Application of hot workability studies to extrusion processing: Part II. Microstructural development and extrusion of Al, Al-Mg, and Al-Mg-Mn alloys

Canadian Metallurgical Quarterly

Volumn 35, Issue 4, 1996, Pages 305-319

  McQueen, H J ^a   Celliers, O C ^b  

^a Gina Cody School of Engineering and Computer Science   (Canada)

^b Comalco Research Centre ^*  (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM ALLOYS; GRAIN GROWTH; MECHANICAL PROPERTIES; METAL EXTRUSION; METAL RECOVERY; METALLOGRAPHIC MICROSTRUCTURE; RECRYSTALLIZATION (METALLURGY); STRAIN HARDENING; STRAIN RATE; THERMAL EFFECTS;

DEFORMATION ZONE; DYNAMIC RECOVERY; DYNAMIC RECRYSTALLIZATION; STATIC RECRYSTALLIZATION;

HOT WORKING;

EID: 0030259261     PISSN: 00084433     EISSN: None     Source Type: Journal    
DOI: 10.1016/s0008-4433(96)00011-0     Document Type: Review

References (115)

1. H. J. McQueen and O. Celliers, Materials Forum, 17, 1-13 (1993).
2. H. J. McQueen, Metals Forum (Aust), 4, 81-91 (1981).
3. H. J. McQueen, Hot Deformation of Aluminium Alloys (edited by T. G. Langdon et al.), pp. 31-44. Met. Soc. AIME, Warrendale, PA (1991).
4. H. J. McQueen, Hot Deformation of Aluminium Alloys (edited by T. G. Langdon et al.), pp. 105-120. Met. Soc. AIME, Warrendale, PA (1991).
5. H. J. McQueen, E. Evangelista and M. E. Kassner, Z. Metalkde, 82, 336-345 (1991).
6. H. J. McQueen and M. E. Kassner, Superplasticity in Aerospace II (edited by T. R. McNelley), pp. 189-296. Met. Soc. AIME, Warrendale, PA (1990).
7. H. J. McQueen and J. J. Jonas, 2nd Intl. Conf. Properties of Al Alloys (edited by C. Q., Chen), pp. 727-742. International Academic Publishers, Beijing (1990).
8. H. J. McQueen and K. Conrod, Microstructure Control in Aluminium Alloys (edited by E. H. Chia and H. J. McQueen), pp. 197-219. TMS-AIME, Warrendale, PA (1986).
9. H. J. McQueen and E. Evangelista, Czech. J. Phys., B38, 359-372 (1988).
10. E. A. Starke and J. C. Williams, Deformation, Processing and Structure (edited by G. Krausz), pp. 279-354. ASM, Metals Park, Ohio (1984).
11. H. J. McQueen and H. Mecking, Creep and Fracture of Engineering Materials and Structures (edited by B. Wilshire). pp. 169-184. Pineridge Press, Swansea, UK (1984).
12. H. J. McQueen, Thermomechanical Processing of Al Alloys (edited by J. G. Morris), pp. 1-24. Met. Soc. AIME (1979); J. Met. 32(2), 17-36.
13. H. J. McQueen, Thermomechanical Processing of Al Alloys (edited by J. G. Morris), pp. 1-24. Met. Soc. AIME (1979); J. Met. 32(2), 17-36.
14. H. J. McQueen, E. Evangelista and N. D. Ryan, Recrystallization ('90) in Metals and Materials (edited by T. Chandra), pp. 89-100. TMS-AIME, Warrendale, PA (1990).
15. H. J. McQueen, Mat. Sci. Eng., A101, 149-160 (1987).
16. H. J. McQueen and D. L. Bourell, J. Met.. 39(7), 28-35 (1987).
17. H. J. McQueen and J. J. Jonas, J. Appl. Metal Working, 3, 233-241 (1984).
18. H. J. McQueen and J. J. Jonas, J. Appl. Metal Working, 3, 410-420 (1985).
19. H. Mecking and G. Gottstein, Recrystallization of Metallic Materials (edited by F. Haessner), pp. 195-212. Dr. Reidereer Verlag, Stuttgart (1977).
20. H. J. McQueen, Met. Trans., 8A, 807-824 (1977).
21. H. J. McQueen and J. J. Jonas, Plastic Deformation of Materials (Treatise on Mat. Sci. Tech., Vol. 6 (edited by R. J. Arsenault), pp. 393-493. Academic Press, New York (1975).
22. C. M. Sellars, W. J. McG. Tegart, Int. Met. Rev., 17, 1-24 (1972).
23. H. J. McQueen and M. E. Kassner, Superplasticity in Aerospace (edited by H. C. Heikkenen and T. R. McNelley), pp. 77-96. Met. Soc. AIME, Warrendale, PA (1988).
24. W. A. Wong, H. J. McQueen and J. J. Jonas, J. Inst. Met., 95, 129-137 (1967).
25. H. J. McQueen, W. A. Wong and J. J. Jonas, Can. J. Phys., 45, 1225-1239 (1967).
26. H. J. McQueen and N. Ryum, Scand. J. Met., 14, 183-194 (1985).
27. Conrod, K. and McQueen, H. J., Aluminum Alloys, Physical and Mechanical Properties (edited by E. A. Starke and T. H. Sanders), Vol. 1, pp. 435-447. Eng. Mat. Advisory Service, Warley UK (1987).
28. G. Avramovic-Cingara and H. J. McQueen, Dispersion Strengthening in Al-Alloys (edited by Y. Kim and W. Griffith), pp. 437-450. Met. Soc., AIME, Warrendale PA (1988).
29. I. Szkrumelak, K. Conrod and H. J. McQueen, Aluminium, 64, 1151-1156 (1988).
30. B. Nicklas and H. Mecking, Strength of Metals and Alloys, ICSMA 5 (edited by P. Haasen et al.), pp. 351-355. Pergamon Press, Oxford (1979).
31. D. J. Lloyd, Met. Trans., 11A, 1287-1294 (1980).
32. V. K. Lindroos, H. M. Miekk-oja, Phil. Mag., 16, 1225-1234 (1967).
33. H. J. McQueen, J. K. Solberg, N. Ryum and E. Nes, Aluminum Alloys, Physical and Mechanical Properties (edited by E. A. Starke and T. H. Sanders), pp. 513-528. EMAS, Worley, UK (1986).
34. J. K. Solberg, H. J. McQueen, N. Ryum and E. Nes, Phil. Mag., 60, 447-485 (1989).
35. M. E. Kassner, M. M. Myshlyaev and H. J. McQueen, Mater. Sci. Eng., A108, 45-61 (1989).
36. A. Orlova and J. Cadek, Mater. Sci. Eng., 81, 371-377 (1986).
37. D. Caillard and J. L. Martin, Acta Met., 31, 813-825 (1983).
38. W. Blum, Hot Deformation of Al Alloys (edited by T. G. Langdon et al.), pp. 181-210. Met. Soc. AIME, Warrendale, PA (1991).
39. H. J. McQueen, W. Blum, Q. Zhu and V. Demuth, Advances in Hot Deformation Textures and Microstructures (edited by T. R. Bieler et al.), pp. 230-235. TMS-AIME, Warrendale, PA (1993).
40. A. F. Castle and T. Sheppard, Met. Tech., 2, 454-464 (1976).
41. T. Sheppard, M. G. Tutcher and H. M. Flower, Met. Sci., 13, 473-481 (1979).
42. T. Sheppard, Met. Tech., 8, 130-141 (1981).
43. T. Sheppard, Proc. 8th Light Metal Congress (edited by J. Jeglitsch et al.), pp. 301-311. The University, Leoben (1987).
44. D. Raybould and T. Sheppard, J. Inst. Met., 101, 45-72 (1973).
45. T. Sheppard and M. G. Tutcher, Met. Sci., 14, 579-589 (1980).
46. T. Sheppard and M. G. Tutcher, Met. Tech., 8, 319-327 (1981).
47. T. Sheppard, S. J. Paterson and M. G. Tutcher, Microstructural Control in Al Alloys (edited by E. H. Chia and H. J. McQueen), pp. 123-154. Met. Soc. AIME, Warrendale, PA (1986).
48. Ch. Perdrix, M. Y. Perrin and F. Montheillet, Mem. Et. Sci. Rev. Métal., 78, 309-320 (1981).
49. F. R. Castro-Fernandez and C. M. Sellars, Mater. Sci. Tech., 4, 621-627 (1988).
50. H. J. McQueen and J. E. Hockett, Met. Trans., 1, 2997-3004 (1970).
51. R. J. McElroy and Z. C. Szkopiak, Int. Met. Rev., 17. 175-202 (1972).
52. S. V. Raj and G. M. Pharr, Mater. Sci. Eng., 81, 217-237 (1986).
53. H. J. McQueen, E. Evangelista, J. Bowles and G. Crawford, Met. Sci., 18, 395-402 (1984).
54. E. Evangelista, H. J. McQueen and E. Bonetti, Deformation of Multi-Phaseand Particle Containing Materials (edited by J. BildeSorenson et al.), pp. 243-250. Riso Natl. Lab., Roskilde, Denmark (1983).
55. M. Ueki and T. Nakamura, Trans. JIM, 17, 139-148 (1976).
56. E. Usui, T. Inaba and N. Shiman, Z. Metallkd., 77, 179-693 (1986).
57. E. Usui, T. Inaba and N. Shiman, Z. Metallkd., 76, 426-791 (1985).
58. H. J. McQueen, H. Chia and E. A. Starke, Microstructural control in Al Alloy Processing (edited by H. Chia and H. J. McQueen), pp. 1-18. TMS-AIME, Warrendale, PA (1985).
59. A. F. Castle and T. Sheppard, Met. Tech., 2, 465-475 (1976).
60. A. Plumtree and G. Deep, Met. Tech., 4, 1-5 (1977).
61. H. Hero and C. J. Simenson, Scand. J. Metal. 1, 115-120 (1972).
62. T. Sheppard, M. A. Zaidi, M. G. Tutcher and N. C. Parson, Microstructural Control in Al Alloy Processing (edited by H. Chia and H. J. McQueen), pp. 155-178. TMS-AIME, Warrendale, PA (1985).
63. S. J. Paterson and T. Sheppard, Met. Tech., 9. 389-398 (1982).
64. T. Sheppard and R. P. Vierod, Mater. Sci. Tech., 3, 285-290 (1987).
65. T. Sheppard, Proc. 3rd Intl. Al Extrusion Tech. Sem. Alum. Assoc., Wash., 1, 107-123 (1984).
66. T. Sheppard and E. P. Wood, Met. Tech., 7, 58-66 (1980).
67. T. Sheppard, P. J. Tunnicliffe and S. J. Paterson, J. Mech. Work. Tech., 6, 313-331 (1982).
68. M. Ueki, S. Horie and T. Nakamura, Aluminum Alloys Physical and Mechanical Properties (edited by E. A. Starke and T. H. Sanders), pp. 419-122. EMAS, Warley UK (1986).
69. T. Sheppard, N. C. Parson and M. A. Zaidi, Met. Sci., 71, 481-490 (1983).
70. K. G. Gardiner and R. Grimes, Met. Sci., 13, 216-222 (1979).
71. F. J. Humphreys and M. R. Drury, Aluminum Technology (edited by T. Sheppard), pp. 191-196. Inst. Metals, London (1986).
72. M. R. Drury, F. J. Humphreys, Acta Met., 34, 2259-2271 (1986).
73. G. A. Henshall, M. E. Kassner and H. J. McQueen, Met. Trans. A., 23A, 881-889 (1992).
74. J. R. Cotner, W. J. McG. Tegart, J. Inst. Metals, 97, 73-79 (1969).
75. M. Raghaven and E. Shapiro, Met. Trans., 11A, 117-121 (1980).
76. T. G. Langdon, Strength of Metals and Alloys (ICSMA 5) (edited by H. J. McQueen et al.), pp. 1105-1120. Pergamon Press, Oxford (1982).
77. E. Nes, Recrystallization and Grain Growth, of Multiphase, Particle Containing Material, pp. 85-95. Riso Natl. Lab., Roskilde, Denmark (1980).
78. E. Nes, Met. Sci., 13, 211-215 (1979).
79. F. J. Humphreys, Acta Met., 25, 1323-1344 (1977).
80. F. J. Humphreys and P. Kalu, Acta Met., 35, 2815-2829 (1987).
81. M. A. Zaidi and T. Sheppard, Met. Sci., 16, 2229-2238 (1982).
82. E.-W. Lee, T. R. McNelley and A. F. Stengel, Met. Trans., 17A, 1043-1050 (1986).
83. S. J. Hales, T. R. McNelley and H. J. McQueen, Met. Trans. A., 21, 1037-1047 (1990).
84. B. M. Watts, M. J. Stowell, B. L. Baikie and D. G. E. Øwen, Met. Sci., 10, 189 (1976).
85. D. J. Abson and J. J. Jonas, Met. Sci., 4, 24-28 (1970).
86. H. J. McQueen and W. B. Hutchinson, Deformation of Polycrystals (edited by N. Hansen et al.), pp. 335-342. Riso Natl. Lab., Roskilde, Denmark (1981).
87. J. Baumgarten, Proc. 3rd Intnl. Al. Extrusion Tech. Sem. Alum Assoc. Wash., 2, 40-44 (1984).
88. W. G. Barry, Proc. 3rd Intnl. Al. Extrusion Tech. Sem. Alum. Assoc. Wash., 2, 715 (1984).
89. H. J. McQueen, Trans. Japan Inst. Met., 9, 170-177 (1968).
90. C. M. Sellars, A. M. Irisarri and E. S. Puchi, Microstructural Control of Al Alloys (edited by E. H. Chia and H. J. McQueen), pp. 179-196. Met. Soc. AIME, Warrendale, PA (1987).
91. R. W. Evans and G. R. Dunstan, J. Inst. Metals, 99, 4-14 (1971).
92. H. J. McQueen, G. Avramovic-Cingara, K. Conrod and I. Szkrumelak, Microstruct. Sci., 17, 375-392 (1989).
93. J. M. Belling, H. J. McQueen, B. Crawford and A. S. Malin, Recrystallization '90 (edited by T. Chandra), pp. 655-660. TMSAIME, Warrendale, PA (1990).
94. T. Sheppard and D. Raybould, J. Inst. Met., 101, 73-78 (1973).
95. S. Kikuchi and M. Sukimoto, Proc. 4th Intnl. Al. Extrusion Tech. Seminar (edited by I. Werner), pp. 343-355. Aluminum Association, Washington (1988).
96. G. Scharf. Intnl. Al. Extrusion Tech. Seminar, Aluminum Association, Washington, Paper No. 9, pp. 1-18.
97. T. Sheppard, Proc. 2nd Intl. Al. Extrusion Tech. Sem. Alum Assoc., Wash., 1, 331-337 (1977).
98. T. Sheppard and D. S. Wright, Met. Tech., 1, 215-223 (1989).
99. H. J. McQueen and P. Sakaris, Aluminum Alloys, Their Physical and Mechanical Properties (ICAA 3) (edited by L. Arnberg et al.), Vol. 2, pp. 179-184. NTH and SINTEFF Trondheim, Norway (1992).
100. R. Akeret, Z. Metallkd., 61, 3-10 (1970).
101. W. A. Wong and J. J. Jonas, Trans. Met. Soc., AIME, 242, 2271-2280 (1968).
102. E. C. W. Perryman, Trans AIME, 203, 369-378 (1955).
103. N. Ryum and J. D. Embury, Recovery and Recrystallization of Metals (edited by L. Himmel), pp. 211-240. Interscience Publishers, John Wiley, New York (1963).
104. R. A. Ayres, Met. Trans., 10A, 849-854 (1979).
105. M. E. Kassner, C. A. Henshall and H. J. McQueen, Hot Deformation of Al Alloys (edited by T. G. Langdon et al.), pp. 261-275. Met. Soc. AIME, Warrendale, PA (1991).
106. R. C. Gifkin, Fracture (edited by B. L. Averbach et al.), pp. 579-627. Tech. Press and Wiley, New York, NY (1959).
107. M. F. Ashby, C. Ghandi, D. M. R. Taplin, Acta. Met., 27, 699-729 (1979).
108. M. P. Clode and T. Sheppard, Aluminum Technology 1986 (edited by T. Sheppard), pp. 293-296. Inst. Metals, London (1986).
109. H. J. McQueen, Defects, Fracture and Fatigue (edited by G. Sih and W. Provan), pp. 459-471. Martinus Nihoff Publishers, The Hague (1983).
110. J. R. Pickens, W. Precht and J. J. Mills, Hot rolling Simulation by Torsion of EMC and DC 5182, Martin Marietta Labs, Baltimore, MD., 21227, 459-471 (1984).
111. W. Precht and J. R. Pickens, Met. Trans., 18A, 1603-1611 (1987).
112. M. Uekie, S. Horie and T. Nakamura, J. Mech. Working Tech., 11, 365-376 (1985).
113. L. Ivanchev and D. Chavdarova, Proc. Intl. Symp. Plasticity and Resistance to Metal Deformation (edited by S. Blecic et al.), pp. 348-361. Fac. Metallurgy, Titograd (1986).
114. A. I. Kemppinen, Deformation Under Hot Working Conditions, pp. 117-121. Iron Steel Inst., London (1968).
115. M. Sotsuka and R. Horiuchi, Creep and Fracture of Engineering Materials (edited by B. Wilshire and D. Owens), pp. 157-168. Pineridge Press, Swansea, U.K. (1984).