Boiling and nonboiling heat transfer to electrolyte solutions

Heat Transfer Engineering

Volumn 17, Issue 4, 1996, Pages 46-63

  Najibi, S H ^a   Muller Steinhagen H ^a   Jamialahmadi, M ^b  

^a UNIVERSITY OF SURREY   (United Kingdom)

^b NATIONAL IRANIAN OIL COMPANY   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

BOILING LIQUIDS; BUBBLE FORMATION; ELECTROLYTES; HEAT CONVECTION; HEAT TRANSFER COEFFICIENTS; HEATING EQUIPMENT; NUCLEATION; SALTS; SOLUTIONS;

BUBBLE SIZE; ELECTROLYTE SOLUTIONS; NUCLEATION SITE DENSITY; POOL BOILING; SUBCOOLED FLOW BOILING HEAT TRANSFER;

HEAT TRANSFER;

EID: 0030261502     PISSN: 01457632     EISSN: 15210537     Source Type: Journal    
DOI: 10.1080/01457639608939884     Document Type: Article

References (33)

1. Cryder, D. S., and Gilliland, E. R., Heat Transmission from Metal Surfaces to Boiling Liquids, Ind. Eng. Chem., vol. 24, pp. 1382–1387, 1932.
2. Cryder, D. S., and Finalboro, A. C., Heat Transmission from Metal Surfaces to Boiling Liquids Effect of Temperature of the Liquid on the Liquid Film Coefficient, AJChE Trans., vol. 33, pp. 346–361, 1937.
3. Knowles, J. W., Heat Transfer with Surface Boiling, Can. J. Res., vol. 26, pp. 268–278, 1948.
4. Tolubinsky, V. I., and Ostrovsky, J. N., On the Mechanism of Boiling Heat Transfer, Int. J. Heat Mass Transfer, vol. 9, pp. 1463–1470, 1966.
5. Steinbrecht, D., Beitrag zur Untersuchung der Dampf-blasenbildung bei Mehrstoffgemischen, Wiss. Z. Tech. Hochsch. Magdeburg, vol. 12, no. 2/3, pp. 505–513, 1968.
6. Fritz, W., Berechnung des Maximalvolumens von Dampfblasen, Phys. Z., vol. 36, pp. 379–384, 1935.
7. Ceumern-Lindenstjerna, W. C., Bubble Departure Diameter and Release Frequencies during Nucleate Pool Boiling of Water and Aqueous Sodium Chloride Solu-tions, in E. Hahne and U. Grigull (Eds.), Heat Transfer Boiling, pp. 53–75, Hemisphere, New York, 1997.
8. Jamialahmadi, M., and Miiller-Steinhagen, H., Pool Boiling Heat Transfer to Electrolyte Solutions, Chem. Eng. Process, vol. 28, pp. 79–88, 1990.
9. Jamialahmadi, M., Blochl, R., and Miiller-Steinhagen, H., Pool Boiling Heat Transfer to Saturated Water and Refrigerant 113, Can. J. Chem. Eng., vol. 64, pp. 746–754, 1990.
10. Wenzel, U., Saturated Pool Boiling and Subcooled Flow Boiling of Mixtures, Ph.D. thesis, University of Auckland, Auckland, New Zealand, 1992.
11. Berghmans, J., Stability of Gas Bubbles Rising in Invis-cid Fluids, Chem. Eng. Sci., vol. 28, pp. 2005–2011, 1973.
12. Petukhov, B. S., and Popov, V. N., Theoretical Calculation of Heat Exchanger and Frictional Resistance in Turbulent Flow in Tubes of an Incompressible Fluid with Variable Physical Properties, High Temp. (USSR), vol. 1, pp. 69–83, 1963.
13. Gnielinski, V., Wärmeübertragung in Rohren, VDI-Wärmeatlas, 5th ed., VDI-Verlag, Dusseldorf, 1986.
14. Filonenko, G. K., Hydraulic Resistance in Pipes, Teploenergetika, vol. 1, pp. 40–44, 1954.
15. Kays, W. M., and Crawford, M. E., Convectiue Heat and Mass Transfer, McGraw-Hill, New York, 1980.
16. Witaker, S., Forced Convection Heat Transfer Correlations for Flow in Pipes, Past Flat Plates, Single Cylinders, Single Spheres and for Flow in Packed Beds and Tube Bundles, AlChE J., vol. 18, pp. 361–371, 1972.
17. Schliinder, E. U., Einfuhrung in die Wdrme-and Stoffubertragung, Vieweg-Verlag, 1975.
18. Gorenflo, D., Pool boiling, VDI-Wdrmeatlas, 5th ed., VDI-Verlag, Dusseldorf, 1988.
19. teiner, D., and Taborek, J., Flow Boiling Heat Transfer in Vertical Tubes Correlated by an Asymptotic Model, Heat Transfer Eng., vol. 13, pp. 43–69, 1992.
20. Stephan, K., and Preusser, P., Warmeiibergang und max-imale Warmestromdichte beim Behaltersieden binarer und ternarer Fliissigkeitsgemische, Chem. Ing. Tech., MS 649/79, 1979.
21. Stephan, K., Beitrag zur Thermodynamik des Warmeiibergangs beim Seiden, Abh. Dtsch. Kaltetech, Ver. Nr. 18, C. F. Miiller, Karlsruhe, 1964.
22. HTFS Seminar on Heat Transfer Fouling, New Orleans, LA, 1986, Heat Transfer and Fluid Flow Series, Harwell, UK.
23. Lorenz, J. J., Mikic, B. B., and Rohsenow, W. M., The Effect of Surface Conditions on Boiling Characteristics, Proc. Fifth Int. Heat Transfer Conf., Tokyo, vol. 4, pp. 35–39, 1974.
24. Mikic, B. B., and Rohsenow, W. M., A New Correlation of Pool Boiling Data Including the Effect of Heat Surface Characteristics; J. Heat Transfer, vol. 5, pp. 245–250, 1969.
25. Blöchl, R., Zum Einfluss der Oberflächenstruktur unter-schiedlich bearbeiteter Heizflachen auf die Wärmeübertragung beim Blasensieden, Ph.D. thesis, University of Karlsruhe, 1986.
26. Shoukri, M., and Judd, R. L., On the Influence of Surface Conditions in Nucleate Boiling-The Concept of Bubble Flux Density, Trans. ASME, vol. 100, pp. 618–623, 1987.
27. Chen, J. C., Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow, Ind. Eng. Chem. Process Design Develop., vol. 5, pp. 322–329, 1966.
28. Butterworth, D., and Shoch, R. A. W., Proc. 7th Int. Heat Transfer Conf., Munich, Paper Rkl 5, 1982.
29. Schroder, J. J., Heat Transfer during Subcooled Boiling, VDI-Wdrmeatlas, 5th ed., VDI-Verlag, Dusseldorf, 1988.
30. Jamialahmadi, M., and Miiller-Steinhagen, H., Forced Convective and Subcooled Flow Boiling Heat Transfer to Spent Bayer Liquor, Light Metals, pp. 141–150, 1991.
31. Wenzel, U., Hartmuth, B., and Mulller-Steinhagen, H., Heat Transfer to Ternary Mixtures of Acetone, Iso-propanol and Water under Subcooled Flow Boiling Conditions. Part I Experimental Results, Int. J. Heat Mass Heat Transfer, vol. 37, no. 2, pp. 175–183, 1994.
32. Wenzel, U., and Miiller-Steinhagen, H., Heat Transfer to Ternary Mixtures of Acetone, Isopropanol and Water under Subcooled Flow Boiling Conditions. Part II Prediction Model, Int. J. Heat Mass Heat Transfer, vol. 37, no. 2, pp. 185–194, 1994.
33. Branch, C. A., Heat Transfer and Heat Transfer Fouling in Evaporators with Kraft Pulp Black Liquor, Ph.D. thesis, University of Auckland, Auckland, New Zealand, 1991.