A structure oriented model to simulate the shear induced crystallization in injection moulded polymers: A Lagrangian approach

Polymer

Volumn 37, Issue 20, 1996, Pages 4555-4571

  Hsiung, C M ^a   Cakmak, M ^b   Ulcer, Y ^b  

^a UNIVERSITY OF LOUISIANA AT LAFAYETTE   (United States)

^b UNIVERSITY OF AKRON   (United States)

Author keywords

Computer simulation modelling; Engineering thermoplastics; Injection moulding; Stress induced crystallization

Indexed keywords

COMPUTER SIMULATION; CRYSTAL STRUCTURE; CRYSTALLINE MATERIALS; CRYSTALLIZATION; INJECTION MOLDING; LAGRANGE MULTIPLIERS; MORPHOLOGY; SHEAR STRESS; THERMAL EFFECTS; VISCOSITY;

ENGINEERING THERMOPLASTICS; GAPWISE CRYSTALLINITY DISTRIBUTION; LENGTHWISE CRYSTALLINITY DISTRIBUTION; POLY(P PHENYLENE SULFIDE); STRESS INDUCED CRYSTALLIZATION;

THERMOPLASTICS;

EID: 0030230331     PISSN: 00323861     EISSN: None     Source Type: Journal    
DOI: 10.1016/0032-3861(96)00291-1     Document Type: Article

References (63)

1. Spruiell, J. E. and White, J. L. Polym. Eng. Sci. 1975, 15, 660
2. Hsiung, C. M., Cakmak, M. and White, J. L. Int. Polym. Proc. 1990, 5, 109
3. Hsiung, C. M., Cakmak, M. and White, J. L. Polym. Eng. Sci. 1990, 30, 967
4. Hsiung, C. M. and Cakmak, M. J. Appl. Polym. Sci. 1993, 47, 125; 149
5. Oyanagi, Y. and Yamaguchi, Y. Res. Rep. Kogakuin Univ. 1964, 15, 1
6. Heise, B., Kilian, H. G., Lipke, G., Schultz, P., Woebcken, W. and Zohren, J. Kolloid Z. 1972, 25, 120
7. Heckman, W. and Johnson, V. Colloid Polym. Sci. 1974, 252, 826
8. Heise, B. Colloid Polym. Sci. 1976, 254, 279
9. Fryer, R. E. J. Appl. Polym. Sci. 1979, 18, 947
10. Kantz, M. R., Newman, H. D. and Stigale, F. H. J. Appl. Polym. Sci. 1972, 16, 1245
11. Kantz, M. R. Int. J. Polym. Mater. 1974, 3, 245
12. Fitchmun, D. R. and Mencik, Z. J. Polym. Sci., Polym. Phys. Edn. 1974, 11, 951
13. Matsumoto, K., Miura, I. and Hayashida, K. Kobunshi Ronbunshu 1979, 36, 401
14. Clark, E. S. SPE J 1987, 23, 46
15. Ulcer, Y. and Cakmak, M. SPE ANTEC Tech. Pap. 1993, 39, 1073
16. McCaffrey, N. J., Friedl, C. and Thomas, R. ANTEC'90 1990, 382
17. Miao, J., Hsiung, C. M., Cakmak, M. and Ulcer, Y. J. Appl. Polym. Sci. (submitted)
18. Oda, K., White, J. L. and Clark, E. S. Polym. Eng. Sci. 1978, 18, 53
19. Dietz, W., White, J. L. and Clark, E. S. Polym. Eng. Sci. 1978, 18, 273
20. Greener, J. and Pearson, G. H. J. Rheol. 1983, 27, 115
21. Marruci, G. Rheol. Acta 1973, 12, 269
22. Kamal, M. R. and Tan, V. Polym. Eng. Sci. 1979, 19, 558
23. Waales, J. L. S., Van Leeuwen, J. and Vander Vigh, R. Polym. Eng. Sci. 1972, 12, 358
24. Wang, K. K. Injection Molding Project, Cornell University, Progress Report #7, Oct. 1980
25. Isayev, A. I. and Hieber, C. A. Rheol. Acta 1980, 19, 168
26. Rigdahl, M. Int. J. Polym. Mater. 1976, 5, 43
27. Muzzy, J. D., Bright, D. G. and Hoyos, G. H. Polym. Eng. Sci. 1978, 18, 437
28. Sifleet, W. Polym. Eng. Sci. 1973, 13 1, 10
29. Kamal, M. R. and Lafleur, P. G. Polym. Eng. Sci. 1984, 24, 692
30. Kamal, M. R. and Lafleur, P. G. SPE ANTEC'83 1983, 386
31. Lafleur, P. G. and Kamal, M. R. Polym. Eng. Sci. 1986, 26, 92
32. Kamal, M. R. and Lafleur, P. G. Polym. Eng. Sci. 1986, 26, 103
33. Browne, L. W. B. in 'Numerical Simulation of Fluid Motion', North Holland Publishing Co., 1978
34. Chu, E., Goyal, S. K. and Kamal, M. R. The SPI/SPE Plastics Show & Conference East, Philadelphia, September, 238, 1989
35. White, J. L. and Metzner, A. B. J. Appl. Polym. Sci. 1963, 7, 1867
36. Nakamura, K. J. Appl. Polym. Sci. 1972, 16, 1077
37. Papathanasiou, T. D. and Guell, D. C. SPE ANTEC Tech. Pap. 1993, 39, 1603
38. Patel, R. M. and Spruiell. J. E. Polym. Eng. Sci. 1991, 30, 730
39. Friedl, C. F. and McCaffrey, N. J. SPE ANTEC Tech. Pap. 1991, 37, 330
40. Malkin, A. Y. Polymer 1983, 24, 81
41. Malkin, A. Y. Polym. Eng. Sci. 1984, 24, 1396
42. Lord, H. A. and Williams, G. Polym. Eng. Sci. 1975, 15, 569
43. Kamal, M. R. and Kenig, S. Polym. Eng. Sci. 1972, 12, 294
44. Richardson, S. M. Rheol. Acta 1983, 22, 223
45. Hieber, C. A. and Shen, S. F. J. Non-Newtonian Fluid Mechanics 1980, 7, 1
46. Papathanasiou, T. D. and Kamal, M. R. SPE ANTEC Tech. Pap. 1991, 37, 829
47. Domine, J. D. and Gogos, C. G. Polym. Eng. Sci. 1980, 20, 847
48. Manzione, L. T. Polym. Eng. Sci. 1981, 21, 1234
49. Manzione, L. T. and Osinsky, J. S. Polym. Eng. Sci. 1983, 23, 576
50. Hsiung, C. M. and Cakmak, M. Polym. Eng. Sci. 1991, 31, 1372
51. Driscoll, P. D. and Bogue, D. C. J. Appl. Polym. Sci. 1990, 39, 1755
52. Utracki, L. A. Polym. Eng. Sci. 1983, 23, 446
53. Simha, R. Macromolecules 1977, 10, 1025
54. Haas, T. W. and Maxwell, B. Polym. Eng. Sci. 1969, 9, 225
55. Jog, J. P. and Nadkarni, V. M. J. Appl. Polym. Sci. 1995, 30, 997
56. Lopez, L. C. and Wilkes, G. L. Polymer 1988, 29, 106
57. Manzione, L. T. SPE ANTEC Tech. Paper 1987, 33, 285
58. Lagasse, R. R. and Maxwell, B. Polym. Eng. Sci. 1976, 16, 189
59. Chien, M. C. and Weiss, R. A. Polym. Eng. Sci. 1988, 28, 6
60. Harlow, F. H. and Welch, J. D. Phys. Fluids 1965, 8, 2182
61. Gogos, C. G. and Huang, C. F. Polym. Eng. Sci. 1986, 26, 1457
62. Rose, W. Nature 1961, 19, 242
63. Tadmor, Z. J. Appl. Polym. Sci. 1974, 18, 1753