A 3d-lda study of the relation between wall shear stress and intimal thickness in a human aortic bifurcation

Journal of Biomechanical Engineering

Volumn 118, Issue 3, 1996, Pages 273-279

  Hayashi, Kozaburo ^a   Yanai, Yutaka ^b   Naiki, Takeru ^b  

^a OSAKA UNIVERSITY   (Japan)

^b HOKKAIDO UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

BIFURCATION (MATHEMATICS); BLOOD VESSELS; ELASTOMERS; MATHEMATICAL MODELS; NON NEWTONIAN LIQUIDS; PHYSIOLOGY; POLYURETHANES; PULSATILE FLOW; RHEOLOGY; SHEAR STRESS; THREE DIMENSIONAL; VELOCITY MEASUREMENT;

FLOW DIVIDER TIP; HUMAN AORTIC BIFURCATION; THICKNESS;

HEMODYNAMICS;

ELASTOMER; POLYURETHAN;

ADULT; ANEMOMETRY; AORTA BIFURCATION; ARTICLE; ATHEROGENESIS; ATHEROSCLEROTIC PLAQUE; CASE REPORT; ENDOTHELIUM CELL; FEMALE; HUMAN; HUMAN TISSUE; PLAQUE FORMING CELL; SHEAR STRESS;

AORTA; ARTERIOSCLEROSIS; FEMALE; HEMORHEOLOGY; HUMANS; LASER-DOPPLER FLOWMETRY; LIPIDS; MIDDLE AGED; MODELS, ANATOMIC; MODELS, CARDIOVASCULAR; PULSATILE FLOW; REPRODUCIBILITY OF RESULTS; STRESS, MECHANICAL; TUNICA INTIMA;

EID: 0030221111     PISSN: 01480731     EISSN: 15288951     Source Type: Journal    
DOI: 10.1115/1.2796007     Document Type: Article

References (53)

1. Anayiotos, A. S., Giddens, D. P., Jones, S. A., Glagov, S., and Zarins, C. K., 1991, “Effects of Arterial Wall Distensibility on the Near Wall Flowfield in a Model of a Human Carotid Bifurcation,” 1991 Advances in Bioengineering, R. Vanderby, Jr., ed., ASME, New York, pp. 17-19.
2. Brookshier, K. K., and Tarbell, J. M., 1991, “Effects of Hematocrit on Wall Shear Rate in Oscillatory Flow: Do the Elastic Properties of Blood Play a Role?,” Biorheology, Vol. 28, pp. 569-587.
3. Caro, C. G., Fitz-Gerald, J. M., and Schroter, R. C., 1971, “Atheroma and Arterial Shear Observations, Correlation and Proposal of a Shear Dependent Mass Transfer Mechanism for Atherogenesis,” Proc. Royal Soc. London, Series B., Vol. 177, pp. 109-159.
4. Cho, Y. I., and Kensey, K., 1989, “Effects of the Non-Newtonian Viscosity of Blood on Hemodynamics of Diseased Arterial Flows,” 1989 Advances in Bioengineering, B. Rubinsky, ed., ASME, New York, pp. 147-148.
5. Deters, O. J., Bargeron, C. B., Mark, F. F., and Friedman, M. H., 1986, “Measurement of Wall Motion and Wall Shear in a Compliant Arterial Cast,” ASME Journal of Biomechanical Engineering, Vol. 108, pp. 355-358.
6. Duncan, D. D., Bargeron, C. B., Borchardt, S. E., Deters, O. J., Gearhart, S. A., Mark, F. F., and Friedman, M. H., 1990, “The Effect of Compliance on Wall Shear in Casts of a Human Aortic Bifurcation,” ASME Journal of Biomechanical Engineering, Vol. 112, pp. 183-188.
7. Fatemi, R. S., and Rittgers, S. E., 1994, “Derivation of Shear Rates from NearWall LDA Measurements Under Steady and Pulsatile Flow Conditions,” ASME Journal of Biomechanical Engineering, Vol. 116, pp. 361-368.
8. Friedman, M. H., Bargeron, C. B., Hutchins, G. M., Mark, F. F., and Deters, O. J., 1980, “Hemodynamic Measurements in Human Arterial Casts, and Their Correlation with Histology and Luminal Area,” ASME Journal of Biomechanical Engineering, Vol. 102, pp. 247-251.
9. Friedman, M. H., Hutchins, G. M., Bargeron, C. B., Deters, O. J., and Mark, F. F., 1981, “Correlation Between Intimal Thickness and Fluid Shear in Human Arteries,” Atherosclerosis, Vol. 39, pp. 425-436.
10. Friedman, M. H., Deters, O. J., Bargeron, C. B., Hutchins, G. M., and Mark, F. F., 1986, “Shear-Dependent Thickening of the Human Arterial Intima,” Atherosclerosis, Vol. 60, pp. 161-171.
11. Friedman, M. H., Bargeron, C. B., Deters, O. J., Hutchins, G. M., and Mark, F. F., 1987, “Correlation Between Wall Shear and Intimal Thickness at a Coronary Artery Branch,” Atherosclerosis, Vol. 68, pp. 27-33.
12. Friedman, M. H., 1989, “A Biologically Plausible Model of Thickening of Arterial Intima Under Shear,” Arteriosclerosis, Vol. 9, pp. 511-522.
13. Friedman, M. H., Bargeron, C. B., Mark, F. F., and Duncan, D. D., 1989, “Effects of Non-Newtonian Rheology on Wall Shear in a Compliant Cast of a Human Aortic Bifurcation,” Biorheology, Vol. 26, p. 602.
14. Friedman, M. H., Bargeron, C. B., Duncan, D. D., Hutchins, G. M., and Mark, F. F., 1992, “Effects of Arterial Compliance and Non-Newtonian Rheology on Correlations Between Intimal Thickness and Wall Shear,” ASME Journal of Biomechanical Engineering, Vol. 114, pp. 317-320.
15. Friedman, M. H., 1993, “Arteriosclerosis Research Using Vascular Flow Models: From 2-D Branches to Compliant Replicas,” ASME Journal of Biomechanical Engineering, Vol. 115, pp. 595-601.
16. Fry, D. L., 1969, “Certain Histological and Chemical Response of the Vascular Interface to Acutely Induced Mechanical Stress in the Aorta of the Dog,” Circulation Research, Vol. 24, pp. 93-108.
17. Fukushima, T., and Azuma, T., 1982, “The Horseshoe Vortex: A Secondary Flow Generated with Stenosis, Bifurcation and Branchings,” Biorheology, Vol. 19, pp. 143-154.
18. Hayashi, K., Handa, H., Nagasawa, S., Okumura, A., and Moritake, K., 1980, “Stiffness and Elastic Behavior of Human Intracranial and Extracranial Arteries,” J. Of Biomechanics, Vol. 13, pp. 175-184.
19. Hayashi, K., Nakamura, T., Takano, H., Umezu, M., Taenaka, Y., and Matsuda, T., 1984, “Design of Pusher-Plate-Type Left Ventricular Assist Device Based on Mechanical Analyses,” Artificial Organs, Vol. 8, pp. 204-214.
20. Hayashi, K., Matsuda, T., Takano, H., Umezu, M., Taenaka, Y., and Nakamura, T., 1985, “Effects of Implantation on the Mechanical Properties of the Polyurethane Diaphragm of Left Ventricular Assist Devices,” Biomaterials, Vol. 6, pp. 82-88.
21. Hayashi, K., and Nakamura, T., 1985, “Material Test System for the Evaluation of Mechanical Properties of Biomaterials,” J. Of Biomedical Materials Research, Vol. 19, pp. 133-144.
22. Hayashi, K., Takamizawa, K., Saito, T., Kira, K., Hiramatsu, K., and Kondo, K., 1989, “Elastic Properties and Strength of a Novel Small-Diameter, Compliant Polyurethane Vascular Graft,” J. Of Biomedical Materials Research: Applied Biomaterials, Vol. 23-A2, pp. 229-244.
23. Hayashi, K., 1993, “Experimental Approaches on Measuring the Mechanical Properties and Constitutive Laws of Arterial Walls,” ASME Journal of Biomechanical Engineering, Vol. 115, pp. 481-488.
24. Inokuchi, K., Kusaba, A., Kamori, M., Kina, M., and Okadome, L., 1982, “Intraluminal Velocity Profile Analyzed from Flow Wave Forms,” Surgery, Vol. 92, pp. 1006-1015.
25. Ku, D. N., Giddens, D. P., Zarins, C. K., and Glagov, S., 1985, “Pulsatile Flow and Atherosclerosis in the Human Carotid Bifurcation: Positive Correlation Between Plaque Location and Low and Oscillating Shear Stress,” Arteriosclerosis, Vol. 5, pp. 293-302.
26. Liepsch, D., 1985, “Laser-Doppler-Measurements in True-to-Scale Human Elastic Models with Newtonian and non-Newtonian Fluids,” Forum on Unsteady Flows in Biological Systems, M. Friedman and D. C. Wiggert, eds., ASME, New York, pp. 29-32.
27. Liepsch, D. W., 1986, “Flow in Tubes and Arteries-A Comparison,” Biorheology, Vol. 23, pp. 395-433.
28. Liepsch, D. W., Poll, A., Strigberger, J., Sabbah, H. N., and Stein, P. D., 1989, “Flow Visualization Studies in a Model of the Normal Human Aorta and Renal Arteries,” ASME Journal of Biomechanical Engineering, Vol. III, pp. 222-227.
29. Liepsch, D., 1990, “Flow Studies in a Rigid T-Junction Model with a nonNewtonian Fluid Using a 3-D Laser-Doppler Anemometer,” Biofluid Mechanics: Blood Flow in Large Vessels, D. Liepsch, ed., Springer-Verlag, Berlin, pp. 307-320.
30. Liepsch, D. W., Thurston, G., and Lee, M., 1991, “Studies of Fluids Simulating Blood-Like Rheological Properties and Applications in Models of Arterial Branches,” Biorheology, Vol. 28, pp. 39-52.
31. Liepsch, D., Moravec, S. T., and Baumgort, R., 1992, “Some Flow Visualization and Laser-Doppler-Velocity Measurements in a True-to-Scale Elastic Model of a Human Aortic Arch-A New Model Technique,” Biorheology, Vol. 29, pp. 563-580.
32. Lou, Z., and Yang, W.-J., 1993, “A Computer Simulation of the Blood Flow at the Aortic Bifurcation with Flexible Walls,” ASME Journal of Biomechanical Engineering, Vol. 115, pp. 306-315.
33. Mann, D. E., and Tarbell, J. M., 1990, “Flow of non-Newtonian Blood Analog Fluids in Rigid Curved and Straight Artery Models,” Biorheology, Vol. 27, pp. 711-733.
34. Mark, F. F., Bargeron, C. B., Deters, O. J., and Friedman, M. H., 1989, “Variations in Geometry and Shear Rate Distribution in Casts of Human Aortic Bifurcations,” J. Of Biomechanics, Vol. 22, pp. 577-582.
35. Matsumoto, T., Naiki, T., and Hayashi, K., 1994, “Flow Visualization Analysis of Pulsatile Flow in Elastic Straight Tubes,” Biorheology, Vol. 31, pp. 365-381.
36. Moore, J. E., Jr., Ku, D. N., Zarins, C. K., and Glagov, S., 1992, “Pulsatile Flow Visualization in the Abdominal Aorta Under Differing Physiologic Conditions: Implications for Increased Susceptibility to Atherosclerosis,” ASME Journal of Biomechanical Engineering, Vol. 114, pp. 391-397.
37. Naiki, T., Takemura, S., and Hayashi, K., 1994, “Effect of Wall Elasticity on Pulsatile Flow in Aortic Bifurcation (Flow Visualization Study in Bifurcation Models),” Trans. JSME, Series B, Vol. 60, pp. 3623-3629.
38. Naiki, T., Hayashi, K., and Takemura, S., 1995a, “An LDVand Flow Visualization Study of Pulsatile Flow in an Aortic Bifurcation Model,” Biorheology, Vol. 32, pp. 43-59.
39. Naiki, T., Yanai, Y., and Hayashi, K., 1995b, “Evaluation of High Polymer Solutions as Blood Analog Fluid (For the Model Study of Hemodynamics),” J. Of Japanese Society of Biorheology, Vol. 9, pp. 84-89.
40. Nazemi, M., and Kleinstreuer, C., 1989, “Analysis of Particle Trajectories in Aortic Artery Bifurcations with Stenosis,” ASME Journal of Biomechanical Engineering, Vol. III, pp. 311-315.
41. Nazemi, M., Kleinstreuer, C., Archie, J. P., and Sorrell, F. Y., 1989, “Fluid Flow and Plaque Formation in an Aortic Bifurcation,” ASME Journal of Biomechanical Engineering, Vol. III, pp. 316-324.
42. Nerem, R. M., Levesque, M. J., and Cornhill, J. F., 1981, “Vascular Endothelial Morphology as an Indicator of the Pattern of Blood Flow,” ASME Journal of Biomechanical Engineering, Vol. 103, pp. 172-176.
43. Nerem, R. M., 1992, “Vascular Fluid Mechanics, the Arterial Wall, and Atherosclerosis,” ASME Journal of Biomechanical Engineering, Vol. 114, pp. 274-282.
44. Okano, M., and Yoshida, Y., 1992, “Endothelial Cell Morphometry of Atherosclerotic Lesions and Flow Profiles at Aortic Bifurcations in Cholesterol Fed Rabbits,” ASME Journal of Biomechanical Engineering, Vol. 114, pp. 301-308.
45. Pedersen, E. M., Yoganathan, A. P., and Lefebvre, X. P., 1992, “Pulsatile Flow Visualization in a Model of the Human Abdominal Aorta and Aortic Bifurcation,” J. Of Biomechanics, Vol. 25, pp. 935-944.
46. Pedersen, E. M., Sung, H-W., and Yoganathan, A. P., 1994, “Influence of Abdominal Aortic Curvature and Resting Versus Exercise Conditions on Velocity Fields in the Normal Abdominal Aortic Bifurcation,” ASME Journal of Biomechanical Engineering, Vol. 116, pp. 347-354.
47. Rieu, R., Friggi, A., and Peiissier, R., 1985, “Velocity Distribution Along an Elastic Model of Human Arterial Tree,” J. Biomechanics, Vol. 18, pp. 703-715.
48. Siouffi, M., Peiissier, R., Farahifar, D., and Rieu, R., 1984, “The Effect of Unsteadiness on the Flow Through Stenoses and Bifurcations,” J. Of Biomechanics, Vol. 17, pp. 299-315.
49. Stein, P. D., Sabbah, H. N., Anbe, D. T., and Walburn, F. J., 1979, “Blood Velocity in the Abdominal Aorta and Common Iliac Artery of Man,” Biorheology, Vol. 16, pp. 249-255.
50. Tarbell, J. M., and Chang, L-J., 1986, “Numerical Simulation of Oscillatory Flow in Elastic Curved Tubes,” Proceedings of the 5th International Conference on Mechanics in Medicine and Biology (Bologna, July 1-5, 1986), pp. 107-110.
51. Walburn, F. J., Sabbah, H. N., Hawkins, E. T., and Stein, P. D., 1980, “Construction of Molds of Complex Arterial Segments,” ASME Journal of Biomechanical Engineering, Vol. 102, pp. 284-286.
52. Walburn, F. J., and Stein, P. D., 1980, “Flow in a Symmetrically Branched Tube Simulating the Aortic Bifurcation: The Effects of Unevenly Distributed Flow,” Annals of Biomedical Engineering, Vol. 8, pp. 159-173.
53. Walburn, F. J., Sabbah, H. N., and Stein, P. D., 1981, “Flow Visualization in a Model of an Atherosclerotic Human Abdominal Aorta,” ASME Journal of Biomechanical Engineering, Vol. 103, pp. 168-170.