Review of knee models: 1996 update

Applied Mechanics Reviews

Volumn 49, Issue 10, 1996, Pages S187-S193

  Hefzy, Mohamed Samir ^a   Cooke, T Derek V ^a  

^a KING FAISAL SPECIALIST HOSPITAL AND RESEARCH CENTER   (Saudi Arabia)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMECHANICS; BONE; DIFFERENTIAL EQUATIONS; DYNAMIC LOADS; LIGAMENTS; MATHEMATICAL MODELS;

KNEE MODELS; PATELLO FEMORAL JOINTS; TIBIO FEMORAL JOINTS;

JOINTS (ANATOMY);

EID: 0030258041     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3101971     Document Type: Article

References (64)

1. Abdel-Rahman E (1991), Two-dimensional dynamic model of the human knee joint, Master Thesis, Dept of Mech Eng, Univ of Toledo, Toledo, OH.
2. Abdel-Rahman E and Hefzy MS (1993), Two-dimensional dynamic anatomical model of the human knee joint, JBiomech Eng, 115(4) 357-365.
3. Abdel-Rahman E and Hefzy MS (1993), “Three-Dimensional Dynamic Modeling of the Tibio-Femoral Joint”, 1993 Advances in Bioengineering, ASME BED Vol 26, 315-318.
4. Abdel-Rahman E, Afjeh A, and Hefzy MS (1994), “Improved Solution Algorithm for the Determination of the 3-D Dynamic response of the Tibio-Femoral Joint” in, Biomedical Engineering Recent Developments, Proc of 13th Southern Biomed Eng Conf, Washington DC, 368-371.
5. Abdel Rahman E, Hefzy MS, and Afjeh A (1994), “Determination of the Three-Dimensional Dynamic Response of the Tibio-Femoral Joint Using a DAE Solver,” 1994 Advances in Bioengineering, ASME BED Vol 28, 421-422.
6. Abdel-Rahman EM (1995), Three-Dimensional Dynamic Anatomically Based Model of the Human Tibio-Femoral Joint, PhD Dissertation, Dept of Mech Eng, Univ of Toledo, Toledo, OH.
7. Ahmed AM and Burke DC (1983), In-Vitro measurement of static pressure distribution in synovial joints - Part I: Tibial surface of the knee”, J Biomech Eng, 105, 216-225.
8. Ahmed AM, Burke DC, and Yu A (1983), In-Vitro measurement of static pressure distribution in synovial joints - Part II: Retropatellar surface, J Biomech Eng, 105, 226-236.
9. Aspden RM (1985), Model for the function and failure of the meniscus, EngMed, 199, 119-122.
10. Ateshian GA, Soslowsky LJ, and Mow VC (1991), Quantitation of articular surface topogrophy and cartilage thickness in knee joints using streophotogrammetry, J Biomech, 24, 761-776.
11. Ateshian GA (1993), B-spline ieast-Squares surface-fitting for articular surfaces of diathroidal joints, J Biomech Eng, 115, (4), 366-373.
12. Ateshian GA, Kwak SD, Soslowsky LJ, and Mow VC (1994), Stereophotogrammetric method for determining in situ contact areas in diarthrodial joints, and a comparison with other methods, J Biomech, 27(1), 111-124.
13. Bendjaballah MZ, Shirazi-Adl A, and Zukor DJ (1995), Biomechanics of the human knee joint in compression: Reconstruction, mesh generation and finite element analysis, The Knee, 2(2), 69-79.
14. Bendjaballah MZ and Shirazi-Adl A (1995), “Menisci and Stability of Human Knee in Extension: A Finite Element Model Study”, BED-Vol 31, 1995 Advances in Bioengineering, 313-314.
15. Blankevoort L, Kuiper JH, Huiskes R, and Grootenboer HJ (1991), Articular contact in a three-dimensional model of the knee, J Biomech, 24(11), 1019-1031.
16. Blankevoort L and Huiskes R (1991), Ligament-bone interaction in a three-dimensional model of the knee, J Biomech Eng, 113, (3), 263-269.
17. Brenan KE, Campbell SL, and Petzold LR (1989), Numerical Solution of Initial-Value Problems in Differential-Algebraic Equations, North-Holland, Elsevier Sci.
18. Coons SA (1967), Surface of Computer-Aided Design of Space Forms, MIT Project MAC-TR-41.
19. Dortmans L, Jans H, Sauren A, and Huson A (1991), NonLinear dynamic behavior of the human knee joint - Part I: Postmortem frequency domain analyses, J Biomech Eng, 113, 387-391.
20. Dortmans L, Jans H, Sauren A, and Huson A (1991), NonLinear dynamic behavior of the human knee joint - Part II: Time-domain analyses: Effects of structural damage in postmortem experiments. J Biomech Eng, 113, 392-396.
21. Engin AE and Turner ST (1993), Improved dynamic model of the human knee joint and its response to impact loading on the lower leg, J Biomech Eng, 115(2), 137-143.
22. Essinger JR, Leyvraz PF, Heegard JH, Robertson DD (1989), Mathematical model for the evaluation of the behaviour during flexion of condylar-type knee prostheses, JBiomech, 22,1229-1241.
23. Fairbank T (1948), J, Knee changes after menisectomy, J Bone Joint Surgey, 30B, 666-670.
24. Fithian DC, Kelly MA, and Mow VC (1990), Material properties and structure-function relationships in the menisci, Clinical Orthopaedic Rel Res, 252, 19-31.
25. Fujikawa K, Seedhom BB, Wright V (1983), Biomechanics of the patel-lo-femoral joint - Part I: A study of the contact area and the congruity of the patello-femoral compartment and movement of the patella, J Eng Med, 12, 3-11.
26. Fulkerson JP (1982), Awareness of the retinaculum in evaluating patello-femoral pain, Am J Sports Med, 10, 147-149.
27. Gill HS and O’Connor JJ (1996), Biarticulating two-dimensional computer model ofthe human patello-femoral joint, Clinical Biomech, 11(2), 81-89.
28. Heegaard J, Leyvraz PF, Cumier A, Rakotomanana L, and Huiskes R (1995), Biomechchanics of the human patella during passive knee klex-ion, J Biomech, 28(11), 1265-1279.
29. Hefzy MS, Grood ES, and Zoghi M (1987), “Axisymmetric finite element model of the meniscus,” ASME Advances in Bioengineering, New York, 51-52.
30. Hefzy MS and Grood ES (1988), Review of Knee Models, Appl Mech Rev, 41(1), 1-13.
31. Hefzy MS, Jackson WT, Saddemi SR, and Hsieh YF (1992), Effects of tibial rotations on patellar tracking and patello-femoral contact area, J of Biomed Eng, 14, 329-343.
32. Hefzy MS and Yang H (1993), Three-dimensional anatomical model of the human patello-femoral joint to determine patello-femoral motions and contact characteristics, J Biomed Eng, 15, 289-302.
33. Hehne HJ (1990), Biomechanics of the patello-femoral joint and its clinical relevance, Clinical Orthopaedic Rel Res, 258, 73-85.
34. Henche HR, Kunzi HU, and Morscher E (1981), Areas of contact pressure in the patello-femoral joint, Int Orthopaedics, 4, 279-281.
35. Hindmarsh AC (1983), “ODEPACK, a Systematized Collection of ODE Solvers”, in, Scientific Computing: Vol 1, IMACS Transactions on Scientific Computation, Stepleman RS, Carver M, Peskin R, Ames, and Vichnevetsky (Eds), North-Holland Publ, Amsterdam-NY, 55-64.
36. Hirokawa S (1991), Three-dimensional mathematical model analysis of the patello-femoral joint, JBiomech, 24, 659-671, 1991.
37. Huberti HH and Hayes WC (1988), Contact pressures in chondromalacia patellae and the effects of capsular reconstructive procedures, J Orthopaedic Res, 6, 499-507.
38. Huiskes R and Blankervoort L (1990), “Relationship Between Knee Joint Motion and Articular Surface Geometry,” in: Biomechanics of Diarthrodial Joints, Springer-Verlag, NY, II, 269-286.
39. Jans HWJ, Dortmans LJMG, Sauren AAHJ, and Huson A (1988), Experimental approach to evaluate the dynamic behavior of the human knee, J Biomech Eng, 110, 69-73.
40. Matthews LS, Sonstegard DA, and Henke JA (1977), Load bearing characteristics of the patello-femoral joint, Acta Orthopaedic Scand, 48, 511-516.
41. Moeinzadeh MH, Engin AE, and Akkas N (1983), Two-dimensional dynamic modeling of human knee joint, J of Biomech, 16(4), 253-264.
42. Moeinzadeh MH and Engin AE (1988), “Dynamic Modeling of the Human Knee Joint. In: Computational Methods,” in Bioengineering, Proc of1988 WAMASME, Chicago IL, Nov 27-Dec 2, BED-Vol 9, 145-156.
43. Mow VC, Ateshian GA, and Spilker RL (1993), Biomechanics of diarthrodial joints: A review of twenty years of progress, J Biomech Eng, 115, 460-467.
44. Newton PM and Mow VC (1992), Effects of strain rate on the tensile properties of bovine meniscus, Trans Orthopaedic Res Soc, 17, 626.
45. Petzold LR (1982), Differential/Algebraic Equations are not ODE's, Siam JSei Slat Comput, 3(3), 367-384.
46. Petzold LR (1983), “A Description of DASSL: A Differential/Algebraic System Solver,” in: Scientific Computing: Vol 1, IMACS Transactions on Scientific Computation, Stepleman RS, Carver M, Peskin R, Ames and Vichnevetsky (Eds), North-Holland Publ, Amsterdam-NYOxford, 65-68.
47. Reider B, Marshall JL, and Ring B (1981), Patellar tracking, Clinical Orthopaedic Res, 157, 143-148.
48. Reithmeier E and Plitz W (1990), Theoretical and numerical approach to optimal positioning of the patellar surface replacement in a total knee endoprosthesis, JBiomech, 23, 883-892.
49. Sauren AAHJ, Huson A, and Schouten RY (1984), Axisymmetric finite element analysis of the mechanical function of the meniscus”, Int J Sports Med, 5, 93-95.
50. Schreppers GJMA, Sauren AAHJ, and Huson A (1990), Numerical model of the load transmission in the yibio-femoral contact area, J Eng Med, 204, 53-59.
51. Shoemaker SC and Markolf KL (1986), Role of the meniscus in the anterior-posterior stability of the loaded anterior cruciate-deficient knee, effects of partial versus total menisectomy, J Bone Jt Surgery, 68A, 7179.
52. Skaggs DL and Mow VC (1990), Function of the radial tie fibers in the meniscus, Trans Orthopaedic Res Soc, 15, 248.
53. Soslowsky LJ, Flatow EL, Bigliani LU, Pawluk RJ, Ateshian GA, and Mow VC (1992), Quantification of in situ contact areas at the glenohumeral joint: A biomechanical study, J Orthopaedic Res, 10, 524-534.
54. Spilker RL, Donzelli PS, and Mow VC (1992), Transversely isotropic biphasic finite element model of the meniscus, J Biomech, 25, 1027-1045.
55. Tissakht M and Ahmed AM (1990), Effect of tibial axial rotation on knee meniscal stress: A finite element study, Trans Orthopaedic Res Soc, 15, 243.
56. Tissakht M, Marchand F, and Ahmed AM (1991), Nonlinear finite element analysis of the knee menisci: A composite-reinforced model, Trans Orthopaedic Res Soc, 16, 294.
57. Tissakht M and Ahmed AM (1995), Tensile stress-strain characteristics of the human meniscal material, J Biomech, 28(4), 411-422.
58. Turner ST and Engin AE (1993), Three-body segment dynamic model of the human knee, J Biomech Eng, 115(4), 350-356.
59. Van Kampen A and Huiskes R (1990), Three-dimensional tracking pattern of the human patella, J Orthopaedic Res, 8, 372-382.
60. Van Eijden TMGJ, Kouwenhoven E, Verburg J, and Weijs WA (1986), Mathematical model of the patello-femoral joint, J Biomech, 19, 219-229.
61. Walker PS and Garg A (1991), Range of motion in total knee arthroplasty: A computer analysis, Clinical Orthopaedic and Rel Res, 262, 227-235.
62. Yamaguchi GT and Zajac FE (1989), Planar model of the knee joint to characterize the knee extensor mechanism, J Biomech, 22, 1-10.
63. Yang H and Hefzy MS (1994), Effects of Advancing the Tibial Tuberosity and Changing the Q-Angle on Patello-Femoral Motions and Contact Forces, Trans of Orthopaedic Res Soc, New Orleans.
64. Zoghi M, Hefzy MS, Jackson WT, and Fu KC (1992), Three-Dimensional Morphometrical Study of the Distal Human Femur, J Eng Med, Issue #3,206, 147-151.