Recent studies on the dynamic plastic behavior of structures - An update

Applied Mechanics Reviews

Volumn 49, Issue 10, 1996, Pages S112-S117

  Jones, Norman ^a  

^a UNIVERSITY OF LIVERPOOL   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; DUCTILITY; DYNAMIC LOADS; DYNAMIC RESPONSE; ELASTICITY; MATHEMATICAL MODELS; PLASTICITY; STRAIN; STRUCTURAL MEMBERS;

DYNAMIC PLASTIC RESPONSE; FINITE DISPLACEMENTS; INELASTIC STRAINS;

STRUCTURAL ANALYSIS;

EID: 0030257925     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3101962     Document Type: Article

References (127)

1. Jones N (1989), Recent studies on the dynamic plastic behavior of structures, Appl Mech Rev, 42(4), 95-115.
2. Stronge WJ and Yu TX (1993), Dynamic Models for Structural Plasticity, Springer-Verlag, London.
3. Bangash MYH (1993), Impact and Explosion: Analysis and Design, Blackwell, Oxford.
4. Brebbia CA and Sanchez-Galvez V (Eds) (1994), Shock and Impact on Structures, Comput Mech Publ, Southampton.
5. Bulson PS (ed) (1989), Structures Under Shock and Impact, Elsevier and Comput Mech Publ.
6. Bulson PS (ed) (1992), Structures Under Shock and Impact, II, Comp Mech Publ and Thomas Telford.
7. Maekawa I (ed) (1992), Proc of the Int Symp on Impact Engineering, Sendai, Vols I and 2, Foundation for Advancement of Int Sci, Japan.
8. Gupta NK (ed) (1993), Plasticity and Impact Mechanics, Wiley Eastern, New Delhi.
9. Jones N and Wierzbicki T (Eds) (1993), Structural Crashworthiness and Failure, Elsevier Appl Sci, London.
10. Zheng Z (ed) (1994), Proc of IUTAM Symp on Impact Dyn, Peking Univ Press.
11. Bulson PS (ed) (1994), Structures Under Shock and Impact, III, Comput Mech Publ, Southampton.
12. Int Crashworthiness and Design Symp Proc, Univ de Valenciennes, France, (1995).
13. Batra RC, Mai AK, and MacSithigh GP (eds) (1995), Impact, Waves and Fracture, ASME AMD Vol 205.
14. Tanimura S and Khan AS (eds) (1995), Dynamic Plasticity and Structural Behaviors, Plasticity '95, Gordon and Breach.
15. Stronge WJ and Hua Y (1990), Elastic effects on deformation of impulsively loaded elastoplastic beams, Int J Impact Eng, 9(3), 253-262.
16. Wang XD and Yu TX (1991), Parkes revisited: Effect of elastic deformation at the root of a cantilever beam, Int J Impact Eng, 11(2), 197-209.
17. Yu TX (1993), “Elastic effects in the dynamic plastic response of structures,” in Structural Crashworthiness and Failure, Jones N and Wierzbicki T (eds), Elsevier Appl Sci, 341-384.
18. Nurick GN and Martin JB (1989), Deformation of thin plates subjected to impulsive loading - A review: Part I: Theoretical consideration, Int J Impact Eng, 8(2), 159-170.
19. Nurick GN and Martin JB (1989), Deformation of thin plates subjected to impulsive loading - A review. Part II: Experimental studies, Int J Impact Eng, 8(2), 171-186.
20. Nurick GN (1989), “Empirical solution for predicting maximum central deflections of impulsively loaded plates,” Int Conf Mechanical Properties of Materials at High Rates of Strain, Harding J (Ed), Inst of Phys Conf Series No 102, 457-464.
21. Yu TX and Chen FL (1992), Large deflection dynamic plastic response of rectangular plates, Int J Impact Eng, 12(4), 603-616.
22. Caridis PA., Samuelides E, and Frieze PA (1994), Dynamic response of ship plating under lateral impact, Int J Impact Eng, 15(2), 149-164.
23. Zhu L and Faulkner D (1994), Dynamic inelastic behaviour of plates in minor ship collisions, Int J Impact Eng, 15(2), 165-178.
24. Shen WQ (1995), Dynamic plastic response of thin circular plates struck transversely by nonblunt masses, Int J Solids Struct, 32(14), 2009-2021.
25. Manoach E (1994), Dynamic large deflection analysis of elastic-plastic Mindlin circular plates, Int J Nonlinear Mech, 29(5), 723-735.
26. Chen W (1995), Bound solutions for permanent deformation of plates impacted by dropped objects, J Construct Steel Res, 33(3), 179-198.
27. Zhu L (1996), Transient deformation modes of square plates subjected to explosive loadings, Int J Solids Struct, 33(3), 301-314.
28. Zhao Y, Yu TX, and Fang J (1994), “Dynamic plastic response of structures with finite-deflections and saturation impulse,” in Proc of IUTAM Symp on Impact Dyn, Peking Univ, Zheng Z (ed), 105-110.
29. Zhou Q, Yu TX, and Huang Z (1990), Large deflection of a rigid-per-fectly plastic portal frame subjected to impulsive loading, Int J Solids and Struct, 26(11), 1225-1242.
30. Jones N (1989), “Comments on the modelling of material properties for dynamic structural plasticity,” Int Conf on Mechanical Properties ofMaterials at High Rates of Strain, Harding J (Ed), Inst of Phys Conf Series No 102, Bristol, 435-445.
31. Klepaczko JR (1995), “Rate sensitivities of construction steels and aluminium alloys,” in Proc Int Crashworthiness and Design Symp, Univ de Valenciennes, France, paper A3.
32. Tanimura S and Mimura J (1995), “Practical constitutive models covering wide ranges of strain rates, temperature and large deformation,” in Dynamic Plasticity and Structural Behaviors, Plasticity ‘95, Tanimura S and Khan AS (Eds), Gordon and Breach, 28-31.
33. Zhu L, Faulkner D, and Atkins AG (1994), Impact of rectangular plates made from strain-rate sensitive materials, Int J Impact Eng, 15(3), 243-255.
34. Li QM and Jones N (1995), Blast loading of fully clamped beams with transverse shear effects, Mech, Struct, and Machines, 23(1), 59-86.
35. Manoach E and Karagiozova D (1993), Dynamic response of thick elastic-plastic beams, Int J Mech Sci, 35(11), 909-919.
36. Li QM and Jones N (1994), Blast Loading of Fully Clamped Circular Plates with Transverse Shear Effects, Int J Solids and Struct, 31(14), 1861-1876.
37. Li QM and Huang YG (1989), Dynamic plastic response of thin circular plates with transverse shear and rotatory inertia subjected to rectangular pulse loading, Int J Impact Eng, 8(3), 219-228.
38. Li QM and Jones N (1995), Blast Loading of a “Short” Cylindrical Shell with Transverse Shear Effects, Int J Impact Eng, 16(2), 331-353.
39. Youngdahl CK (1991), Modal approximation method for strain-hardening beams, Int J Impact Eng, 11(1), 61-75.
40. Youngdahl CK (1992), Optimum approximate modes of strain-hardening beams, Int J Impact Eng, 12(2), 227-240.
41. Youngdahl CK (1994), Approximation method for the dynamic response of strain-hardening clamped beams, Int J Impact Eng, 15(2), 101-118.
42. Stronge WJ and Yu TX (1989), Dynamic plastic deformation in strain-hardening and strain-softening cantilevers, Int J Solids Struct, 25(7), 769-782.
43. Lu G and Wang B (1995), Simple method for first dynamic mode of plastic deformation for suddenly loaded beams, Int J Impact Eng, 16(5/6), 833-840.
44. Shen WQ and Jones N (1992), Pseudo-shakedown of beams and plates when subjected to repeated dynamic loads, Trans ASME, J Appl Mech, 59(1), 168-175.
45. Karagiozova D and Jones N (1992), Dynamic buckling of a simple elastic-plastic model under pulse loading, Int J Non-Linear Mech, 27(6), 981-1005.
46. Karagiozova D and Jones N (1992), Dynamic pulse buckling of a simple elastic-plastic model including axial inertia, Int J Solids Struct, 29(10), 1255-1272.
47. Zhang TG and Yu TX (1989), Note on a ‘velocity sensitive’ energy absorbing structure, Int J Impact Eng, 8(1), 43-51.
48. Calladine CR (1983), “Investigation of impact scaling theory,” in Structural Crashworthiness, Jones N and Wierzbicki T (eds), Butterworths, 169-174.
49. Calladine CR and English RW (1984), Strain-rate and inertia effects in the collapse of two types of energy absorbing structure, Int J Mech Sci, 26,689-701.
50. Tam LL and Calladine CR (1991), Inertia and strain-rate effects in a simple plate-structure under impact loading, Int J Impact Eng, 11(3), 349-377.
51. Karagiozova D and Jones N (1995), Observations on the dynamic elastic-plastic buckling of a structural model, Int J Impact Eng, 16(4), 621-635.
52. Karagiozova D and Jones N (1995), Note on the inertia and strain rate effects in the Tam and Calladine model, Int J Impact Eng, 16(4) 637-649.
53. Su XY, Yu TX, and Reid SR (1995), Inertia-sensitive impact energy-absorbing structures - Part I: Effects of inertia and elasticity, Int J Impact Eng, 16(4), 651-672.
54. Su XY, Yu TX, and Reid SR (1995), Inertia-sensitive impact energy-absorbing structures - Part II: Effect of strain rate, Int J Impact Eng, 16(4), 673-689.
55. Thornton PH and Yeung KS (1990), Dynamic buckling of sheet steel, Int J Impact Eng, 9(4), 379-388.
56. Zhang Q, Li S, and Zheng JJ (1992), Dynamic response, buckling and collapsing of elastic-plastic straight columns under axial solid-fluid slamming compression - I: Experiments., Int J Solids Struct, 29(3), 381-397.
57. Florence AL, Gefken PR, and Kirkpatrick SW (1991), Dynamic plastic buckling of copper cylindrical shells, Int J Solids Struct, 27(1), 89-103.
58. Pegg NG (1994), Numerical study of dynamic pulse buckling of cylindrical structures, Marine Struct, 7, 189-212.
59. Pegg NG (1991), Dynamic pulse buckling of cylinders of various a/h ratios, J Comput Struct, 39(1/2), 173-183.
60. Pegg NG (1992), Investigation of dynamic pulse buckling of thick rings, ASME JAppl Mech, 59, 615-621.
61. Mustafa B, Al-Hassani STS, and Reid SR (1993), Axisymmetric dynamic buckling of submerged cylindrical shells, Comput Struct, 47(3), 399-405.
62. Symonds PS, Genna F, and Ciullini A (1991), Special cases in study of anomalous dynamic elastic-plastic response of beams by a simple model, Int J Solids Struct, 27(3), 299-314.
63. Lee J-Y and Symonds PS (1992), Extended energy approach to chaotic elastic-plastic response to impulsive loading, Int J Mech Sci, 34(2), 139-157.
64. Lee J-Y, Symonds PS, and Borino G (1992), Chaotic responses of a two-degree-of-freedom elastic-plastic beam model to short pulse loading, Trans. ASME, JAppl Mech, 59(4), 711-721.
65. Lepik U (1994), Dynamic response of elastic-plastic beams with axial constraints, Int J Impact Eng, 15(1), 3-16.
66. Lepik U (1994), Vibrations of elastic-plastic fully clamped beams and flat arches under impulsive loading, Int JNonLinear Mech, 29(4), 613-623.
67. Li QM, Zhao M, and Yang GT (1991), Experimental results on the counter-intuitive behaviour of thin clamped beams subjected to projectile impact, Int J Impact Eng, 11(3), 341-348.
68. Kolsky H, Rush P, and Symonds PS (1991), Experimental observations of anomalous response of fully clamped beams, Int J Impact Eng, 11(4), 445-456.
69. Forrestal MJ, Tzou DY, and Li J (1994), Counterintuitive region of response for elastic-plastic rings loaded with axisymmetric pressure pulses, Int J Impact Eng, 15(3), 219-223.
70. Abramowicz W and Wierzbicki T (1989), Axial crushing of multicorner sheet metal columns, Trans ASME, J Appl Mech, 56(1), 113-120.
71. Wierzbicki T and Recke L (1989), “Ultimate strength of box columns subjected to impact loading,” Int Conf on Mechanical Properties of Materials at High Rates of Strain, Harding J (ed), Inst of Phys Conf Series No 102, 527-534.
72. McGregor IJ, Meadows DJ, Scott CE, and Seeds AD (1993), “Impact performance of aluminium structures,” in Structural Crashworthiness and Failure, Jones N and Wierzbicki T (eds), Elsevier Appl Sci, 385-421.
73. Birch RS and Jones N (1990), Dynamic and static axial crushing of axially stiffened cylindrical shells, J Thin Walled Struct, 9, 29-60.
74. Jones N and Birch RS (1990), Dynamic and static axial crushing of axially stiffened square tubes, Proc IMechE, 204(C), 293-310.
75. Wierzbicki T, Bhat SU, Abramowicz W, and Broydkin D (1992), Alexander revisited - A two folding elements model of progressive crushing of tubes, Int J Solids Struct, 29(24), 3269-3288.
76. Singace AA, Elsobky H, and Reddy TY (1995), Eccentricity factor in the progressive crushing of tubes, Int J Solids Struct, 32(24), 3589-3602.
77. Avalle M and Belingardi G (1995), Strain field history during plastic progressive folding of aluminium circular tubes, in Dynamic Plasticity and Structural Behaviors, Plasticity ‘95, Tanimura, S and Khan AS (eds), Gordon and Breach, 64-67.
78. Reid SR (1993), Material deformation mechanisms in crashworthiness applications, in Advances in Materials and Their Applications, Rama Rao P (ed), Wiley Eastern, 165-200.
79. Reid SR (1993), Plastic deformation mechanisms in axially compressed metal tubes used as impact energy absorbers, Int J Mech Sci, 35(12), 1035-1052.
80. Jones N, Birch SE, Birch RS, Zhu L, and Brown M (1992), Experimental study on the lateral impact of fully clamped mild steel pipes", Proc IMechE, 206(E), 111-127.
81. Wen HM and Jones N (1993), Experimental investigation of the scaling laws for metal plates struck by large masses, Int J Impact Eng, 13(3), 485-505.
82. Atkins AG (1990), Note on scaling in rigid-plastic fracture mechanics, Int JMech Sci, 32(6), 547-548.
83. Lu G and Calladine CR (1990), Cutting of a plate by a wedge, Int J Mech Sci, 32(4), 293-313.
84. Wierzbicki T (1995), Concertina tearing of metal plates, Int J Solids Struct, 32(19), 2923-2943.
85. Wierzbicki T and Thomas P (1993), “Grounding damage of ships,” in Structural Crashworthiness and Failure, Jones N and Wierzbicki T (Eds), Elsevier Appl Sci, London, 467-507.
86. Knoche P and Needleman A (1993), Effect of size on the ductility of dynamically loaded tensile bars, European J Mech, A/Solids, 12(4), 585-601.
87. Needleman A and Tvergaard V (1995), Analysis of brittle-ductile transition under dynamic shear loading, Int J Solids Struct, 32(17/18), 2571-2590.
88. Jones N (1989), Structural Impact, Cambridge Univ Press, Cambridge UK.
89. Yu J and Jones N (1991), Further experimental investigations on the failure of clamped beams under impact loads, Int J Solids Struct, 27(9), 1113-1137.
90. Jones N and Shen WQ, (1993), Criteria for the inelastic rupture of ductile metal beams subjected to large dynamic loads", in Structural Crashworthiness and Failure, Jones N and Wierzbicki T (eds), Elsevier, London, 95-130.
91. Shen WQ and Jones N (1993), Dynamic plastic response and failure of a clamped beam struck transversely by a mass, Int J Solids Struct, 30(12), 1631-1648.
92. Wen HM, Reddy TY, and Reid SR (1995), Deformation and failure of clamped beams under low speed impact loading, Int J Impact Eng, 16(3), 435-454.
93. Shen WQ and Jones N (1992), Failure criterion for beams under impulsive loading, Int J Impact Eng, 12(1), 101-121, and 12(2), 329.
94. Teeling-Smith RG and Nurick GN (1991), Deformation and tearing of thin circular plates subjected to impulsive loads, Int J Impact Eng, 11(1), 77-91.
95. Nurick GN and Teeling-Smith RG (1992), “Predicting the onset of necking and hence rupture of thin plates loaded impulsively - An experimental view,” in Struct Under Shock and Impact II, Bulson, PS (Ed), Comput Mech Publ and Thomas Telford, 431-445.
96. Shen WQ and Jones N (1993), Dynamic response and failure of fully clamped circular plates under impulsive loading, Int J Impact Eng, 13(2), 259-278.
97. Zhao Y-P, Fang J, and Yu TX (1994), Dynamic plastic shear failure analysis for an infinitely large plate with a centred cylinder under impulsive loading, Int J Solids and Struct, 31(11), 1585-1595.
98. Olson MD, Nurick GN, and Fagnan JR (1993), Deformation and rupture of blast loaded square plates - Predictions and the experiments, Int J Impact Eng, 13(2), 279-291.
99. Nurick GN, Olson MD, Fagnan JR, and Levin A (1995), Deformation and tearing of blast-loaded stiffened square plates, Int J Impact Eng, 16(2), 273-291.
100. Nurick GN and Shave GC (1996), The deformation and tearing of thin square plates subjected to impulsive loads - an experimental study, Int J Impact Eng, 18(1), 99-116.
101. Bammann DJ, Chiesa ML, Horstemeyer MF, and Weingarten LI (1993), Failure in ductile materials using finite element methods, in Structural Crashworthiness and Failure, Jones N and Wierzbicki T, (eds), Elsevier Appl Sci, 1-54.
102. Holmes BS, Kirkpatrick SW, Simons JW, Giovanola JH, and Seaman L (1993), Modeling the process of failure in structures, in Structural Crashworthiness and Failure, Jones N and Wierzbicki T, (eds), Elsevier Appl Sci, 55-93.
103. McClintock FA, Zhou Q, and Wierzbicki T (1993), Necking in plane strain under bending with constant tension, J Mech Phys Solids, 41(8), 1327-1343.
104. Mai YW (1993), Plane-stress essential fracture work in plastic failure of ductile materials, Int J Mech Sci, 35(12), 995-1005.
105. Lu G. Ong LS, Wang B, and Ng HW (1994), An experimental study on tearing energy in splitting square metal tubes, Int J Mech Sci, 36(12), 1087-1097.
106. Wen, HM and Jones N (1992), “Semi-empirical equations for the perforation of plates struck by a mass,” in Struct Under Shock and Impact II, Bulson PS (Ed), Comput Mech Publ and Thomas Telford, 369-380.
107. Wen HM and Jones N (1994), Experimental investigation into the dynamic plastic response and perforation of a clamped circular plate struck transversely by a mass, Proc IMechE, 208(C2), 113-137.
108. Langseth M and Larsen PK (1990), Dropped objects’ plugging capacity of steel plates: an experimental investigation, Int J Impact Eng, 9(3), 289-316.
109. Langseth M and Larsen PK (1992), Behavior of square steel plates subjected to a circular blunt ended load, Int J Impact Eng, 12(4), 617-638.
110. Langseth M and Larsen PK (1994), Dropped objects’ plugging capacity of aluminium alloy plates, Int J Impact Eng, 15(3), 225-241.
111. Liu D and Stronge WJ (1995), Perforation of rigid-plastic plate by blunt missile, Int J Impact Eng, 16(5/6), 739-758.
112. Crouch IG, Baxter BJ, and Woodward RL (1990), Empirical tests of a model forthin plate perforation, Int J Impact Eng, 9(1), 19-33.
113. Corbett GG and Reid SR (1993), Quasi-static and dynamic local loading of monolithic simply-supported steel plate, Int J Impact Eng, 13(3), 423-441.
114. Goldsmith W, Tam E, and Tomer D (1995), Yawing impact on thin plates by blunt projectiles, Int J Impact Eng, 16(3), 479-498.
115. Li K and Goldsmith W (1996), Analytical model for tumbling projectile perforation of thin aluminium plates, Int J Impact Eng, 18(1), 45-63.
116. Corbett GG, Reid SR, and Al-Hassani STS (1990), Static and dynamic penetration of steel tubes by hemispherically nosed punches, Int J Impact Eng, 9(2), 165-190.
117. Wierzbicki T and Hoo Fatt MS (1992), Impact response of a string-on-plastic foundation, Int J Impact Eng, 12(1), 21-36.
118. Wierzbicki T and Hoo Fatt MS (1993), Damage assessment of cylinders due to impact and explosive loading, Int J Impact Eng, 13(2), 215-241.
119. Stronge WJ (1993), Impact on metal tubes: indentation and perforation, in Structural Crashworthiness and Failure, Jones N and Wierzbicki T (eds), Elsevier Appl Sci, 165-188.
120. Reid SR and Prinja NK (1989), “Mechanics of pipe whip,” in Proc Int Mech Eng Conf on Pipework Engineering and Operation, IMechE. paper C376/044, 315-326.
121. Stronge WJ and Yu TX (1989), Dynamic plastic deformation in strain hardening and strain softening cantilevers, Int J Solids and Struct, 25(7), 769-782.
122. Reid SR, Hua YL, and Yang JL (1990), Development of double hinge mechanisms in a bent cantilever subjected to an out-of-plane force puls e, Int J Impact Eng, 9(4), 485-502.
123. Wang B (1994), Response of a bent cantilever to an impulsive load applied at its tip normal to its plane, Int J Solids Struct, 31(10), 1377-1392.
124. Reid SR, Wang B, and Yu TX (1995), Yield mechanisms of a bent cantilever beam subjected to a suddenly applied constant out-of-plane tip force, Int J Impact Eng, 16(1), 49-73.
125. Reid SR, Wang B, and Hua YL (1995), Triple plastic hinge mechanism for a bent cantilever beam subjected to an out-of-plane tip force pulse of finite duration, Int J Impact Eng, 16(1), 75-93.
126. Yu TX, Reid SR, and Wang B (1993), Hardening-softening behavior of tubular cantilever beams, Int J Mech Sci, 35(12), 1021-1033.
127. Reid SR, Yu TX, and Yang JL (1995), Response of an elastic, plastic tubular cantilever beam subjected to a force pulse at its tip - Small deflection analysis, Int J Solids Struct, 32(23), 3407-3421.