A detailed physical analysis of the r-effect on lefm fatigue crack growth-II. On the combined roles of growth mechanisms and stress ratio

Engineering Fracture Mechanics

Volumn 55, Issue 2, 1996, Pages 289-297

  Lal, D N ^a  

^a BANARAS HINDU UNIVERSITY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK PROPAGATION; DUCTILITY; EFFECTS; FATIGUE OF MATERIALS; FRACTURE; MATHEMATICAL MODELS; STRESSES;

CRACK TIP ZONE; FATIGUE CRACK GROWTH; REVERSED SHEAR; SHEAR DECOHESION; SLIP REVERSAL; STRESS RATIO; SUBMICROSCOPIC CLEAVAGE;

FRACTURE MECHANICS;

CRACK PROPAGATION; FATIGUE CRACKS;

EID: 0030239437     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/0013-7944(95)00220-0     Document Type: Article

References (48)

1. Schijve, J., Fatigue of aircraft materials and structures. Int. J. Fatigue 1994, 16, 1, 22-32.
2. Paris, P. C. and Erdogan, F., A critical analysis of crack propagation laws. J. Basic Engng, Series D 1963, 85, 4, 528-534.
3. Lal, D. N., A detailed physical analysis of the R-effect on LEFM fatigue crack growth, Part I: On the combined roles of critical zones, LEFM parameters, and stress ratio. Engng Fracture Mech. 1996, 55, 115-132.
4. Elber, W., The significance of fatigue crack closure. Damage Tolerance in Aircraft Structures, ASTM STP 1971, 486, 230-242.
5. Suresh, S. and Ritchie, R. O., Near threshold fatigue crack propagation: a perspective on the role of crack closure to fatigue. Crack Growth Threshold Concepts (Edited by D. Davidson and S. Suresh), pp. 227-261. TMS-AIME, Pa. (1984).
6. Suresh, S., Zamiski, G. F. and Ritchie, R. O., Oxide induced closure: an explanation for near-threshold corrosion fatigue behaviour. Metall. Trans. 1981, 12A, 1435-1443.
7. Shimojo, M., Chujo, M., Higo, Y. and Nunomura, S., Effect of load ratio on the deformation behavior of fatigue crack tips. Int. J. Fatigue 1993, 15, 6, 455-459.
8. Lal, D. N. and Namboodhiri, T. K. G., A model for the effect of mean stress on the threshold condition for fatigue crack propagation. Mater. Sci. Engng 1990, A130, 37-49.
9. Lal, D. N., A model for the combined effects of stress ratio and grain size on the LEFM fatigue threshold condition. Fatigue Fracture Engng Mater. Struct. 1992, 15, 775-792.
10. Lal, D. N., The combined effects of stress ratio and yield strength on the LEFM fatigue threshold condition. Fatigue Fracture Engng Mater. Struct. 1992, 15, 1199-1212.
11. Lal, D. N., A model for the effect of gaseous environment on the LEFM fatigue threshold condition of steels. Fatigue Fracture Engng Mater. Struct. 1992, 15, 793-807.
12. Lal, D. N., A new mechanistic approach to analysing LEFM fatigue crack growth behavior of metals and alloys. Engng Fracture Mech. 1994, 47, 3, 379-401.
13. Lal, D. N., A mechanistic model for the influence of stress ratio on the LEFM fatigue crack growth behavior of metals and alloys - I. Crack-ductile materials. Engng Fracture Mech. 1994, 49, 871-897.
14. Lal, D. N., A mechanistic model for the effect of stress ratio on the LEFM fatigue crack growth behavior of metals and alloys - II. Crack-brittle materials. Engng Fracture Mech. 1994, 49, 899-931.
15. Forman, R. G., Kearney, V. F. and Engle, R. M., Numerical analysis of crack propagation in cyclic-loaded structures. J. Basic. Engng 1967, 89, 459-464.
16. Lal, D. N., On the combined influence of Young's modulus and stress ratio on the LEFM fatigue crack growth process - A new mechanistic approach. Engng Fracture Mech., in press 1996.
17. Lal, D. N., A new mechanistic analysis of high-ΔK fatigue crack growth with the effects of stress ratio and fracture toughness, Part I: stage III crack growth. Engng Fracture Mech. (submitted) 1995.
18. Lindley, T. C. and Richards, C. E., The relevance of crack closure to fatigue crack propagation. Mater. Sci. Engng 1974, 14, 281-293.
19. Clerivet, A. and Bathias, C., Study of crack tip opening under cyclic loading taking into account the environment and R-ratio. Engng Fracture Mech. 1979, 12, 599-611.
20. Lal, D. N. and Weiss, V., A notch analysis of fracture approach to fatigue crack propagation. Metall. Trans. 1978, 9A, 413-426.
21. Liu, H. W., A review of fatigue crack growth analysis. Theor. Appl. Fract. Mech. 1991, 16, 91-108.
22. Tomkins, B., Fatigue crack propagation-An analysis. Phil. Mag. R. Soc. 1968, 18, 1041-1066.
23. Pook, L. P. and Frost, N. E., A fatigue crack growth theory. Int. J. Fracture 1973, 9, 53-61.
24. Liu, H. W. and Nobu, I., A mechanical model for fatigue crack propagation. Fracture 1969, Proc. 2nd Int. Conf. on Fracture, pp. 812-823. Brighton, U.K. (1969).
25. Laird, C. and Smith, G. C., Crack propagation in high stress fatigue. Phil. Mag. 1962, 7, 847-857.
26. McClintock, F. A., Discussion on the influence of metallurgical structure on the mechanism of fatigue crack propagation. Fatigue Crack Propagation, ASTM STP (Edited by C. Laird), Vol. 415, p. 170 (1967).
27. Neumann, P., New experiments concerning the slip process at propagating fatigue cracks. Acta Metall. 1974, 22, 1155-1165.
28. Pelloux, R. M. N., Crack extension by alternating shear. Engng Fracture Mech. 1970, 1, 697-704.
29. Liu, H. W., Yang C. Y. and Kuo, A. S., Cyclic crack growth analysis and modeling of crack tip deformation. Proc. Int. Symposium on Fracture Mechanics (Edited by N. Perrone, H. Liebowitz, D. Mulville and W. Pilkey), p. 629. Univ. Press of Va., Charlottesville (1978).
30. Pelloux, R. M. N., Mechanisms of formation of ductile striations. Trans. ASM 1969, 62, 281-284.
31. Kocanda, S., Fatigue Failure of Metals, pp. 77-80, 302-321. Sijthoff and Noordhoff, The Netherlands (1978).
32. Laird, C., Mechanisms and theories of fatigue. Fatigue and Microstructure (Edited by M. Meshii), pp. 187-190. ASM, Ohio (1979).
33. Hertzberg, R. W., Deformation and Fracture Mechanics of Engineering Materials, 3rd Edition, pp. 530-537. John Wiley, N.Y. (1989).
34. Lindley, T. C. and McCartney, L. N., Mechanics and mechanisms of fatigue crack growth, Developments in Fracture Mechanics (Edited by G. G. Chell), pp. 247-322. Applied Science Publishers, London (1981).
35. Ritchie, R. O., Near threshold fatigue crack propagation in steels. Int. Metals. Rev. 1979, 24, 5/6, 205-230.
36. Kocanda, S., Fatigue Failure of Metals, pp. 338-339. Sijthoff and Noordhoff, The Netherlands (1978).
37. Kocanda, S., Fatigue Failure of Metals, pp. 330-331. Sijthoff and Noordhoff, The Netherlands (1978).
38. Kocanda, S., Fatigue Failure of Metals, pp. 274-276. Sijthoff and Noordhoff, The Netherlands (1978).
39. Lal, D. N., A new model for the threshold condition for initiation and propagation of fatigue cracks. Ph.D. Thesis, Syracuse University, Syracuse, N.Y. (1974).
40. Yuen, A., Hopkins, S. W., Leverant, G. R. and Rau, C. A., Correlation between fatigue surface appearance and fracture mechanics parameters for Stage II fatigue crack propagation in Ti-6Al-4V. Metall. Trans. 1974, 5, 1833-1842.
41. Bowles, C. Q. and Broek, D., On the formation of fatigue striations. Int. J. Fracture Mech. 1972, 8, 1, 75-85.
42. Pelloux, R. M. N., Corrosion fatigue crack propagation, 2nd Int. Conf. on Fracture, Fracture 1969, Brighton, p. 731. Chapman and Hall, London (1969).
43. Schijve, J., Four lectures on fatigue crack growth. Engng Fracture Mech. 1979, 11, 167-221.
44. Rice, J. R., Mechanics of crack-tip deformation and extension by fatigue. Fatigue Crack Propagation, ASTM STP 1967, 415, 247.
45. Weertman, J., Fatigue crack propagation theories, Fatigue and Microstructure (Edited by M. Meshii), pp. 279-306. ASM, Ohio (1979).
46. Lloyd, G. J., High temperature fatigue and creep-fatigue crack propagation: mechanics, mechanisms and observed behavior in structural materials, Fatigue at High Temperature (Edited by R. P. Skelton), pp. 187-258. Applied Science Publishers, London (1983).
47. Pelloux, R. M. N., Fractographic analysis of the influence of constituent particles on fatigue crack propagation in aluminium alloys. Trans. ASM 1964, 57, 511.
48. Laird, C. and Veaux, R. D. L., Additional evidence for the plastic blunting process of fatigue crack propagation. Metall. Trans. A. 1977, 8A, 657-664.