Inclusion problems

Applied Mechanics Reviews

Volumn 49, Issue 10 PART 2, 1996, Pages

  Mura, T ^a   Shodja, H M ^a   Hirose, Y ^b  

^a Northwestern University   (United States)

^b KANAZAWA UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITE MICROMECHANICS; CRACK PROPAGATION; ELASTIC MODULI; FRACTURE TOUGHNESS; INCLUSIONS; MATHEMATICAL MODELS; STRAIN; STRESS ANALYSIS; STRESS INTENSITY FACTORS;

EIGENSTRAINS; STRESS DISTURBANCES;

COMPOSITE MATERIALS;

EID: 0030257612     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (228)

1. Accorsi HL and Nemat-Nasser S (1986), Bounds on the overall elastic and instantaneous elastoplastic moduli of periodic composites, Mech Mat, 5, 209-220.
2. Aleksandrow AY and Olegin PI (1985), Three-dimensional stressed state of an elastic medium containing an axisymmetric system of spherical concentrators, Izv Akad Nauk SSSR, Mekhanika Tverdogo Tela, 20, 85-92.
3. Alzebdeh K and Ostoja-Starzewski M (1993), Micromechanically based stochastic finite elements, Finite Elements in Anal and Des, 15, 35-41.
4. Alzebdeh K and Ostoja-Starzewski M (1995), "Micromechanically based stochastic finite elements: Length scales and anisotropy," in Special issue on: Stochastic Structural Dynamics, Int J of Non-Linear Mech, under review.
5. Asaro RJ and Needleman A (1985), Texture development and strain hardening in rate dependent polycrystals, Overview No 42, Acta Metall, 33, 923-953.
6. Baik J and Thompson RB (1985), Long wave length elastic scattering from a planar distribution of inclusions, J Appl Mech, 52, 974-976.
7. Barber J and Triantafyllidis N (1985), Effect of debonding on the stability of fiber-reinforced composites, J Appl Mech, 52, 235-237.
8. Beltzer AI and Brauner N (1986), The casual effective field approximation-application to elastic waves in fibrous composites, Mech Mat, 5, 161-170.
9. Benveniste Y (1984), Effect of debonding on the overall behavior of composite material, Mech Mat, 3, 349-358.
10. Benveniste Y and Aboudi J (1984), Continuum model for fiber reinforced materials with debonding , Int J Solids Struct, 20, 935-951.
11. Benveniste Y (1985), Effective mechanical behavior of composite materials with imperfect contact between the constituents, Mech Mat, 4, 197-208.
12. Bernar II and Opanasovich VK (1984), State of stress of plate with a thin-walled inclusion along the arc of a circle, Prikl Math Mekh, 47, 206-213.
13. Bostrom A and Karlsson A (1985), Point-force excitation of an elastic plate with an embedded cavity, J Appl Mech, 52, 937-942.
14. Budiansky B, Hutchinson JW, and Slutsky S (1983), "Void growth and collapse in viscous solids," in Mechanics of Solids, the Rodney Hill 60th Anniversary, Hopkins HG and Sewell MJ (eds), Pergamon, Oxford, 13-45,
15. Budiansky B (1983), Micromechanics, Comput Struct, 16, 3-12.
16. Budiansky B, Hutchinson JW, and Lambropolous JC (1983), Continuum theory of dilatent transformation toughening in ceramics, Int J Solids Struct, 19, 337-355.
17. Budiansky B, Hutchinson JW, and Evans AG (1986), Matrix fracture in fiber-reinforced ceramics, J Mech Phys Solids, 34, 167-189.
18. Castles RR and Mura T (1985), Analysis of eigenstrains outside of an ellip-soidal inclusion, J Elast, 15, 27-34.
19. Chen DH and Nishitani H (1992), Elastic parameters influencing the stress fields in multi-phase composite, Japanese Soc Mech Eng, 55, 1209
20. Chen DH, Nishitani H, and Mura T (1994), Effect of elastic constants on stress in multi-phases under plane deformation, Eng Frac Mech, 48, 347-357.
21. Cherkaev AV, Lurie KA, and Milton GW (1992), Invariant properties of the stress in plane elasticity and equivalent classes of composites, Proc R Soc London A, 438, 519-529.
22. Choi BI and Earmme YY (1986), Interaction of spherical precipitates in an anisotropic matrux, Mech Mat, 5, 121-136.
23. Coussy O (1986), Scattering of SH-waves by a rigid elliptic fiber partially debonded from its surrounding matrix, Mech Res Commun, 13, 39-45.
24. Dassios G and Kiriaki K (1986), The rigid ellipsoid in the presence of a low frequency elastic wave, Appl Math, 43, 435-457.
25. Demir I and Zbib HM (1994), Interface ring dislocation in fiber-matrix composites: Approximate analytical solution, J Eng Mat Tech. 116 279-285.
26. Dragon A (1985), Plastile and ductile fracture damage: Study of void growth in metals, Eng Fracture Mech, 21, 875-885.
27. Dryden JR, Deakin AS, and Shinozaki DM (1986), Analysis of deformation within anisotropic polymer spherulites, J Mech Phys Solids, 34, 81-96.
28. Dunand DC and Montensen A (1991), Relaxation of a mismatched spheroid by prismatic loop punching, Scripta Metall, 25, 761-266.
29. Duva JM (1986), Constitutive description of nonlinear materials containing voids, Mech Mat, 5, 137-144.
30. Dvorak GJ (1990), Uniform fields in heterogeneous media, Proc R Soc London, A431, 89-110.
31. Dvorak GJ (1992), Transformation strains and uniform fields in multiphase elastic media, Proc R Soc London, A437, 291-310.
32. Dvorak GJ (1992), Transformation field analysis of inelastic composite materials, Proc R Soc London, A437, 311-327.
33. Eldiwany BH and Wheeler LT (1986), Rigid inclusions of minimum stress concentration, J Mech Phys Solids, 34, 19-18.
34. Eshelby JD (1957), Determination of the elastic field of an ellipsoidal inclusion, and related problems, Proc R Soc London, A241, 376-396.
35. Eshelby JD (1959), Elastic field outside an ellipsoidal inclusion, Proc R Soc London, A251, 561-569.
36. Eshelby JD (1961), "Elastic inclusions and inhomogeneities," in Progress in Solid Mechanics, Sneddon IN and Hill R (Eds), North-Holland, Amsterdam, 89-140.
37. Fan H, Keer LM, and Mura T (1992), Inhomogeneity problem revisited via the modulus perturbation approach, Int J Solids Struct, 29, 2583-2594.
38. Fu LS and Mura T (1983), Determination of the elastodynamic fields of an ellipsoidal inhomogeniety, J Appl Mech, 105, 390-396.
39. Gilormini N and Montheillet F (1986), Deformation of an inclusion in a viscous matrix and induced stress concentrations, J Mech Phys Solids 34, 97-123.
40. Gong SX and Meguid SA (1993), Interacting circular inhomogeneities in plane elastostatics, Acta Mechanica, 99, 49-60.
41. Gottesman T and Mikulinsky M (1984), Influence of matrix degradation on composite properties in fiber direction, Eng Fracture Mech, 20, 667-674.
42. Hasebe N, Nemat-Nasser S, and Keer LM (1984), Stress analysis of a kinked crack initiating from a rigid line inclusion - Part II: Direction of propagation, Mech Mat, 3, 147-156.
43. Hasegawa H, Lee V-G, and Mura T (1992), Green's functions for axisymmetric problems of dissimilar elastic solids, J Appl Mech, 59, 312-320.
44. Hasegawa H, Lee V-G, and Mura T (1992), Stress fields caused by a circular cylindrical inclusion, J Appl Mech, 59, 107-114.
45. Hasegawa H, Liang RH, and Mura T (1992c), Thermal stress in a half-space with cylindrical inhomogeneous inclusion, J Thermal Stresses, 15, 295-310.
46. Hashin Z and Shtrikman S (1963), Variational approach to the elastic behavior of multiphase materials, J Mech Phys Solids, 11, 127-240.
47. Hashin Z (1985), Analysis of cracked laminates: A variational approach, Mech Mat, 4, 121-136.
48. Hashin Z (1985), Large isotropic elastic deformation of composites and porous media, In: J Solids Struct, 21, 711-720.
49. Hatta H and Taya M (1986a), Equivalent inclusion method for steady state beat conduction in composites, Int J Eng Sci, 24, 1159-1172.
50. Hatta H and Taya M (1986b), Thermal conductivity of coated filler composites, J Appl Phys, 59, 1851-1860.
51. Hayakawa M and Oka M (1984), Calculation of elastic strain energy and the prediction of the habit plane for ferrous martensites, Acta Metall, 32, 1415-1422.
52. Hayashi K (1982), Singular behavior at the end of a ribbon-like rigid inclusion embedded in an elastic-plastic material, Mech Mat, 1, 203-208.
53. Havashi K (1984), Singular stress field at the end of a ribbon-like inclusion in a hardening material under longitudinal shear, Int J Fracture, 24, R121-R125.
54. Hlavacek M (1986), Effective elastic properties of materials with high concentration of aligned spheroidal pores, Int J Solids Struct, 22, 315-332.
55. 2 precipitate in bcc iron: Elastic theory, Acta Metall, 32, 279-288.
56. Hori M and Nemat-Nasser S (1993), Double-inclusion model and overall moduli of multi-phase composites, Mech. Mat, 14, 189-206.
57. Hori M and Nemat-Nasser S (1994), Double-inclusion model and overall moduli of multi-phase composites, J Eng Mat Tech, Trans ASME, 116, 305-309.
58. Horii H and Nemat-Nasser S (1983), Overall moduli of solids with microcracks: Load-induced anisotropy, J Mech Phys Solids, 31, 155-171.
59. Horii H and Nemat-Nasser S (1985), Elastic fields of interacting inhomogeneities, Int J Solids Struct, 21, 731-745.
60. Huang JH and Mura T (1992), Eshelby's tensor for an incoherent spherical inclusion, Defects and anelasticity in the characterization of compatible solids, Brock LM (ed), AMD, 148, 10-17.
61. Huang JH and Mura T (1993), "Recent results on the elastic theory of inclusions, Micromechanics of random media," edited by Ostoja-Starzewski M and Jasiuk I (eds), Symp Proc ASCE-ASME-SES Joint Meeting, June 6-9, 1993, 10-17.
62. Huet C (1990), Application of variational concepts to size effects in elastic heterogeneous bodies, J Mech Phys Solids, 38, 813-841.
63. Hussain MA and Pu SL (1971), Slip phenomenon for a circular inclusion, J Appl Mech, 38, 627-633.
64. Isida M and Nemat-Nasser S (1987a), Unified analysis of various problems relating to circular holes with edge cracks, Eng Fracture Mech, 27(5), 571-591.
65. Isida M. Nemat-Nasser S (1987b), Mechanics of crack growth and its effects on the overall response of brittle porous solids, Acta Metall, 35(12), 2887-2898.
66. Iwakuma T and Nemat-Nasser S (1983), Composites with periodic microstructure, Comput Struct, 16, 13-19.
67. Iwakuma T and Nemat-Nasser S (1984), Finite elastic-plastic deformation of polycrystalline metals, Proc R Soc London, A394, 87-119.
68. Jansson S and Stigh U (1985), Influence of cavity shape on damage parameter, J Appl Mech, 52, 609-614.
69. Jasiuk I (1995), Cavities vis-A-vis rigid inclusions: elastic moduli of materials with polygonal inclusions, Int J Solids Struct, 32, 407-422.
70. Jasiuk I, Chen J, and Thorpe MF (1992), Elastic moduli of composites with rigid sliding inclusions, J Mech Phys Solids, 40, 373-391.
71. Jasiuk I, Chen J, and Thorpe MF (1994), Elastic moduli of two dimensional materials with polygonal and elliptic holes, Appl Mech Rev, 47, 18-28.
72. Jasiuk I and Ostoja-Starzewski 1993), "Interface problem: Random microstructure and meso-continuum model," Control of interfaces in metal and ceramic composites, Lin R and Fishman SG (eds), TMS Meeting, San Francisco, Feb/Mar 1994, 317-325.
73. Jedidi A, Hiroshima K, and Mura T, (1995a), Analytical solutions for anisotropic bimaterials under several boundary conditions on the interface, Arch Appl Mech, 65, 66-75.
74. Jedidi A, Hirashima K, Yao C, and Mura T (1995b), Out-of-plane loading of anisotropic bimaterials and semi-infinite materials, Arch Appl Mech, 65, 76-85.
75. Ju TW (1992), Recent advances in damage mechanics and plasticity, AMD 132, MD 30, ASME.
76. Jun S and Jasiuk I (1993), Elastic moduli of 2D composites with sliding Inclusions: A comparison of effective medium theories, Int J Solids and Struct, 30, 2501-2523.
77. Kachanov LM (1958), Time to failure under creep condition, Izv Akad Nauk SSSR, Otd tekhn, 8, 26-31.
78. Kachanov M (1992), Effective elastic properties of cracked solids - Critical review of some basic concepts: Micromechanical modeling of quasibrittle behavior; Appl Mech Rev, Li VC (ed), 45, 304-335.
79. Kantor Y and Bergman DJ (1984), Improved rigorous bound on the effective elastic moduli of a composite material, J Mech Phys Solid 32 41-62.
80. Karihaloo BL and Viswanathan K (1985), Elastic field of partially debonded elliptic inhomogeneity in an elastic matrix (plane-strain), J Appl Mech, 52, 835-840.
81. Kinra VK and P Li (1986), Resonant scattering of elastic waves by a random distribution of inclusions, Int J Solids Struct, 22, 1-11
82. Kinra VK and Milligan KB (1994), Second law analysis of thermo elastic damping, J Appl Mech, 61, 71-76.
83. Kinra VK, Jaminet PT, Zhu C, and Iyer VR, (1994), Simultaneous measurement of the acoustical properties of a thin-layered medium: The inverse problem, J Acoust Soc Am, 95, 3059-3074.
84. Kinra VK and Vasudevan RT (1995), Ultrasonic measurement of the thickness, phase velocity, density on attenuation of a thin viscoelastic plate - Part I and Part II, Ultrasonics, 33, 95-109; and 111-122.
85. Kouris DA and Mura T (1989a), Elastic field of a hemispherical inhomogeneity at the free surface of an elastic half space, J Mech Phys Solids, 37(3), 365-379.
86. Kouris DA, Tsuchida E, and Mura T (1989b), Hemispheroidal inhomogeneity at the free surface of an elastic half space, J Appl Mech, 56, 70-76.
87. Kouris DA (1990), Effect of normal pressure on the stress distribution along a bi-material interface, European J Mech, A/Solids, 9(6), 551-562.
88. Kouris DA and Tsuchida E (199), Elastic interaction between two fibers in a continuous fiber composite under thermal loading, Mech Mat, 12, 131-146.
89. Kouris DA and Tsuchida E (1992), Analytical solution for the fiber indentation problem, European J Mech, A/Solids, 11(3), 323-334.
90. Kouris DA and Nuxoll JP (1993a), Elastica analysis of the half plane inhomogeneity problem, Acta Mech, 97, 169-184.
91. Kouris DA (1993b), Stress concentration due to the interaction of two imperfectly bonded fibers in a continuous fiber composite, J Appl Mech, 60(1), 203-206.
92. 3Al matrix composites, J Eng Mat Tech, 116, 319-324.
93. Krajcinovic D (1984), Continuum damage mechanics, Appl Mech Rev, 37, 1-6.
94. Krajcinovic D (1987), Micromechanical basis of phenomenological models, Continuum damage mechanics theory and application, Krajcinovic D and Lemaitre J (eds), Springer-Verlag, Wien, Austria, 195-206.
95. Krajcinovic D (1989), Damage mechanics, Mech Mat, 8, 117-197.
96. Kunin IA (1983), Elastic media with microstructure - II, Springer-Verlag, NY.
97. Kunin IA and Gommerstadt B (1985), Elastic crack-inclusion interaction, Int J Solids Struct, 21, 757-766.
98. Lee JK (1995), Coherency strain analysis via a discrete atom method, Scripta Metall et Mat, 32, 559-564.
99. Lee M. Jasiuk I, and Tsuchida E (1992), Sliding circular inclusion in an elastic half-space, J Appl Mech, 114, s57-s64.
100. Lee S and Hsu CC (1985), Thermoelastic stress due to surface parallelepiped perturbed spherical inclusion, Acta Metall, 33, 985-989.
101. Lee V-G and Mura T (1994), Load transfer from a finite cylindrical fiber into an elastic half-space, J Appl Mech, 61, 971-975.
102. Leo PH, Iwan J, Alexander D, and Sekerka RF (1985), Elastic fields about a perturbed spherical inclusion, Acta Metall, 33, 985-989.
103. Li H, Zhong WF, and Li GF (1985), Method of equivalent inclusions in elastodynamics and the scattering fields of two ellipsoidal inhomogeneities, Appl Math Mech Shanghai, 6, 511-521.
104. Li S H, Li Z, Mura T, and Shah SP (1992), Multiple fracture of fiber-reinforced brittle matrix composites based on micromechanics, Eng Fracture Mech, 43, 501-579.
105. Li SH, Shah SP, Li Z, and Mura T (1993), Micromechanical analysis of multiple fracture and evaluation of debonding behavior for fiber-reinforced composites, Int J Solids Struct, 30, 1429-1459.
106. Liu XH and Erdogan F (1985), Crack-inclusion interaction problem, Eng Fracture Mech, 23 821-832.
107. Loges F, Michel B, and Christ A (1985), Interaction energy between a spheroidal defect and the surface of an elastic solid, Z Angew Math Mech, 65, 65-69.
108. Luo HA and Weng GJ (1989), Eshelby's S-tensor in a three-phase cylindrically concentric solid, and the elastic moduli of fiber-reinforced composites, Mech Mat, 8, 77-89.
109. 3Al matrix composites, Acta Metall Mat, 42(8), 2657-2673.
110. Masumura RA and Chou YT (1982), Antiplane eigenstrain problem of an elliptic inclusion in an anisotropic half space, J Appl Mech, 49, 52-54.
111. Meisner MJ and Kouris DA (1995), Interaction of two elliptic inclusions, Int J Solids Struct, 32(3/4), 451-466.
112. Mikata Y (1994), Stress fields in a continuous fiber composite with a variable interphase under thermo-mechanical loadings, J Eng Mat Tech, 116, 367-377.
113. Mikata Y and Nemat-Nasser S (1990), Elastic field due to a dynamically transforming spherical inclusion, J Appl Mech, 57, 845-849.
114. Mikata Y and Nemat-Nasser S (1991), Interaction of a harmonic wave with a dynamically transforming inhomogeneity, J Appl Phys, 70(4), 2071-2078.
115. Mikata Y and Taya M (1985a) Stress field in a coated continuous fiber composite subjected to thermo-mechanical loadings, J Composite Mat, 19, 554-578.
116. Mikata Y and Taya M (1985b) Stress field in and around a coated short fiber in an infinite matrix subjected to uniaxial loadings, J Appl Mech, 52, 19-24.
117. Mikata Y and Taya M (1986), Thermal stress in a coated short fiber composite, J Appl Mech, 53, 681-689.
118. Mol kow VA and Pebedrya BE (1985), Effective characteristics of a unidirectional fiber composite with a periodic structure, Izv Akad Nauk SSSR, Mekh Tverdogo Tela, 20, 119-130.
119. Monzen R, Suzuki K, Sato A, and Mori T (1983), Internal friction caused by diffusion around a second phase particle, Acta Metall, 31, 519-524.
120. Mori T and Tanaka K (1973), Average stress in matrix and average energy of materials with misfitting inclusions, Acta Metall, 21, 571-574.
121. Mori T, Koda T, Monzen R, and Mura T (1983), Particle blocking in grain boundary sliding and associated internal friction, Acta Metall, 31, 275-283.
122. Mori T (1985), "Suppression of grain boundary sliding by second phase particles," in Fundamentals of deformation and fracture, Bilby BA, Miller KJ, and Willis JR, (eds), Cambridge Univ Press, Cambridge 277-291.
123. Mura T (1982), Micromechanics of defects in solids, Martinus Nijhoff, The Hague.
124. Mura T and Furuhashi R (1984), Elastic inclusion with a sliding interface, J Appl Mech, 51, 308-310.
125. Mura T, Jasiuk I, and Tsuchida E (1985), Stress field of a sliding inclusion, Int J Solids Struct, 21, 1165-1179.
126. Mura T, Lin TY, and Qin S (1995), "Thermal stresses in triangular and rectangular inclusion," First Int Symp on Thermal Stresses, Hetranshi RB, Noda N, and Tuji T (eds), Shizurka Univ Japan, 207-210.
127. Mura T, Shirai H, and Weertman JR (1983), "Elastic strain energy of dislocation structures in fatigued metals," Defects, Fracture and Fatigue, Sih G and Provan JW (eds), Martinus Nijhoff, 65-73.
128. Mura T, Shodja HM, Lin TY, Safadi A, and Makkawy A (1994), Determination of the elastic field of a pentagonal star shaped inclusion, Bull Tech Univ of Istanbul, Dedicated to 60th Birthday of SS Erdogan 47 267-280.
129. Mura T and Taya M (1985), "Residual stresses in and around a short fiber in metal matrix composites due to temperature change," in Recent advances in composites, Vinsoin JR and Taya M (eds), ASTM P864, ASTM, Philadelphia 209-224.
130. Murakami Y (1992), Stress intensity factors handbook, Society of Materials Science; Japan, 3, Pergamon Press.
131. Murakami Y and Endo M (1994), Effects of defects, inclusions and inhomogeneities on fatigue strength, Fatigue, 116, 163-182.
132. Mussot P, Rey C, and Zaoui A (1985), Grain boundary sliding and strain compatibility, Res Mech, 14, 69-74.
133. Nemat-Nasser S, Iwakuma T, and Hejazi M (1982), Composites with periodic structure, Mech Mat, 1, 239-267.
134. Nemat-Nasser S and Iwakuma T (1983), Finite elastic-plastic deformation of composites, in Mechanics of composite materials: recent advances Hasnin Z, and Herakovich CT (eds), Oxford: Pergamon Press, 47-55.
135. Nemat-Nasser S and Obata M (1986), Rate-dependent, finite elasto-plastic deformation of polycrystals, Proc R Soc London, Ser A, 407, 343-375.
136. Nemat-Nasser S, Iwakuma T, and Accorsi M (1986), Cavity growth and grain boundary sliding in polycrystalline solids, Mech Mat, 5, 317-329.
137. Nemat-Nasser S and Hori M (1987), Toughening by partial or full bridging of cracks in ceramics and fiber reinforced composites, Mech Mat, 6, 245-269.
138. Nemat-Nasser S and Hori M (1987), Void collapse and void growth in crystalline solids, J Appl Phys, 62(7), 2746-2757.
139. Nemat-Nasser S and Hori M (1993), Micromechanics: Overall properties of heterogeneous materials, North-Holland.
140. Nemat-Nasser S and Chang S-N (1990), Compression-induced high strain rate void collapse, tensile cracking, and recrystallization in ductile single and polycrystals, Mech Mat, 10, 1-17.
141. Neumeister JM (1992), Role of elastic constants in multiphase contact problem, J Appl Mech, 59, 328-334.
142. Niwa Y, Hirose S, and Kitahara M (1986), Application of the boundary integral equation method to transient response analysis of inclusions in a half space, Wave Motion, 8, 77-91.
143. Noble B and Hussain MA (1969), Exact solution of certain dual series for indentation and inclusion problems, Int J Eng Sci, 7, 1149-1161.
144. Nomura S and Chou TW (1984), Bounds for elastic moduli of multiphase short-fiber composites, J Appl Mech, 51, 540-545.
145. Nomura S and Chou TW (1985), Viscoelastic behavior of short-fiber composite materials, Int J Eng Sci, 23, 193-199.
146. Nomura S and Oshima N (1985), Method to estimate the overall behavior of fiber-reinforced hybrid composites, Composite Tech Rev (Fall) 88-92.
147. Noyan IC (1983), Equilibrium condition for the average stresses measured by X-rays, Metall Trans, 14A, 1907-1914.
148. Nunan KC and Keller JB (1984), Effective elasticity tensor of a periodic composite, J Mech Phys Solids, 32, 259-280.
149. Olson GR, Azrin M, and Wright ES (1987), "Innovations in ultrahigh strength steel technology," Sagamore Army Materials Res Conf Proc, 127-146.
150. Olsson P (1985), Rigid movable inclusion in elastostatics and elastodynamics, Wave Motion, 7, 421-445.
151. Onat ET (1984), Effective properties of elastic materials that contain penny shaped voids, Int J Eng Sci, 22, 1013-1021.
152. Oshima N and Nomura S (1985), Method to calculate effective modulus of hybrid composite materials, J Composite Mat, 19, 287-293.
153. Ostoja-Starzewski M (1993a), Micromechanicas as a basis of random elastic continuum approximations, Probabilistic Eng Mech, 8(2), 107-114.
154. Ostoja-Starzewski M (1993b), Micromechanics as a basis of stochastic finite elements and differences - an overview, invited paper, Mechanics Pan-America 1993, Crespo da Silva MRM and Mazzilli CEN (eds), Appl Mech Rev, 46(11, Pt 2), S136-S147.
155. Ostoja-Starzewski M (1994a), Micromechanics as a basis of continuum random fields, in Micromechanics of Random Media, Appl Mech Rev, 47(1, Pt 2), S221-S230.
156. Ostoja-Starzewski M, Jasiuk I, Wang W, and Schulte J (1994b), "Functionally graded interphases: meso-continuum concept and effective properties," 3rd Int Symp on Structural and Functional Gradient Materials, Ilschner B and Cherradi N (Eds), Lausanne, Switzerland.
157. Ostoja-Starzewski M, Sheng PY, and Jasiuk I (1994c), Influence of random geometry on effective properties and damage formation in 2D composites, ASME J of Eng Mat and Tech, 116, 384-391.
158. Ostoja-Starzewski M, Lee J.-D, and Duxbury PM (1994d) "Effects of random geometry on damage formation and propagation in 2D composites," 31st Annual SES Meeting, College Station, TX, Sept 1994.
159. Ostoja-Starzewski M, Jasiuk I, Wang W, and Alzebdeh K (1995a), Composites with functionally graded interfaces: Meso-continuum concept and effective properties, Acta Metall Mat, to be published.
160. Ostoja-Starzewski M, Alzebdeh K, and Jasiuk I (1995b), Linear elasticity of planar Delaunay networks-III: Self-consistent approximations, Acta Mech, in press.
161. Pedersen OB (1983), Overview No 31, Thermoelasticity and plasticity of composites- 1: Mean field theory, Acta Metall, 31, 1795-1808.
162. Qin S, Fan H, and Mura T (1991), Eigenstrain formulation for classical plates, Int J Solids Struct, 28, 363-372.
163. Qiu YP and Weng GT (1990), Application of Mori-Tanaka's theory involving transversely isotropic spheroidal inclusions, Int J Eng Sci, 28, 1121-1137.
164. Qiu YP and Weng GT (1991), Elastic moduli of thickly coated particles and fiber-reinforced composites, J Appl Mech, 113, 388-398.
165. Qu J (1993), Eshelby tensor for an elastic inclusion with slightly weakened interface, J Appl Mech, 60, 1048-1050.
166. Rhee M, Hirth JP, and Zbib HM (1994), Super dislocation model for the strengthening of metal matrix composites and the initiation and propagation of shear bands, Acta Metall, 42, 2645-2655.
167. Rodin GJ (1993), Overall elastic response of materials containing spherical inhomogeneities, Int J Solids Struct, 30, 1849-1863.
168. Rodin GJ and Hwang YL (1991), Problem of linear elasticity for an infinite region containing a finite number of non-intersecting spherical inhomogeneities, Int J Solids Struct, 27, 145-159.
169. Rose LRF (1986), Kinematical model for stress-induced transformation around cracks, J Am Ceramic Soc, 69, 208-212.
170. Rose LRF and Swain MV, Two R curves partially stabilized zirconia, J Am Ceramic Soc, 69, 203-207.
171. Sangani AS and Lu W (1987), Elastic coefficients of composites containing spherical inclusions in a periodic array, J Mech Phys Solids, 35, 1-21.
172. Santare MH and Keer LM (1986), Interaction between an edge dislocation and a rigid elliptical inclusion, J Appl Mech, 53, 382-385.
173. Sarosiek AM Grujicic M, and Owen WS (1984), Importance of the heterogeneity of the deformation in the ferrite phase of a dual -phase steel, Scripta Metall, 18, 353-356.
174. Schneck R, Rolchlin SI, and Dariel MP (1984), Criterion for predicting the morphology of crystalline cubic precipitates in amorphous solids, Scripta Metall, 18, 989-993.
175. Selvadurai APS and Singh BM (1984), Expansion of a penny-shaped crack by a rigid circular disc inclusion, Int J Fracture, 25, 69-77.
176. Selvadurai APS (1985), Rotational stiffness of a rigid elliptical disc inclusion embedded at bi-material elastic interface, Solid Mech Arch 10, 3-16.
177. Selvadurai APS and Singh MB (1986), Axial displacement of a disc inclusion embedded in a penny-shaped crack, J Appl Math Phys, 37, 64-77.
178. Shibata S, Mori T, and Mura T (1989), Crack arrest by strong short fibers in a brittle composite, ISIJ Int, 11, 954-959.
179. Shibata S, Mori T, and Taya M (1992), Stress relaxation by dislocation punching to radial direction from a long fiber in a composite, Scripta Metall, 26, 363-368.
180. Shibata S, Taya M, Mori T, and Mura T (1991), "Dislocation punching from a spherical inclusion with isotropic eigenstrains," Proc 12th Riso Int Symp on Materials Science, 661-666.
181. 2, Acta Metall, 31, 2087-2093.
182. Sides A, Perl M, and Uzan J (1984), Effect of an inclusion or a hole on an approaching crack in the three-point bend specimen, Eng Fracture Mech, 20, 83-91.
183. Silovanyuk VP and Stadnik MM (1984), Axisymmetric problem for a layer with a system of thin elastic inclusions, Prikl Math Mekh, 48, 590-594.
184. Srolovitz DJ, Petkovic-Luton RA, and Luton MJ (1983), Diffusional relaxation of the dislocation-inclusion repulsion, Phil Mag, A48, 795-809.
185. Srolovitz DJ, Luton MJ, Petkovic-Luton R, Barnett DM, and Nix WD (1984a), Diffusionally modified dislocation-particle interactions, Acta Metall, 32, 1079-1088.
186. Srolovitz DJ, Petkovic-Luton R, and Luton MJ, (1984b), Straight dislocation-spherical inclusion interactions: High and low temperature solutions, Scripta Metall, 18, 1063-1068.
187. Stagni I and Lizzio R, (1984), Shape effects on edge dislocation climb over an elliptical inhomogeneity, Acta Mech, 54, 87-93.
188. Stobbs WM and Paetke S (1985), Bauschinger effect in cold drawn patented wire, Acta Metall, 33, 777-783.
189. Sun CT, Wu JK, and Gibson RF (1985), Prediction of material damping in randomly oriented short fiber polymer matrix composites, J Reinforced Plastic Composites, 4, 262-274.
190. Sun F, Suzuki M, and Nakanishi H (1988), "Relation between fracture mechanics and AE characteristics of model GFRP," Proc 9th Int Acoustic Emission Symp: Japan Socfor NDI, 795-802.
191. Suzuki K, Tanaka R, and Mori T (1985), Suppression of grain boundary sliding by second phase particles. Scripta Metall, 19, 1005-1008.
192. Takao Y and Taya M (1985), Thermal expansion coefficients and thermal stresses in an aligned short fiber composite with application to a short carbon fiber - aluminum, J Appl Mech, 52, 806-810.
193. Tanaka S, Hirashima K, Jedidi A, and Hirose Y (1992), Analytical solution for semi-infinite problems under several boundaries including sliding conditions, J Appl Mech, 58A, 1662-1669.
194. Taya M and Chou TW (1983), "Energy release rates of various microcracks in short-fiber composites," in Mechanics of composite materials: Recent advances, Hashin Z and Herakovich CT (eds), Pergamon, NY, 457-472.
195. 2 during hogh strain-rate deformation, Acta Metall, 33, 2143-2153.
196. Taya M and Mori T (1987), Dislocations punched-out around a short fiber in a short fiber metal matrix composite subjected to uniform temperature change, Acta Metall, 35, 155-162.
197. Taya M and Mori T (1994), Dislocation punching from ceramic/metal interfaces, J Eng Mat Tech, 408, 408-413.
198. Taylor GI (1938), Plastic strain in metals, J Inst Metals, 62, 307-324.
199. Theocaris PS and Demakos CB (1985), Antiplane shear crack in an infinite plate with a circular inclusion, Ing Arch, 55, 295-306.
200. Theocaris PS, Sideridis EP, and Papanicolaou GC (1985), Elastic longitudinal modulus and Poisson's ratio of fiber composites, J Reinforced Plastic Composites, 4, 396-418.
201. Thomson RD and Hancock JW (1984), Local stress and strain fields near a spherical elastic inclusion in a plastically deforming matrix, Int J Fracture, 24, 209-228.
202. Tohgo K and Chou TW (1995), Incremental theory of particulate-reinforced composites including debonding damage, JSME Trans A, 6, 172-178
203. Tohgo K and Weng GJ (1994), Progressive damage mechanics in particle-reinforced metal-matrix composites under high triaxial tension, J Eng Mat Tech, ASME, 116, 414-420.
204. Trantina GG and Barishpolsky M (1984), Elastic-plastic analysis of small defects-voids and inclusions, Eng Fracture Mech, 20, 1-10.
205. Tsai YM (1984), Indentation of a penny-shaped crack by an oblate spheroidal rigid inclusion in a transversely isotropic medium, J Appl Mech, 51, 811-815.
206. Tsuchida E, Mura T and Dundurs J (1986), Elastic field of a elliptic inclusion with a slipping interface, J Appl Mech, 53, 103-107.
207. Tsuchida E, Ohno, and Kouris DA (1991), Effects of an inhomogeneous elliptic insert on the elastic field of an edge dislocation, Appl Phys, A53, 285-291.
208. Tvergaard V (1985), Effect of grain boundary sliding on creep on constrained diffusive cavitation, J Mech Phys Solids, 33, 447-469.
209. Wakashima K, Choi BH, and Mori T (1990), Plastic incompatibility and its accommodation by diffusional flow, Mat Sci Eng, A127, 57-64.
210. 4W around W fibers in a Ni-W directionally solidified eutectic alloy, Acta Metall, 30, 1515-1522.
211. Walpole LJ (1967), Elastic field of an inclusion in an anisotropic medium, Proc R Soc London, A300, 270-288.
212. Walpole LJ (1978), Coated inclusion in an elastic medium, Math Proc Cambridge Phil Soc, 83, 495-506.
213. Walpole LJ (1985a), "Analysis of the overall elastic properties of composite materials," Fundamentals of deformation and fracture (Eshelby Memorial Symposium), Bilby BA, Miller KJ, and Willis JR, Cambridge Univ Press, Cambridge, 91-107.
214. Walpole LJ (1985b), Evaluation of the elastic moduli a transversely isotropic aggregate of cubic crystals, J Mech Phys Solids, 33, 623-636.
215. Wang CY (1994), Conductivity of materials containing fibers of rectangular cross section, Mech Mat, 17, 71-77.
216. Wang ZY, Zhang HT, and Chou YT (1985), Characteristics of the elastic field of a rigid line inhomogeneity, J Appl Mech, 52, 818-822.
217. Warren WE (1983), Edge dislocation inside an elliptic inclusion, Mech Mat, 2, 319-330.
218. Weng GJ (1984), Elastic properties of reinforced solids, with special reference to isotropic ones containing spherical inclusions, Int J Eng Sci, 22, 845-856.
219. Weng GJ (1990), Theoretical connection between Mori-Tanaka's theory and the Hashin-Strikman-Walpole bounds, Int J Eng Sci, 28, 1111-1120.
220. Weng GJ (1992), Explicit evaluation of Willis' bounds with ellipsoidal inclusions, Int J Eng Sci, 30, 83-92.
221. Yang CC, Tsai B, Qin S, Mura T, and Mori T (1990), "Micromechanics of interface: Crack arrest by strong long fibers in a brittle composite," Microcracking Induced Damage in Composite; ASME, 113-120.
222. Yang CC, Mura T, and Shah SP (1991), Micromechanical theory and uniaxial tensile tests of fiber reinforced cement composites, J Mat Res, 6, 2463-2473.
223. Zener C (1948), Elasticity and Anelasticity of Metals, Univ of Chicago Press.
224. Zhang HT and Chou YT (1985), Antiplane eigenstrain problem of an elliptic inclusion in a two-phase anisotropic medium, J Appl Mech, 52, 87-90.
225. Zhao YH, Tandon GP, and Weng GJ (1989), Elastic moduli for a class of porous materials, Acta Mech, 76, 105-130.
226. Zhao YH and Weng GJ (1990), Effective elastic moduli of ribbon-reinforced composites, J Appl Mech, 112, 158-167.
227. Zimmerman RW (1985), Compressibility of an isolated spheroidal cavity in an isotropic elastic medium, J Appl Mech, 52, 606-608.
228. Zhou HS, Cheng HS, and Mura T (1989), Micropitting in rolling and sliding contact under mixed lubrication, J Trib, 111, 605-613.