The role of matrix molecular weight in rubber toughened nylon 6 blends: 2. Room temperature Izod impact toughness

Polymer

Volumn 37, Issue 22, 1996, Pages 4909-4918

  Oshinski, A J ^a   Keskkula, H ^a   Paul, D R ^a  

^a The University of Texas at Austin   (United States)

Author keywords

Izod impact; Nylon 6; Toughening

Indexed keywords

BLOCK COPOLYMERS; BUTADIENE; ELASTOMERS; IMPACT RESISTANCE; MOLECULAR WEIGHT; POLYMER BLENDS; RUBBER; STRENGTH OF MATERIALS; STYRENE; TOUGHENING; TOUGHNESS;

IZOD IMPACT; IZOD IMPACT TOUGHNESS; NYLON 6; NYLON 6 BLENDS; RANDOM COPOLYMERS;

NYLON POLYMERS;

EID: 0030259382     PISSN: 00323861     EISSN: None     Source Type: Journal    
DOI: 10.1016/0032-3861(96)00374-6     Document Type: Article

References (51)

1. Abbate, M., Di Liello, V., Martuscelli, E., Musto, P., Ragosta, G. and Scarinzi, G. Polymer 1992, 33, 2940
2. Martuscelli, E., Riva, F., Sellitti, C. and Silvestre, C. Polymer 1985, 26, 270
3. Greco, R., Malinconico, M., Martuscelli, E., Ragosta, G. and Scarinzi, G. Polymer 1987, 28, 1185
4. Majumdar, B., Keskkula, H. and Paul, D. R. Polymer 1994, 35, 1386
5. Lawson, D. F., Hergenrother, W. L. and Matlock, M. G. J. Appl. Polym. Sci. 1990, 39, 2331
6. Ban, L. L., Doyle, M. J., Disko, M. M. and Smith, G. R. Polym. Commun. 1988, 29, 163
7. Flexman, E. A. Polym. Eng. Sci. 1979, 19, 564
8. Gilmore, D. W. and Modic, M. J. Plastics Eng. 1989, April, 29
9. Modic, M. J., Gilmore, D. W. and Kirkpatrick, J. P., Proc. First Int. Cong. on Compatibilization and Reactive Polymer Alloying (Compalloy '89), New Orleans, LA, 1989, p. 197
10. Gelles, B., Modic, M. and Kirkpatrick, J. Soc. Plast. Eng., ANTEC 1988, 34, 513
11. Gilmore, D. and Modic, M. J. Soc. Plast. Eng., ANTEC 1989, 35, 1371
12. Modic, M. J. and Pottick, L. A. Plast. Eng. 1991, 7, 37
13. Wu, S. Polym. Eng. Sci. 1987, 27, 335
14. Wu, S. Polymer 1985, 26, 1855
15. Wu, C. J., Kuo, J. F. and Chen, C. Y. Polym. Eng. Sci. 1993, 33, 1329
16. Wu, C. J., Kuo, J. F., Chen, C. Y. and Woo, E. J. Appl. Polym. Sci. 1994, 52, 1695
17. Borggreve, R. J. M. and Gaymans, R. J. Polymer 1989, 30, 63
18. Dijkstra, K., ter Laak, J. and Gaymans, R. J. Polymer 1994, 35, 315
19. Dijkstra, K., Wevers, H. H. and Gaymans, R. J. Polymer 1994, 35, 323
20. Dijkstra, K. and Gaymans, R. J. Polymer 1994, 35, 332
21. Oshinski, A. J., Keskkula, H. and Paul, D. R. Polymer 1992, 33, 268
22. Oshinski, A. J., Keskkula, H. and Paul, D. R. Polymer 1992, 33, 284
23. Fayt, R., Jerome R. and Teyssie, R. ACS Symp. Ser. 1989, 395, 38
24. Lambla, M., Yu, R. X. and Lorek, S. ACS Symp. Ser. 1989, 385, 67
25. Cimmino, S., Coppola, F., D'Orazio, L., Greco, R., Maglio, G., Malinconinco, M., Mancarella, C., Martuscelli, E. and Ragosta, G. Polymer 1986, 27, 1874
26. Bucknall, C. B., 'Toughened Plastics', Applied Science, London, 1977
27. Oshinski, A. J., Keskkula, H. and Paul, D. R. Polymer, 1996, 37, 4891
28. Huang, Y. L. and Brown, N. J. Mater. Sci. 1988, 23, 3648
29. Muratoglu, O. K., Argon, A. S. and Cohen, R. E. Polymer 1995, 36, 921
30. Turska, E. and Gogolewski, S. Polymer 1971, 12, 616, 629
31. Oshinski, A. J., Ph.D. Thesis, University of Texas at Austin, 1995
32. Dijkstra, K., Ph.D. Dissertation, University of Twente, 1993
33. Kinloch, A. J., Shaw, S. J., Tod, D. A. and Hunston, D. L. Polymer 1983, 24, 1341
34. Kinloch, A. J. and Young, R. J. 'Fracture Behavior of Polymers', Elsevier Applied Science, London, 2nd Ed., 1985
35. Kohan, M. I. 'Nylon Plastics', J. Wiley and Sons, New York, 1977
36. Parker, D. S., Sue, H.-J., Huang, J. and Yee, A. F. Polymer 1990, 31, 2266
37. Kayano, Y., Keskkula, H. and Paul, D. R. Polymer, submitted
38. Borggreve, R. J. M., Gaymans, R. J., Schuijer, J. and Ingen Housz, J. F. Polymer 1987, 28, 1489
39. Hobbs, S. Y., Bopp, R. C. and Watkins, V. H. Polym. Eng. Sci. 1983, 23, 380
40. Modic, M. and Pottick, L. Plast. Eng. 1991, 7, 37
41. Liu, N. C. and Baker, W. E. Polym. Eng. Sci. 1992, 32, 1695
42. Bucknall, C. B. and Lazzeri, A. J. Mater. Sci. 1993, 28, 6799
43. Bucknall, C. B., Karpodinis, A. and Zhang, X. C. J. Mater. Sci. 1994, 29, 3377
44. Fukui, T., Kikuchi, Y. and Inoue, T. Polymer 1991, 32, 2367
45. Borggreve, R. J. M., Gaymans, R. J. and Eichenwald, H. M. Polymer 1989, 30, 78
46. Seo, Y., Hwang, S. S., Kim, K. U., Lee, J. and Hong, S. Polymer 1993, 34, 1667
47. Oxborough, R. J. and Bowden, P. B. Phil. Mag. 1974, 30, 171
48. Goodier, J. N. Trans. Am. Soc. Mech. Eng. 1933, 55, 39
49. Epstein, B. N., U.S. Patent 4,174,358, 1979
50. Epstein, B. N., U.S. Patent 4,172,859, 1979
51. Oostenbrink, A. J., Molenaar, L. J. and Gaymans, R. J. Polyamide-rubber blends: influence of very small rubber particle sizes on impact strength, Poster given at 6th Annual Meeting of Polymer Processing Society, Nice, France, 18-20 April 1990