbeeinflussung beim Schleifen unter Verwendung der Fuzzy Logic", ZwF, Vol. 88, No. 2, 1993, pp. 67-70.
28. B.C. Roberts and D.C. Brown, "Using simulation techniques to improve skeletal plants for the control of a vertical internal grinding machine", Proceedings of the 22nd Annual Simulation Symposium, Tampa, U.S.A., 1989, pp. 153-160.
29. D.R. Allanson, D.A. Thomas, J.L. Moruzzi and W.B. Rowe, "Adaptive and learning strategies for CNC grinding", Proceedings SERC ACME Conference, 1992, pp. 84-89.
30. S. Kelly, W.B. Rowe and J.L. Moruzzi, "Adaptive grinding control", Advanced Manufacturing Engineering, Vol. 1, Butterworths, 1989, pp. 287-295.
31. Y. Li, B. Mills, J.L. Moruzzi and W.B. Rowe, "Grinding wheel selection using a neural network", Proceedings of 10th National Manufacturing Research Conference (published by Taylor and Francis Ltd., Loughborough, 13-15 September), 1994, pp. 597-601.
32. J. Liverton, D.A. Thomas, D.R. Allanson and W.B. Rowe, "Adaptive control of cylindrical grinding", Proceedings of SME 5th International Grinding Conference, 1993.
33. W.B. Rowe, M. Miyashita and W. Koenig, "Centreless grinding research and its application in advanced manufacturing technology", Keynote Paper, Annals of CIRP, Vol. 38, No. 2, 1989, pp. 1-9.
34. W.B. Rowe, D.R. Allanson, J.A. Pettit, J.L. Moruzzi and S. Kelly, "Intelligent CNC for grinding", Proceedings of the Institution Mechanical Engineers, Vol. 205, 1991, pp. 233-239.
35. W.B. Rowe, D.R. Allanson, D.A. Thomas and J.L. Moruzzi, "Intelligent CNC for grinding - Problems of accuracy control" (presented to CIRP Abrasive Processes Scientific Technical Committee in Paris), 1993.
36. W.B. Rowe, D.A. Thomas, D.R. Allanson and J.L. Moruzzi, "Intelligent CNC for grinding, the manufacturing engineer", Proceedings of IEE, 1994.
37. G. Sathyanarayanan, I.J. Lin and M.K, Chen, "Neural network modelling and multi-objective optimization of creep feed grinding of superalloys", International Journal of Production Research, Vol. 30, No. 10, 1992, pp. 2421-2438.
38. T. Tanaka, "Simulation tracking on the wear process of grinding wheel by the fuzzy inference", Proceedings of the 1992 Japan-U.S.A. Symposium on Flexible Automation, Part 2, Kyoto, 1992, pp. 1023-102.
39. H.K. Tönshoff and T. Paul, "Rationalisierungspotentiale mit schleif-technischem Informationssystem ausschoepfen", ZwF, Vol. 86, No. 11, 1991, pp. 572-575.
40. H.K. Tönshoff, I. Inasaki and A. Walter, "Prozessregelung beim Innen-rundschleifen mit unscharfer Logik", ZwF, Vol. 88, No. 6, 1993, pp. 282-284.
41. H.K. Tönshoff, J. Peters, I. Inasaki and T. Paul, "Modelling and simulation of grinding processes", Keynote Paper, Annals of CIRP, Vol. 41, No. 2, 1992, pp. 677-688.
42. H.K. Tönshoff, M. Zinngrebe, Kemmerling, "Optimisation of internal grinding by microcomputer based force control", Annals of CIRP, Vol. 35, No. 1, 1986, pp. 293-296.
43. G.J. Trmal, C.B. Zhu and P.S. Midha, "An expert system for grinding process optimisation", Journal of Materials Processing, Vol. 33, 1992, pp. 507-517.
44. N. Ueda, T. Matsuo, Y. Obuchi and H. Nomura, "Expert system for grinding", Proceedings of 3rd International Grinding Conference, Wisconsin. 1988.
45. S. Venk and R. Govind, "An expert system approach to optimization of the centreless grinding process", Annals of CIRP, Vol. 39, No. 1, 1990, pp. 489-492.
46. S. Venk, "A systems approach for decision making in production grinding", Annals of CIRP, Vol. 40 No. 1, 1991, pp. 445-449.
47. S. Venk, C.A. Smits and R. Govind, "Sensor-based information module to aid intelligent decision making in grinding", Journal of Manufacturing Systems, Vol. 11, No. 1, 1992.
48. A. Walter and J. Fassmer, "Selbsteilender Fuzzy-Regler zur Prozessregelung beim Innenrundschleifen", 3rd Aachener Fuzzy Symposium, Frankfurt, 1993.
49. H.G. Wobker and T. Paul, "Control of the internal grinding with fuzzy logic", Correspondence, 1993.
50. T. Yoneda, S. Hattori and Y. Kakazu, "Study on optimization of grinding conditions using neural network on learning method when lacking a portion of learning data and detecting method of heterogeneous data", Journal of the Japan Society of Precision Engineering, Vol. 58, No. 7, 1992, pp. 1239-1244.
51. T. Yoneda, M. Yamanaka and Y. Kakazu, "Study on optimization of grinding conditions using neural networks - A method of additional learning", Journal of the Japan Society of Precision Engineering, Vol. 58, No. 10, 1992, pp. 1707-1712.
52. J. Webster and Y.W. Zhao, "Time optimum adaptive control of plunge grinding", International Journal of Machine Tools and Manufacturing, Vol. 30, No. 3, 1989, pp. 413-412.
53. Y.W. Zhao and J. Webster, "Fuzzy pattern recognition and automatic steady control in roller grinding", Proceedings of 2nd IEEE International Conference of Computer Integrated Manufacturing, 1990, pp. 395-401.
54. V.D. Hunt, Artificial Intelligence and Expert Systems Source Book, Chapman Hall, 1986.
55. R. Shoureshi, "Intelligent control systems - Are they for real?", ASME Journal of Dynamic Systems, Vol. 115, 1993, pp. 392-407.
56. C.B. Zhu, "Optimisation of the grinding process using process modelling and knowledge based system approach", Ph.D. Thesis, University of the West of England, Bristol, 1992.
57. R. Wada and H. Kodama, "Adaptive control in grinding", Bull Japan Society of Precision Engineers, Vol. 11, No. 1, 1977, p. 1.
58. W.B. Rowe, M.N. Morgan and D.A. Allanson, "An advance in the modelling of thermal effects in the grinding process", Annals of CIRP, Vol. 40, No. 1, 1991, pp. 339-342.
59. W.B. Rowe, J.A. Pettit, A. Boyle and J.L. Moruzzi, "Avoidance of thermal damage in grinding and prediction of the damage threshold", Annals of CIRP, Vol. 37, No. 1, 1988, pp. 327-330.
60. W.B. Rowe, S.C.E. Black, B. Mills, H.S. Qi and M.N. Morgan, "Experimental investigation of heat transfer in grinding", Annals of CIRP, Vol. 44, No. 1, 1995, pp. 329-332.