A new one-point quadrature, quadrilateral shell element with drilling degrees of freedom

Computer Methods in Applied Mechanics and Engineering

Volumn 136, Issue 1-2, 1996, Pages 165-203

  Zhu, Yongi ^a   Zacharia, Thomas ^b  

^a ANSYS INC   (United States)

^b NONE

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITE STRUCTURES; DEGREES OF FREEDOM (MECHANICS); FINITE ELEMENT METHOD; INTEGRATION; MATHEMATICAL MODELS; PROBLEM SOLVING; STRUCTURAL ANALYSIS;

BELYTSCKO'S SHELL ELEMENTS; FOUR NODE GENERAL SHELL ELEMENT; LOCKING PHENOMENA; NONLINEAR GEOMETRICAL PROBLEMS; NONLINEAR MATERIAL PROBLEMS; PROJECTION SCHEME; SINGLE POINT QUADRATURE; SPACE BEAMS; STRAIN METHOD; WARPING CORRECTION;

SHELLS (STRUCTURES);

EID: 0030246095     PISSN: 00457825     EISSN: None     Source Type: Journal    
DOI: 10.1016/0045-7825(96)01059-6     Document Type: Article

References (55)

1. N. Buechter and E. Ramm, Shell theory versus degeneration - A comparison in large rotation finite element analysis, Int. J. Numer. Methods Engrg. 34 (1992) 39-59.
2. P. Jetteur, Non-linear shell elements based on marguerre theory, IREM Internal Report 85/5, 1985.
3. P. Jetteur and F. Frey, A four node Marguerre element for non-linear shell analysis, Engrg. Comput. (1986) 276-282.
4. S. Jaamei, F. Frey and P. Jetteur, Nonlinear thin shell finite element with six degrees of freedom per node, Comput. Methods Appl. Mech. Engrg. 75 (1989) 251-266.
5. J.C. Simo and D.D. Fox, On a stress resultant geometrically exact shell model - Part I: Formulation and optimal parametrization, Comput. Methods Appl. Mech. Engrg. 72 (1989) 267-304.
6. J.C. Simo, D.D. Fox and M.S. Rifai, On a stress resultant geometrically exact shell model - Part II: The linear theory; Computational aspects, Comput. Methods Appl. Mech. Engrg. 73 (1989) 53-92.
7. J.C. Simo, D.D. Fox and M.S. Rifai, On a stress resultant geometrically exact shell model - Part III: Computational aspects of the nonlinear theory, Comput. Methods Appl. Mech. Engrg. 79 (1990) 21-70.
8. J.C. Simo, D.D. Fox and M.S. Rifai, On a stress resultant geometrically exact shell model - Part IV: Variable thickness shells with through-the-thickness stretching, Comput. Methods Appl. Mech. Engrg. 81 (1990) 91-126.
9. J.C. Simo and J.G. Kennedy, On a stress resultant geometrically exact shell model, Part V: Nonlinear plasticity: formulation and integration algorithms, Comput. Methods Appl. Mech. Engrg. 96 (1992) 133-171.
10. J.C. Simo, M.S. Rifai and D.D. Fox, On a stress resultant geometrically exact shell model, Part VI: Conserving algorithms for non-linear dynamics, Int. J. Numer. Methods Engrg. 34 (1992) 177-164.
11. J. Chroscielewsk, J. Makowski and H. Stumpf, Genuinely resultant shell finite elements accounting for geometric and material non-linearity, Int. J. Numer. Methods Engrg. 35 (1992) 63-94.
12. C. Sansour and H. Bufler, An exact finite rotation shell theory, its mixed variational formulation and its finite element implementation, Int. J. Numer. Methods Engrg. 34 (1992) 73-115.
13. E.N. Dvorkin and K.J. Bathe, A continuum mechanics four-node shell element for general nonlinear analysis, Engrg. Comput. 1 (1984) 77-88.
14. H. Parisch, An investigation of a finite rotation four node assumed strain shell element, Int. J. Numer. Methods Engrg. 31 (1991) 127-150.
15. N. Stander, A. Matzenmiller and E. Ramm, An assessment of assumed strain methods in finite rotation shell analysis, Engrg. Comput. 6 (1989) 58-66.
16. T. Belytschko, J.I. Lin and C.S. Tsay, Explicit algorithms for the nonlinear dynamics and shells, Comput. Methods Appl. Mech. Engrg. 42 (1984) 225-251.
17. B.E. Engelmann and R.G. Whirley, A new elastoplastic shell element formulation for DYNA3D, Lawrence Livermore National Laboratory, Report UCRL-JC-104826, 1990.
18. W.K. Liu, E.S. Law, D. Lam and T. Belytschko, Resultant-stress degenerated-shell element, Comput. Methods Appl. Mech. Engrg. 55 (1986) 259-300.
19. T. Belytschko, B.L. Wong and H.Y. Chiang, Advances in one-point quadrature shell elements, Comput. Methods Appl. Mech. Engrg. 96 (1992) 93-107.
20. T. Belytschko and I. Leviathan, Physical stabilization of 4-node shell element with one-point quadrature, Comput. Methods Appl. Engrg. 113 (1994) 321-350.
21. T. Belytschko and I. Leviathan, Projection schemes for one-point quadrature shell elements, Comput. Methods Appl. Mech. Engrg. 115 (1994) 277-286.
22. T.J.R. Hughes and W.K. Liu, Nonlinear finite element analysis of shells: Part I, Three-dimensional shells, Comput. Methods Appl. Mech. Engrg. 26 (1981) 331-362.
23. T.J.R. Hughes and E. Carnoy, Nonlinear finite element shell formulation accounting for large membrane strains, Comput. Methods Appl. Mech. Engrg. 39 (1983) 69-82.
24. T. Belytschko, B.L. Wong and H. Stolarski, Assumed strain stabilization procedure for the 9-node lagrange shell element, Int. J. Numer. Engrg. 28 (1989) 385-414.
25. A.F. Saleeb, T.Y. Chang and W. Graf, A quadrilateral shell element using a mixed formulation, Comput. Struct. 26 (1987) 787-803.
26. A.F. Saleeb, T.Y. Chang, W. Graf and S.Y.Y. Yong, A hybrid/mixed model for non-linear shell analysis and its application to large-rotation problems, Int. J. Numer. Methods Engrg. 29 (1990) 407-446.
27. D.W. White and J.F. Abel, Accurate and efficient nonlinear formulation of a nine-node shell element with spurious model control, Comput. Struct. 35 (1990) 621-641.
28. K.S. Surana, Geometrically nonlinear formulation for the curved shell elements, Int. J. Numer. Methods Engrg. 19 (1983) 581-615.
29. R.D. Cook, Four-node 'flat' shell element: Drilling degrees of freedom, membrane-bending coupled, warped geometry and behavior, Comput. Struct. 50 (1994) 549-555.
30. B.P. Naganarayana and Prathap, Force and moment corrections for the warped four-node quadrilateral plane shell element, Comput. Struct. 33 (1989) 1107-1115.
31. T. Belytschko and R. Mullen, WHAMS: a program for transient analysis of structures and continue, in: N. Perrone and W. Pilkey, eds., Structural Mechanics Software Series II (University Press of Virginia, 1987) 151-212.
32. J.O. Hallquist, LS-DYNA3D Theoretical manual, 1993.
33. S.W. Attaway, Update of PRONTO 2D and PRONTO 3D transient solid dynamics program, SAND90-0102, Sandia National Laboratories, Albuquerque, New Mexico, 1990.
34. M.E. Botkin, N.L. Johnson, J.O. Hallquist, L.C.L. Lum and A. Matzenmiller, Numerical simulation of post-failure dynamic crashing of composite tubes, Processing of 2nd Int. LS-DYNA3D Conf., San Francisco, 1994.
35. A. Matzenmiller and K. Schweizerhof, Crashingworthiness simulations of composite structures - A first step explicit time integration, in: P. Wriggers and W. Wagner, eds., Nonlinear Computational Mechanics - A State of the Art, to be published.
36. P.C. Galbraith and J.O. Halquist, Shell element formulations in LS-DYNA3D: Their use in modelling sheet metal forming, Processing of Numisheet '93 Conf., Japan, 1993.
37. C.C. Rankin and B. Nour-Omid, The use of projectors to improve finite element performance, Comput. Struct. 30 (1988) 257-267.
38. T.J.R. Hughes and F. Brezzi, On drilling degrees of freedom, Comput. Methods Appl. Mech. Engrg. 72 (1989) 105-121.
39. D.J. Allman, A compatible triangular element including vertex rotations for plane elasticity analysis, Comput. Struct. 19 (1984) 1-8.
40. D.J. Allman, A quadrilateral finite element including vertex rotations for plane elasticity problems, Int. J. Numer. Methods Engrg. 26 (1988) 717-739.
41. A. Ibrahimbegovic, R.L. Taylor and E.L. Wilson, A robust quadrilateral membrane finite element with drilling degrees of freedom, Int. J. Numer. Methods Engrg. 30 (1990) 445-457.
42. A. Ibrahimbegovic and F. Frey, Geometrically non-linear method of incompatible modes in application to finite elasticity with independent rotations, Int. J. Numer. Methods Engrg. 36 (1993) 4185-4200.
43. A. Ibrahimbegovic, Mixed finite element with drilling rotations for plane problems in finite elasticity, Comput. Methods Appl. Mech. Engrg. 107 (1993) 225-238.
44. Y.Y. Zhu, Contribution to the local approach of fracture in solid dynamics, Ph.D. Thesis, University of Liege, Belgium, 1992.
45. D. Cook, On the Allman triangle and a related quadrilateral element, Comput. Struct. 22 (1986) 1065-1067.
46. R.H. Macneal and R.L. Harder, A refined four-node membrane element with rotational degrees of freedom, Comput. Struct. 28 (1988) 75-84.
47. M. Iura and S.N. Atluri, Formulation of a membrane finite element with drilling degrees of freedom, Comput. Mech. 9 (1992) 417-428.
48. T. Belytschko and L.P. Bindeman, Assumed strain stabilization of the 4-node quadrilateral with 1-point quadrature for nonlinear problems, Comput. Methods Appl. Mech. Engrg. 88 (1991) 311-340.
49. R.H. Macneal and R.L. Harder, A proposed standard set of problems to test finite element accuracy, Finite Elements Anal. Des. 1 (1985) 3-20.
50. L. Morino, J.W. Leech and E.A. Witmer, An improved numerical calculation technique for large elastic-plastic transient deformations of thin shells: Part 2 - Evaluation and applications, J. Appl. Mech. 38 (1971) 429-436.
51. K.P. Li, A.M. Habraken and H. Bruneel, Simulation of square cup deep drawing with different finite elements, Proc. Numisheet '93, Conf., Japan, 1993.
52. E. Onate et al., Numistamp: A research project for assessment of finite element models for stamping processes, Proc. Numisheet '93, Conf., Japan, 1993.
53. L. Taylor et al., Numical simulation of sheet metal forming, Proc. Numisheet '93, Conf., Japan, 1993.
54. A. Ibrahimbegovic, Stress resultant geometrically nonlinear shell theory with drilling rotations - Part I. A consistent formulation, Comput. Methods Appl. Mech. Engrg. 118 (1994) 265-284.
55. A. Ibrahimbegovic and F. Frey, Stress resultant geometrically nonlinear shell theory with drilling rotations - Part II. Computation aspects, Comput. Methods Appl. Mech. Engrg. 118 (1994) 285-308.