Deformation behavior of an Al-3.37 Wt Pct Li alloy

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 27, Issue 8, 1996, Pages 2274-2284

  Thakur, A ^a   Kashyap, B P ^b   Malik, M K ^c  

^a UNIVERSITY OF MANITOBA   (Canada)

^b INDIAN INSTITUTE OF TECHNOLOGY BOMBAY   (India)

^c BHABHA ATOMIC RESEARCH CENTRE   (India)

Author keywords

[No Author keywords available]

Indexed keywords

ACTIVATION ENERGY; CAVITATION; CRACK INITIATION; DEFORMATION; DUCTILITY; FAILURE (MECHANICAL); METAL TESTING; STRAIN RATE; THERMAL EFFECTS; VISCOUS FLOW;

CAVITY INTERLINKAGE; CONSTANT INITIAL STRAIN RATE TEST; DIFFERENTIAL STRAIN RATE TEST;

ALUMINUM ALLOYS;

EID: 0030216998     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02651881     Document Type: Article

References (59)

1. M. Niikura, K. Takahashi, and C. Ouchi: Aluminum-Lithium Alloys III, C. Baker, P.J. Gregson, S.J. Harris, and C.J. Peel, eds., The Institute of Metals, London, 1986, pp. 213-21.
2. W.G. Quist, G.H. Narayanan, and A.L. Wingert: Aluminum-Lithium Alloys II, T.H. Sanders, Jr. and E.A. Starke, Jr., eds., TMS-AIME, Warrendale, PA, 1984, pp. 313-34.
3. E.J. Lavernia and T.S. Srivatson: J. Mater. Sci., 1990, vol. 25, pp. 1137-58.
4. J. Wadsworth, I.G. Palmer, D.D. Crooks, and R.E. Lewis: Aluminum-Lithium Alloys II, T.H. Sanders, Jr. and E.A. Starke, Jr., eds., TMS-AIME, Warrendale, PA, 1984, pp. 111-35.
5. J.H. Hollomon: Met. Technol., Am. Inst. Min. Met. Petrol. Eng., 1946, vol. 13, pp. 1-9.
6. J.J. Jonas: J. Sci. Ind. Res., 1973, vol. 32, pp. 528-35.
7. J.D. Baird: Metall. Rev. No. 149, Met. Mater., 1971, vol. 5, pp. 1-48.
8. A.K. Mukherjee, J.E. Bird, and J.E. Dorn: Trans. ASM, 1969, vol. 62, pp. 155-79.
9. M. Furukawa, Y. Miura, and M. Nemoto: Trans. JIM, 1985, vol. 26, pp. 414-22.
10. K.T. Park, E.J. Lavernia, and F.A. Mohamed: Acta Metall. Mater., 1990, vol. 38, pp. 1837-48.
11. M. Tamura, T. Mori, and T. Nakamura: Trans. JIM, 1973, vol. 14, pp. 355-64.
12. B. Noble, S.J. Harris, and K. Harlow: Aluminum-Lithium Alloys II, T.H. Sanders, Jr. and E.A. Starke, Jr., eds., TMS-AIME, Warrendale, PA, 1984, pp. 65-77.
13. S.M.L. Sastry and J.E. O'Neal: Aluminum-Lithium Alloys II, T.H. Sanders, Jr. and E.A. Starke, Jr., eds., TMS-AIME, Warrendale, PA, 1984, pp. 79-90.
14. T. Takasugi and O. Izumi: Acta Metall., 1985, vol. 33, pp. 39-48.
15. N.S. Stoloff: Int. Mater. Rev., 1989, vol. 34, pp. 153-83.
16. B.P. Kashyap, K. McTaggart, and K. Tangri: Phil. Mag., 1988, vol. 57, pp. 97-114.
17. S.S. Kale and B.P. Kashyap: Scripta Metall. Mater., 1992, vol. 26, pp. 975-79.
18. D.L. Sun, D.Z. Yang, and T.Q. Lei: Mater. Chem. Phys., 1990, vol. 25, pp. 307-13.
19. M. Pridham, B. Noble, and S.J. Harris: Aluminum-Lithium Alloys III, C. Baker, P.J. Gregson, S.J. Harris, and C.J. Peel, eds., The Institute of Metals, London, 1986, pp. 547-54.
20. F. Abe, H. Araki, T. Noda, and K. Kamada: Mater. Sci. Technol., 1990, vol. 6, pp. 829-37.
21. B. Noble and G.E. Thompson: Met. Sci. J., 1971, vol. 5, pp. 114-20.
22. T.H. Courtney: Mechanical Behavior of Materials, McGraw-Hill Publishing Co., Singapore, 1990, pp. 192-94 and 295-309.
23. M. Furukawa, Y. Miura, and M. Nemoto: Trans. JIM, 1985, vol. 26, pp. 225-29.
24. P.J.E. Bischler and J.W. Martin: Aluminum-Lithium Alloys III, C. Baker, P.J. Gregson, S.J. Harris, and C.J. Peel, eds., The Institute of Metals, London, 1986, pp. 539-46.
25. S.C. Jha, T.H. Sanders, Jr., and M.A. Dayananda: Acta Metall., 1987, vol. 35, pp. 473-82.
26. D.B. Williams and J.W. Edington: Met. Sci., 1975, vol. 9, pp. 529-32.
27. O. Jensrud and N. Ryum: Mater. Sci. Eng., 1984, vol. 64, pp. 229-36.
28. E.A. Starke, Jr., T.H. Sanders, Jr., and I.G. Palmer: J. Met., 1981, vol. 33, pp. 24-33.
29. H. Luthy, A.K. Miller, and O.D. Sherby: Acta Metall, 1980, vol. 28, pp. 169-78.
30. W.D. Nix and J.C. Gibeling: Flow and Fracture at Elevated Temperatures, R. Raj, ed., ASM, Metals Park, OH, 1985, pp. 1-63.
31. T.H. Sanders, Jr. and E.A. Starke, Jr.: Acta Metall., 1982, vol. 30, pp. 927-39.
32. B. Noble, S.J. Harris, and K. Dinsdale: Met. Sci. J., 1982, vol. 16, pp. 425-30.
33. D.A. Woodford: Trans. ASM, 1969, vol. 62, pp. 291-93.
34. H.E. Evans: Mechanisms of Creep Fracture, Elsevier Applied Science Publishers Ltd., London, 1984, pp. 294-96.
35. H.C. Rogers: Trans. TMS-AIME, 1960, vol. 218, pp. 498-506.
36. J.R. Rice and D.M. Tracey: J. Mech. Phys. Solids, 1969, vol. 17, pp. 201-17.
37. E.W. Hart: Acta Metall., 1967, vol. 15, pp. 351-55.
38. F.A. Nichols: Acta Metall., 1980, vol. 28, pp. 663-73.
39. B. Baudelet and M. Suery: Superplasticity and Superplastic Forming, C.H. Hamilton and N.B. Paton, eds., TMS-AIME, Warrendale, PA, 1988, pp. 135-48.
40. K.A. Padmanabhan and G.J. Davies: Superplasticity, Springer-Verlag, Berlin, 1980, pp. 25-38.
41. Smithells Metals Reference Book, 6th ed., E.A. Brandes, ed., Butterworth and Co., London, 1983, pp. 13.1-13.97.
42. D.B. Williams: Aluminum-Lithium Alloys V, T.H. Sanders, Jr. and E.A. Starke, Jr., eds., TMS-AIME, Warrendale, 1989, pp. 551-63.
43. J. Cadek: Creep in Metallic Materials, 1st ed., Elsevier, Amsterdam, 1988, pp. 44-59 and 115-59.
44. J. Weertman: Trans. Am. Soc. Met., 1968, vol. 61, pp. 681-94.
45. O.D. Sherby, R.H. Klundt and A.K. Miller: Metall. Trans. A, 1977, vol. 8, pp. 843-50.
46. B.P. Kashyap and A.K. Mukherjee: Mater. Sci. Technol., 1985, vol. 1, pp. 291-96.
47. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill Publishing Co., Singapore, 1988, p. 453.
48. E.A. Starke, Jr. and F.S. Lin: Metall. Trans. A, 1982, vol. 13A, pp. 2259-69.
49. W.X. Feng, F.S. Lin, and E.A. Starke, Jr.: Metall. Trans. A, 1984, vol. 15A, pp. 1209-20.
50. P.J. Gregson and H.M. Flower: Acta Metall., 1985, vol. 33, pp. 527-37.
51. K.V. Jata and E.A. Starke, Jr.: Scripta Metall., 1988, vol. 22, pp. 1553-56.
52. W.S. Miller, M.P. Thomas, D.J. Lloyd, and D. Creber: Aluminum-Lithium Alloys III, C. Baker, P.J. Gregson, S J. Harris, and C.J. Peel, eds., The Institute of Metals, London, 1986, pp. 584-94.
53. S. Suresh, A.K. Vasudevan, M. Tosten, and P.R. Howell: Acta Metall., 1987, vol. 35, pp. 25-46.
54. A.K. Vasudevan and R.D. Doherty: Acta Metall, 1987, vol. 35, pp. 1193-1219.
55. P.J. Meschter, J.E. O'Neal, and R.J. Lederich: Aluminum-Lithium Alloys II, T.H. Sanders, Jr. and E.A. Starke, Jr., eds., TMS-AIME, Warrendale, PA, 1984, pp. 419-31.
56. S. Kumar and H.B. McShane: Scripta Metall. Mater., 1993 vol. 28, pp. 1149-54.
57. J.A. Wagner and R.P. Gangloff: Scripta Metall. Mater., 1992, vol. 26, pp. 1779-84.
58. M.F. Ashby: Surf. Sci., 1972, vol. 31, pp. 498-542.
59. G.H. Narayanan, B.L. Wilson, and W.E. Quist: Aluminum-Lithium Alloys II, T.H. Sanders, Jr. and E.A. Starke, Jr., eds., TMS-AIME, PA, 1984, pp. 517-41.