Well-founded selection of materials for improved wear resistance

Wear

Volumn 194, Issue 1-2, 1996, Pages 238-245

  Fischer, A ^a  

^a Res Ctr Neumunster NU TECH GmbH   (Germany)

Author keywords

Materials selection; Wear mechanisms; Wear resistance

Indexed keywords

FAILURE ANALYSIS; METALS; STRESSES; TRIBOLOGY; WEAR OF MATERIALS;

MATERIALS SELECTION; THREE BODY ABRASION; TRIBOLOGICAL STRESSES; TWO BODY ABRASION; WEAR MECHANISM; WEAR RESISTANT MATERIALS;

WEAR RESISTANCE;

MATERIALS SELECTION; TRIBOLOGY; WEAR RESISTANCE;

EID: 0030159382     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/0043-1648(95)06738-8     Document Type: Article

References (35)

1. H. Czichos, Tribology - A Systems Approach to the Science and Technology of Friction, Lubrication and Wear, Tribol. Ser., 1, Elsevier Science Publishers, Amsterdam, 1977, pp. 1ff.
2. DIN 50320, Verschleiß, Begriffe, Systemanalyse von Verschleißvorgängen, Gliederung des Verschleißgebietes, Beuth-Verlag, 1000 Berlin 30, 1979, pp. 1-8.
3. H. Czichos, Introduction to Friction and Wear, in K. Friedrich (ed.), Friction and Wear of Polymer Composites, Composite Mater. Ser., 1, Elsevier, Amsterdam, 1986, pp. 1-23.
4. J. Muscara and M.J. Sinnot, Construction and evaluation of a versatile abrasive wear testing apparatus, Met. Eng. Quarterly, 12 (2) (1972) 21-32.
5. A. Misra and I. Finnie, Some observations on two-body abrasive wear, Wear, 68 (1981) 41-56.
6. R. Blickensderfer and I.I. Laird, A pin-on-drum abrasive wear test and comparison with other pin tests, J. Testing Evaluation, 11 (1988) 516-526
7. E. Rabinowicz, L.A, Dunn and P.G. Russell, A study of abrasive wear under three-body condition, Wear, 4 (1961) 245-255
8. H. Uetz and J. Föhl, Gleitverschleißuntersuchungen an metallen und nichtmetallischen hartstoffen unter wirkung körniger medien, Braunkohle, 21 (1969) 10-18.
9. O. Pigors, abrasivverschleißverhalten von stählen bei gleit- und wälzbewegung, Schmierungstechn., 10 (9) (1979) 270-272.
10. A. Misra and I. Finnie, A classification of three-body abrasive wear and design of a new tester, Wear, 60 (1980) 111-121.
11. T. Sasada, N. Emori and M. Oike, in K.C. Ludema (ed.), The effect of abrasive grain size on the transition between abrasive and adhesive wear., Proc. Conf. Wear of Materials 1983, 11-14 April 1983, Reston, VA, USA, ASME, 345 East 47th Street, New York, NY 10017, 1983, pp. 26-31.
12. A. Fischer and C. van Nguyen, New boride containing, hardenable tool materials for Fe-base PM-composits with graded structures, Proc. Conf. PM 1990, PM into the 1990s, 2-6 July 1990, London, Institute of Metals, London, ,1990, pp. 257-265.
13. H. Berns and A. Fischer, Abrasive wear resistance and microstructure of Fe-Cr-C-B hard surfacing weld deposits, in K.C. Ludema (ed.), Wear of Materials 1985, Proc. Conf. April 1985, Vancouver, BC, ASME, New York, 1985, pp. 625-633; Wear, 112 (1986) 163-180.
14. H. Berns and A. Fischer, Abrasive wear resistance and microstructure of Fe-Cr-C-B hard surfacing weld deposits, in K.C. Ludema (ed.), Wear of Materials 1985, Proc. Conf. April 1985, Vancouver, BC, ASME, New York, 1985, pp. 625-633; Wear, 112 (1986) 163-180.
15. H. Berns and A. Fischer, New abrasion resistant alloys, Proc. Conf. Tribology - Friction, Lubrication, and Wear, Fifty Years On, 1-3 July 1987, London, IMechE Publ. Ltd., P.O. Box 24, Northgate Ave., Bury St. Edmunds, Suffolk IP32 6BW, UK, 1987, pp. 603-608.
16. A. Fischer, Mechanisms of high temperature sliding abrasion, in K.C. Ludema (ed.), Proc. Conf. Wear of Materials 91, 7.-11.4.1991, Orlando, FL ASME, New York, 1991, pp. 301-306; Wear, 152 (1992) 151-159.
17. A. Fischer, Mechanisms of high temperature sliding abrasion, in K.C. Ludema (ed.), Proc. Conf. Wear of Materials 91, 7.-11.4.1991, Orlando, FL ASME, New York, 1991, pp. 301-306; Wear, 152 (1992) 151-159.
18. K.-H. Zum Gahr, Micro structure and Wear of Materials, Tribol. Ser., 10, Elesevier, Amsterdam, 1987, pp. 1ff.
19. P.L. Hurricks, Some metallurgical factors controlling the adhesive and abrasive wear resistance of steels, Wear, 26 (1973) 285-304.
20. D. Mewes, Einfluß der relativen anteile von mikrospanen zu mikropflügen auf den abrasiven verschleiß duktiler metalle, Diss. GH-Siegen, 1986; VDI-Fortschr. Ber. VDI-Z, 5(101) (1986) 1.
21. D. Mewes, Einfluß der relativen anteile von mikrospanen zu mikropflügen auf den abrasiven verschleiß duktiler metalle, Diss. GH-Siegen, 1986; VDI-Fortschr. Ber. VDI-Z, 5(101) (1986) 1.
22. B. Lamy, Effect of brittleness index and sliding speed on the morphology of surface scratching in abrasive or erosive processes, Tribology Int., (1984) 35-38.
23. J. Larsen-Basse, Effects of hardness and local fracture toughness on the abrasive wear of WC-Co alloys, Proc. Conf. Tribology - Friction, Lubrication, and Wear, Fifty Years On, 1-3 July 1987, London, IMechE Publ. Ltd., P.O. Box 24, Northgate Ave., Bury St. Edmunds, Suffolk IP32 6BW, UK, 1987, pp. 277-282.
24. M.A. Moore and F.S. King, Abrasive wear of brittle solids, Wear, 60 (1980) 123-140.
25. H. Berns and A. Fischer, Tribological stability of metallic materials at elevated temperatures, Wear, 162-164 (1993) 441-449.
26. S. Soemantrie, The mechanisms of two- and three-body abrasive wear in ductile metals, Ph.D. Thesis, University of Berkeley, ca, 1984, pp. 1ff.
27. M. Godet, The third-body approach: a mechanical view of wear, Wear, 100 (1984) 437-452.
28. M. Godet and Y. Berthier, Forgotten parameters which govern wear, Proc. Conf. Int. Coll. on Wear Resistant Materials, 23-25 November 1983, St. Etienne, France, Ecole Nationale Superieure des Mines, 158 Cours Fauriel, 42023 Saint-Etienne, France, 1983, pp. 1-3.
29. M. Godet, Y. Berthier, J. Lancaster and L. Vincent, Wear modelling, using fundamental understanding or practical experience? ASME Symp. Tribological Modelling for Mechanical Designers, 23 May 1990, San Francisco, CA, private communication, 1990.
30. H. Heshmat, O. Pinkus and M. Godet, On a common tribological mechanism between interacting surfaces, Tribology Trans., 32(1) (1989) 32-41.
31. A. Iwabuchi, The role of oxide particles for the fretting wear of mild steels, in K.C. Ludema (ed.), Proc. Conf. Wear of Materials 1991, 7-11 April 1991, Orlando, FL, ASME, 345 East 47th Street, New York, NY 10017, 1991, pp. 49-54.
32. A. Iwabuchi, H. Kubosawa and K. Hori, The effect of oxide particles supplied at the interface before sliding in the severe-mild wear transition, Wear, 128 (1988) 123-137.
33. A. Iwabuchi, H. Kubosawa and K. Hori, The dependence of the transition from severe to mild wear on load and surface roughness when the oxide particles are supplied before sliding, Wear, 139 (1990) 319-333.
34. Y. Berthier and D. Play, Wear mechanisms in oscillating bearings, Wear, 75 (1982) 369-387.
35. A. Misra and I. Finnie, Correlation between two-body and three-body abrasion and erosion of metals, Wear, 68 (1981) 33-39.