A new low-reynolds-number k-ϵ model for turbulent flow over smooth and rough surfaces

Journal of Fluids Engineering, Transactions of the ASME

Volumn 118, Issue 2, 1996, Pages 255-259

  Zhang, Hanzhong ^a   Faghri, Mohammad ^b   White, Frank M ^b  

^a TSI INCORPORATED   (United States)

^b University of Rhode Island   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ENERGY DISSIPATION; FRICTION; MATHEMATICAL MODELS; REYNOLDS NUMBER; SURFACE ROUGHNESS;

EQUIVALENT SAND GRAIN ROUGHNESS; LOG LAW VELOCITY PROFILE;

TURBULENT FLOW;

EID: 0030172852     PISSN: 00982202     EISSN: 1528901X     Source Type: Journal    
DOI: 10.1115/1.2817371     Document Type: Article

References (33)

1. Bandyopadhyay, P. R., 1987, -Rough-wall Turbulent Boundary Layers in the Transition Regime,— Journal of Fluid Mechanics, Vol. 180, TiX-ldf.
2. Chien, K.-Y., 1982, -Predictions of Channel and Boundary-Layer Flows with a Low-Reynolds-Number Turbulence Model,— AJAA Journal, Vol. 20, pp. 33-38.
3. Colebrook, C. F., 1939, -Turbulent Flow in Pipes with Particular Reference to the Transition Region between the Smooth and Rough Pipes Laws,— The Journal of the institution of Civil Engineers, Vol. 11, pp. 133-156.
4. Colebrook, C. F., White, C. M., 1937, -Experiments with Fluid Motion in Roughened Pipes,— Proceedings of the Royal Society of London, Series A, Vol. 161, 367-381.
5. Coles, D., 1978, -A Model for Flow in the Viscous Sublayer,— Proceedings of the Workshop on Coherent Structure of Turbulent Boundary Layers, Lehigh IJniversity, Bethlehem, Pa.
6. Dutoya, D., Michard, P., 1981, -A Program for Calculating Boundary Layers along Compressor and Turbine Blades,— Numerical Methods in Heat Transfer, R. W. Lewis, K. Morgan, and O. C. Zienkiewicz, eds., Wiley, New York.
7. El Telbany, M. M. M., Reynolds, A. J., 1981, -Turbulence in Plane Channel Flows,— Journal of Fluid Mechanics, Vol. HI, pp. 283-318.
8. Gessner, F. B., and Emery, A. F., 1981, -The Numerical Predictions of Developing Turbulent Flow in Rectangular Ducts,— ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 103, pp. 445-455.
9. Hamm, F. R., 1954, -Boundary-layer Characteristics for Smooth and Rough Surfaces,— Transactions. The Society of Naval Architects and Marine Engineers, Vol. 62, pp. 333-358.
10. Hartnett, J. P., Koh, J. C. Y., McComas, S. T., 1962, -A Comparison of Predicted and Measured Friction Factors for Turbulent Flow Through Rectangular Ducts,— ASME Journal of Heat Transfer, Vol. 84, pp. 82-88.
11. Hassid, S., Poreh, M., 1978, -A Turbulent Energy Dissipation Model for Flows with Drag Reduction,— ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 100, pp. 107-112.
12. Hoffmann, G. H., 1975, -Improved Form of the Low-Reynolds Number k-e-Turbulence Model,— Physics of Fluids, Vol. 18, pp. 309-312.
13. Krogstad, P., 1991, -Modification of the van Driest Damping Function to Include the Effects of Surface Roughness,— AIAA Journal, Vol. 29, No. 6, pp. 888-894.
14. Lam, C. K. G., and Bremhorst, K., 1981, -A Modified Form of the k-c Model for Predicting Wall Turbulence,— ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 103, pp. 456-460.
15. Laufer, J., 1954, -The Structure of Turbulence in Fully Developed Pipe Flow,— NACA Report 1174.
16. Launder, B. E., and Spalding, D. B., 1974, -The Numerical Computation of Turbulent Flows,— Computer Methods in Applied Mechanics and Engineering, Vol. 3, pp. 269-289.
17. Launder, B. E., Sharma, B. I., 1974, -Application of the Energy-Dissipation Model of Turbulence to the Calculation of Flow Near a Spinning Disc,— Letters in Heat and Mass Transfer, Vol. 1, pp. 131-138.
18. Lund, E. G., 1977, -Mean Flow and Turbulence Characteristics in the Near Corner Region of a Square Duct,— M.S. Thesis, Department of Mechanical Engineering, University of Washington.
19. Myong, H. K., and Kobayashi, T., 1991, -Prediction of Three-dimensional Developing Turbulent Flow in a Square Duct With an Anisotropic Low-Reynolds-Number k-e Model,— ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 132, pp. 608-615.
20. Nagano, Y., and Hishida, M., 1987, -Improved Form of the k-e Model for Wall Turbulent Shear Flows,— ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 109, pp. 156-160.
21. Patankar, S. V., 1980, Numerical Heat Transfer and Fluid Flow, McGraw-Hill.
22. Patankar, S. V., and Spalding, D. B., 1972, -A Calculation Procedure for Heat, Mass and Momentum Transfer in Three-dimensional Parabolic Flows,— International Journal of Heat and Mass Transfer, Vol. 15, pp. 1787-1806.
23. Patel, V. C., Rodi, W., and Scheuerer, G., 1985, -Turbulence Models for Near-Wall and Low Reynolds Number Flows: A Review,— AIAA Journal, Vol. 23, pp. 1308-1319.
24. Prandtl, L., Schlichting, H., 1934, -Das Wiederstandagesetz rouher Platten,— Werft Reederere Hafen, Vol. 15, pp. 1-4.
25. Reynolds, W. C., 1976, -Computation of Turbulent Flows,— Annual Review of Fluid Mechanics, Vol. 8, pp. 183-208.
26. Schlichting, H., 1936, -Experimentelle Untersuchungen zum Rauhigkeits-problem,— Ingenieur-Archiv, Vol. 7, No. 1, pp. 1-34, (Also -Experimental Investigation of the Problem of Surface Roughness,— NACA TM 823).
27. Tarada, F., 1990, -Prediction of Rough-wall Boundary Layers Using a Low Reynolds Number k-c Model,— International Journal of Heat and Fluid Flow, Vol. 11, No. 4, pp. 331-345.
28. Taylor, R. P., Coleman, H. W., and Hodge, B. K., 1985, -Prediction of Turbulent Rough-wall Skin Friction Using a Discrete Element Approach,— ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 107, pp. 251-257.
29. Taylor, R. P., Scaggs, W. F., and Coleman, H. W., 1988, -Measurement and Prediction of the Effects of Nonuniform Surface Roughness on Turbulent Flow Friction Coefficients,— ASME JOURNAL OF FLUIDS ENGINEERING, Vol. 110, pp. 380-384.
30. Van Driest, E. R., 1956, -On Turbulent Flow Near a Wall,— Journal of Aerospace Science, Vol. 23, pp. 1007-1011.
31. Von Karman, 1934, -Turbulence and Skin Friction,— Journal of Aerospace Science, Vol. 7, pp. 1-20.
32. White, F. M., 1991, Viscous Fluid Flow, 2nd Edition, McGraw-Hill, pp. 411-417.
33. Zhang, H., 1993, -Study of a Numerical Turbulence Model for Flow Past Smooth and Rough Surfaces,— Ph.D. thesis, Department of Mechanical Engineering, University of Rhode Island.