Fluid-to-particle convective heat transfer coefficient as evaluated in an aseptic processing holding tube simulator

Journal of Food Process Engineering

Volumn 19, Issue 3, 1996, Pages 241-267

  Awuah, G B ^a   Ramaswamy, H S ^a   Simpson, B K ^a   Smith, J P ^a  

^a MCGILL UNIVERSITY   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

CALIBRATION; COOLING; FABRICATION; FLOW OF FLUIDS; FOOD PROCESSING; HEAT CONVECTION; HEATING; MATHEMATICAL MODELS; PARTICLE SIZE ANALYSIS; POLYTETRAFLUOROETHYLENES; SIMULATORS; STERILIZATION (CLEANING);

ASEPTIC PROCESSING HOLDING TUBE SIMULATOR; BIOT NUMBERS; HIGH TEMPERATURE SHORT TIME STERILIZATION; POTATO;

HEAT TRANSFER COEFFICIENTS;

EID: 0030244244     PISSN: 01458876     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1745-4530.1996.tb00392.x     Document Type: Article

References (39)

1. ABDELRAHIM, K.A. and RAMASWAMY, H.S. 1995. High temperature/pressure rheology of carboxymethylcellulose (CMC). Food Res. Intl. 28, 285-290.
2. ALHAMDAN, A., SASTRY, S.K. and BLAISDELL, J.L. 1990. Natural convection heat transfer between water and an irregular-shaped particle. Trans. ASAE 33(2), 620.
3. ASTROM, A. and BARK, G. 1994. Heat transfer between fluid particles in aseptic processing. J. Food Eng. 21, 97-125.
4. AWUAH, G.B., RAMASWAMY, H.S. and SIMPSON, B.K. 1993. Surface heat transfer coefficients associated with heating food particles in CMC solutions. J. Food Process Engineering 16, 39-57.
5. AWUAH, G.B., RAMASWAMY, H.S. and SIMPSON, B.K. 1995. Comparison of two methods for evaluating fluid-to-surface heat transfer coefficient. Food Res. Intl. 28, 261-271.
6. BALASUBRAMANIAM, V.M. and SASTRY, S.K. 1994a. Liquid-to-particle heat transfer coefficient in non-Newtonian carrier medium during continuous tube flow J. Food Eng. 23, 169-187.
7. BALASUBRAMANIAM, V.M. and SASTRY, S.K. 1994b. Convective heat transfer at particle-liquid interface in continuous tube flow at elevated temperatures. J. Food Sci. 59, 675-681.
8. CACACE, D., PALMIERI, L., PIRONE, G., MASI, P. and CAVELLA. 1994. Biological validation of mathematical modeling of thermal processing of particulate foods: the influence of heat transfer coefficient determination. J. Food Eng. 23, 51:68.
9. CHANDARANA, D.I. and GAVIN, A. III. 1989. Establishing thermal processes for heterogenous foods to be processed aseptically: a theoretical comparison of process development methods. J. Food Sci. 54, 198-204.
10. CHANDARANA, D.I., GAVIN, A. III. and WHEATON, F.W. 1988. Particle/fluid interface heat transfer during aseptic processing of foods. ASAE Paper No. 88-6599. American Society of Agricultural Engineers, St. Joseph, MI.
11. CHANDARANA, D.I., GAVIN, A. III. and WHEATON, F.W. 1990. Particle/fluid interface heat transfer under UHT conditions at low particle/fluid relative velocities. J . Food Process Engineering 13, 191-206.
12. CHANG, S.K. and TOLEDO, R.T. 1989. Heat and simulated sterilization of particulate solids in a continuously flowing system. J. Food Sci. 54, 1017-1023, 1030.
13. CLARK, P.J. 1978. Mathematical modelling in sterilization processes. Food Technol. 32(3), 73-75.
14. DIGNAN, D.M., BERRY, R., PFLUG, I.J. and GARDINE, T.D. 1989. Safety considerations in establishing aseptic processes for low-acid foods containing particulates. Food Technol. 43(3), 118-121.
15. DUTTA, B. and SASTRY, S.K. 1990. Velocity distribution of food particle suspensions in holding tube flow: distribution characteristics of and fastest-particle velocities. J. Food Sci. 55, 1703-1710.
16. HASSAN, B.H. 1984. Heat Transfer Coefficients for Particles in Axially Rotating Cans. Ph.D thesis. Dept. of Agricultural Engineering. Univ. of California, Davis, CA.
17. HELDMAN, D.R. 1989. Establishing aseptic thermal processes for low-acid foods containing particulates. Food Technol. 43(3), 122-123.
18. HELDMAN, D.R. and Singh, R.P. 1981. Food Process Engineering. Van Nostrand Reinhold/AVI, New York.
19. HEPPELL, N.J. 1985. Measurement of liquid-solid heat transfer coefficient during continuous sterilization of liquids containing solids. Paper presented at the 4th Int. Conference on Engineering and Food, July 7-10. Edmonton, AB, Canada.
20. HUNTER, G.M. 1972. Continuous sterilization of liquid media containing suspended particles. Food Technol. in Australia, 24, 158-165.
21. LARKIN, J.W. 1989. Use of a modified Ball's formula method to evaluate aseptic processing of foods containing particulates. Food Technol. 43(3), 124-131.
22. LARKIN, J.W. 1990. Mathematical analysis of critical parameters in aseptic particulate processing systems. J. Food Process Engineering 13, 155-167.
23. LEE, J.H., SINGH, R.K. and LARKIN, J.W. 1990. Determination of lethality and processing time in a continuous sterilization system containing particulates. J. Food Eng. 11, 67-92.
24. MAESMANS, G., HENDRICKX, M., DECORDT, S., FRANSIS, A. and TOBBACK, P. 1992. Fluid-to-particle heat transfer coefficient determination of heterogeneous foods: A review. J. Food Processing and Preserv. 16, 29-69.
25. MWANGI, J.M., RIZVI, S.S.H. and DATTA, A.K. 1993. Heat transfer to particles in shear flow: application in aseptic processing. J. Food Eng. 19, 55-74.
26. RAMASWAMY, H.S., LO, K.V. and TUNG, M.A. 1982. Simplified equations for transient temperatures in conductive foods with convective heat transfer at the surface. J. Food Sci. 47, 2042-2047, 2065.
27. RAMASWAMY, H.S., TUNG, M.A. and STARK, R. 1983. A method to measure surface heat transfer from steam/air mixtures in batch retorts. J. Food Sci. 48, 900-904.
28. SASTRY, S.K. 1986. Mathematical evaluation of process schedules for aseptic processing of low-acid foods containing discrete particulate matter. J. Food Sci. 51, 1323-1328, 1332.
29. SASTRY, S.K. 1992. Modelling the continuous sterilization of particulate foods. In Mathematical Modelling of Food Processing Operations. (S. Thorne, ed.) pp. 233-270, Elsevier Applied Science. New York.
30. SASTRY, S.K., HESKITT, B.F. and BLAISDELL, J.L. 1989. Convective heat transfer at particle liquid interface in aseptic processing systems. Food Technol. 43(3), 132, 136, 143.
31. SASTRY, S.K., LIMA, M., BRIM, J., BRUNN, T. and HESKITT, B.F. 1990. Liquid-to-particle heat transfer during continuous tube flow: influence of flow rate and particle to tube diameter ratio. J. Food Process Engineering 13, 239-253.
32. SCHULTZ, O.T. and OLSON, F.C.W. 1940. Thermal processing of foods in tin containers. III. Recent improvements in the general method of thermal process calculations - a special coordinate paper and methods of converting initial and retort temperatures. Food Res. 5, 399.
33. SKELLAND, A.H.P. 1967. Non-Newtonian Flow and Heat Transfer. John Wiley & Sons, New York.
34. SKJOLDEBRAND, C. and OHLSSON, T. 1993. A computer simulation program for evaluation of the continuous heat treatment of particulate food products. Part 1: Design. J. Food Eng. 20, 149-165.
35. STEEL, R.G.D and TORRIE, J.H. 1960. Principles and Procedures of Statistics. McGraw Hill, New York.
36. STOFOROS, N.G. 1988. Heat Transfer in Axially Rotating Canned Liquid/Particulate Food Systems. Ph.D thesis. Dept. of Agricultural Engineering. Univ. of California, Davis, CA.
37. ZITOUN, K.B. and SASTRY, S.K. 1994a. Determination of convective heat transfer between fluid and cubic particles in continuous tube flow using noninvasive experimental techniques. J. Food Process Engineering 17, 209-228.
38. ZITOUN, K.B. and SASTRY, S.K. 1994b. Convective heat transfer coefficients for cubic particles in continuous tube flow using the moving thermocouple method. J. Food Process Engineering 17, 229-241.
39. ZURITZ, C.A., MCCOY, S.C. and SASTRY, S.K. 1990. Convective heat transfer coefficients for irregular particles immersed in non-Newtonian fluids during tube flow. J. Food Eng. 11, 159-179.