Electrophoretic deposition (EPD): Mechanisms, kinetics, and application to ceramics

Journal of the American Ceramic Society

Volumn 79, Issue 8, 1996, Pages 1987-2002

  Sarkar, Partho ^a,b,c,d,e,f   Nicholson, Patrick S ^a,b,g,h,i  

^a MCMASTER UNIVERSITY   (Canada)

^b AMERICAN CERAMIC SOCIETY   (United States)

^c GOVERNMENT COLLEGE OF ENGINEERING AND CERAMIC TECHNOLOGY   (India)

^d INDIAN INSTITUTE OF TECHNOLOGY KANPUR   (India)

^e TOKYO METROPOLITAN UNIVERSITY   (Japan)

^f International Joint Research Program

^g International Joint Research Program ^*

^h Canadian University Industry Council

ⁱ Academy of Ceramics

Author keywords

[No Author keywords available]

Indexed keywords

COLLOIDS; ELECTRODEPOSITION; ELECTROPHORESIS; EQUATIONS OF MOTION; MASS TRANSFER; MATHEMATICAL MODELS; PARTICLES (PARTICULATE MATTER); VOLTAGE MEASUREMENT;

CONSTANT CURRENT CONDITIONS; CONSTANT VOLTAGE CONDITIONS; ELECTROPHORETIC DEPOSITION; HAMAKER CONSTANT; MASS BALANCE CONDITIONS; PARTICLE INTERACTION ENERGY; SUSPENSION STABILITY; THREE PROBE DC TECHNIQUE;

CERAMIC MATERIALS;

EID: 0030216430     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.1996.tb08929.x     Document Type: Article

References (130)

1. W. F. Pickard, "Remarks on the Theory of Electrophoretic Deposition," J. Electrochem. Soc., 115. 105C-108C (1968).
2. E. Harsanyi, U.S. Pat. No. 1897 902, 1933.
3. J. Lyklema, "Principles of the Stability of Lyophobic Colloidal in Non-aqueous Media," Adv. Colloid Interface Sci., 2, 65-114 (1968).
4. G. Wang, P. Sarkar, and P. S. Nicholson, "The Influence of pH on the Electrostatic Stability of Alumina Suspensions in Ethanol," submitted to J. Am. Ceram. Soc., (1996).
5. 5 Alcohols and Water on Stability of Dispersions with Alumina and Aluminum Hydroxide," Discuss. Faraday Soc., 42, 232 (1966).
6. D. Y. C. Chan, R. M. Pashley, and L. R. White, "A Simple Algorithm for Calculation of Electrostatic Repulsion between Identical Charged Surfaces in Electrolyte," J. Colloid Interface Sci., 77, 283-85 (1980).
7. B. V. Derjaguin and L. Landau, "Theory of Stability of Highly Charged Lyophobic Sols and Adhesion of Highly Charged Particles in Solutions of Electrolytes," Acta Physicochim. UKSS, 14, 633-52 (1941).
8. E. J. W. Verwey and J. Th. G. Overbeek, Theory of Stability of Lyophobic Colloid. Elsevier, Amsterdam, The Netherlands, 1948.
9. H. C. Hamaker and E. J. W. Verwey, "The Role of the Forces between the Particles in Electrodeposition and Other Phenomena," Trans. Faraday Soc., 36, 180-85 (1940).
10. H. Koelmans and J. Th. G. Overbeek, "Stability and Electrophoretic Deposition of Suspensions in Non-Aqueous Media," Discuss. Faraday Soc., 18, 52-63 (1954).
11. H. Koelman, "Suspensions in Non-Aqueous Media," Philips Res. Rep., 10, 161-93 (1955).
12. F. Grillon, D. Fayeulle, and M. Jeandin, "Quantitative Image Analysis of Electrophoretic Coating," J. Mater. Sci. Lett., 11, 272-75 (1992).
13. M. Shimbo, K. Tanzawa, M. Miyakawa, and T. Emoto, "Electrophoretic Deposition of Glass Powder for Passivation of High-Voltage Transistors," J. Electrochem. Soc., 132, 393-98 (1985).
14. E. Sluzky and K. Hesse, "Electrophoretic Preparation of Phosphor Screens," J. Electrochem. Soc., 136, 2724-27 (1989).
15. J. Mizuguchi, K. Sumi, and T. Muchi, "A Highly Stable Nonaqueous Suspension for Electrophoretic Deposition of Powdered Substances," J. Electrochem. Soc., 130, 1819-25 (1983).
16. 3)," Ceram. Eng. Sci. Proc., 15, 1019-27 (1994).
17. D. R. Brown and F. W. Salt, "The Mechanism of Electrophoretic Deposition," J. Appl. Chem., 15, 40-48 (1963).
18. M. Giersig and P. Mulvaney, "Formation of Ordered Two-Dimensional Gold Colloid Lattices by Electrophoretic Deposition," J. Phys. Chem., 97, 6334-36 (1993).
19. P. Sarkar, X. Huang, and P. S. Nicholson, "Structural Ceramic Microlaminates by Electrophoretic Deposition," J. Am. Ceram. Soc., 75, 2907-909 (1992).
20. P. Sarkar, X. Huang, and P. S. Nicholson, "Zirconia/Alumina Functionally Gradient Composites by Electrophoretic Deposition," J. Am. Ceram. Soc., 76, 1055-56 (1993).
21. H. C. Hamaker, "Formation of Deposition by Electrophoresis," Trans. Faraday Soc., 36, 279-87 (1940).
22. A. Sussman and T. J. Ward, "Electrophoretic Deposition of Coatings from Glass-Isopropanol Slurries," RCA Rev., 42, 178-97 (1981).
23. Y. Hirata, A. Nishimoto, and Y. Ishihara, "Forming of Alumina Powder by Electrophoretic Deposition," J. Ceram. Soc. Jpn., Int. Ed., 99, 108-13 (1991).
24. Z. Zhang, Y. Huang, and Z. Jiang, "Electrophoretic Deposition Forming of SiC-TZP Composites in Nonaqueous Sol Media," J. Am. Ceram. Soc., 77, 1946-49 (1994).
25. P. Sarkar and P. S. Nicholson, "Comment on 'Electrophoretic Deposition Forming of SiC-TZP Composites in a Nonaqueous Sol Media,' " J. Am. Ceram. Soc., 78, 3165-66 (1995).
26. 3"; pp. 271-80 in Ceramic Transactions, Vol. 62, Science, Technology, and Commercialization of Powder Synthesis and Shape Forming Processes. Edited by J. J. Kingsley, C. H. Schilling, and J. H. Adair. American Ceramic Society, Westerville, OH, 1996.
27. Z. Zhang, Y. Huang, and Z. Jiang, "Reply to 'Comment on "Electrophoretic Deposition Forming of SiC-TZP Composites in a Nonaqueous Sol Media," ' " J. Am. Ceram. Soc., 78, 3167-68 (1995).
28. W. Ryan and E. Massoud, "Electrophoretic Deposition Could Speed Up Ceramic Casting," Interceram., 2, 117-19 (1979).
29. M. Mihailescu, M. Emandi, V. Vancea, and M. Marcu, "Electrophoretic Behaviour of Ceramic Sanitary Ware Slips," Interceram., 40, 165-70 (1991).
30. M. S. Chronberg and F. Handle, "Process and Equipment for the Production of Materials by Electrophoresis ELEPHANT," Interceram., 1, 33-34 (1978).
31. J. C. Deschamp, H. Vander Poorten, A. Depellegrin, C. Cazzaro, V. Vandeneede, and X. Y. Xiong, "Préparation, Structure, et Properiétés Mécaniques d'une Céramique Electroformée," Silic. Ind., 55, 41-54 (1990).
32. H. Vander Poorten, V. Moortgat-Hasthorpe, and M. Mercier, "Electrochimite des Barbotines," Silic. Ind., 45, 89-96 (1980).
33. H. Vander Poorten and V. Moortgat-Hasthorpe, "Propriétés Electrochemiques de Diverses Argiles de la Communauté Européenne. Etude Plus Particuliére des Phénoménes Anodiques," Silic. Ind., 52, 13-19 (1987).
34. - iques de Diverses Argiles de la Communauté Européenne. Etude Plus Particuliére des Phénoménes Anodiques," Silic. Ind., 52, 157-61 (1987).
35. H. Vander Poorten and V. Moortgat-Hasthorpe, "Aptitude à l'Electroformage de Diverses Argiles de la Communauté Européenne. Comparaison Avec le Coulage en Moule de Plâtre," Silic. Ind., 53, 109-15 (1988).
36. A. G. Dobrovolsky, "Development of Slip Moulding Methods," Ceram. Int., 3, 159-64 (1977).
37. J. Y. Choudhary, H. S. Ray, and K. N. Rai, "Electrophoretic Deposition of Alumina from Aqueous," Trans. J. Br. Ceram. Soc., 81, 189-93 (1982).
38. D. E. Clark, W. J. Dalzell, and D. C. Folz, "Electrophoretic Alumina Sol-Gel Coating on Metallic Substrates," Ceram. Eng. Sci. Proc., 9, 111 (1988).
39. T. Arato, T. Narisawa, N. Koganezawa, Y. Nonaka, and K. Tochigi, "Characterization of Electrodeposited Gels on the Tungsten Heater Coil," J. Ceram. Soc. Jpn., Int. Ed., 99, 461-66 (1991).
40. T. Narisawa, T. Arato, N. Koganezawa, M. Shibata, and Y. Nonaka, "Formation of Alumina Insulation Films for a CRT Heater by Constant Current Electrophoretic Deposition Method," J. Ceram. Soc. Jpn., Int. Ed., 103, 54-58 (1995).
41. J. M. Andrews, A. H. Collins, D. C. Cornish, and J. Dracass, "The Forming of Ceramic Bodies by Electrophoretic Deposition," Proc. Br. Ceram. Soc., 12, 211-29 (1969).
42. El-Jazairi, D. White, and J. P. Roberts, "On Electrophoretic Deposition of Alumina from Non-Aqueous Suspension"; pp. 46-53 in Science of Ceramics, Vol. 9. Nederlandse Keramisch Vereniging, 1977.
43. F. Harbach, R. Neeff, H. Neinburg, and L. Weiler, "Reliable Ceramic Components from Colloidal Suspensions," Ber. Dtsch. Keram. Ges., 67, 130-35 (1990).
44. M. Boncoeur and S. Carpenter, "Le Formage par Dépôt Électrophorétique," Ind. Ceram. (Faenza, Italy), 648, 79-81 (1972).
45. R. Clasen, "Electrophoretic Deposition of Compacts of Nanosized Particles"; pp. 169-84 in Ceramic Transactions, Vol. 54, Science, Technology, and Applications of Colloidal Suspensions. Edited by J. H. Adair, J. A. Casey, C. A. Randall, and S. Venigalla. American Ceramic Society, Westerville, OH, 1995.
46. H. Nishimori, M. Tatsumisago, and T. Minami, "Dispersity and Size of Silica Particles Constructing Thick Films Prepared by Electrophoretic Sol-Gel," J. Ceram. Soc. Jpn., Int. Ed., 103, 743-45 (1995).
47. H. Nishimori, M. Tatsumisago, and T. Minami, "Preparation of Thick Silica Films by Electrophoretic Sol-Gel Deposition on a Stainless Steel Sheet," J. Ceram. Soc. Jpn., Int. Ed., 103, 78-80 (1995).
48. J. Fally, C. Lasne, Y. Lazennec, Y. Le Cars, and P. Margotin, "Study of a Beta-Alumina Electrolyte for Sodium-Sulfur Battery," J. Electrochem. Soc., 120, 1296-98 (1973).
49. J. H. Kennedy and A. Foissy, "Fabrication of Beta-Alumina Tubes by Electrophoretic Deposition from Suspensions in Dichloromethane," J. Electrochem. Soc., 122, 482-86 (1975).
50. J. H. Kennedy and A. Foissy, "Measurement of Mobility and Zeta Potential of Beta-Alumina Suspensions in Various Solvent," J. Am. Ceram. Soc., 60, 33-36 (1977).
51. R. W. Powers, "The Electrophoretic Forming of Beta-Alumina Ceramic," J. Electrochem. Soc., 122, 490-500 (1975).
52. R. W. Powers, S. P. Mitoff, R. N. King, and J. C. Bielawski, "A Beta-Alumina Fabrication Scheme with Some Special Features," Solid State Ionics, 5, 287-90 (1981).
53. R. W. Powers, "Ceramic Aspects of Forming Beta Alumina by Electrophoretic Deposition," Am. Ceram. Soc. Bull., 65, 1270-77 (1986).
54. A. A. Foissy and G. Robert, "Electrophoretic Forming of Beta-Alumina from Dichloromethane Suspensions," Am. Ceram. Soc. Bull., 61, 251-55 (1982).
55. S. N. Heavens, "Manufacture of Beta-Alumina Shapes by Electrophoretic Deposition," Proc. Br. Ceram. Soc., 38, 119-26 (1986).
56. C. E. Baumgartner, V. J. DeCarlo, P. G. Glugla, and J. Grimaldi, "Molten Carbonate Fuel Cell Electrolyte Structure Fabrication Using Electrophoretic Deposition," J. Electrochem. Soc., 132, 57 (1985).
57. D. U. Krishna Rao and E. C. Subbarao, "Electrophoretic Deposition of Magnesia," Am. Ceram. Soc. Bull., 58, 467-69 (1979).
58. A. I. Avgustinik, V. S. Vigdergauz, and G. I. Zhuravlev, "Electrophoretic Deposition of Ceramic Masses from Suspensions and Calculation of Deposit Yields," J. Appl. Chem. (USSR), 35, 2090-93 (1962).
59. T. Engelhardt, P. Reijnen, L. Hellkuhl, F. Kaup, and H. Warnke, "Physical and Chemical Processes in Electrophoretic Enameling: I," Mitt. Ver. Dtsch. Emailfachleute, 38, 37-45 (1990).
60. T. Engelhardt, P. Reijnen, L. Hellkuhl, F. Kaup, and H. Warnke, "Physical and Chemical Processes in Electrophoretic Enameling: II," Mitt. Ver. Dtsch. Emailfachleute, 38, 60-74 (1990).
61. T. Engelhardt, P. Reijnen, L. Hellkuhl, F. Kaup, and H. Warnke. "Physical and Chemical Processes in Electrophoretic Enameling: III," Mitt. Ver. Dtsch. Emailfachleute, 38, 86-91 (1990).
62. T. Engelhardt, P. Reijnen, L. Hellkuhl, F. Kaup, and H. Warnke, "Physical and Chemical Processes in Electrophoretic Enameling: IV," Mitt, Ver. Dtsch. Emailfachleule, 38, 95-104 (1990).
63. T. Engelhardt, P. Reijnen, L. Hellkuhl, F. Kaup, and H. Warnke, "Physical and Chemical Processes in Electrophoretic Enameling: V," Mitt. Ver. Dtsch. Emailfachleute, 38, 105-109 (1990).
64. T. Engelhardt, P. Reijnen, L. Hellkuhl, F. Kaup, and H. Warnke, "Physical and Chemical Processes in Electrophoretic Enameling: VI," Mitt. Ver. Dtsch. Emailfachleute, 38, 120-24 (1990).
65. H. Hoffman, "Theory and Practice of Electrocoating of Porcelain Enamel," Am. Ceram. Soc. Bull., 57, 605-608 (1978).
66. H. W. Hoffman and T. L. Stalter, "Electrodeposition: Status and Outlook," Ceram. Eng. Sci. Proc., 1, 141-51 (1980).
67. A. Betz and K. O. Helm, "Electroporcelain Enameling," Ceram. Eng. Sci. Proc., 9, 380-85 (1988).
68. P. Sarkar, S. Mathur, P. S. Nicholson, and C. V. Stager, "Fabrication of Textured Bi-Sr-Ca-Cu-O Thick Film by Electrophoretic Deposition," J. Appl. Phys., 69, 1775-77 (1991).
69. c Superconductor Powder by Ultrasonic Aerosol Pyrolysis"; pp. 91-98 in Ceramic Transactions, Vol. 12, Ceramic Powder Science III. Edited by G. L. Messing, S. H. Nagoya, and H. Hausner. American Ceramic Society, Westerville, OH, 1990.
70. y Superconducting Films on Silver Substrates by the Electrophoretic Deposition Technique," J. Mater. Sci. Lett., 12, 1793-94 (1993).
71. S. H. Sin, C. C. Sorrel, and S. X. Dou. "Electrophoretic Deposition and Properties of Bi-Pb-Sr-Ca-Cu-O Superconducting Ceramic-Metal Tapes"; pp. 675-82 in Proceedings of the International Ceramics Conference, Vol. 2. Edited by M. J. Bannister. Australian Ceramic Society, Sydney, Australia, 1992.
72. 7-y Superconducting , Coatings by Electrophoretic Deposition," Appl. Phys. Lett., 55, 492-94 (1989).
73. 7-y Layers Prepared by Electrophoretic Deposition," J. Electrochem. Soc., 138, 2942-46 (1991).
74. 7-y, Superconducting Films on Cu Substrates by Electrophoretic Deposition," Jpn. J. Appl. Phys., 30, L1166-L1168 (1991).
75. 7-x Thick Films," Physica C (Amsterdam), 162-164, 111-12 (1989).
76. 7-x Films on Silver Substrates," J. Appl. Phys., 66, 5940-43 (1989).
77. x," Appl. Phys. Lett., 61, 492-94 (1992).
78. c Superconductor Coating on Metal Substrates by an Electrophoretic Technique," J. Am. Ceram. Soc., 72, 1733-35 (1989).
79. D. Bhattacharya, S. N. Roy, R. N. Basu, A. Das Sharma, and H. S. Maiti, "Critical Current in Electrophoretically Deposited Thick Films of YBCO Superconductor," Mater. Lett., 16, 337-41 (1993).
80. A. Das Sharma, A. Sen, and H. S. Maiti, "Effectiveness of Various Suspension Media for Electrophoretic Deposition of YBCO Superconductor Powder," Ceram. Int., 19, 65-70 (1993).
81. H. Nojima, M. Nagata, H. Shintaku, and M. Koba, "Fabrication of Y-Ba-Cu-O Superconducting Films on Cu Substrates by an Electrophoretic Deposition Technique," Jpn. J. Appl. Phys., 29, L-1655-L-1658 (1990).
82. L. D. Woolf, W. A. Raggio, F. E. Elsner, M. V. Fisher, R. B. Stephens, T. L. Figueroa, C. H. Shearer, J. D. Rose, K. M. Schaubel, R. D. Olstad, T. Ohkawa, D. M. Duggan, M. Dimartino, and R. L. Fagaly, "Continuous Fabrication of High-Temperature Superconductor Coated Metal Fiber and Multifilamentary Wire," Appl. Phys. Lett., 58, 534-36 (1991).
83. H. A. Fisch, "Electrophoretic Deposition of Aluminide Coatings from Aqueous Suspension," J. Electrochem. Soc., 119, 57-64 (1972).
84. C. Hirayama and D. Berg, "Studies on the Electrophoretic Deposition of Mica," Electrochem. Technol., 1, 224-27 (1963).
85. J. J. Shyne and H. G. Scheible, "Electrophoretic Coatings"; pp. 715-30 in Modern Electroplating. Edited by F. A. Lowenheim. Wiley, New York, 1963.
86. M. Benjamin and A. B. Osborn, "The Deposition of Oxide Coatings by Cataphoresis," Trans. Faraday Soc., 36, 287-95 (1940).
87. C. G. A. Hill, P. E. Levering, and A. L. G. Rees, "Electrophoretic Deposition of Powdered Materials from Non-Aqueous Suspensions," Trans. Faraday Soc., 43, 407-17 (1947).
88. T. Ishihara, K. Sato, Y. Mizuhara, and Y. Takita, "Preparation of Yttria-Stabilized Zirconia Films for Solid Oxide Fuel Cells by Electrophoretic Deposition Method," Chem. Lett., 943-46 (1992).
89. T. Ishihara, T. Kudo, H. Matsuda, Y. Mizuhera, and Y. Takia, "Electrophoretic Deposition of Stabilized Zirconia for Solid Oxide Fuel Cells"; pp. 65-73 in Proceedings of 3rd International Symposium on Solid Oxide Fuel Cells, Vol. 93-4. Edited by S. C. Singhal and H. Iwahara. The Electrochemical Society, Princeton, NJ, 1993.
90. M. Barraclough, N. E. Bolton, A. H. Collins, and J. M. Andrews, "Electrophoretic Deposition of Ferrite for Computer Stores," IEEE Trans. Magn., MAG-3, 531-34 (1967).
91. V. A. Lamb and H. I. Salmon, "Electrophoretic Deposits of Barium Titanate," Am. Ceram. Soc. Bull., 41, 781-82 (1962).
92. M. Nagai, K. Yamashita, T. Umegaki, and Y. Takuma, "Electrophoretic Deposition of Ferroelectric Barium Titanate Thick Films and Their Dielectric Properties," J. Am. Ceram. Soc., 76, 253-55 (1993).
93. 3 Films by Electrophoretic Deposition," Jpn. J. Appl. Phys., 32, 4182-85 (1993).
94. 2 Films by Multiple Electrophoretic Deposition/Sintering Processing," Jpn. J. Appl. Phys., 30, 2170-73 (1991).
95. L. C. Scala and J. E. Sandor, "Electrophoretic Process for the Controlled Deposition of Boron Diffusion Sources on Silicon," Electrochem. Technol., 6, 434-38 (1968).
96. P. F. Grosso, R. E. Rutherford, and D. E. Sargent, "Electrophoretic Deposition of Luminescent Materials," J. Electrochem. Soc., 117, 1456-59 (1970).
97. J. A. Siracuse, J. Talbot, E. Sluzky, and K. R. Hesse, "The Adhesive Agent in Cataphoretically Coated Phosphor Screens," J. Electrochem. Soc., 137, 346-48 (1990).
98. J. A. Siracuse, J. B. Talbot, E. Sluzky, T. Avalos, and K. R. Hesse, "Cataphoretic Deposition of Phosphor," J. Electrochem. Soc., 137, 2336-40 (1990).
99. M. J. Shane, J. B. Talbot, R. D. Schreiber, C. L. Ross, E. Sluzky, and K. R. Hesse, "Electrophoretic Deposition of Phosphors I. Conductivity and Zeta Potential Measurement," J. Colloid Interface Sci., 165, 325-33 (1994).
100. M. J. Shane, J. B. Talbot, B. G. Kinney, E. Sluzky, and K. R. Hesse, "Electrophoretic Deposition of Phosphors II. Deposition Experiments and Analysis," J. Colloid Interface Sci., 165, 334-40 (1994).
101. Y. Ueno, H. Minoura, T. Nishikawa, and M. Tsuiki, "Electrophoretic Deposited CdS and CdSe Anodes for Photoelectrochemical Cells," J. Electrochem. Soc., 130, 43-47 (1981).
102. K. Kuwabara, K. Sugiyama, and M. Ohno, "All-Solid State Electrochromic Device. 1. Electrophoretic Deposition Film of Proton Conductive Solid Electrolyte," Solid State Ionics, 44, 313-18 (1991).
103. K. Kuwabara and Y. Noda, "Electrophoretic Preparation of Antimonic Acid Film," J. Mater. Sci., 28, 5257-61 (1993).
104. A. Ramasamy, M. K. Totlani, and P. S. Ramanathan, "Electrophoretic Deposition of NiO from Suspension in n-Butanol," J. Electrochem. Soc. India, 32, 113-20 (1983).
105. C. P. Gutierrez, J. R. Mosely, and T. C. Wallace, "Electrophoretic Deposition: A Versatile Coating Method," J. Electrochem. Soc., 109, 923-27 (1962).
106. F. Pearlstein, R. Wick, and A. Gallaccio, "Electrophoretic Deposition of Metals," J. Electrochem. Soc., 110, 843-47 (1963).
107. M. Giersig and P. Mulvaney, "Preparation of Ordered Colloid Monolayers by Electrophoretic Deposition," Langmuir, 9, 3408-13 (1993).
108. M. Trau, D. A. Saville, and I. A. Aksay, "Field-Induced Two- and Three-Dimensional Colloidal Nanostructures"; p. 25 in American Ceramic Society Fall Meeting 1995 Abstracts, Paper No. 60a-B-95F.
109. T. Ducheyne, W. Van Raemdonck, J. C. Heughebaert, and M. Heughebaert, "Structural Analysis of Hydroxyapatite Coating on Titanium," Biomaterials, 7, 97-103 (1986).
110. P. Ducheyne, S. Radin, M. Heughebaert, and J. C. Heughebaert, "Calcium Phosphate Ceramic Coatings on Porous Titanium: Effect of Structure and Composition on Electrophoretic Deposition, Vacuum Sintering, and in Vitro Dissolution," Biomaterials, 11, 244-54 (1990).
111. T. Umegaki, Y. Hisano, K. Yamashita, and T. Kanazawa, Gypsum Lime, 215, 24-28 (1989); (CA 110:236119m).
112. C. H. Kaps. "Electrophoretische Abscheidung und Reaktive Verfestigung von Fluoapatit-Haltigen Bioglaskeramic-Schichten auf Titanium-Implantaten," Keram. Z., 45, 147-52 (1993).
113. C. Kawai, S. Wakamatsu, S. Sakagami, and T. Nomura, "Fabrication of Continuous Fibre-Reinforced SiC Matrix Composites with Gradient Compositions," J. Mater. Sci. Lett., 12, 1156-59 (1993).
114. 3 Micro-Laminate Ceramic/Ceramic Composites," J. Mater. Sci., 28, 6274-78 (1993).
115. 3, Micro-Laminate Ceramic/Ceramic Composites," Ceram. Eng. Sci. Proc., 14, 707-26 (1993).
116. 2O-Based Ceramic Composites ≥1300°C by Electrophoretic Deposition"; pp. 503-16 in Zirconia V. Edited by S. P. S. Badwall, M. J. Bannister, and R. H. J. Hannink. Technomic, Lancaster, PA, 1993.
117. P. Sarkar, O. Prakash, and P. S. Nicholson, "Electrophoretic Deposition to Synthesize Advanced Ceramic/Ceramic Laminar Composites"; pp. 39-46 in Ceramic Transactions, Vol. 38, Advances in Ceramic-Matrix Composites. Edited by N. P. Bansal. American Ceramic Society, Westerville, OH, 1994.
118. 3 Fiber Electrodes," Ceram. Eng. Sci. Proc., 15 [5] 1110-11 (1994).
119. O. Prakash, M. Bissinger, P. Sarkar, and P. S. Nicholson, "Mimicking Nature's Mollusks: Ceramic/Ceramic Laminates with Porous Interlayers," J. Am. Ceram. Soc.. in review.
120. O. Prakash, P. Sarkar, and P. S. Nicholson, "Crack Deflection in Ceramic/ Ceramic Laminates with Strong Interfaces," J. Am. Ceram. Soc., 78, 1125-27 (1995).
121. 3 Lamellar Composites," Fatigue Fract. Eng. Mater. Struct., 18, 897-904 (1995).
122. P. Sarkar and P. S. Nicholson, "Functionally Graded Ceramic/Ceramic and Metal/Ceramic Composites by Electrophoretic Deposition"; in Special Issue of Composites Engineering on Use of Composites in Multi-Phase and Functionally Graded Materials. Edited by M. J. Pindera, J. Aboudi, and A. M. Glaeser.
123. R. Fischer, E. Fischer, G. De Portu, and E. Roncar, "Preparation of Ceramic Micro-Laminates by Electrophoresis in Aqueous System," J. Mater. Sci. Lett., 14, 25-27 (1995).
124. M. S. Sandlin, D. P. Butt, and J. J. Petrovic, "Laminated and Functionally Graded Microstructures by Electrophoretic Deposition"; p. 34 in American Ceramic Society Fall Meeting 1995 Abstracts, Paper No. 80-B-95F.
125. T. J. Illston, C. B. Ponton, P. M. Marquis, and E. G. Butler, "Electrophoretic Deposition of Silica/Alumina Colloids for the Manufacture of CMCs," Ceram. Eng. Sci. Proc., 15 [5] 1052-59 (1994).
126. A. R. Boccaccini and C. B. Ponton, "Processing Ceramic-Matrix Composites Using Electrophoretic Deposition," JOM, [Oct] 34-37 (1995).
127. W. J. Dalzell and D. E. Clark, "Thermophoretic and Electrophoretic Deposition of Sol-Gel Composite Coatings," Ceram. Eng. Sci. Proc., 7, 1014-26 (1986).
128. 3-SiC Composite," Mater. Chem. Phys., 40, 285-90 (1995).
129. S. Haber and L. Gal-or, "Deep Electrophoretic Penetration and Deposition of Ceramic Particles Inside Porous Substrates. I. Analytical Model," J. Electrochem. Soc., 139, 1071-77 (1992).
130. L. Gal-or, S. Liubovich, and S. Haber, "Deep Electrophoretic Penetration and Deposition of Ceramic Particles Inside Porous Substrates. II. Experimental Model," J. Electrochem. Soc., 139, 1078-81 (1992).