Simulation and analysis of birefringence in magneto-optical discs. Part A: Formulation

Journal of Materials Processing and Manufacturing Science

Volumn 5, Issue 2, 1996, Pages 95-113

  Friedrichs, B ^a,b   Horie, M ^a   Yamaguchi, Y ^a  

^a MITSUBISHI CHEMICAL CORPORATION   (Japan)

^b BMW AG   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

BIREFRINGENCE; COMPUTATIONAL METHODS; COMPUTER SIMULATION; HEAT TRANSFER; INJECTION MOLDING; MATHEMATICAL MODELS; STRESSES; SUBSTRATES; THREE DIMENSIONAL; VISCOELASTICITY;

ENERGY EQUATION; HELE-SHAW MODEL; LEONOV MODEL; NON ISOTHERMAL CONDITIONS; STRESS OPTICAL COEFFICIENT;

MAGNETOOPTICAL DEVICES;

EID: 0030257899     PISSN: 10620656     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (45)

1. Wu, V. P. and J. L. White. 1991. "Study of Birefringence of Injection- and Compression-Molded Polycarbonate and Its Interpretation," Poly. Eng. Sci., 31(9):652-660.
2. Dietz, W., J. L. White and E. S. Clark. 1978. "Orientation Development and Relaxation in Injection Molding of Amorphous Polymers," Poly. Eng. Sci., 18(4):273-281.
3. Isayev, A. I., and C. A. Hieber. 1980. "Toward a Viscoelastic Modeling of the Injection Molding of Polymers," Rheol. Acta, 19:168-182.
4. Wang, K. K., C. Cohen, D. L. Koch, C. A. Hieber, K. Yoon, M. Gupta and O. G. Harlen. 1991. "Modeling Flow-Induced Frozen-in Birefringence," in Progress Report No. 16, Cornell Injection Molding Program (CIMP), Cornell University, Ithaca, pp. 295-309.
5. Flaman, A. A. M. 1993. "Buildup and Relaxation of Molecular Orientation in Injection Molding. Part I: Formulation," Poly. Eng. Sci., 33(4):193-201.
6. Flaman, A. A. M. 1993. "Buildup and Relaxation of Molecular Orientation in Injection Molding. Part II: Experimental Verification," Poly. Eng. Sci., 33(4):202-210.
7. Muki, R. and E. Sternberg. 1961. "On Transient Thermal Stresses in Viscoelastic Materials with Temperature-Dependent Properties," J. Appl. Mech., pp. 193-207.
8. St. Jacques, M. 1982. "An Analysis of Thermal Warpage in Injection Molded Flat Parts Due to Unbalanced Cooling," Poly. Eng. Sci., 22(4):241-247.
9. Santhanam, N. 1992. "Analysis of Residual Stresses and Post-Molding Deformation in Injection-Molded Components," Cornell Injection Molding Program (CIMP) Technical Report No. 71, Cornell University, Ithaca.
10. Eduljee, R. F., J. W. Gillespie and R. L. McCullough. 1994. "Residual Stress Development in Neat Polyetheretherketone," Poly. Eng. Sci., 34(6):500-506.
11. Wimberger-Friedl, R. and R. D. H. M. Hendriks. 1989. "The Measurement and Calculation of Birefringence in Quenched Polycarbonate Specimens," Polymer, 30:1143-1149.
12. Shyu, G. D. and A. I. Isayev. 1992. "Residual Thermal Birefringence in Quenched Amorphous Polymers," in proceedings ANTEC 92, SPE, pp. 549-553.
13. Baaijens, E P. T. 1991. "Calculation of Residual Stresses in Injection Molded Products," Rheol. Acta, 30:284-299.
14. Douven, L. 1991. "Towards the Computation of Properties in Injection Moulded Products: Flow- and Thermally-Induced Stresses in Amorphous Thermoplastics," Ph.D. thesis, Technical University of Eindhoven, the Netherlands.
15. Kurosaki, Y., I. Satoh and H. Kim. 1992. "Effects of Cooling Conditions on the Residual Stress Development Frozen in an Injection-Molded Polymer Strip" in Proceedings of the 2nd JSME-ASME Thermal Engineering Conference, October 19-21.
16. Shyu, G. D. 1993. "Birefringence and Residual Stresses in Molded Articles of Amorphous Polymers," Ph.D. thesis, the University of Akron.
17. Rudd, J. F. and R. D. Andrews. 1960. "Photoelastic Properties of Polystyrene in the Glassy State. III. Styrene Derivatives and Copolymers," J. Appl. Phys., 31(5):818-826.
18. H. Janeschitz-Kriegl, 1983. Polymer Melt Rheology and Flow Birefringence. NY: Sringer-Verlag.
19. Read, B. E. 1983. "Viscoelastic Behavior of Amorphous Polymers in the Glass-Rubber Transition Region: Birefringence Studies,"' Poly. Eng. Sci., 23(15):835-843.
20. Wimberger-Friedl, R. and J. G. De Bruin. 1991. "The Time-Dependent Stress-Optical Behavior of Polycarbonate in the Glass-Transition Region," Rheol. Acta, 30:419-429.
21. Osaki, K., T. Inoue, E. J. Hwang, H. Okamoto and O. Takiguchi. 1994. "Dynamic Birefringence of Amorphous Polymers," J. Non-Cryst. Solids, pp. 172-174, 838-849.
22. Wimberger-Friedl, R. and J. G. De Bruin. 1993. "Birefringence in Polycarbonate: Molecular Orientation Induced by Cooling Stresses. I. Free Quenching," J. Poly. Sci., Part B, 31:1041-1049.
23. Richardson, S. 1972. "Hele-Shaw Flows with a Free Boundary Produced by the Injection of Fluid into a Narrow Channel," J. Fluid Mech., 56(4):609-618.
24. Mavridis, H., A. N. Hrymak and J. Vlachopoulos. 1988. "The Effect of Fountain Flow on Molecular Orientation in Injection Molding," J. Rheo., 32(6):639-661.
25. Friedrichs, B. and S. I. Güceri. 1993. "A Novel Hybrid Numerical Technique to Model 3-D Fountain Flow in Injection Molding Processes," J. Non-Newt. Fluid Mech., 49:141-173.
26. Dussan, E. B. 1976. "The Moving Contact Line: The Slip Boundary Condition," J. Fluid Mech., 77(4):665-684.
27. Lenov, A. I. "Nonequilibrium Thermodynamics and Rheology of Viscoelastic Polymer Media," Rheol. Acta, 15(2):85-98.
28. Leonov, A. I. 1987. "On a Class of Constitutive Equations for Viscoelastic Liquids," J. Non-Newt. Fluid Mech., 25:1-59.
29. Isayev, A. I. 1987. Injection and Compression Molding Fundamentals, NY: Marcel Dekker.
30. Greiner, R. and F. R. Schwarzl. 1984. "Thermal Contraction and Volume Relaxation of Amorphous Polymers," Rheol. Acta, 23:378-395.
31. Tadmor, Z. and C. G. Gogos. 1979. Principles of Polymer Processing, NY: John Wiley & Sons.
32. Lord, H. A. and G. Williams. 1975. "Mold Filling Studies for the Injection Molding of Thermoplastic Materials," Poly. Eng. Sci., 15(8):569-582.
33. Wang, V. W., C. A. Hieber and K. K. Wang. 1987. "C-FLOW: A CAE Package with High-Level Interactive Graphics," in Applications of Computer Aided Engineering in Injection Molding, L. T. Manzione, ed. NY: Hanser Publishers.
34. Boley, B. A. and J. H. Weiner. 1960. Theory of Thermal Stresses, NY: John Wiley & Sons.
35. Ferry, J. D. 1980. Viscoelastic Properties of Polymers, 3rd Edition, NY: John Wiley & Sons.
36. Frutiger, R. L. and T. C. Woo. 1979. "A Thermoviscoelastic Analysis for Circular Plates of Thermorheologically Simple Material," J. Therm. Stress, 2:45-60.
37. Struik, L. C. E. 1986. "Physical Aging: Influence of the Deformation Behavior of Amorphous Polymers," in Failure of Plastics, W. Brostow and R. G. Corneliussen, ed. NY: Hanser Publishers.
38. Rusch, K. C. 1968. "Time-Temperature Superposition and Relaxational Behavior in Polymeric Glasses," J. Macromol. Sci.-Phys., B2(2):179-204, June.
39. Kovacs, A. J. 1961. "Bulk Creep and Recovery in Systems with Viscosity Dependent upon Free Volume," Trans. Soc. Rheol., 5:285-296.
40. Thompson, J. F., Z. V. A. Marsi and C. W. Mastin. 1982. "Boundary-Fitted Coordinate Systems for Numerical Solutions of Partial Differential Equations-A Review" J. Comp. Phys., 47:1-108.
41. Subbiah, S., D. L. Trafford and S. I. Güçeri. 1989. "Non-Isothermal Flow of Polymers into Two-Dimensional, Thin Cavity Molds: A Numerical Grid Generation Approach" J. Heat Mass Transfer, 32(3):415-434.
42. Anderson, D. A., J. C. Tannehill and R. H. Pletcher. 1984. Computational Fluid Mechanics and Heat Transfer, Series in Computational Methods in Mechanics and Thermal Sciences, NY: Hemisphere.
43. Roache, R. J. 1972. Computational Fluid Dynamics, Albuquerque, NM: Hermosa Publishers.
44. Leonard, B. P. 1979. "A Stable and Accurate Convective Modelling Procedure Based on Quadratic Upstream Interpolation," Comp. Methods Appl. Mech. Eng., 19:59.
45. Subbiah, S. 1989. "A Numerical Analysis of the Filling of Irregular Thin Cavities with Non-Isothermal, Non-Newtonian Fluids," Ph.D. thesis, University of Delaware.