Potential starter/generator technologies for future aerospace application

IEEE Aerospace and Electronic Systems Magazine

Volumn 11, Issue 10, 1996, Pages 17-24

  Elbuluk, Malik E ^a,c   Kankam, M David ^b  

^a UNIVERSITY OF AKRON   (United States)

^b NASA GLENN RESEARCH CENTER   (United States)

^c The University of Akron   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AEROSPACE APPLICATIONS; ASYNCHRONOUS MACHINERY; ELECTRIC GENERATORS; POWER ELECTRONICS; POWER GENERATION; RELUCTANCE MOTORS; TORQUE; WIND POWER;

POWER DENSITY; STARTER; SWITCHED RELUCTANCE MACHINES; VARIABLE SPEED CONSTANT FREQUENCY; WIND POWER GENERATION;

VARIABLE SPEED DRIVES;

EID: 0030257536     PISSN: 08858985     EISSN: None     Source Type: Journal    
DOI: 10.1109/62.538797     Document Type: Article

References (45)

1. R.E. Quigley, Jr., "More Electric Aircraft," Proceedings of 1993 Applied Power Electronics Conference (APEC'93), pp. 906-911.
2. J.G. Vaidya, "Electrical Machines Technology for Aerospace Power Generators," Proceedings of IECEC 1991, Vol. 1, pp. 7-12.
3. J.D. Bailey, "Factors Influencing the Protection of Small-to-Medium Size Induction Generators," IEEE Trans. On Industry Applications, Vol. 24, No. 5, September/October 1988.
4. A.K. Al Jabri and A.I. Alolah, "Limits on the Performance of the Three-Phase Self Excited Induction Generators," IEEE Trans. On Energy Conversion, Vol. 5, No. 2, June 1990, pp. 350-356.
5. Y.H.A. Rahim, A.L. Mohamadien and A.S. Al Khalaf, "Comparison Between the Steady-State Performance of Self-Excited Reluctance and Induction Generators," IEEE Trans. on Energy Conversion, Vol. 5, No. 3, September 1990, pp. 519-525.
6. T.F. Chan, "Capacitance Requirements of Self-Excited Induction Generators," IEEE Trans. On Energy Conversion, Vol. 8, No. 2, June 1993, pp. 304-311.
7. L. Tang and R. Zavadil, "Shunt Capacitor Failures due to Windfarm Induction Generator Self-Excitation Phenomenon," IEEE Trans. On Energy Conversion, Vol. 8, No. 3, June 1993, pp. 513-519.
8. P.K. Sood and T.A. Lipo, "Power Conversion Distribution System Using a Resonant High Frequency AC Link," IEEE Trans. On Industry Applications, Vol. 24, No. 2, March/April 1988, pp. 586-596.
9. P.K. Sood, T.A. Lipo and I.G. Hansen, "A Versatile Power Conversion for High Frequency Link," IEEE Trans. On Power Electronics, Vol. 3, No. 4, October 1988, pp. 383-390.
10. S.K. Sul and T.A. Lipo, "Field-Oriented Control of an Induction Machine in a High Frequency Link Power System," IEEE Trans. On Power Electronics, Vol. 5, No. 4, October 1990.
11. S.K. Sul and T.A. Lipo, "Design and Performance of a High Frequency Link Induction Motor Drive Operating at Unity Power Factor," Proceedings of IEEE-IAS Annual Meeting, October 1988, pp. 308-313.
12. I. Alan and T.A. Lipo, "Control of a Poly-Phase Induction Generator/Induction Motor Conversion System Completely Isolated from the Utility," IEEE Trans. On Industry Applications, Vol. 30, No. 3, May/June 1994.
13. J.W. Choi and S.K. Sul, "Resonant Link Bidirectional Power Converter: Part I - Resonant Circuit," IEEE Trans. On Power Electronics, Vol. 10, No. 4, July 1995, pp. 479-484.
14. J.W. Choi and S.K. Sul, "Resonant Link Bidirectional Power Converter: Part II - Application to Bidirectional AC Motor Drive Without Electrolytic Capacitor," IEEE Trans. On Power Electronics, Vol. 10, No. 4, July 1995, pp. 485-493.
15. H.L. Nara and B. Dube, "Slip Power Recovery Induction Generators for Large Vertical Axis Wind Turbine," IEEE Trans. On Energy Conversion, Vol. 3, No. 4, December 1988, pp. 733-737.
16. A.K. Wallace and R. Spee, "The Effects of Motor Parameters on the Performance of Brushless DC Drives," IEEE Trans. On Power Electronics, Vol. 5, No. 1, January 1990, pp. 2-8.
17. L. Xu, F. Liang and T.A. Lipo, "Transient Model of a Doubly-Excited Reluctance Motor," IEEE Trans. on Energy Conversion, Vol. 6, No. 1, March 1991, pp. 126-133.
18. R. Li, A. Wallace, R. Spee and Y. Wang, "Two-Axis Model Development of Cage-Rotor Brushless Doubly-Fed Machines," IEEE Trans. On Energy Conversion, Vol. 6, No. 3, September 1991, pp. 453-460.
19. M. Yamamoto and O. Motoyoshi, "Active and Reactive Power Control for Doubly-Fed Wound Rotor Induction Generator," IEEE Trans, on Power Electronics, Vol. 6, No. 4, October 1991, pp. 624-629.
20. K. Shibata and K. Taka, "A Self-Cascaded Induction Generator Combined with a Separately Controlled Inverter and a Synchronous Condenser," IEEE Trans. On Industry Applications, Vol. 28, No. 4, July/August 1992, pp. 797-807.
21. L. Xu, Y. Tang and L. Ye, "Comparison Study of Rotor Structures of Doubly Excited Brushless Reluctance Machine by Finite Element Analysis," IEEE Trans. On Energy Conversion, Vol. 9, No. 1, March 1994, pp. 165-171.
22. C.S. Brune, R. Spee and A.K. Wallace, "Experimental Evaluation of a Variable-Speed, Doubly-Fed Wind-Power Generation System," IEEE Trans. On Industry Applications, Vol. 30, No. 3, May/June 1994, pp. 648-655.
23. L. Xu and L. Ye, "Analysis of a Novel Stator Winding Structure Minimizing Harmonic Current and Torque Ripple for Dual Six-Step Converter-Fed High Power Ac Machines," IEEE Trans. On Industry Applications, Vol. 31, No. 1, January/February 1995, pp. 84-90.
24. R. Li, A. Wallace and R. Spee, "Determination of Converter Control Algorithms for Brushless Doubly-Fed Induction Motor Drives Using Floquet and Lyapunov Techniques," IEEE Trans. On Power Electronics, Vol. 10, No. 1, January 1995, pp. 78-85.
25. L. Xu and W. Cheng, "Torque and Reactive Power Control of a Doubly Fed Induction Machine by Position Sensorless Scheme," IEEE Trans. On Industry Applications, Vol. 31, No. 3, May/June 1995, pp. 636-642.
26. Y. Tang and L. Xu, "A Flexible Active and Reactive Power Control Strategy for a Variable Speed Constant Frequency Generating System," IEEE Trans. On Power Electronics, Vol. 10, No. 4, July 1995, pp. 472-478.
27. S.K. MacMinn and W.D. Jones, "A Very High Speed Switched-Reluctance Starter Generator for Aircraft Engine Applications," Proceedings of NAECON '89, Dayton, Ohio, May 22-26, 1989, pp. 1758-1764.
28. S.R. MacMinn and J.W. Sember, "Control of a Switched-Reluctance Aircraft Engine Starter/Generator Over a Very Wide Speed Range," Proceedings of IECEC, August 6-11, 1989, pp. 631-638.
29. A.V. Radun, "High Power Density Switched Reluctance Motor Drive for Aerospace Applications," IEEE Trans. On Industry Applications, Vol. 28, No. 1, January/February 1992, pp. 113-119.
30. D.E. Cameron and J.H. Lang, "The Control of High-Speed Variable Reluctance Generators in Electric Power Systems," IEEE Trans on Industry Applications, Vol. 29, No. 6, Novenber/December 1993.
31. A. V. Radun, "Generating with the Switched Reluctance Motor, Proc. of the 1994 Applied Power Electronics Conference (APEC '94), February 13-17, 1994, pp. 41-47.
32. A.R. Radun, J.P. Lyons, J. Ruison, P. Sanza and E. Richter, "Engine Starter/Generator System Testing," Aerospace Engineering, July 1994, pp. 23-26.
33. E. Richter, J.P. Lyons, C. Ferreira, A.R. Radun and E. Ruchstadter, "Starter/Generator Preliminary Testing of a 250-kW Reveals Favorable Results," Aerospace Engineering, October 1994, pp. 7-10.
34. R. Cardenas, W.F. Ray and G.M. Asher, "Switched-Reluctance Generators for Wind Energy Applications," Proc. of IEEE 1995 Applied Power Electronics Conference (APEC '95), pp. 559-564.
35. A. Radun and H. Jiang, "400 Hz AC Generator/Cycloconverter Using Switched Reluctance Technology for Aircraft Retrofit/Upgrade Applications," WPAF Contract Report, April 1995.
36. C.A. Ferreira, S.R. Jones, W.S. Heglund and W.D. Jones, "Detailed Design of a 30-kW Switched Reluctance Starter/Generator System for Gas Turbine Engine Application," IEEE Trans. On Industry Applications, Vol. 31, No. 3, May/June 1995, pp. 553-561.
37. T.M. Jahns and M.A. Maldonado, "A New Resonant Link Aircraft Power Generating System," IEEE Trans. On Aerospace and Electronics Systems, Vol. 29, January 1993, pp. 206-214.
38. T.M. Jahns, R.W. DeDoncker, A.V. Radun, P.M. Szczesny and F.G. Turnbull, "System Design Considerations for a High-Power Aerospace Resonant Link Converter," IEEE Trans. On Power Electronics, Vol. 8, No. 4, October 1993, pp. 663-672.
39. C.A. Ferreira, S.R. Jones and W.S. Heglund, "Performance Evaluation of a Switched Reluctance Starter/Generator System under Constant Power and Capacitive Type Loads," IEEE Trans. On Industry Applications," Vol. 31, No. 3, May/June 1995, pp. 553-561.
40. W.S. Heglund, B.T. Drager, S.R. Jones and C.A. Ferreira, "Design and Implementation of a Five-hp, Switched Reluctance, Fuel-Lube, Pump Motor Drive for Gas Turbine Engine," IEEE Trans. on Power Electronics, Vol. 10, No. 1, January 1995, pp. 55-61.
41. S.R. Jones and B.T. Drager, "Performance Evaluation of a High-Speed Switched Reluctance Starter/Generator System using Electronic Position Sensing," Proc. Of the 1995 IEEE IAS Annual Meeting, PP. 249-253.
42. E. Richer and C. Ferreira, "Performance Evaluation of a 250 kW Switched Reluctance Starter Generator," Proc. of the 1995 IEEE IAS Annual Meeting, pp. 434-440.
43. G. Rim and R. Krishnan, "Variable Speed Constant Frequency Power Conversion with a Switched Reluctance Machine," Proc. of IEEE 1994 Applied Power Electronics Conference (APEC '94), pp. 63-71.
44. M. Elbuluk and M.D. Kankam, "Motor Drive Technologies for the Power-By-Wire Program Part I: Motors and Controllers," IEEE Aerospace and Electronics Magazine, November 1995, pp. 37-42.
45. M. Elbuluk and M.D. Kankam, "Motor Drive Technologies for the Power-By-Wire Program Part II: Power Electronic Converters and Devices," IEEE Aerospace and Electronics Magazine, December 1995, pp. 31-36.