Reassessment and requalification of infrastructure: Application to offshore structures

Journal of Infrastructure Systems

Volumn 2, Issue 2, 1996, Pages 45-53

  Bea, R G ^a,b  

^a ASCE ^*

^b 109 McLaughlin Hall   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DECISION THEORY; DYNAMICS; FAILURE ANALYSIS; PROBABILITY; SAFETY FACTOR; STRUCTURAL LOADS;

FOUR TIER REASSESSMENT; INFRASTRUCTURE; LOAD CAPACITY; QUALITATIVE SCORING PROCESS; REQUALIFICATION; RESERVE STRENGTH RATIO;

OFFSHORE STRUCTURES;

DESIGN; OFFSHORE PLATFORM; STRUCTURE;

EID: 0030154771     PISSN: 10760342     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)1076-0342(1996)2:2(45)     Document Type: Article

References (40)

1. American Petroleum Institute. (1993). "Recommended practice for planning, designing and constructing fixed offshore platforms - working stress design." API Recommended Practice 2A (RP 2A-WSD), 20th Ed., Washington, D.C.
2. American Petroleum Institute. (1995). "Assessment of existing platforms." API RP 2A-WSD, 20th Ed., Sect. 17.0, Washington, D.C.
3. Banon, H., Bea, R. G., Bruen, F. J., Cornell, C. A., Krieger, W. F., and Stewart, D. A. (1994). "Assessing fitness for purpose of offshore platforms I: analytical methods and inspections." J. Struct. Engrg., ASCE, 120(12), 3595-3633.
4. Bea, R. G. (1991). "Offshore platform reliability acceptance criteria." J. Drilling Engrg., June, 131-137.
5. Bea, R. G. (1992a). "Requalification of offshore platforms." Proc., Civ. Engrg. in the Oceans V, ASCE, New York, N.Y., 427-443.
6. Bea, R. G. (1992b). "Seismic design and requalification methodologies for offshore platforms." Proc., Int. Workshop on Seismic Design and Requalification of Offshore Struct., California Inst. of Technol., Pasadena, Calif., 1-34.
7. Bea, R. G. (1992c). "Structural reliability: design and requalification of offshore platforms." Proc., Int. Workshop on Reliability of Offshore Operations; NIST Spec. Publ. 833, E. Simiu, ed., Nat. Inst. of Standards and Technol., Washington, D.C., 41-67.
8. Bea, R. G. (1993a). "Evaluation of uncertainties in loadings on offshore structures due to extreme environmental conditions." J. Offshore Mech. and Arctic Engrg., Vol. 115, 237-245.
9. Bea, R. G. (1993b). "Reliability based requalification criteria for offshore platforms." Proc., 12th Int. Conf. on Offshore Mech. and Arctic Engrs., Am. Soc. of Mech. Engrs., New York, N.Y., 351-361.
10. Bea, R. G. (1995). "Probability based earthquake load and resistance factor design criteria for offshore platforms." Proc., Int. Workshop on Wind and Earthquake Engrg. for Coastal and Offshore Fac., Univ. of California at Berkeley, Calif., 1-23.
11. Bea, R. G., and Craig, M. J. K. (1993). "Developments in the assessment and requalification of offshore platforms." Proc., Offshore Technol. Conf., OTC-7138, Soc. of Petroleum Engrs., Richardson, Tex., 1-19.
12. Bea, R. G., Landeis, B. T., and Craig, M. J. K. (1992). "Requalification of a platform in Cook Inlet, Alaska," Proc., Offshore Technol. Conf., OTC-6935, Soc. of Petroleum Engrs., Richardson, Tex., 551-562.
13. Bea, R. G., Litton, R. W., and Vaish, A. (1985). "Requalification of existing platforms." Proc., Offshore Technol. Conf., OTC-4858, Soc. of Petroleum Engrs., Richardson, Tex., Vol. 1, 163-175.
14. Bea, R. G., and Mortazavi, M. M. (1995). "Simplified evaluation of the capacities of template-type offshore platforms." Proc., 5th Int. Offshore and Polar Engrg. Conf., Paper No. 95-JSC-214, Offshore and Polar Engrg. Soc., The Hague, The Netherlands, 1-13.
15. Bea, R. G., Mortazavi, M. M., Loch, K. J., and Young, P. L. (1995). "Verification of a simplified method to evaluate the capacities of template-type platforms." Proc., Offshore Technol. Conf., OTC-7780, Soc. of Petroleum Engrs., Richardson, Tex., 755-769.
16. Bea, R. G., Puskar, F. J., Smith, C., and Spencer, J. (1988). "Development of AIM (assessment, inspection, maintenance) programs for fixed and mobile offshore platforms." Proc., Offshore Technol. Conf., OTC-5703, Soc. of Petroleum Engrs., Richardson, Tex., 193-205.
17. Bea, R. G., and Young, C. (1993). "Loading and capacity effects on platform performance in extreme condition storm waves and earthquakes." Proc., Offshore Technol. Conf., OTC-7140, Soc. of Petroleum Engrs., Richardson, Tex., 1-18.
18. Craig, M. J. K., and Digre, K. A. (1994). "Assessments of high consequence platforms - issues and applications." Proc., Offshore Technol. Conf., OTC-7138, Soc. of Petroleum Engrs., Richardson, Tex., 169-178.
19. De, R. S. (1995). "Risk analysis methodology for developing design and assessment criteria for fixed offshore structures." Proc., Offshore Technol. Conf., OTC-7755, Soc. of Petroleum Engrs., Richardson, Tex., 543-548.
20. Digre, K. A., Krieger, W., Wisch, D. J., and Petrauskas, C. (1994). "API RA 2A draft section 17 assessment of existing platforms." Proc., 7th Int. Conf. on the Behavior of Offshore Struct., Elsevier Science Publishing Co., Inc., New York, N.Y., 467-478.
21. Dunlap, W., and Ibbs, W., eds. (1993). Proc., Int. Workshop on Reassessment and Requalification of Offshore Production Struct., Nat. Inst. of Standards and Technol., Washington, D.C.
22. Frieze, P. A. (1993). "Determination of platform overall reliability given reserve strength ratio (RSR)." Rep. Prepared for Offshore Safety Division, Health and Safety Executive (HSE). London, England.
23. Fu, S. L., Petrauskas, C., Botelho, D. L. R., Carter, E. W., Basaluda, E. A., and Abbott, B. J. (1992). "Evaluation of environmental criteria for Gulf of Mexico platform design." Proc., Offshore Technol. Conf., OTC-6834, Soc. of Petroleum Engrs., Richardson, Tex., 243-252.
24. Hellan, O., Moan, T., and Drange, S. O. (1994). "Use of nonlinear pushover analyses in ultimate limit state design and integrity assessment of jacket structures." Proc., 7th Int. Conf. on the Behavior of Offshore Struct., Vol. 3, Elsevier Science Publishing Co., Inc., New York, N.Y., 323-345.
25. Iwan, W. D. Theil, C. C. Jr., Housner, G. W., and Cornell, C. A. (1992). "Seismic safety requalification of offshore platforms." Rep. Prepared for American Petroleum Institute, American Petroleum Institute, Dallas, Tex.
26. Kallaby, J., Lee, G., Crawford, C., Light, L., Dolan, D., and Chen, J. H. (1994). "Structural assessment of existing platforms." Proc., Offshore Technol. Conf., OTC-7483, Soc. of Petroleum Engrs., Richardson, Tex., 141-154.
27. Kallaby, J., and O'Connor, P. E. (1994). "An integrated approach for underwater survey and damage assessment of offshore platforms." Proc., Offshore Technol. Conf., OTC-7487, Soc. of Petroleum Engrs., Richardson, Tex., 189-202.
28. Krieger, W. F., Banon, H., Lloyd, J. R., De, R. S., Digre, K. A., Nair, D., Irick, J. T., and Guynes, S. J. (1994). "Process for assessment of existing platforms to determine their fitness for purposes." Proc., Offshore Technol. Conf., OTC-7482, Soc. of Petroleum Engrs., Richardson, Tex., 131-140.
29. Marshall, P. W. (1992). "Screening old offshore platforms: previous approaches and further thoughts." Proc., Civ. Engrg. in the Oceans V, ASCE, New York, N.Y., 518-530.
30. Marshall, P. W. (1994). "Reassessment of criteria for requalification." Proc., 7th Int. Conf. on the Behavior of Offshore Struct., Vol. 3, Structures, Elsevier Science Publishing Co., Inc., New York, N.Y., 495-513.
31. Martindale, R. B., Krieger, W. F., Paulson, S. K., Hong, S. T., Petrauskas, C., Hsu, T. M., and Peffer, E. (1989). "Strength/risk assessment and repair optimization for aging, low-consequence, offshore fixed platforms." Proc., Offshore Technol. Conf., OTC-5931, Soc. of Petroleum Engrs., Richardson, Tex., 493-502.
32. Miller, T. M., Dolan, D. K., Eskijian, M. L., and Craig, M. J. K. (1991). "Requalification of an older California platform: API and risk-based approaches." Proc., Offshore Technol. Conf., OTC-6648, Soc. of Petroleum Engrs., Richardson, Tex., 1-18.
33. Olufsen, A., and Bea, R. G. (1990). "Loading uncertainties in extreme waves." J. Marine Struct., Vol. 3, London, England., 237-260.
34. Petrauskas, C., Finnigan, T. D., Heideman, J. C., Vogel, M., Santala, M., and Berek, G. P. (1994). "Metocean criteria/loads for use in assessment of existing offshore platforms." Proc., Offshore Technol. Conf., OTC-7484, Soc. of Petroleum Engrs., Richardson, Tex., 155-167.
35. Stewart, G., Efthymiou, M., and Vugts, J. H. (1988). "Ultimate strength and integrity assessment of fixed offshore platforms." Proc., Int. Conf. on Behavior of Offshore Struct., Tapir Publishers, Trondheim, Norway, 1-17.
36. Turner, J. W., Wisch, D. J., and Guynes, S. J. (1994). "A review of operations and mitigation methods for offshore platforms." Proc., Offshore Technol. Conf., OTC-7486, Soc. of Petroleum Engrs., Richardson, Tex., 179-188.
37. Vannan, M. T., Thompson, H. M., Griffin, J. J., and Gelpi, S. L. (1994). "An automated procedure for platform strength assessment." Proc., Offshore Technol. Conf., OTC-7474, Soc. of Petroleum Engrs., Richardson, Tex., 55-64.
38. Vugts, J. H. (1993). "Integrity assessments - towards the development of a rational approach." Proc., Integrity of Offshore Struct. Symp., Univ. of Glasgow, Glasgow, Scotland, 1-30.
39. Wen, Y. K. (1988). "Environmental event combination criteria, phase I: risk analysis." Rep. Prepared for American Petroleum Institute, American Petroleum Institute, Dallas, Tex.
40. Wen, Y. K. (1990). "Environmental event combination criteria, phase II: design calibration and directionality effect." Rep. Prepared for American Petroleum Institute, American Petroleum Institute, Dallas, Tex.