TEM observations of fatigue damage accumulation at the surface of the near-α titanium alloy IMI 834

Acta Materialia

Volumn 44, Issue 9, 1996, Pages 3453-3463

  Baxter, G J ^a   Rainforth, W M ^a   Grabowski, L ^b  

^a UNIVERSITY OF SHEFFIELD   (United Kingdom)

^b ROLLS ROYCE PLC   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

CHARACTERIZATION; COMPOSITION; CRACK INITIATION; CRACKS; DENSITY (SPECIFIC GRAVITY); FAILURE (MECHANICAL); FATIGUE OF MATERIALS; MECHANICAL TESTING; SHEAR STRESS; STRESS CONCENTRATION; STRESSES; TRANSMISSION ELECTRON MICROSCOPY;

CRACK INITIATION MECHANISM; FATIGUE DAMAGE ACCUMULATION; LOAD CONTROLLED FOUR POINT BEND TESTING; PROXIMITY; SLIP BAND LENGTH; SLIP BAND TYPE; STRAIN DISCONTINUITIES; TRANSFORMED BETA PHASE STRAIN ACCUMULATION;

TITANIUM ALLOYS;

EID: 0030244146     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/1359-6454(96)00024-9     Document Type: Article

References (50)

1. R. M. Latanision and J. T. Fourie (eds), Surface Effects in Crystal Plasticity. Noordhoff, Leyden (1977).
2. H. Mughrabi, Scripta metall. mater. 26, 1499 (1992).
3. U. Essmann and K. Differt, Scripta metall. 22, 1337 (1988).
4. H. Mugrabi, F. Ackermann and K. Herz, in Fatigue Mechanisms (edited J. T. Fong), ASTM STP675, p. 69. ASTM, Philadelphia (1979).
5. H. Mugrabi, K. Herz and X. Stark, Int. J. Fract. 17, 193 (1981).
6. Scripta metall. mater. Viewpoint Set No. 18, 26, 1499 (1992).
7. S. N. Rosenbloom and C. Laird, Acta metall. mater. 41, 3473 (1993).
8. K. J. Bowman, S. E. Fartfield-Wunsch and R. Gibala, Scripta metall. mater. 26, 1529 (1992).
9. D. F. Neal, Proc. Fifth World Conf. on Titanium (edited by G. Lütjering, U. Zwicker and W. Bunk), Munich, Vol. III, pp. 1519-1526. Deutsche Gesellschaft für Metallkunde e. V., Germany (1985).
10. D. Eylon and J. A. Hall, Metall. Trans. 8A, 981 (1977).
11. D. Schechtman and D. Eylon, Metall. Trans. 9A, 1018 (1978).
12. D. Eylon, J. A. Hall, C. M. Pierce and D. L. Ruckle, Metall. Trans. 7A, 1817 (1976).
13. A. W. Funkenbusche and L. F. Coffin, Metall. Trans. 9A, 1159 (1978).
14. Y. Mahajan and H. Margolin, Metall. Trans. 13A, 257 (1982).
15. Y. Mahajan and H. Margolin, Metall. Trans. 13A, 269 (1982).
16. A. L. Dowson, A. C. Hollis and C. J. Beevers, Int. J. Fatigue 14, 261 (1992).
17. A. L. Dowson, C. J. Beevers and L. Grabowski, Titanium 92, Science and Technology, Proc. Seventh World Titanium Congress, San Diego, California, 3 Vols. The Minerals, Metals and Materials Soc., Warrendale, PA (1994).
18. S. Saal, L. Wagner, G. Lütjering, H. Pillhofer and M. A. Daeubler, Z. Metallk. 81, 535 (1990).
19. P. G. Partridge, Review 118, Metals Mater. 1, 169 (1967).
20. N. E. Paton and R. E. Spurling, Metall. Trans. 7A, 1769 (1976).
21. I. P. Jones and W. B. Hutchinson, Acta metall. 29, 951 (1981).
22. H. Numakura, Y. Minonishi and M. Koiwa, Scripta metall. 20, 1581 (1986).
23. H. W. Rosenberg, Proc. Conf. The Science, Technology and Applications of Titanium (edited by R. I. Jaffee and N. E. Promisel), pp. 851-859. Pergamon Press, New York (1970).
24. G. Harrison, Private Communication.
25. P. J. Goodhew, Thin Foil Preparation for Electron Microscopy (edited by A. M. Glauert), pp. 139-153. Elsevier, Oxford (1985).
26. G. J. Baxter, PhD Thesis, University of Sheffield, Sheffield (1994).
27. R. J. H. Wanhill, R. Galatolo and C. E. W. Looije, National Aerospace Laboratory (Netherlands). N90-11877/9/XAB, 30 June 1988, pp. 30.
28. C. Hammond and J. Nutting, Forging and Properties of Aerospace Materials, Leeds, U.K. pp. 75-102. T.M.S., London (1978).
29. M. T. Cope and M. J. Hill, Proc. Sixth World Conf on Titanium (edited by P. Lacombe, R. Tricot and G. Béranger), Cannes, France, Vol. I, pp. 153-158, Les Ulis Cedex, France (1989).
30. B. Shollock, Rolls-Royce Research Brochure PVJ2-118D (RGR 10088) Final Report, University of Oxford (1991).
31. C. Ramachandra, A. K. Singh and G. M. K. Sarma, Metall. Trans. 24A, 1273 (1993).
32. A. P. Woodfield, P. J. Postans, M. H. Loretto and R. E. Smallman, Acta metall. 36, 507 (1988).
33. J. White, M. H. Loretto, R. E. Smallman and M. R. Winstone, Proc. Fifth World Conf on Titanium (edited by G. Lütjering, U. Zwicker and W. Bunk), Munich, Vol. IV, pp. 2297-2304. Deutsche Gesellschaft für Metallkunde, Germany (1985).
34. G. T. Hahn, R. G. Hoagland and A. R. Rosenfield, Metall. Trans. 3, 1189 (1972).
35. J. C. Williams and G. Lütjering, Proc. Conf. Titanium '80, Science and Technology (edited by H. Kimura and O. Izumi), Vol. I, pp. 671-681. T.M.S.-A.I.M.E., Warrendale, PA (1980).
36. M. J. Blackburn and J. C. Williams, Trans. A.S.M. 62, 398 (1969).
37. A. Gysler and S. Weissman, Acta metall. 18, 785 (1970).
38. Z. Liu and G. Welsch, Proc. Sixth World Conf. on Titanium (edited by P. Lacombe, R. Tricot and G. Béranger), Cannes, France, Vol. I, pp. 99-104. Les Ulis Cedex, France (1989).
39. J. Y. Lim, C. J. McMahon, Jr, D. P. Pope and J. C. Williams, Metall. Trans. 7A, 139 (1976).
40. P. Neumann, Scripta metall. mater. 26, 1535 (1992).
41. R. R. Keller, W. Zielinski and W. W. Gerberich, Scripta metall. mater. 26, 1523 (1992).
42. P. Lukas, L. Kunz and J. Krejei, Scripta metall. mater. 26, 1511 (1992).
43. S. I. Hong, C. Laird, H. Mugrabi and Z. Wang, Scripta metall. mater. 26, 1517 (1992).
44. H. Abdel-Raouf, T. H. Topper and A. Plumtree, Fatigue Fract. Engng Mater. Struct. 15, 895 (1992).
45. H. Abdel-Raouf, T. H. Topper and A. Plumtree, Fatigue Fract. Engng Mater. Struct. 25, 597 (1991).
46. K. S. Chan and D. A. Koss, Mater. Sci. Engng 43, 177 (1980).
47. D. L. Davidson and D. Eylon, Metall. Trans. 11A, 737 (1980).
48. C. M. Ward-Close and C. J. Beevers, Metall. Trans. 11A, 1007 (1980).
49. T. W. Farthing, Proc. Conf. Titanium '80, Science and Technology (edited by H. Kimura and O. Izumi), Vol. I, pp. 29-37. TMS. A.I.M.E., Warrendale, PA (1980).
50. R. Brown and G. C. Smith, Metallography 15, 269 (1982).