Tensile creep behavior of a vitreous-bonded aluminum oxide under static and cyclic loading

Journal of the American Ceramic Society

Volumn 79, Issue 9, 1996, Pages 2353-2363

  Dey, Nishit ^a,c,d   Socie, Darrell F ^b,c   Hsia, K Jimmy ^a,c  

^a UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

^b University of Illinois at Urbana Champaign   (United States)

^c AMERICAN CERAMIC SOCIETY   (United States)

^d GENERAL ELECTRIC COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CRACKS; CREEP; DEFORMATION; FAILURE (MECHANICAL); GRAIN BOUNDARIES; LOADS (FORCES); MECHANICAL TESTING; STRAIN RATE; STRESSES; THERMAL EFFECTS;

CREEP RESISTANT; CREEP RUPTURE BEHAVIOR; CREEP STRAIN RATE; GRAIN BOUNDARY SECOND PHASE; MULTIGRAIN JUNCTION; STEADY STATE CREEP RATE RATIO; TENSILE CREEP BEHAVIOR; UNIAXIAL CYCLIC TENSILE LOADING; UNIAXIAL STATIC TENSILE LOADING; VITREOUS BONDED ALUMINUM OXIDE;

ALUMINA;

EID: 0030243855     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.1996.tb08983.x     Document Type: Article

References (38)

1. S. M. Wiederhom and E. R. Fuller, Jr., "Structural Reliability of Ceramic Materials," Mater. Sci. Eng., 71 169-86 (1985).
2. G. D. Quinn, "Fracture Mechanism Maps for Advanced Structural Ceramics, Part I: Methodology and Hot-Pressed Silicon Nitride Results," J. Mater. Sci., 25, 4361-76 (1990).
3. D. S. Wilkinson, C. H. Caceres, and A. G. Robertson, "Damage and Fracture Mechanisms During High-Temperature Creep in Hot-Pressed Alumina," J. Am. Ceram. Soc., 74 [5] 922-33 (1991).
4. C.-K. J. Lin and D. F. Socie, "Static and Cyclic Fatigue of Alumina at High Temperature," J. Am. Ceram. Soc., 74 [7] 1511-18 (1991).
5. C.-K. J. Lin, D. F. Socie, Y. Xu, and A. Zangvil, "Static and Cyclic Fatigue of Alumina at High Temperature: II, Failure Analysis," J. Am. Ceram. Soc., 75 [3] 637-48 (1992).
6. U. Ramamurthy, A. S. Kim, S. Suresh, and J. J. Petrovic, "Micromechanisms of Creep-Fatigue Crack Growth in a Suicide-Matrix Composite with SiC Particles," J. Am. Ceram. Soc., 76 [8] 1953-64 (1993).
7. L. Ewart and S. Suresh, "Elevated-Temperature Crack Growth in Polycrystalline Alumina under Static and Cyclic Loads," J. Mater. Sci., 27, 5181-91 (1992).
8. M. G. Jenkins, M. K. Ferber, and C.-K. J. Lin, "Apparent Enhanced Fatigue Resistance under Cyclic Tensile Loading for a HIPed Silicon Nitride," J. Am. Ceram. Soc., 76 [3] 782-92 (1993).
9. R. L. Tsai and R. Raj, "Creep Fracture in Ceramics Containing Small Amounts of a Liquid Phase," Acta Metall. 30, 1043-58 (1982).
10. N. Dey and D. F. Socie, "Tensile Creep Behavior of Alumina under Static and Cyclic Loading," Ceram. Eng. Sci. Proc., 15 [5] 634-41 (1994).
11. 4-MgO Alloys, Part 2: Source of Viscoelastic Effect," J. Mater. Sci., 15, 611-15 (1980).
12. R. M. Arons and J. K. Tien, "Creep and Strain Recovery in HIPed Silicon Nitride," J. Mater. Sci., 15, 2046-58 (1980).
13. W. R. Cannon and T. G. Langdon, "REVIEW: Creep of Ceramics, Part I: Mechanical Characteristics," J. Mater. Sci., 18, 1-50 (1983).
14. M. K. Ferber and M. G. Jenkins, "Evaluation of the Strength and Creep-Fatigue Behavior of HIPed Silicon Nitride," J. Am. Ceram. Soc., 75 (9) 2453-62 (1992).
15. F. C. Monkman and N. J. Grant, "An Empirical Relationship between Rupture Life and Minimum Creep Rate in Creep-Rupture Tests," Proc. Am. Soc. Test. Mater., 56, 593-620 (1956).
16. 4," Ceram. Eng. Sci. Proc. 12 [9-12] 1862-72 (1991).
17. N. Dey, D. F. Socie, and K. J. Hsia, "Modelling Static and Cyclic Fatigue in Ceramics Containing a Viscous Grain Boundary Phase," Acta Metall. Mater., 43, 2163-75 (1995).
18. S. M. Wiederhorn, B. J. Hockey, R. F. Krause, Jr., and K. Jakus, "Creep and Fracture of a Vitreous-Bonded Aluminium Oxide," J. Mater. Sci., 21, 810-24 (1986).
19. S. M. Wiederhorn, B. J. Hockey, D. C. Cranmer, and R. Yeckley, "Transient Creep Behavior of HIPed Silicon Nitride," J. Mater. Sci., 27, 445-53 (1992).
20. B. J. Hockey, S. M. Wiederhom, W. Liu, J. G. Baldoni, and S.-T. Buljan, "Tensile Creep of Whisker-Reinforced Silicon Nitride," J. Mater. Sci., 26, 3931-39 (1991).
21. J.-L. Ding, K. C. Liu, K. L. More, and C. R. Brinkman, "Creep and Creep Rupture of an Advanced Silicon Nitride Ceramics," J. Am. Ceram. Soc., 77 [4] 867-74 (1994).
22. M. K. Ferber, M. G. Jenkins, T. A. Nolan, and R. L. Yeckley, "Comparison of Creep and Creep Rupture Performance of Two HIPed Silicon Nitride Ceramics," J. Am. Ceram. Soc., 77 [3] 657-65 (1994).
23. T. Ohji and Y. Yamauchi, "Tensile Creep and Creep Rupture Behavior of Monolithic and SiC-Whisker-Reinforced Silicon Nitride Ceramics," J. Am. Ceram. Soc., 76 [12] 3105-12 (1993).
24. G. W. Hollenberg, G. R. Terwillinger, and R. S. Gordon, "Calculation of Stresses and Strains in Four-Point Bending Creep Tests," J. Am. Ceram. Soc., 54 [4] 196-99 (1971).
25. J. R. Dryden, D. Kucerovshy, D. S. Wilkinson, and D. F. Watt, "Creep Deformation Due to a Viscous Grain Boundary Phase," Acta Metall., 37, 2007-15 (1989).
26. G. M. Pharr and M. F. Ashby, "On Creep Enhanced by a Liquid Phase," Acta Metall., 31, 129-38 (1983).
27. R. Raj and C. K. Chyung, "Solution-Precipitation Creep in Glass Ceramics," Acta Metall., 29, 159-66 (1981).
28. F. F. Lange, "Non-Elastic Deformation of Polycrystals with a Liquid Phase"; pp. 361-81 in Deformation of Ceramic Materials. Edited by R. C. Bradt and R. E. Tressler. Plenum Press, New York, 1975.
29. R. Morrell and K. H. G. Ashbee, "High Temperature Creep of Lithium Zinc Silicate Glass-Ceramics, Part I: General Behavior and Creep Mechanisms," J. Mater. Sci., 8, 1253-70 (1973).
30. A. G. Evans and A. Rana, "High Temperature Failure Mechanisms in Ceramics," Acta Metall., 28, 129-41 (1980).
31. S. Suresh and J. R. Brockenbrough, "A Theory for Creep by Interfacial Flaw Growth in Ceramics and Ceramic Composites," Acta Metall. Mater., 38, 55-68 (1990).
32. A. Venkateswaran and D. P. H. Hasselman, "Elastic Creep of Stressed Solids due to Time-Dependent Changes in Elastic Properties," J. Mater. Sci., 16, 1627-32 (1981).
33. J. Weertman, "Effect of Cracks on Creep Rate," Trans. Am. Soc. Met., 62, 502-11 (1969).
34. J. E. Marion, A. G. Evans, M. D. Drory, and D. R. Clarke, "High Temperature Failure Initiation in Liquid Phase Sintered Materials," Acta Metall., 31, 1445-57 (1993).
35. R. Raj and P. E. D. Morgan, "Activation Energies for Densification, Creep, and Grain-Boundary Sliding in Nitrogen Ceramics," J. Am. Ceram. Soc., 64 [10] C-143-C-145 (1981).
36. K. Jakus, J. E. Ritter, and R. H. Schwillinski, "Viscous Glass Crack Bridging Forces in a Sintered Glassy Alumina at Elevated Temperatures," J. Am. Ceram. Soc., 76 [1] 33-38 (1993).
37. S. M. Johnson, B. J. Dalgleish, and A. G. Evans, "High-Temperature Failure of Polycrystalline Alumina: III, Failure Times," J. Am. Ceram. Soc., 67 [11] 759-63 (1984).
38. F. F. Lange, "Interrelations between Creep and Slow Crack Growth for Tensile Loading Conditions," Int. J. Fract., 12, 739-44 (1976).