La résistance au gel des bétons à haute performance

Canadian Journal of Civil Engineering

Volumn 23, Issue 5, 1996, Pages 1070-1080

  Marchand, J ^a   Gagne R ^b   Jacobsen, S ^c   Pigeon, M ^a   Sellevold, E J ^d  

^a UNIVERSITÉ LAVAL   (Canada)

^b UNIVERSITÉ DE SHERBROOKE   (Canada)

^c Inst Norvegien de Rech sur le Bat   (Norway)

^d Inst Norvégien de Technol   (Norway)

Author keywords

Frost resistance; High performance concrete; Ice formation; Internal microcracking; Scaling

Indexed keywords

BINDERS; CRACK INITIATION; DETERIORATION; FROST RESISTANCE; ICE; PERFORMANCE; POROSITY; STRENGTH OF MATERIALS; WATER;

HIGH PERFORMANCE CONCRETE; SCALING; WATER BINDER RATIO;

CONCRETES;

CONCRETE; FROST RESISTANCE; MICROCRACKING;

EID: 0030259214     PISSN: 03151468     EISSN: None     Source Type: Journal    
DOI: 10.1139/l96-914     Document Type: Article

References (62)

1. ASTM. 1992a. Standard test method for resistance of concrete to rapid freezing and thawing. ASTM Standard C 666. Annual Book of ASTM Standards. Vol. 04.02. pp. 322-327.
2. ASTM. 1992b. Standard test method for scaling resistance of concrete surfaces exposed to deicing chemicals. ASTM Standard C 672. Annual Book of ASTM Standards. Vol. 04.02. pp. 341-343.
3. Bager, D.H., et Sellevold, E.J. 1980. Ice formation in hardened cement paste. Part II. Steam-cured pastes with variable moisture contents. Dans Durability of building materials and components. Éditeurs : P.J. Sereda et G.G. Litvan. ASTM Special Technical Publication STP-691. pp. 439-454.
4. Bager, D.H., et Sellevold, E.J. 1986a. Ice formation in hardened cement paste. Part I. Room temperature cured paste with variable moisture contents. Cement and Concrete Research, 16 : 709-720.
5. Bager, D.H., et Sellevold, E.J. 1986b. Ice formation in hardened cement paste. Part II. Drying and resaturation of room temperature cured paste. Cement and Concrete Research, 16 : 835-844.
6. Baroghel-Bouny, V. 1994. Caractérisation des pâtes de ciment et des bétons. Méthodes, analyse, interprétations. Thèse de doctorat, École nationale des ponts et chaussées, Paris.
7. Beddoe, R.E., et Setzer, M. J. 1990. Phase transformations of water in hardened cement paste. A low temperature DSC investigation. Cement and Concrete Research, 20 : 236-242.
8. Bilodeau, A., et Carette, G.G. 1989. Resistance of condensed silica fume concrete to the combined action of freezing and thawing cycling and deicing salts. Éditeur : V.M. Malhotra. American Concrete Institute Special Publication SP-114. pp. 945-969.
9. Bordeleau, D., Pigeon, M., et Banthia, N. 1992. Comparative study of latex-modified concretes and normal concretes subjected to freezing and thawing in presence of deicer salt solution. American Concrete Institute Materials Journal, 89 : 547-553.
10. Buil, M., et Aguirre-Puente, J. 1981. Thermodynamic and experimental study of the crystal growth of ice. Proceedings of the American Society of Mechanical Engineers, Winter Annual Meeting.
11. Carette, G., et Malhotra, V.M. 1983. Mechanical properties, durability, and drying shrinkage of Portland cement concrete incorporating silica fume. Cement, Concrete, and Aggregates, 5:3-13.
12. Cohen, M.D., Zhou, Y., et Dolch, W.L. 1992. Non-air-entrained high-strength concrete. Is it frost resistant? American Concrete Institute Materials Journal, 89 : 406-415.
13. Defay, R., Prigogine, I., Bellemans, A., et Everett, D.H. 1966. Surface tension and adsorption. Longmans, London, pp. 243-255.
14. De Larrard, F. 1989. Ultra fine particles for the making of very high strength concretes. Cement and Concrete Research, 19 : 161-172.
15. Fagerlund, G. 1973. Determination of pore size distribution from freezing-point depression. Matériaux et construction (Paris), 6 : 215-225.
16. Fagerlund, G. 1986. Effect of air-entraining and other admixtures on the salt-scaling resistance of concrete. Séminaire international Some Aspects of Admixtures and Industrial By-Products on the Durability of Concrete, Göteburg.
17. Fagerlund, G. 1993. Frost resistance of high performance concrete. Some theoretical considerations. Division of Building Materials, Lund Institute of Technology, Lund, rapport TVBM-3056.
18. Feldman, R.F. 1970. Length change - adsorption relations for the water-porous glass system to -4O°C. Revue canadienne de chimie, 42 : 287-297.
19. Foy, C., Pigeon, M., et Banthia, N. 1988. Freeze-thaw durability and deicer salt scaling resistance of a 0.25 water-cement ratio concrete. Cement and Concrete Research, 18 : 604-614.
20. Gagné, R., et Marchand, J. 1993. The deicing salt scaling resistance of high-performance concretes: An overview. Atelier international sur la résistance à l'écaillage du béton dû au gel-dégel en présence de sels fondants, Université Laval, Québec, 30 et 31 août 1993. pp. 21-48.
21. Hammer, T.A., et Sellevold, E.J. 1990. Frost resistance of high strength concrete. Éditeur : W. Hester. American Concrete Institute Special Publication SP-121. pp. 457-489.
22. Hooton, R.D., et McGrath, P. 1991. Influence of self-desiccation of non-air entrained silica fume mortars on resistance to freezing and thawing. Éditeur : S. Mindess. American Ceramic Society Transactions, 16 : 489-500.
23. Jacobsen, S. 1995. Scaling and cracking in unsealed freeze/thaw testing of portland cement and silica fume concretes. Thèse de doctorat, Département de génie civil, Universitetet I Trondheim, Trondheim.
24. Jacobsen, S., et Sellevold, E.J. 1993. Frost/salt scaling and ice formation of concrete: effect of curing temperature and silica fume on normal and high strength concrete. Atelier international sur la résistance à l'écaillage du béton dû au gel-dégel en présence de sels fondants, Université Laval, Québec, 30 et 31 août 1993. pp. 229-246.
25. Jacobsen, S., et Sellevold, E.J. 1995. ASTM C 666 (Procedure A) testing of high strength concrete: effect of internal cracking on porosity measured by mercury intrusion porosimetry. Proceedings of the Consec 1995 Conference, Sapporo, août 1995.
26. Justnes, H., Sellevold, E.J., et Lundevall, G. 1992. High strength concrete binders. Part A. Reactivity and composition of cement pastes with and without condensed silica fume. Editeur : V.M. Malhotra. American Concrete Institute SP-132. pp. 873-889.
27. Khalil, S.M., Ward, M.A., et Morgan, D.R. 1980. Freeze-thaw durability of non air-entrained high strength concrete containing superplasticizers. Dans Durability of building materials and components. Éditeurs : P.S. Sereda et G.G. Litvan. ASTM Special Technical Publication STP-691. pp. 509-519.
28. Kobayashi, M., Nakakuro, K., Kodama, S., et Negami, S. 1981. Frost resistance of superplasticized concrete. American Concrete Institute SP-68. pp. 269-282.
29. Kukko, H. 1992. Frost effects on the microstructure of high strength concrete, and methods for their analysis. Technical Research Center of Finland, Espoo, VTT Publications n° 126.
30. Langlois, M., Beaupré, D., Pigeon, M., et Foy, C. 1989. The influence of curing on the salt scaling resistance of concrete with and without silica fume. Editeur : V.M. Malhotra. American Concrete Institute Special Publication SP-114. pp. 971-990.
31. Le Sage de Fontenay, C., et Sellevold, E.J. 1980. Ice formation in hardened cement paste. Part I. Mature water-saturated systems. Dans Durability of building materials and components. Éditeurs : P.J. Sereda et G.G. Litvan. ASTM Special Technical Publication STP-691. pp. 425-438.
32. Lindmark, S. 1993. Effect of variations in salt concentration, salt distribution and freeze-thaw cycle at a salt scaling test according to the SS 13 72 44 test method. [En suédois.] Institut technique de Lund, Lund, rapport TVBM-7055.
33. Litvan, G.G. 1972. Phase transitions of adsorbates. IV. Mechanism of frost action in hardened cement paste. Journal of the American Ceramic Society, 55 : 38-42.
34. Malhotra, V.M. 1982. Mechanical properties and freezing and thawing resistance of non-air-entrained, air-entrained, and air-entrained superplasticized concrete using ASTM test C 666, procedures A and B. Cement, Concrete, and Aggregates, 4 : 3-23.
35. Malhotra, V.M., Painter, K.A., et Bilodeau, A. 1987. Mechanical properties and freezing and thawing resistance of high-strength concrete incorporating silica fume. Cement, Concrete, and Aggregates, 9 : 65-79.
36. Marchand, J. 1993. Contribution à l'étude de la détérioration par écaillage du béton en présence de sels fondants. Thèse de doctorat, École nationale des ponts et chaussées, Paris.
37. Marchand, J., Sellevold, E.J., et Pigeon, M. 1994. The deicer salt scaling deterioration of concrete. An overview. Éditeur : V.M. Malhotra. American Concrete Institute Special Publication SP-145. pp. 1-46.
38. Moranville-Regourd, M. 1992. La microstructure des BHP. Les bétons à hautes performances. Caractérisation, durabilité, applications. Éditeur : Y. Malier. Presses de l'École nationale des ponts et chaussées, Paris, pp. 25-44.
39. Mtsui, K., Kasami, H., Yoshioka, Y., et Kinoshita, M. 1989. Properties of high-strength concrete with silica fume using high-range water reducer of slump retarding type. Editeur : V.M. Malhotra. American Concrete Institute SP-119. pp. 79-98.
40. Norling-Mjörnell, K. 1994. Self-desiccation in concrete. Chalmers University of Technology, Göteborg, publication P-94:2.
41. Okada, E., Hisaka, M., Kazama, Y., et Hattori, K. 1981. Freeze-thaw resistance of superplasticized concrete. American Concrete Institute SP-68. pp. 215-231.
42. Petersson, P.E. 1986. The influence of silica fume on the salt frost resistance of concrete. Division of Building Technology, Swedish National Testing Institute Technical Report SP-RAPP 1986.
43. Pigeon, M. 1989. La durabilité au gel du béton. Matériaux et construction (Paris), 22 : 3-14.
44. Pigeon, M., Gagné, R., et Foy, C. 1987. Critical air-void spacing factor for low water-cement ration concretes with and without condensed silica fume. Cement and Concrete Research, 17 : 896-906.
45. Pigeon, M., Gagné, R., et AïtcinP.-C. 1991. Freezing and thawing tests of high-strength concretes. Cement and Concrete Research, 21 : 844-852.
46. Powers, T.C. 1949. The air requirement of frost resistant concrete. Highway Research Board, Proceedings of the Annual Meeting, 29 : 184-211.
47. Powers, T.C. 1954. Void spacing as a basis for producing air-entrained concrete. Journal of the American Concrete Institute, 50 : 741-760.
48. Powers, T.C., et Brownyard, T.L. 1946. Studies of the physical properties of hardened portland cement paste. Part 8. The freezing of water in hardened portland cement paste. Journal of the American Concrete Institute, 18 : 934-969.
49. Powers, T.C., et Helmuth, R. A. 1953. Theory of volume changes in hardened cement paste during freezing. Highway Research Board, Proceedings of the Annual Meeting, 32 : 285-297.
50. Radjy, F. 1975. Thermodynamic parameters for sorption of water by hardened cement. 77th Annual Meeting of the American Ceramic Society, Cements Division, Washington, étude no 6.
51. Regourd, M. 1985. Microstructure of high strength cement paste systems. Dans Very high strength cement-based materials. Editeur : J.F. Young. Materials Research Society Symposium Proceedings, 42 : 3-18.
52. Rickne, S., et Nyqvist, H. 1989. Salt frost resistant concrete exposed to deicing salts. 9th European Ready Mixed Concrete Organiza-tion Congress, ERMCO 1989, Stavenger, juin 1989. pp. 56-91.
53. Sarkar, S., Kassab, E., et Aïtcin, P.C. 1988. La microstructure des bétons à hautes performances. Les bétons à hautes performances. Département de génie civil, Université de Sherbrooke, Sherbrooke.
54. Scrivener, K.L., Bentur, A., et Pratt, P.L. 1988. Quantitative characterization of the transition zone in high-strength concretes. Advances in Cement Research, 1 : 230-239.
55. Sellevold, E.J., et Bager, D.H. 1985. Some implications of calorimetric ice formation results for frost resistance testing of cement products. The Technical University of Denmark, Technical Report 86/80.
56. Sellevold, E.J., et Farstad, T. 1991. Frost/salt testing of concrete: effect of test parameters and concrete moisture history. Nordic Concrete Research, 10 : 121-138.
57. Sellevold, E.J., et Justnes, H. 1992. High strength concrete binders. Part B. Nonevaporable water, self-desiccation and porosity of cement pastes with and without condensed silica fume. Éditeur : V.M. Malhotra. American Concrete Institute Special Publication SP-132. pp. 891-902.
58. Sellevold, E.J., et Radjy, F. 1976. Low dynamic mechanical response of porous Vycor glass as a function of moisture content. Part 1. The capillary transition. Journal of Materials Science, 11 : 1927-1938.
59. Sellevold, E.J., Jacobsen, S., et Bakke, J.A. 1993. High-strength concrete without air entrainment: Effect of rapid temperature cycling above and below 0°C. Atelier international sur la résistance à l'écaillage du béton dû au gel-dégel en présence de sels fondants, Université Laval, Québec, 30 et 31 août 1993. pp. 153-164.
60. SIS. 1992. Concrete testing - Hardened concrete - Frost resistance. Standardiserings-kommissionen i Sverige, Swedish Standard SS 13 72 44.
61. Villadsen, J. 1989. The influence of curing temperature on pore structure of hardened cement paste. [En danois.] Lab. for Bygn. Mat., Danmarks Tekn. Højskole, Technical Report 218/90.
62. Vuorinen, J. 1970. On use of the dilation factor and degree of saturation in testing concrete for frost resistance. Nordisk Belong, 1 : 37-64.