Phase transformations in condensed systems revisited: Industrial applications

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 27, Issue 9, 1996, Pages 2397-2418

  Fine, Morris E ^a,b,c  

^a NORTHWESTERN UNIVERSITY   (United States)

^b Faculty of the Graduate School

^c NATIONAL ACADEMY OF ENGINEERING   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AGE HARDENING ALLOYS; CONDENSED SYSTEMS;

AGE HARDENING; ALLOYS; INDUSTRIAL APPLICATIONS; MICROSTRUCTURE; SOLUBILITY;

PHASE TRANSITIONS;

EID: 0030244945     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02652334     Document Type: Article

References (128)

1. A. Wilm: Metallurgie, 1911, vol. 8, p. 225.
2. P.D. Merica, R.G. Waltenberg, and H. Scott: Sci. Pap. U.S. Bur. Stds., 1919, p. 347.
3. R.F. Mehl: Precipitation from Solid Solutions, A. Doughton, Coordinator, ASM, Cleveland, OH, 1959.
4. R.F. Mehl: Trans. AIME, 1936, vol. 122, pp. 11-56.
5. A. Smegelskas and E. Kirkendall: Trans. AIME, 1947, vol. 171, pp. 130-42.
6. G. Tammann: The States of Aggregation, translated by D.F. Van Nostrand Co., New York, NY, 1925.
7. R.F. Mehl and L.K. Jetter: ASM Symp. Age Hardening of Metals, ASM, Metals Park, OH, 1940, p. 342.
8. N.F. Molt and F.R.N. Nabarro: Proc. Phys. Soc. London, 1940, vol. 52, pp. 85-9.
9. A. Guinier: Compt. Rend., 1938, vol. 206, p. 1641;
10. Nature, 1938, vol. 142, pp. 569-70.
11. G.D. Preston: Proc. R. Soc., 1938, vol. A167, p. 534;
12. Nature, 1938, vol. 142, p. 526-38.
13. V. Gerold: Z. Metallkd., 1954, vol. 45, pp. 595 and 599.
14. S.D. Stookey: Method of Making Ceramics and Product Thereof, U.S. Patent 2,920,971. Jan. 12, 1960.
15. R.F. Mehl: Rev. Metall., 1964, Feb.
16. F.W. Gayle and M. Goodway: Science, 1994, vol. 266, p. 1015.
17. M.J. Pfeiffer and P.W. Voorhees: Metall. Trans. A, 1991, vol. 22A, pp. 1921-35.
18. A.J. Ardell and A. Maheshwari: Acta Metall. Mater., 1995, vol. 43, pp. 1825-35.
19. W.O. Gentry and M.E. Fine: Acta Metall., 1972, vol. 20, pp. 181-90.
20. J.G. Byrne, M.E. Fine, and A. Kelly: Phil. Mag., 1961, Ser. 8, vol. 6, pp. 1119-45.
21. R. Raj: TMS Technical Program, Fall Meeting, Cleveland, OH, Oct. 29-Nov. 2, 1995, TMS, Warrendale, PA, 1996, p. 51.
22. J.S. Santner: Ph.D. Thesis, Northwestern University, Evanston, IL, 1975.
23. M.E. Fine and S.P. Bhat: Proc. 4lh Riso Int. Symp. on Metallurgy and Materials Science, Roskilde, Denmark, 1983, pp. 251-6.
24. P.N. Thielen, R.A. Fournelle, and M.E. Fine: Acta Metall, 1976, vol. 24, pp. 1-10.
25. R.A. Fournelle, E.A. Grey, and M.E. Fine: Metall. Trans. A, 1976, vol. 7A, pp. 669-82.
26. S. Ikeda, T. Sakat, and M.E. Fine: J. Mater. Sci., 1977, vol. 12, pp. 675-83.
27. A.R.C. Westwood: Metall. Trans. A, 1988, vol. 19A, pp. 749-58.
28. J.M. Brupbacher, L. Christodoulou, and D.C. Nagle: Process for Forming Metal Ceramic Composites, U.S. Patent No. 4,710,348, 1987.
29. N.C. Beck Tan, R.M. Aiken, Jr., and R.M. Briber: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2461-68.
30. R. Mitra, W.A. Chiou, M.E. Fine, and J.R. Weertman: J. Mater. Res., 1993, vol. 8, pp. 2380-92.
31. S.K. Lahiri, D. Chandra, L.H. Schwartz, and M.E. Fine: Trans. TMSAIME, 1969, vol. 245, pp. 1865-8.
32. R.W. Thompson: Effect of Ti Additions on Hi-Steel and Tri-Steel, Research Report, Inland Steel Co., East Chicago, IN, Nov. 1969.
33. A.P. Coldren and T.B. Cox: Technical Report No. DTNSRDCN00167-85-C-006, David Taylor Research Laboratory, Annapolis, MD, 1985.
34. E.J. Czyrcka, R.E. Link, J. Wong, D.A. Aylor, T.W. Montemarano, and J.P. Gudas: Naval Eng. J., 1990, vol. 63.
35. M.E. Fine, R. Ramanathan, S. Vaynman, and S.P. Bhat: Proc. Int. Symp. on Low Carbon Steels for the 90's, Pittsburgh, PA, Oct. 1821, 1993, R. Asfahani and G. Tither, eds., TMS, Warrendale, PA, 1994, pp. 511-14.
36. M.R. Krishnadev, W.L. Zhang, A. Gendron, V. Vaidy, R. Rene, and J.T. Bowker: High Performance Structural Steels, 1995 Conf. Proc., ASM International Materials Week 95, Cleveland, OH, Oct. 30-Nov. 1, 1995, R. Asfahani, ed., ASM INTERNATIONAL, Materials Park, OH, 1996.
37. S. Vaynman and M.E. Fine: Unfunded Proposal to American Welding Society, Northwestern University, Evanston, IL.
38. A.G. Khachaturyan, S.M. Shapiro, and S. Semenovskaya: Phys. Rev. B, 1991, vol. 43, pp. 10832-43.
39. B.D. Butler and J.B. Cohen. Metall. Trans. A, 1992, vol. 23A, pp. 1617-26.
40. B.D. Butler and J.B. Cohen: Acta Metall. Maler., 1993, vol. 41, pp. 41-8.
41. J.B. Cohen: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2565-68.
42. J.B. Cohen: Metall. Mater. Trans. A, 1992, vol. 23A, pp. 2685-97.
43. P. Fratzi, Y. Yoshida, G. Vogland, and H.G. Haubold: Phys. Rev. B, 1992, vol. 46, pp. 11323-31.
44. M.K. Chen and P.W. Voorhees: Modelling Simul. Mater. Sci. Eng., 1993, vol. 1, pp. 591-612.
45. C. Wagner: Z Electrochem., 1961, vol. 65, pp. 581-91.
46. M.E. Glicksman, R.N. Smith, C. Paradies, and P. Rao: TMS Fall Meeting Conference Program Booklet, Cleveland, OH, Oct. 31, 1995, p. 50.
47. M.C. Flemings: Solidification Processing, McGraw-Hill Book Co., New York, NY, 1974, p. 295.
48. James G. Conley: Northwestern University, Evanston, IL, 1995, private communication.
49. B.J. Mahoney and R.I. Stephens: Fatigue and Fracture Toughness of A356-T6 Cast Aluminum Alloy/SAE SP-760, R.I. Stephens, ed., TMS, Warrendale, PA, 1988, p. 71.
50. G. Salas B, J. Ramirez V, M.E. Noguez A, and T. Robert N: Scripta Metall. Mater., 1995, vol. 32, pp. 295-99.
51. U. Feuer and R. Wunderlein: DGM, Fachber, 1977, p. 38.
52. D.H. Kirkwood: Mater. Sci. Eng., 1985, vol. LI, p. 73.
53. D.D. Double and A. Hellawell: Acta Metal. Mater., 1995, vol. 43, pp. 2435-42.
54. S.-Z. Lu and A. Hellawell: J. Mater., February 1995, p. 38.
55. S. Tsunekawa and M.E. Fine: Scripta Metall, 1982, vol. 16, pp. 391-92.
56. P.A. Earvolino, M.E. Fine, J.R. Weertman, and V.R. Parameswaran: Scripta Metall., 1992, vol. 26, pp. 945-48.
57. S. Zhang, J.P. Nie, and D.E. Mikkola: Scripta Metall., 1990, vol. 24, pp. 57-62.
58. K.S. Kumar and J.R. Pickens: Scripta Metall., 1988, vol. 22, pp. 1015-18.
59. J.P. Nie, S. Zhang, and D.E. Mikkola: Scripta Metall, 1990, vol. 24, pp. 1099-1104.
60. R. Raj: TMS Fall Meeting Conference Program Booklet, Cleveland, OH, Oct. 31, 1995, p. 51.
61. James G. Conley: Northwestern University, Evanston, IL, 1995, private communication.
62. T. Creasy, J.R. Weertman, and M.E. Fine: Dispersion Strengthened Aluminum Alloys, Y.W. Kim and W.M. Griffith, eds., TMS, Warrendale, PA, 1988, pp. 539-49.
63. G.J. Merchant and S.H. Davis: Acta Metall. Mater., 1990, vol. 38, pp. 2683-93.
64. D.A. Huntley and S.H. Davis: Acta Metall. Mater., 1993, vol. 41, pp. 2025-43.
65. W. Kurz and R. Trivedi: Acta Metall. Mater., 1990, vol. 38, pp. 1-17.
66. L. Ratke and S. Diefenbach: Mater. Sci. Eng., 1995, vol. R15, p. 263.
67. T. Berenberg, I. Steinbach, M. Rammerskirchen, and R. Mergen: Proc. Winter ASME Annual Meeting, Atlanta, GA, 1991, ASME, Fairfield, NJ, 1991, vol. HTD-75, p. 103.
68. M.E. Fine: Bell Laboratories Record, 1952; vol. 30, pp. 345-48.
69. G.S. Huppi: ARMCO Research and Technology, Middletown, OH, 1995, private communication.
70. Y. Soga, Y. Yushigami, H. Honma, and N. Takahashi: Ultrahigh Silicon, Grain-Oriented Electrical Sheet Steel and Process for Producing the Same, U.S. Patent No. 5,308,411, May 3, 1994.
71. H. Yashiki and T. Kaneko: Oriented Silicon Steel Sheets and Production Process Therefor, U.S. Patent No. 5,250,123, Oct. 5, 1993.
72. H. Yashiki, T. Kaneko, and T. Tanaka: Oriented Magnetic Steel Sheets and Manufacturing Process Therefor, U.S. Patent No. 5,425,820, June 20, 1995.
73. J.K. Stanley: Electrical and Magnetic Properties of Metals, ASM, Metals Park, OH, 1963, p. 52.
74. C. Kittel: Introduction to Solid State Physics, 2nd ed., John Wiley and Sons, New York, NY, 1956, pp. 335 and 336.
75. D.W. Dietrich: Metals Handbook/ASM International, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 2, p. 761.
76. J.K.L. Lai and S. Yuanzxi: Scripta Metall. Mater., 1995, vol. 33, pp. 421-26.
77. W.C. Ellis and E.S. Greiner: Trans. ASM, 1941, vol. 29, p. 415.
78. J.H. White and C.V. Wahl: U.S. Patent No. 1,862,559, applied for Aug. 14, 1931.
79. J. Miyake, G. Ghosh, and M.E. Fine: Bulletin Materials Research Society, vol. 21, no. 6, 1996, pp. 13-18.
80. Y.A. Chang, J.P. Neumann, A. Mikula, and D. Goldberg: Phase Diagrams and Thermodynamic Properties of Ternary Copper Metal Systems, International Copper Research Association, 1979, pp. 475 and 483.
81. Y. Sakai, K. Inoue, and H. Maeda: Acta Metall. Mater., 1995, vol. 43, pp. 1517-22.
82. Metals Handbook, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 2, p. 283.
83. H.L. Marcus, Z. Eliezer, and M.E. Fine: A Method of Making Copper-Titanium Nitride Alloy, U.S. Patent No. 5,338,374, Aug. 16, 1994.
84. S. Hanai, N. Takemoto, Y. Tokunaga, and Y. Mizuyama: Trans Iron Steel Inst. Jpn., 1984, vol. 24, p. 17.
85. G.T. Hahn: Acta Metall., 1962, vol. 10, pp. 727-38.
86. G.E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw-Hill, New York, NY, 1976, pp. 204-10.
87. A. Okamoto, Y. Hiyashi, M. Takashi, and S. Sugisawa: SAE Technical Paper No. 820018, 1982.
88. L.S. Darken and R.W. Gurry: Physical Chemistry of Metals, McGraw-Hill, New York, NY, 1953, p. 463. (Note: R.F. Mehl was consulting editor of McGraw-Hill's series on Metallurgy and Metallurgical Engineering.)
89. R.P. Foley, D.K. Matlock, and G. Krauss: Survey of Ongoing Approaches to Development of High Strength Steels, Report to International Lead Zinc Research Organization Inc., Nov. 15, 1995.
90. B. Hutchinson: Mater. Sci. Forum, 1994, vols. 157-162, p. 1917.
91. T. Fujita et al.: Int. Congr. and Exp., Feb. 27-Mar. 2, 1995, p. 41.
92. H.H. Herman: Metall. Trans., 1971, vol. 2, pp. 13-22.
93. I.J. Polmear: Trans. TMS-AIME, 1964, vol. 230, p. 1331.
94. S.P. Ringer, B.C. Muddle, and I.J. Polmear: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1659-71.
95. H.H. Herman and M.E. Fine: Trans. TMS-AIME, 1964, vol. 224, pp. 503-05.
96. H. Mavoori, S. Vaynman, J. Chin, B. Moran, L. Keer, and M. Fine: Mater. Res. Soc. Symp., 1995, vol. 390, pp. 161-75.
97. H.L. Davidson, N.J. Colella, J.A. Kerns, and D. Makowiecki: Proc. 45th IEEE Electronics Components and Technology Conf, IEEE, Piscataway, NJ, 1995, p. 538.
98. E. Anders, R.S. Lewis, T. Ming, and E. Zinner: Interstellar Dust, L.J. Allamandola and A.G.G.M. Tielens, eds., IAU, 1989, p. 389.
99. C.V. Cooper and M.E. Fine: Scripta Metall, 1984, vol. 18, pp. 59396.
100. M.E. Fine and D.L. Davidson: ASTM STP 811, ASTM, Philadelphia, PA, 1983, p. 350.
101. Y.-H. Pao, S. Badgeley, E. Jih, and R. Govila: Trans. ASME J. Electronic Packaging, 1993, vol. 115, p. 147.
102. S. Vaynman, H. Mavoori, and M.E. Fine: Advances in Electronic Packaging 1995/Proc. INTERpack '95 T.R. Hsu, A. Barcohen, and W. Nakayama, eds., ASME, New York, NY, 1995, vol. 2, pp. 65762.
103. S. Vaynman, D.A. Jeannotte, and M.E. Fine: Metall. Trans. A, 1988, vol. 19A, pp. 1051-59.
104. E.C. Cutiongco, S. Vaynman, D.A. Jeannotte, and M.E. Fine: Trans. ASME, J. Electronic Packaging, 1990, vol. 112, pp. 110-14.
105. A. Zubelewicz: J. Mech. Phys. Solids, 1993, vol. 41, pp. 1711-22.
106. A. Manthiram, A. Dananjay, and C. Tsang: Ceramic Transactions: Role of Ceramics in Electrochemical Devices, P.M. Kumta et al., eds., American Ceramic Society, Westerville, OH, in press.
107. Y. Nishi, H. Azuma, and A. Omara: Non-Aqueous Electrolytic Cell, U.S. Patent No. 4,959,281, Sony Corporation, Tokyo, Sept. 25,1990.
108. For example, J.B. Goodenough, A. Manthiram, and B. Wnetrzewski: J. Power Sources, 1993, vols. 43-44, p. 269.
109. R. Dagani: Chem. Eng. News, Jan. 4, 1993, pp. 34-35.
110. S. Megahed and B. Scrrosati: The Electrochemical Society Interface, 1995, Winter, p. 34.
111. J.V. Tompkins, R. Laabi, B.R. Birmingham, and H.L. Marcus: Solid Free Form Fabrication Proceedings, University of Texas at Austin, Austin, TX, H.L. Marcus, J.J. Beeman, J.W. Barlow, D.L. Bourell, and B.H. Crawford, eds., Sept. 1994, pp. 412-21.
112. G. Zong, Y. Jaquot, W.R. Thissell, and H.L. Marcus: Plasma and Laser Processing of Materials, K. Upadhya, ed., TMS, Warrendale, PA, 1991, p. 23.
113. W.R. Thissell and H.L. Marcus: Solid Free-Form Fabrication Proceedings, H.L. Marcus, J.J. Beeman, J.W. Barlow, D.L. Bourell, and B.H. Crawford, eds., 1994, pp. 311-20.
114. D. Bunnell, D. Bourell, and H. Marcus: Proc. Solid Free Form Fabrication Symp., University of Texas at Austin, Austin, TX, Aug. 8-10, 1994, H.L. Marcus, J.J. Beeman, J.W. Barlow, D.L. Bourell, and B.H. Crawford, eds., pp. 379-86.
115. S.-K. Joo, S.-W. Lee, and T.-H. Ihn: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1575-78.
116. V. Laurent: Ph.D. Thesis, Institut National Polytechnique de Grenoble, Grenoble, France, 1988 (see Ref. 4).
117. L. Espie, B. Drevet, and N. Eustathopoulos: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 599-605.
118. N. Eustathopoulos and A. Mortenson: Fundamentals of Metal Matrix Composites, S. Suresh, A. Mortensen, and A. Needleman, eds., Butterworth-Heinemann, Stoneham, MA, 1993.
119. S. Vaynman, M. Loomans, and M.E. Fine: Northwestern University, Evanston, IL, unpublished research.
120. I. Prigogine: Thermodynamics of Irreversible Processes, Wiley-Interscience, New York, NY, 1955.
121. T. de Donder: L'Affinite, Paris, 1936.
122. K.-N. Tu: University of California at Los Angeles, Los Angeles, CA, 1995, private communication.
123. N. Eusathopoulos and L. Coudrier: J Adhesion Sci. Technol., 1992, vol. 6, pp. 1011-22.
124. U. Gangopadhyay and P. Wynblatt: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 607-15.
125. M.C. Flemings: Solidification Processing, McGraw-Hill Book Co., New York, NY, 1974, pp. 221-22.
126. P.R. Bridenbough: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1021-24.
127. P.R. Bridenbough: Harvard Business School Conference, Harvard University, Cambridge, MA, Feb. 10, 1993.
128. Report of Jan. 12, 1995, Workshop, Advanced Materials Processing Program of the National Science Foundation, Washington, D.C.