On impact testing of subsize Charpy V-notch type specimens

ASTM Special Technical Publication

Volumn 1270, Issue , 1996, Pages 384-414

  Sokolov, Mikhail A ^a   Nanstad, Randy K ^a  

^a OAK RIDGE NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

GEOMETRY; IMPACT TESTING; LIGHT WATER REACTORS; PHASE TRANSITIONS; PLANT LIFE EXTENSION; PRESSURE VESSELS; TOUGHNESS; YIELD STRESS;

CHARPY V NOTCH SPECIMEN; DUCTILE TO BRITTLE TRANSITION CURVE; HEAVY SECTION STEEL IRRADIATION PROGRAM; REACTOR PRESSURE VESSEL STEEL; SUBSIZE CHARPY V NOTCH TYPE SPECIMEN; SURVEILLANCE DATA; TRANSITION TEMPERATURE; UPPER SHELF ENERGY; UPPER SHELF TOUGHNESS;

STEEL;

EID: 0030219168     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp16486s     Document Type: Article

References (36)

1. A. D. Amayev, A. M. Kryukov, and M. A. Sokolov, "Recovery of the Transition Temperature of Irradiated WWER-440 Vessel Metal by Annealing," pp. 369-79 in Radiation Embrittlement of Nuclear Reactor Pressure Vessel Steels: An International Review (Fourth Volume), ASTM STP 1170, L. E. Steele, Ed., American Society for Testing and Materials, Philadelphia, 1993.
2. A. M. Kryukov and M. A. Sokolov, "Investigation of Material Behavior Under Reirradiation after Annealing Using Subsize Specimens," pp. 417-23 in Small Specimen Test Techniques Applied to Nuclear Reactor Vessel Thermal Annealing and Plant Life Extension, ASTM STP 1204, W. R. Corwin, F. M. Haggag, and W. L. Server, Eds, American Society for Testing and Materials, Philadelphia, 1993.
3. W. L. Server, "Review of In-Service Thermal Annealing of Nuclear Reactor Pressure Vessels,"pp. 979-1008 in Effects of Radiation on Materials: Twelfth International Symposium, ASTM STP 870, F. A. Garner and J. S. Perrin, Eds., American Society for Testing and Materials, Philadelphia, 1985.
4. Proceedings of the DOE/SNL/EPRI-Sponsored Reactor Pressure Vessel Thermal Annealing Workshop, February 17-18, 1994, Albuquerque, New Mexico, SAND 94-1515, 1994.
5. R. Ahlstrand, E. N. Klausnitzer, D. Lange, C. Leitz, D. Pastor, and M. Valo, "Evaluation of the Recovery Annealing of the Reactor Pressure Vessel of NPP Nord (Greifswald) Units 1 and 2 by Means of Subsize Impact Specimens," pp. 312-43 in Radiation Embrittlement of Nuclear Reactor Pressure Vessel Steels: An International Review (Fourth Volume), ASTM STP 1170, L. E. Steele, Ed., American Society for Testing and Materials, Philadelphia, 1993.
6. A. D. Amayev, V. I. Badanin, A. M. Kryukov, V. A. Nikolayev, M. F. Rogov, and M. A. Sokolov, "Use of Subsize Specimens for Determination of Radiation Embrittlement of Operating Reactor Pressure Vessels," pp. 424-39 in Small Specimen Test Techniques Applied to Nuclear Reactor Vessel Thermal Annealing and Plant Life Extension, ASTM STP 1204, W. R. Corwin, F. M. Haggag, and W. L. Server, Eds., American Society for Testing and Materials, Philadelphia, 1993.
7. Standard Test Method for Notched Bar Impact Testing of Metallic Materials, ASTM E 23-93a, American Society for Testing and Materials, Philadelphia, 1993.
8. M. Grounes, "Review of Swedish Work on Irradiation Effects in Pressure Vessel Steels and on Significance of Data Obtained," pp. 224-59 in Effects of Radiation on Structural Metals, ASTM STP 426, American Society for Testing and Materials, Philadelphia, 1967.
9. C. Curll, "Subsize Charpy Correlation with Standard Charpy," Materials Research & Standards, 91-94 (February 1961).
10. R. C. McNicol, "Correlation of Charpy Test Results for Standard and Nonstandard Size Specimens," Welding Research Supplement, 385-93 (September 1965).
11. E. Klausnitzer, H. Kristof, and R. Leistner, "Assessment of Toughness Behavior of Low Alloy Steels by Subsize Impact Specimens," pp. 3-37 in Transactions of the 8th International Conference on Structural Mechanics in Reactor Technology, Brussels, August 1985, Vol G, International Association for Structural Mechanics in Reactor Technology, 1986.
12. W. R. Convin and A. M. Hougland, "Effect of Specimen Size and Material Condition on the Charpy Impact Properties of 9Cr-1Mo-V-Nb Steel," pp. 325-38 in The Use of Small-Scale Specimens for Testing Irradiated Material, ASTM STP 888, W. R. Corwin and G. E. Lucas, Eds., American Society for Testing and Materials, Philadelphia, 1986.
13. G. E. Lucas, G. R. Odette, J. W. Sheckherd, P. McConnell, and J. Perrin, "Subsized Bend and Charpy V-Notch Specimens for Irradiated Testing," pp. 304-24 in The Use of Small-Scale Specimens for Testing Irradiated Material, ASTM STP 888, W. R. Corwin and G. E. Lucas, Eds., American Society for Testing and Materials, Philadelphia, 1986.
14. H. Kayano, H. Kurishita, A. Kimura, M. Narui, M. Yamazaki, and Y. Suzuki, "Charpy Impact Testing Using Miniature Specimens and Its Application to the Study of Irradiation Behavior of Low-Activation Ferritic Steels," J. Nucl. Mater. 179-181, 425-88 (1991).
15. H. Kurishita, H. Kayano, M. Narui, M. Yamazaki, Y. Kano, and I. Shibahara, "Effects of V-Notch Dimensions on Charpy Impact Test Results for Differently Sized Miniature Specimens of Ferritic Steel," Mater. Trans., JIM, 34(11), 1042-52 (1993).
16. M. P. Manahan and C. Charles, "A Generalized Methodology for Obtaining Quantitative Charpy Data from Test Specimens of Nonstandard Dimensions," Nucl. Technol. 90, 245-59 (May 1990).
17. M. P. Manahan, "Determination of Charpy Transition Temperature of Ferritic Steels Using Miniaturized Specimens," J. Mater. Sci. 25, 3429-38 (1990).
18. NDT Determinations for Midland Weld WF-70, USNRC Report NUREG/CR-5914 (ORNL-6740), December 1992.
19. D. J. Alexander and R. L. Klueh, "Specimen Size Effects in Charpy Impact Testing," pp. 179-91 in Charpy Impact Test: Factors and Variables, ASTM STP 1072, J. M. Holt, Ed., American Society for Testing and Materials, Philadelphia, 1990
20. A. S. Kumar, F. A. Garner, and M. L. Hamilton, "Effect of Specimen Size on the Upper Shelf Energy of Ferritic Steels," pp. 487-95 in Effects of Radiation on Materials: 14th International Symposium (Volume II), ASTM STP 1046, N. H. Packan, R. E. Stoller, and A. S. Kumar, Eds., American Society for Testing and Materials, Philadelphia, 1990
21. B. S. Louden, A. S. Kumar, F. A. Garner, M. L. Hamilton, and W. L. Hu, "The Influence of Specimen Size on Charpy Impact Testing of Unirradiated HT-9," J. Nucl. Mater. 155-157, 662-67 (1988).
22. A. S. Kumar, B. S. Louden, F. A. Garner, and M. L. Hamilton, "Recent Improvements in Size Effects Correlations for DBTT and Upper Shelf Energy of Ferritic Steels," pp. 47-61 in Small Specimen Test Techniques Applied to Nuclear Reactor Vessel Thermal Annealing and Plant Life Extension, ASTM STP 1204, W. R. Corwin, F. M. Haggag, and W. L. Server, Eds., American Society for Testing and Materials, Philadelphia, 1993.
23. W. R. Corwin, R. L. Klueh, and J. M. Vitek, "Effect of Specimen Size and Nickel Content on the Impact Properties of 12 Cr-1 MoVW Ferritic Steel," J. Nucl. Mater. 22-123, 343-48 (1984).
24. F. Abe, T. Noda, H. Araki, M. Okada, M. Narui, and H. Kayano, "Effect of Specimen Size on the Ductile-Brittle Transition Behavior and the Fracture Sequence of 9Cr-W Steels," J. Nucl. Mater 150, 292-301 (1987).*
25. E. N. Klausnitzer and G. Hofmann, "Reconstituted Impact Specimens with Small Inserts," pp. 76-90 in Effects of Radiation on Materials: 15th International Symposium, ASTM STP 1125, R. E. Stoller, A. S. Kumar, and D. S. Gelles, Eds., American Society for Testing and Materials, Philadelphia, 1992.
26. N. H. Fahey, "Effects of Variables in Charpy Impact Testing," Materials Research & Standards 1, 872-76 (November 1961)
27. G. E. Lucas, G. R. Odette, J. W. Sheckherd, and M. R. Krishnadev, "Recent Progress in Subsized Charpy Impact Specimen Testing for Fusion Reactor Materials Development," pp. 728-33 in Fusion Technology, Vol. 10, November 1986.
28. A. S. Kumar, S. T. Rosinski, N. S. Cannon, and M. L. Hamilton, "Subsize Specimen Testing of a Nuclear Reactor Pressure Vessel Material," pp 147-55 in Effects of Radiation on Materials: 16th International Symposium, ASTM STP 1175, A. S. Kumar, D. S. Gelles, R. K. Nanstad, and E. A. Little, Eds., American Society for Testing and Materials, Philadelphia, 1993.
29. H. Neuber, Theory of Notch Stresses, Springer, Berlin, 1958
30. R. Sandstrom and Y. Bergstrom, "Relationship Between Charpy V Transition Temperature in Mild Steel and Various Material Parameters," Mat. Sci. 18, 177-86 (1984).
31. T. Naniwa, M. Shibaike, M. Tanaki, H. Tani, H. N. Shiota, and T. Shiraishi, Effects of the Striking Edge Radius on the Charpy Impact Test,"pp 67-80 in Charpy Impact Test: Factors and Variables, ASTM STP 1072, J. M. Holt, Ed., American Society for Testing and Materials, Philadelphia, 1990.
32. R. K. Nanstad and M. A. Sokolov, "Charpy Impact Test Results on Five Materials and NIST Verification Specimens using Instrumented 2-mm and 8-mm Strikers," pp. 111-39 in Pendulum Impact Machines: Procedures and Specimens for Verification. ASTM STP 1248, T. A. Siewert and A. K. Schmieder, Eds., American Society for Testing and Materials, Philadelphia, 1995
33. N. N. Davidenkov, The Problems of Impact in Material Science, Academy of Science of U.S.S.R., 1938 (in Russian).
34. W. Weibull, "A Statistical Theory of the Strength of Materials," p. 151 in Proceedings of the Royal Swedish Institute for Engineering Research, 1939.
35. W. Weibull, "A Survey of 'Statistical Effects' in the Field of Material Failure," Appl. Mech. Rev. 5(11), 449-51 (1952).
36. N. Davidenkov, E. Shevandin, and F. Wittmann, "The Influence of Size on the Brittle Strength of Steel," J. Appl. Mech. 63-67 (March 1947).