Microstructure and tensile behavior of nitrogen-alloyed, dual-phase stainless steels

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 27, Issue 7, 1996, Pages 1845-1859

  Berns, H ^a   Kleff, J ^b   Krauss, G ^c   Foley, R P ^d  

^a RUHR UNIVERSITY BOCHUM   (Germany)

^b ZF FRIEDRICHSHAFEN AG   (Germany)

^c Department of Geology and Geological Engineering   (United States)

^d ILLINOIS INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOYING; ANNEALING; ELECTROSLAG REMELTING; FERRITE; HARDNESS; MARTENSITE; MICROSTRUCTURE; NITROGEN; QUENCHING; TENSILE STRENGTH; TRANSMISSION ELECTRON MICROSCOPY; VOLUME FRACTION;

FRACTURE MODE TRANSITION; MICROPROBE ANALYSIS; MICROVOID COALESCENCE; TRANSGRANULAR CLEAVAGE;

STAINLESS STEEL;

EID: 0030195211     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02651934     Document Type: Article

References (43)

1. H. Berns: Steel Res., 1992, vol. 63 (8), pp. 343-47.
2. H. Berns: Z Metallkd., 1995, vol. 86 (3), pp. 156-63.
3. J. Lueg: Ph.D. Thesis, Ruhr-Universitaet Bochum, VDI-Verlag, Duesseldorf, 1990, vol. 5 (188).
4. J.C. Rawers, J.S. Dunning, G. Asai, and R.P. Reed: Metall. Trans. A, 1992, vol. 23A, pp. 2061-68.
5. A.H. Satir-Kolorz: Ph.D. Thesis, ETH, Zuerich, Switzerland, 1989.
6. H. Schenk, M.G. Frohberg, and F. Reinders: Stahl Eisen, 1963, vol. 83 (2), pp. 93-99.
7. G. Stein, J. Menzel, and H. Doerr: High Nitrogen Steel 88, Conf. Proc. HNS-88, Lille, France, May 18-20, 1988,
8. H. Foct, ed., Institute of Metals, London, 1989, pp. 32-38.
9. H. Berns and G. Wang: High Nitrogen Steels 90, Conf. Proc. HNS-90, Aachen, Germany, Oct. 10-12, 1990, G. Stein and H. Witulski, eds., Verlag Stahleisen, Duesseldorf, pp. 332-37.
10. D.K. Matlock, F. Zia-Ebrahimi, and G. Krauss: 1982 ASM Material Science Seminar on Deformation, Processing, and Structure, Conf. Proc., St. Louis, MO, Oct. 23-24, 1982, ASM, Metals Park, OH, 1983, pp. 47-87.
11. R.D. Lawson, D.K. Matlock, and G. Krauss: AIME Symp. on Fundamentals of Dual-Phase Steels, Conf. Proc., Chicago, IL, Feb. 1981, R.A. Kot and D.L. Bramfitt, eds., AIME, New York, NY, pp. 347-81.
12. L.F. Ramos, D.K. Matlock, and G. Krauss: Metall. Trans. A, 1979, vol. 10A, pp. 259-61.
13. O. Maid, W. Dahl, C. Strassburger, and W. Mueschenbom: Stahl Eisen, 1988, vol. 108 (8), pp. 355-64.
14. O. Maid, W. Dahl, C. Strassburger, and W. Mueschenborn: Stahl Eisen, 1988, vol. 108 (8), pp. 365-70.
15. A.K. Panda, D.S. Sarma, and R.I. Ganguly: Steel Res., 1993, vol. 64 (10), pp. 513-16.
16. J. Beckcr, E. Hombogen, and F. Wendl: Z. Metallkd., 1981, vol. 72, pp. 89-100.
17. N.K. Balliger and T. Gladman: Met. Sci., 1981, Mar., pp. 95-108.
18. N.J. Kim and G. Thomas: Metall. Trans. A, 1981, vol. 12A, pp. 483-89.
19. Y.L. Su and J. Gurland: Mater. Sci. Eng., 1987, vol. 95, pp. 151-65.
20. P. Uggowitzer and H.P. Stuewe: Mater. Sci. Eng., 1982, vol. 55, pp. 181-89.
21. G.R. Speich and R.L. Miller: in Structure and Properties of Dual-Phase-Steel, R.A. Kot and J.M. Morris, eds., TMS-AIME, Warrendale, PA, 1979, pp. 145-82.
22. A.M. Sarosiek and W.S. Owen: Mater. Sci. Eng., 1984, vol. 66, pp. 13-34.
23. T. Sakaki, K. Sugimoto, and T. Fukuzato: Acta Metall., 1983, vol. 31 (10), pp. 1737-46.
24. W.R. Cribb and J.M. Rigsbee: in Structure and Properties of Dual-Phase-Steel, R.A. Kot and J.M. Morris, eds., TMS-AIME, Warrendale, PA, 1979, pp. 91-117.
25. A.F. Szewczyk and J. Gurland: Metall. Trans. A, 1982, vol. 13A, pp. 1821-26.
26. G.R. Speich, V.A. Demarest, and R.L. Miller: Metall. Trans. A, 1981, vol. 12A, pp. 1419-28.
27. P. Uggowitzer and H.P. Stuewe: Mater. Sci. Eng., 1982, vol. 55, pp. 181-89.
28. X.L. Cai, A.J. Garrat-Reed, and W.S. Owen: Metall. Trans. A, 1985, vol. 16A, pp. 543-57.
29. C.L. Garcia and A.J. DeArdo: Metall. Trans. A, 1981, vol. 12A, pp. 521-30.
30. F.B. Pickering: in High Nitrogen Steel 88, Conf. Proc. HNS-88, Lille, France, May 18-20, 1988, H. Foct, ed., Institute of Metals, London, 1989, pp. 10-31.
31. G.P. Negoda, G.M. Grigorgenko, D.P. Novikova, and V.Yu. Orlovsky: in High Nitrogen Steels 90, Conf. Proc. HNS-90, Aachen, Germany, Oct. 10-12, 1990, G. Stein and H. Witulski, eds., Verlag Stahleisen, Duesseldorf, pp. 123-27.
32. H. Leda: in High Nitrogen Steel 88, Conf. Proc. HNS-88, Lille, France, May 18-20, 1988, H. Foct, ed., Institute of Metals, London, 1989, pp. 313-17.
33. F. Vandershaeve, R. Taillard and J. Foct: Steel Res., 1993, vol. 64 (4), pp. 221-27.
34. H. Berns, S.N. Bugajchuk, V.A. Duz, R. Ehrhardt, V.G. Gavriljuk, Y.N. Petrov, and I.A. Yakubzov: Steel Res., 1994, vol. 65 (10), pp. 444-50.
35. B.R. Anthamatten, P.J. Uggowitzer, M.L. Cui, M.O. Speidel, and G. Stein: in High Nitrogen Steel 88, Conf. Proc. HNS-88, Lille, France, May 18-20, 1988, H. Foct, ed., Institute of Metals, London, 1989, pp. 58-62.
36. D.Z. Yang, E.L. Brown, D.K. Matlock, and G. Krauss: Metall. Trans. A, 1985, vol. 16A, pp. 1385-92.
37. H. Berns, R. Ehrhardt, and S. Siebert: Mat.-wiss. u. Werkstofftech., 27 (1996) pp. 25-36.
38. Y. Sawada, P.P. Foley, S.W. Thompson, and G. Krauss: in 35th MWSP, Conf. Proc., ISS-AIME, Warrendale, PA, 1994, vol. 31, pp. 263-86.
39. P.T. Purtscher, Y.W. Cheng, and R.P. Foley: in 36th MWSP, Conf. Proc., ISS-AIME, Warrendale, PA, 1995, vol. 32, pp. 279-86.
40. H. Fischmeister and B. Karlsson: Z. Metallkd., 1977, vol. 68 (5), pp. 311-27.
41. J. Lian, Z. Jiang, and J. Liu: Mater. Sci. Eng., 1991, vol. A147, pp. 55-65.
42. P. Uggowitzer and H.P. Stuewe: Z. Metallkd., 1982, vol. 73 (5), pp. 277-85.
43. C.L. Magee and R.G. Davies: in Alloys for the Eighties, R.Q. Barr, ed., Climax Molybdenum Company, Greenwich, CT, 1981, pp. 25-35.